View Full Version : Bricked (Tri-color) Touch Dual - Help!
bodonline
2nd September 2008, 11:16 PM
Apologies but have scoured all the threads and cannot seem to get to a straight answer!
Have a tocuh-dual which I attempted to update to the latest ROM from HTC and now I have the "tri-colour screen of death!) and can get no further,
The screen shows in thered band - RUUNBH | NIKI100 | SPL-1.16.0000 | CPLD-4. The white band shows "serial" and when I connect the USB lead it shows "USB".
But the PC does not recognise it at all and when I try to load a ROM or run MTTY nothing is found. How can I run a program on the touch if the PC will noit see it through the USB connection?
Any ideas?
riogrande100
2nd September 2008, 11:39 PM
Does your PC have active Sync installed? I had a similar problem when I installed a broken rom that would not boot up. I did a device reset using the stylus in the whole next to the USB, while holding the camera and power button to boot into the tri color screen. Once hear i plugged in my USB cable and ran a ROM install.
I hope this helps.
Valvarin
3rd September 2008, 01:09 AM
uncheck allow usb-connection in Active Sync
run mtty connect by USB
type "boot" without quotes.
The Buzzer
3rd September 2008, 01:29 AM
i have got the same problem and can't get out of the tri-colour.
I try to connect with mtty and it says usb port cannot open. my pc can recognise it and in da phone it shows usb though, i don't really know why its not taking. if i type "boot" in mtty what will happen? cos when i click on com3 its opening but when i write "boot" nothing happening even with boot. any ideas guys? how to solve the problem????:mad:
Regards
Valvarin
3rd September 2008, 03:50 AM
u have to unckeck allow usb connection in active sync! then u can connect with mtty
bodonline
3rd September 2008, 07:53 AM
Just one point - I am using Vista which does not use Activesync but Sync Centre and that does not give you the option to disable as far as I can see?
The Buzzer
3rd September 2008, 03:26 PM
Just one point - I am using Vista which does not use Activesync but Sync Centre and that does not give you the option to disable as far as I can see?
Use xp mate, cos vista has got some problems. normally for unlocking and upgrading i use xp. blow up the vista .
Regards
bodonline
3rd September 2008, 05:10 PM
I will crank one up and let you know how it goes!
Valvarin
3rd September 2008, 06:35 PM
kill the task in the Task Manager... then u can connect with mtty:rolleyes:
bodonline
6th September 2008, 12:13 PM
Tried killing the process but MTTY still says "USB port cannot open" - no idea what else to do?
NetrunnerAT
7th September 2008, 12:51 PM
If any Program use the USB Port ... no other Program can use the USB at the same time!
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.