Basic help to upgrading

[olgamarie]

Good people,

I thought I was stuborn and smart enough to follow your instructions to upgrade my old Tytn to WM6.1, but I think i lack the basic understanding. The only thing I am sure I have managed to do is to app-unlock the device. I also half-succeeded in installing a bootloader (SPL1.04). It shows a wonderful screen of four colors every now and then. But every attempt to go fro there to install WM6.1 or anything else (currently trying to install from SD), it goes through that screen and that is where it stops. Can you help me with the basics, what am I missing?

[ultramag69]

If the SPL on the tri-colour screen (bootloader) says 2.10 olipro you've done the best thing, if not then your in for some major hair pulling and a lot of reading...

Assuming you've got SPL 2.10 olipro & a charged battery......


1). Format an sd card fat32. Copy the .nbh file of the os you want and rename to "hermimg.nbh". Put back in phone.
2). Reset to bootloader - hold power, ok button above flywheel and reset with stylus. If you have formatted fat32 (NOT FAT) & the nbh file has been renamed properly, it should detect the flash file.
3). Follow instructions on screen....

This will fix your problem.

Cheers....:D