PDA

View Full Version : Killed my Tytn 2 ?


tabaz
19th September 2008, 01:02 AM
Hi guys, i have probably killed my beloved kaiser.
This is what i did:
- Flashed latest Hyperdragon III Rom - all worked fine here
- Sometime later i figured out that the phone was not able to connect to my PC anymore (tried different computer and cable, no change: unknown usb device)
- I then entered boot loader and tried to flash an older rom (Garmin DK 3) but it stopped at 16% and i had to enter boot loader again.

The result:
Now no pc is detecting the tytn 2 correctly (unkown usb device) on boot loader screen. I guess that the usb port on the phone is somehow damaged. Any suggestions ?

Harsesis
19th September 2008, 01:12 AM
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader

there u go

Loco5150
19th September 2008, 01:13 AM
I just want to say that your phone not connecting was a simple thing.

JimmyMcGee
19th September 2008, 01:19 AM
Moved to apropos section.

DaIn BrAmAgE
19th September 2008, 02:27 AM
- Sometime later i figured out that the phone was not able to connect to my PC anymore (tried different computer and cable, no change: unknown usb device)


Did you try deleting your sync settings?
Delete device from sync list.
unplug/replug usb. setup device again.

Or I have also had to un & re install Active-sync.

Hope this helps

tabaz
19th September 2008, 08:36 AM
nonono .. its not that active sync is not working anymore, its that windows detects the device either as unknown device (on bootloader screen!) or does not detect it at all. I even cant select USB in mtty.exe - active sync disabled. Iam pretty much sure its an usb port issue since my tytn2 have had always problem with usb cons (did not recharge and stuff). Before that issue my pc had detected the tytn2 in bootloader screen.

DaveShaw
19th September 2008, 10:27 AM
nonono .. its not that active sync is not working anymore, its that windows detects the device either as unknown device (on bootloader screen!) or does not detect it at all. I even cant select USB in mtty.exe - active sync disabled. Iam pretty much sure its an usb port issue since my tytn2 have had always problem with usb cons (did not recharge and stuff). Before that issue my pc had detected the tytn2 in bootloader screen.

Try another USB cable. I have a faulty cable at work and my phone disconnects from AS all the time. At home, no problems :)

Dave

tabaz
19th September 2008, 10:58 AM
i have tried several usb cable on several computer - same problem.

DaveShaw
19th September 2008, 11:07 AM
i have tried several usb cable on several computer - same problem.

Oh well, it worth a shot.:)

Dave