ActiveSync 4.5

[bepash]

I've successfully upgraded my Qtek 9090 to WM6 Pro (5.2.16.20)
-
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42

All works great, but still I can't connect to ActiveSync 4.5

When I put the Qtek 9090 on cradle it ask to install Activesync 4.5 or newer ... but I've installed (and reinstalled) this tool, downloaded directly from MS site.

I've also Updated all the components on PC (SO, Office, etc ..) with Microsoft Update. But still I've this problem.

Please, could you give me any help ?

Thanks in advance.
Beppe
-

[quistler]

i got the same problem!
my 9090 says:
cannot open the connection usb, this connection is no longer valid ore exist, plz select a diffrent :confused:

it worked until now ;)

[Matscher]

Sorry, my English is bad. But I try to help because I had the same problem.

Which firewall is installed?
With the change of WM2003 on WM6 new rules must be allocated for ActiveSync.
Several ports (999, 5678 etc.) must be switched free or turn the firewall off for testing!
Simply turning off the network monitor at the Comodo Firewall.

Good luck!

Mathias

[bepash]

My Qtek 9090 ask for Activesync 4.5 or newer while connecting.

I have just tried with another PC with XP on board and a fresh copy of Activesync 4.5 - Same problem (ask for 4.5 or newer)

I'm quite sure the problem is on PDA.

I hope in some suggestion.
Thanks to all.

Beppe
-

[evoluzionne]

do search on the forum.. you'll find what you need..

cheers
evo

[xplode]

check\uncheck in USB to PC - Enable advanced network funkcionality try which one of them will work with your pc

[bepash]

RESOLVED !!! (Yeahhh)
The problem was on network properties of Qtek, when connected.

Right-click (in control-panel/network-connection) the Qtek entry / Then properties

- check only tcp/ip protocol and MS network services
- I've disabled bindings for VPN and packet-trace utility

Activesync 4.5 WORKS GREAT NOW
Have a nice WM6 upgrade.

Beppe
-