SPL 1.10

[cowballz69]

anyone know what rom is compatible with athe100 SPL 1.10 ?

i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?

[responderman]

anyone know what rom is compatible with athe100 SPL 1.10 ?

i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?

Have you took the sim card and memory card out?????
Jay

[cowballz69]

yes they are both out when tryign to flash, been over a week with out a working athena:confused:

[lakeman]

yes they are both out when tryign to flash, been over a week with out a working athena:confused:

try flashing your original ROM which should be found in the wiki section.

ignore what I said below and report back if you were able to load your original ROM


***Ignore this read above**Once your phone is working , do the athena wrapper which should load SPL 1.2
Also read this
http://forum.xda-developers.com/showthread.php?t=429013

[cowballz69]

yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,


thank u guys so much for responding on my issue

I also tryed doing the unlocker and its a no go

[sergiopi]

If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33

[lakeman]

yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,


thank u guys so much for responding on my issue

I also tryed doing the unlocker and its a no go

I think this means your phone is not unlocked
with respect to sergiopi , you cant do the mtty script.
I would suggest you msg cmonex or try to talk to her on IRC on the
dxa-devs channel
addendum
seeing that you have nothing to lose, why dont you try flashing the original rom from the sd card using the method in the wiki

[felix999]

anyone know what rom is compatible with athe100 SPL 1.10 ?

i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?

I have the same problem.
what I do...

I have ameo t-mobile...windows mobile 5.0
run AthenaUnlocker
Step 1 make all finish noc problem
Step 2 hung up on 60 %
bootloader no problem....but can´t flash original flash always stuck at 1% and reboot...
flashing the original rom from the sd card using the method in the wiki ...
make it, but no do...on screen see

cheking...
loading....

than come on screen
0002802

ching...

loading...

not allowed

[felix999]

If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33

My error when it stops at 1% is "invalid vender id"

my image version is demaged

Re: Ameo from t-Mobile german - repair
________________________________________
hi

what is your CID? use mtty command "info 2" to find out.

for example, if it is TMOB_007, you have to find a shipped athena rom with that CID.

if you cannot find a matching rom, let me know, i can still help,

cmonex

HTCS Þ?ÒtHTCE


please need halp

thx
felix999

[lakeman]

read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM

[felix999]

read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM

in mtty this can read:
when type task 32
become LEVEL: FF

when type info 2:
HTCS Þ?ÒtHTCE

my CID is 1.1

on bootscreen can see this:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.10.RP00

what I do before...

Ameo WM 5.0 >>>>my mistake not update to WM6.0
run AthenaUnlocker
STEP1>>>OK
STEP2>>>by 60 % hang and stopped....
and now have the big problems.....Image ROM of t-Mobile 5.0 german demaged
can´t flash any rom´s

thx for hel or I want to pay bucks for service, when ma ameo live again...

felix999

[felix999]

read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM

this is my CID

Cmd>info 2
info 2
Wait interpreter timeout
HTCS Þ?ÒtHTCE
????????

don´t know
felix999

[felix999]

become today a answer from crazy cat, that olipro say must take an rom in athena forum....
I flaswh with so many roms...anytime same error: error 294 - invalid vendor ID.....

My SPL 1.10 >>> can´t find a rom with SPL 1.10

what rom can repair my demaged ameo?????:confused::confused:

thx for help

felix999


problem solved with ONLINEHELP from>>>>>cmonex>>>><<:::P:::>><<:::E:::>><<:::R:::>><<:::F:::>><<:::E:::>><<:::C:::>><<:::T:::>>

thx
felix999

[lakeman]

try flashing your original ROM which should be found in the wiki section.



Is this how you solved your problem?