HardSPL on version SPL-2.03

[oscarolim]

Hi.

I have the Hermes PDA, however it has the SPL version 2.03, and (I assume is because of this), i cant apply the hardSPL so i could use roms based on win6.1

Is there a way to fix the situation?

Thanks

[ultramag69]

Go to post 1160 on page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722

Its the sd card method. Please follow it step by step as if you miss one thing you're not gonna succeed.

SD card method requires an sd card 2Gb or smaller. The bootloader won't recognise the card otherwise.

Cheers...:D

[boog]

Go to post 1160 on page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722

Its the sd card method. Please follow it step by step as if you miss one thing you're not gonna succeed.

SD card method requires an sd card 2Gb or smaller. The bootloader won't recognise the card otherwise.

Cheers...:D

And it has to be formatted FAT32, most seem to come as just FAT (found that out after trying to figure out why mine wouldn't flash).

[ultramag69]

Funnily enough, I find this in the link I posted above -

"3. copy it to a microsd card, make sure the card is formatted as fat32"

As I said, don't skip steps as they are ALL important....:mad:

[oscarolim]

I'll do this today after the dentist nightmare, and tell you how it goes :)

[boog]

Funnily enough, I find this in the link I posted above -

"3. copy it to a microsd card, make sure the card is formatted as fat32"

As I said, don't skip steps as they are ALL important....:mad:

Sorry, I wasn't meaning it as a knock towards you. Just pointing out to make sure it is, because I messed it up. Actually I was surprised to find it formatted to FAT and not FAT 32 by the factory.

[oscarolim]

Thanks to all of you, it worked :)