You are subscribed to this thread Imate JasJar Enterin Bootloader mode.Turnon fail

[ZODI]

Hello Everyone,

I am not a professional or anything i am just a student.So kindly when you use the terminology make sure its understandable for a person with less knowledge about unlocking and stuff.

Ok here goes my problem, Its an I-mate Jasjar and its not turning on when i press the Power button. It shows USB on top and V1.00 when entering Bootloader mode. I dont know what am i suppose to do after that as i ran into a professional guy on msn and he showed me how to get into bootloader mode and he is too busy to help me out so i am here.

What i did was Its battery was low and i tried to Hard Reset it and now it wont turn on.

So any help is much appreciated :)

[chasmanian]

instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader

instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

[orb3000]

instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader

instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

Well said!

In the Wiki you can find a lot of usefull help!

[ZODI]

http://i34.tinypic.com/9ux1qe.jpg

This is the Error i am getting when i followed Method 2 .

Kindly tell me what am i doing wrong i already Unchecked the USB connection in ActiveSync ....Whatelse am i suppose to do...please guys i really love this phone and cant wait to use it again.


Thanks.
ZODI.

[buzz_lightyear]

hi ZODI,
you better kill the ActiveSync all together by using windows tak manager. I mean to kill the process called wcescom.exe on your PC.

Then reconnect your UNIVERSAL.
Wait a bit, then have a look in PC's Device Manager, if your UNIVERSAL was recognised and it should be listed within USB devices as HTC USB Sync or similar.

If so, then do a reflash one more time.

good luck
buzz

[buzz_lightyear]

Hi ZODI,
you'd better kill ActiveSync all the way down, by using windows task manager.

- disconnect your UNIVERSAL
- kill wcescomm.exe process on your PC
- connect your UNI again and wait a bit
- check if display shows USB at the top of the screen
- in PC's Device Manager check, if the device driver (HTC USB Sync) was loaded

If all done, proceed and do a ROM REFLASH.
If not, you may also check at http://buzzdev.net/list.php?40 mainly those two sticky posts at the top.

good luck
buzz

[ZODI]

Ok giving it a try ....hope it works this time and thanks.

[ZODI]

Ok giving it a try ....hope it works this time and thanks.

Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt reboot.

http://i36.tinypic.com/344c9op.jpg

[ZODI]

Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt boot.


http://i36.tinypic.com/344c9op.jpg

I think i am gonna have find a Service centre and spend huge amount of my pocket money in just getting my phone to work :(

[ZODI]

OMG .... i DID IT !!!!!!!!!!!! omg thanks guys i love you all

Love ya buzz from the bottom of my heart THANKS BRO !!!! and each and everyone of ya <3