PDA

View Full Version : [RADIO]HTC RAPHAEL RADIO on DIAMOND US 3G


charly_mx
12th September 2008, 05:34 PM
Hello there. I was wondering. Is the radio or driver that is being used in the Raphel could be used in the Diamond to enable US 3G??

I just saw that the HTC Raphael supports GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100 band and the hardware that is uses it 32bit Qualcomm MSM7201A that is the same onboard the Diamond.

So I guess, when can give it a try with Raphaels Radio. What do you think?

Sergio PC
12th September 2008, 05:38 PM
Hello there. I was wondering. Is the radio or driver that is being used in the Raphel could be used in the Diamond to enable US 3G??

I just saw that the HTC Raphael supports GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS2100 band and the hardware that is uses it 32bit Qualcomm MSM7201A that is the same onboard the Diamond.

So I guess, when can give it a try with Raphaels Radio. What do you think?

I think its a Kick assss idea!
Please do Sir!:D

palmbluetooth
12th September 2008, 06:34 PM
Take a look at this thread, it seems that there is some security code on the radios to work only on the designated devices, altough theorically it should work on the other one.

http://forum.xda-developers.com/showthread.php?t=420769

charly_mx
12th September 2008, 07:14 PM
oh well i think i dont going to brick my phone forcing a radio to be installed if its not meant for the diamond... mmhhh just a shame

kevinniven
12th September 2008, 07:14 PM
That should work!!!???

gioiellino
12th September 2008, 08:04 PM
I HAVE TRYED but appear a error message that say ID_DEVICE ERROR

djvw
12th September 2008, 09:57 PM
Take a look at the Diamond Radio thread over here:

http://forum.xda-developers.com/showthread.php?t=407956

The Radios from Bepe have been taken from the Raphael an can be flashed on the diamond without bricking the device. Just give it a try.

I don't know how good or bad 1.03.25.18 runs on the diamond, but I know there were stability issues with 1.02.25.11.

rl66
14th September 2008, 02:46 PM
Take a look at the Diamond Radio thread over here:

http://forum.xda-developers.com/showthread.php?t=407956

The Radios from Bepe have been taken from the Raphael an can be flashed on the diamond without bricking the device. Just give it a try.

I don't know how good or bad 1.03.25.18 runs on the diamond, but I know there were stability issues with 1.02.25.11.

1.03.25.18 run very well but there is some few freeze when double call... ennoying...

farfanet
14th September 2008, 09:20 PM
I tested the radio 1.03.25.18 and it doesnt work with 3g with telcel...

athanaso77
9th October 2008, 11:56 AM
Does anyone have a link of the original Raphael 1.03.25.18 radio?

frozenwaffles
9th October 2008, 12:15 PM
isnt US 3G 850Mhz??? its not listed in the first post...esp considering the touch pro does no do 850Mhz at all?!?!?!