Another one bricked!

[hackey100]

Hi guys, first post, but I've been lurking for a while.

I was updating my Radio form .05 to .08 using the DIAMIMG file and the reset with vol down and back key. It gets to about 80% and freezes. Now when I had to reset it goes to the red green blue and white screen and says:

"Upgrade Rom code error Please try again"

Serial

I have been unable to get a usb connection to the handset.

I think I'm all out of ideas and I have spent the last few hours trying to find a fix :confused:

[zoom82]

just flash anything else like a os, etc.

I thinks it solves the problem.

It did for me btw.

i flashed org rom update with os and radio and it solved my problem.

[hackey100]

the issue is the I can't get diamoncustomruu.exe to find my phone. windows need a qualcomm driver of some sort, although my Ubuntu system gets the hand set to show usb instead of serial, but wine cannout run diamoncustomruu.exe in a windows wrapper. Mayber I'll have better luck in vista instead of xp?

[hackey100]

Zoom, would you be able to run through the process you went through to recover please, including the OS and what files you used?

At the minute I have Olinex 1.40 and Dutty 2.5 on here. It is somewhere between radio .05 and .08 lol.

Thanks for any help!

[zoom82]

Ive just installed the Official rom update from htc site.

My screen was stuck in the three colored screen with update error but the rom update solved it.

I just run the official update from there (3colored screen).

And in some how it worked.

Then i reinstalled the custom os, radio etc.

btw i have Hardspl 1.93OliNex UnsignedEdition

Hope it will help you, it worked for me, maby not 4 u but if it does congratualtions :)

[thuglife]

i got my diamond bricked no power at all in it no reset and hard reset is not working and cant get to bootloader has any one a solution thanx in advance

[hackey100]

I can now get it to boot and show the following:

PSOC-Diam STAGE_PVT v0x32

Upgrade Rom code error
Please try again

USB

windows not detects the devide (i think)

[patterns]

when the phone is stuck in boot load ahev you tried:

1 - soft reset with red button by stylus?

2 - hard reset manually?

3 - turn phone off, plug in to usb, turn on does it still not recognise? reinstall activesync

4 - have you tried flashing radios, other roms, reflashing hard spl?

does your phone just not get recognised at all?

ive had this problem a few times not just with the diamond, and i alwasy managed to fix

also some roms have an option when you download and unpack to just run rom update, it enters mdos and goes straight to rom update, i.e. it doesnt have the on screen prompts, this may bypass the problem too - i think SWTOS or SWIFTfl roms are like this, or try an original rom

if you are really not getting any response try resets

thats about all the info i cazn offer.

last resort, have you insurance?

[zoom82]

I can now get it to boot and show the following:

PSOC-Diam STAGE_PVT v0x32

Upgrade Rom code error
Please try again

USB

windows not detects the devide (i think)

try to reflash from there

[hackey100]

when I try to reflash with .08 from Dutty's site i get error 260 Connection in the utility.

Should I try MTTY or QMAT and if so, can somebody point me in the direction of how to use these, and where to find them.

thanks for your help so far.

[hackey100]

yeaaahhhhhh:) all fixed,god I hat Vista sometimes :D

see you all when I'm back on Ubuntu :)

[NielDK]

Since you had it working in Linux (the USB) and you seem to preffereble wanna use Linux ;). There is a Google Project page with an HTC Flasher for Linux. Also there is a ROM Kitchen Project, among others :)

http://code.google.com/p/htc-flasher/w/list

[salada2k]

yeaaahhhhhh:) all fixed,god I hat Vista sometimes :D

see you all when I'm back on Ubuntu :)

Maybe you'd like to share with everyone what you did to fix it, to help others?

[hackey100]

All I did was run the RUU Upgrade Utility in Windows Vista. Because i was able to detect the USB device in XP but couldn't write to it, I thought that it may be driver related.

Vista detected the handset as a USB device correctly and I was able to flash it with a new radio and then Dutty's new ROM.

I tried minicom and HTCFLASH in Ubuntu and was able to detect the device, but when I tried to write a new rom the progress bar in Linux completed, but the phone didn't change.

