PDA

View Full Version : The calls came and appear in the display but with out any sound .


sortlaih
9th September 2008, 01:25 PM
Hi

I face problem with my (Cruise)Polaris , some times I missed a calls because the calls came and appear in the display but with out any sound .

Polaris ROM: udK Diamond R7

/Regards

bikerg
9th September 2008, 01:32 PM
Check your USB port isnt damaged.
Mine got cracked and I lost sound in my calls.

sortlaih
9th September 2008, 02:39 PM
Check your USB port isnt damaged.
Mine got cracked and I lost sound in my calls.

Thankx for your reply...

It's in a good condition , also it's happened from time to time.


/Regards

ovidiaconescu
9th September 2008, 03:07 PM
Are you sure you don't just have the phone ring volume turned off?

When you are chaning the sound volume, there is a second bar right next to it. Make sure that's all the way up!

sortlaih
10th September 2008, 01:53 AM
Hi

In fact we faced this problem in two devices, its come and go as I said from time to time .

Thankx

/Regards

Rroet
10th September 2008, 01:49 PM
is that only in phone mode, or also on speakermode ?

I had that issue, I got mine replaced. It was working on speakerphone, but wasn't working on normal phonemode.


Rroet

ayman morsy
10th September 2008, 09:50 PM
for me its happened 2 times

i made only hard reset

and the ringer working just fine after that

Wingmaker101
11th September 2008, 04:33 AM
is that only in phone mode, or also on speakermode ?

I had that issue, I got mine replaced. It was working on speakerphone, but wasn't working on normal phonemode.


Rroet
I have exactly the same problem, suspected it's the ear speaker defect. Now sent to warranty claim. :mad:

sortlaih
11th September 2008, 02:34 PM
is that only in phone mode, or also on speakermode ?

I had that issue, I got mine replaced. It was working on speakerphone, but wasn't working on normal phonemode.


Rroet

In fact I'm using only normal phonemode...

Regards

jbuffy
11th September 2008, 10:34 PM
Do you use S2P? I have the same problem when I use S2P : After a call, I have not sound anymore (no ring, no music....) for 5 or 10 minutes?
Somebody have a solution?

angelearth
12th September 2008, 08:57 AM
Hi, this happens to me from time to time too (and my mb has been ALREADY replaced once).
I cooked udK Diamond r8 rom, hard resetted and found that I could not make any call: incoming were muted and outcoming made the speaker buzz (murata radio 1.58.25.14)
I reverted to pdaviet and everything seems to work now, that's why I thing that this should be a sw problem.

pako1
16th September 2008, 09:49 PM
sames problem after install udK Syrius WWE. Before a had BEPE ROM and it was perfect.

My problem is that i come back to bepe 0.67 ITA and the problem is the same:(
Wath must i do?

angelearth
17th September 2008, 08:58 AM
Try murata radio, it cures most (but not all :mad: ) issues of that incredibly overpriced piece of crap named HTC Touch Cruise.

lantisy
17th September 2008, 01:54 PM
i had a problem to use R8 actually,
The calls came and appear in the display but with out any sound. also, the camara is not working

i am using R8 + 1.59 radio rom, but i also testing M2D as well... :P

i am thinking of the M2D problem for the sound.

but camara mode is definally had problem after using R8....

lantisy
17th September 2008, 01:55 PM
Try murata radio, it cures most (but not all :mad: ) issues of that incredibly overpriced piece of crap named HTC Touch Cruise.



Downloding it now ~~
however, my batter is under 50% now ~~~sign ~~~
will report after this

eddytheeagle
17th September 2008, 02:07 PM
I had the exact same problem after flashing with the latest radio rom provided by UdK. Check this thread: http://forum.xda-developers.com/showthread.php?t=373233 for the latest rom that actually works. After flashing to the latest rom in this thread, everything worked again.

catzi
17th September 2008, 09:52 PM
I think if you flash to Udk Syrius R0 you will get the 1.59 radio. If you subsequently downgrade to UDk Diamond R7 or R8 the radio remains at 1.59 (the Diamond roms don't contain Radio ROMs). 1.59 is incompatible with WM6.0 roms. You need to flash to another radio version or you will have sound problems. That was certainly my experience.

lantisy
18th September 2008, 12:51 AM
hi.... it seems that better if i change the Radio Rom to 1.64.08.21

http://forum.xda-developers.com/showthread.php?t=379599

you might update the Radio rom to solve the problem....

both Camara and reciption problem seem solve....

but i will still test today ~

Sorry ,,, i am just a 3 days experience for using cooked rom ~

webwizard
18th September 2008, 01:58 AM
Hey,

I got the very same problem after I got rid of Syrius R0 and going back to UdK Dimaond R8. I used the original ROM to fix the problem and then went back to UdK Dimaond R8 :-)

I look forward to the next release of Syrius!

lantisy
18th September 2008, 10:36 AM
hi there, i have been use the 1.64.08.21 radio rom....today....

the signal is not so good .... somtime it will hang up automatically
the reciption is always just 1 or 2 only (maximum is 3 at outside)

and if i open loud speaker, the person who talk to me will receive many many loud sound ... even i am in a silence room....

who can recommand a good radio rom ? thanks

bobesch
19th September 2008, 05:32 PM
I had the same problems with sound and camera, now I have Rom: 3.13.456.32 WWE from PDAVIET and radio version: 1.59.42.15 and everything is ok, its a good Rom. I stay with this rom until udk cook new syrius rom.