help hermes 100 shutdown for good

[gmenelau]

i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.

any one can help me out

thanks

[kareeem]

Did you have hardspl prior to installing the ROM? Anyhow, running your carrier stock ROM should get you going ;) Then you can install any ROM you want (give that you have hardspl).

[gmenelau]

What do you mean running me carrier stock ROM ? I cant connect it with the pc to do something and the screen is black when i try to restart or when i reinstall the battary in again. but in the screen it show me the 3 colors in a very dark light no lights in the buttons are working.
And there is not red led when i connect with usb cable

[hermes1971]

i try to install new rom , after it restart it showed the 3 colors on the screen and from then it went off and it show the colors in a very dark light. and i cant flash or start the windows,also it doesnt restart.

any one can help me out

thanks

u r PC able to detect u r phone?
(i mean when u plug u r device to computer, it will automatically detect the device, and phone display will show USB instead of SERIAL)
if yes, u may install Hard-SPL-V7 Olipro V7 2.10 (file attached) with Force Unsafe SSPL (not recommended) option selected.
if u managed to do this, u will be able to flash any rom and u r phone not gonna brick any more.

[gmenelau]

No the computert it can not detect the device . :(

[gmenelau]

No the computert it can not detect the device .

[hermes1971]

No the computert it can not detect the device .

how about in boot loader mode? is u r computer able to detect phone? (u will C USB mode displayed in tri color screen)

boot loader mode : hold u r OK button (near wheel) + power button and use styles in reset hole....keep that way till u c the tri color boot loader screen

[ultramag69]

Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...

Cheers...:D

Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...

[gmenelau]

i try what you said expet the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the caple it start for a sec., and then it shut down ...

[gmenelau]

Also make sure you untick "Allow usb connections" in activesync connection settings on the pc. Also reset into bootloader mode.
You may have hardware as well as rom trouble if you can "see" the bootloader in darkness. I had the same trouble that turned out to be the flywheel needing replacement. Hopefully you won't have these problems...

Cheers...:D

Also , on the tri-colour screen, can you make out what the IPL and SPL are? To fix this you need Hard SPL(if hard SPL will be 2.10 olipro) installed and without it this could soon become a nightmare and you could become bald from frustration...

I cant see anything i am sorry .Ii try what you said exept the one for the flywheel ! still nothing , i also i notice that the led for the battery when i connect it with the usb or the cable it start for a sec., and then it shut down ...