It's all good now, I'm just happy it didin't break. :)

[zoom82]

Im glad it worked 4 u =)

always nice 2 could help a little bit :-P

[salada2k]

Wow, now there's a headline:

XP FAILS, LINUX LIES. VISTA SAVES THE DAY!

Stop the press!

Tell your friends!

:)

[hackey100]

in fairness, it is a windows mobile device so I'm not entirely surprised!

[tommm]

Had the same probs few times with xp (activesync) with Vista everythin goes regulary;) Now I don´t use xp for flashing anymore:D

[alessiomasini]

Ciao ragazzi,
vi scrivo per chiedervi aiuto, perché pure il mio Diamond è bloccato.

La situazione è questa: dovendo portare il Diamond (della 3) in assistenza, ripristinai tutto originale (ROM, Radio e HSPL). Poi ieri sera, ho avuto la brillante idea di ripersonalizzarmelo. Flasho l'HSPL 1.37 Olinex, e va tutto bene; flasho la ROM Min.74 Y2 v.2.2 FULL, e va tutto bene; flasho la Radio 1.17.25.09, e mi si bricka il Diamond, riportandomi il seguente messaggio:

DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again

Ho provato a fare un soft reset, niente;
Ho spento (togliendo la batteria) sperando che mi passasse da serial a USB, collegandolo al PC, niente;
Ho spento, collegato al PC e riacceso, niente, non va in modalità USB.

Il sistema operativo del mio PC è Windows 7 64bit; sul portatile ho XP: se accendo mentre è collegato al portatile, il portatile lo sente, ma non riesce a trovare i driver Qualcomm ecc.. ecc...

Insomma, ho il telefono bloccato e non so come uscire da questa situazione!

HELP!

--- --- ---

GOOGLE TRANSLATE

Hello guys,
I am writing to ask for help, because even my Diamond is locked.

The situation is this: having to carry the Diamond (of 3) in support, I restored all the original (ROM, Radio and HSPL). Then last night I had the bright idea of repersonalization. Flash the HSPL Olinex 1:37, and all is well, flash the ROM v.2.2 FULL Min.74 Y2, and all is well, flash the Radio 1.17.25.09, and I blocked the Diamond, returning the following message:

DIAM100 64M
SPL-1.37.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again

I tried to do a soft reset, nothing;
I turned off (by removing the battery) and hope that I might pass from serial to USB, PC connection, nothing;
I turned off, connected to the PC and turned on, nothing in USB mode.

The operating system on my PC is Windows 7 64bit, I have XP on the laptop: if I turn on while connected to the laptop, the laptop feels, but can not find drivers Qualcomm etc...

In short, I have the phone locked and I can not get out of this situation!

HELP!

[helicopter88]

Try to boot in bootloader mode the phone,and from there connect to usb and try to flash original radio
If you succed flash hard spl 1.40 or 1.93

[alessiomasini]

Try to boot in bootloader mode the phone,and from there connect to usb and try to flash original radio
If you succed flash hard spl 1.40 or 1.93

Come dicevo sopra, nessuno dei due PC che ho riconosce il Diamond, quindi non posso flashare niente! :(

--- ---

As I said above, neither the PC recognizes the Diamond, so I can not flash anything! :(

[helicopter88]

Come dicevo sopra, nessuno dei due PC che ho riconosce il Diamond, quindi non posso flashare niente! :(

--- ---

As I said above, neither the PC recognizes the Diamond, so I can not flash anything! :(

uhmm....for windows 7 x64 you need to press f8 before the windows boot animation and choose disable driver enforcement
For windows xp i don't know
Try to install again Activesync

[tampitzel]

Hi guys, first post, but I've been lurking for a while.

I was updating my Radio form .05 to .08 using the DIAMIMG file and the reset with vol down and back key. It gets to about 80% and freezes. Now when I had to reset it goes to the red green blue and white screen and says:

"Upgrade Rom code error Please try again"

Serial

I have been unable to get a usb connection to the handset.

