stuck!!

[OKJAM]

Hi,, I have used shelltool to install TNT 6.1 from wizlove all went smooth
Then i decided to try a different radio so flashed 02.71.11 from o2.37.11
all went smooth no problem,, It wasnt a day and I had to get rid of 02.71.11
so tried flashing to others and ruu loses conection on status bar and screen goes into the tri col mode,, since then I have tried to do hard spl and it gets as far as the white screen and then ruu says lost connection, so I used shelltool to flash back to wizlove but after reboot stuck on splash screen
I can get into the tri colour bootloader screen the usb shows but cant get any connection to ruu
Im G4, ipl 2.16.0001
spl 2.16.0001
gsm 02.71.11
os 2.26.10.2

help me please head is sore from reading too much
Thanks

[zabardast_1]

What IPL/SPL it displays now and which windows are you doing on? If its vista it won't work.WinXP is highly recommended for HardSPL.Don't use Shelltool go for HardSPL or SoftSPL.

[OKJAM]

What IPL/SPL it displays now and which windows are you doing on? If its vista it won't work.WinXP is highly recommended for HardSPL.Don't use Shelltool go for HardSPL or SoftSPL.

ipl spl as posted,,,,,I have already used shelltool to load TNT and then I tried to run hard spl but ruu says lost conection on white screen so I used shelltool to go back to wizlove but on reboot it is stuck on splash screen, and Im on xp

[zabardast_1]

Ah ! yes,its G4,ok,HardSPL won't work in Bootloaders (tricolor) it'll only work if working OS is running.
Which windows are you on vista or winxp ?

[OKJAM]

Im on xp,, but as I have posted Im now stuck on splash screen

[+ Que PPC]

So try to reflash an original ROM dont install wizlove (it wont be a diference but...) in RGB try to run the RUU from original EXE package id dont works is almost bricked.

Try to get a backup from another device fully functional following the steps indicated by Drug store on splash screen stucks solution DIY thread if dont works or you dont have a backup Minisd so try the MTTY...

[OKJAM]

I am CID locked G4

[zabardast_1]

Download Official k-jam stock rom from the below link and flash it in Bootloaders,recover back to default status and than proceed further:-
http://www.imate.com/Support_DeviceSupport.aspx

G4 devices cannot be CID unlocked like a G3 phones,in this situation only official stock rom will get flashed,it contains IPL/SPL for both the devices,it shud flash and work.Than after recovering back ,Apply 'HardSPL' to semi-CID unlock the phone and upgrade to any wm6 rom,don't use Shelltool,it sometimes creates problem.

I don't think Backup rom through minisd with MTTY will work in this situation, but than, thats me !

[OKJAM]

OK I got the official rom, but same problem RUU says it hasnt got a connection the phone is in tricol boot load at this time, I think the issue is how to get a comunication between the RUU and the wizard in in Tricol mode surely someone has an answer on this?

[+ Que PPC]

When you plug your device via usb in the pc port the dev shows USB bottom left on screen... ? Does the PC shows you "Unknown device, please intall the drivers... or has a bad function"?

The USB cable... maybe your battery is low.... maybe the USB PORT... i dont imagine anymore problems... Try to get a full batt.. other USB cable and other PC XP of course... and retry.

[OKJAM]

OK a glimmer of hope,, I switched to another usb port windows loaded driver etc, then i ran the official rom ruu and,,,,,,,,,,,,,invalid ID cant run this utility,
does this mean I need the original software and how would I know what version that was,,,,,,,,cause I wasnt making notes

[+ Que PPC]

OK a glimmer of hope,, I switched to another usb port windows loaded driver etc, then i ran the official rom ruu and,,,,,,,,,,,,,invalid ID cant run this utility,
does this mean I need the original software and how would I know what version that was,,,,,,,,cause I wasnt making notes

FIIIUUUUU!!! it seem that you have comm conection betwen the RUU and the device... but Wrong ID?

Download the file zabardast told you... it is from your carrier.
If this is the one u have tried...
so try another one... from Tmobile prodigy 2.26... or from qtek 9100 2.19 official Stock ROMS.

[zabardast_1]

OK a glimmer of hope,, I switched to another usb port windows loaded driver etc, then i ran the official rom ruu and,,,,,,,,,,,,,invalid ID cant run this utility,
does this mean I need the original software and how would I know what version that was,,,,,,,,cause I wasnt making notes
hmmm,ok,download this RUU attached and extract it, replace this RUU with the RUU in the official rom and run this RUU from the Rom,hope it'll flash.
Or,download the K-jam official stock rom from here :-
ftp://ftp.clubimate.com/K-JAM_WWE_21...20710_ship.zip

[OKJAM]

I tried all that and still not getting anywhere, constantly the same problem re connection I do get the found new hardware when trying different usb ports but the ruu complains " no connection" I cant seem to get what it did before in terms of getting further to the point where it told me invalid ID I will have to try another pc with xp but dont have one handy

[Sussex_Chris]

check out this thread, it might be of help