I think I'm all out of ideas and I have spent the last few hours trying to find a fix :confused:

Not bricked, you just need to use MTTY format, then when the whole phone is empty install a rom using the RUU from one of the builds.

in order to be able to use mtty you DO need the qualcomm driver, also you need to prevent active sync inside your computer to syncronize via usb connection cuz that will prevent mtty from interracting to the phone.
http://forum.xda-developers.com/showthread.php?t=540290 -> its all here, including the drivers you need :) read thru , then act !

[alessiomasini]

uhmm....for windows 7 x64 you need to press f8 before the windows boot animation and choose disable driver enforcement
For windows xp i don't know
Try to install again Activesync

No windows boot animation. As I turned on the device, appear the three color screen with the error message... :(

[helicopter88]

No windows boot animation. As I turned on the device, appear the three color screen with the error message... :(
I forgot to say,Pc windows boot animation,for the drivers check the post above

[alessiomasini]

I've pressed F8, nothing. Pressed F2 (bios options), not found the voice: disable driver enforcement. I've installed the Windows 7 64bit drivers, from the post above, nothing happens... I'm losing hope....

[helicopter88]

I've pressed F8, nothing. Pressed F2 (bios options), not found the voice: disable driver enforcement. I've installed the Windows 7 64bit drivers, from the post above, nothing happens... I'm losing hope....

Strange,the settings isn't in bios

Accendi il computer,e inizia a premere tante volte F8,prima o poi apparirà un menu,dove ti fa scegliere se vuoi aprire modalità provvisoria,altre opzioni
e una delle ultime è quella che toglie l'obbligo di firma nei driver

[alessiomasini]

Ok, l'ho fatto.... poi? Ho collegato il Diamond, ma non lo "sente"...

Ok, done. And now? I connected the Diamond, but the PC not feel it...

[helicopter88]

Ok, l'ho fatto.... poi? Ho collegato il Diamond, ma non lo "sente"...

Ok, done. And now? I connected the Diamond, but the PC not feel it...

Try to install the drivers now,with the pc booted in disable driver enforcement

[alessiomasini]

Installati i drivers... il PC lo riconosce... Flashato HSPL 1.90... Flashata Radio 1.00.25.05... è ripartitoooooo! GRAZIEEEE!!

Drivers installed.. the PC can feel it... HSPL 1.90 flashed... Radio 1.00.25.05 flashed... Diamond RESTARTED!! THANKSSSS!!!

Now, what ROM you suggest??

[helicopter88]

Installati i drivers... il PC lo riconosce... Flashato HSPL 1.90... Flashata Radio 1.00.25.05... è ripartitoooooo! GRAZIEEEE!!

Drivers installed.. the PC can feel it... HSPL 1.90 flashed... Radio 1.00.25.05 flashed... Diamond RESTARTED!! THANKSSSS!!!

Hspl 1.90?
I use 1.40 but 1.93 solves a screen flickering issue,for the radio i don't know,i use 1.17.25.9 and it's working

[alessiomasini]

Ok, 1.40 Flashed.
Now, what ROM you suggest?

[meteorain08]

Just download any ROM which contains the CustomRUU.exe, then plug your device in the PC, open the CustomRUU.exe and do the rest. Make sure you've installed Active Sync 4.5 or Windows Device Center already :) peace and good luck :)

[helicopter88]

Ok, 1.40 Flashed.
Now, what ROM you suggest?

I use energy rom,them are full of apps and are really nice looking,but the main problem is ram usage,it's really high but you can solve it easily disabling wm 6.5 start menu
I use more android,as i'm an android chef and if you want more infos
http://forum.xda-developers.com/showthread.php?t=907509

[alessiomasini]

I use energy rom,them are full of apps and are really nice looking,but the main problem is ram usage,it's really high but you can solve it easily disabling wm 6.5 start menu
I use more android,as i'm an android chef and if you want more infos
http://forum.xda-developers.com/showthread.php?t=907509

I've this ROM installed, but is full of bugs! The sms menù are corrupted, no phone keyboard type, and the Ram usage are incredible!

[helicopter88]

I've this ROM installed, but is full of bugs! The sms menù are corrupted, no phone keyboard type, and the Ram usage are incredible!

I have Jan 6 and is nice,but no phone keypad(i don't use it) and ram free is 40 mb