to pof&olipro plz read hermes brick

[elsokary]

hi
i have jasjam herm100
ipl-101
spl-203
no gsm
m 05
s 04
b 06
d 1.20
when i try to flash 1% and error
when i use kitl-pp nothing happend not open stay on windows mobile
when power on i see HTC thin i-mate thin stay on windows mobile
what can i do

first:i try with KITL
i try step by step but after Attach device
give me that

you do not have enough ram
(CoreCon) 03:06:21 10/30/2008 Egypt Standard Time: Failed to connect debug message service! Please check the transport settings.
(CoreCon) 03:06:21 10/30/2008 Egypt Standard Time: Transport service failed to connect
(CoreCon) 03:06:21 10/30/2008 Egypt Standard Time: Warning: One or more services failed to connect. Make sure that the service is properly configured.
Warning: Debugger service map is set to none. If your image has debugging support it may not boot properly.
Cannot access selected Device from service host.
The Kernel Debugger is waiting to connect with target.
Debugger could not initialize connection.
The Kernel Debugger has been disconnected successfully.
0 PID:0 TID:0 05/01/2006 07:49:01
0 PID:0 TID:0 [K :: KERNEL]
0 PID:0 TID:0 HTC Nand Read!
0 PID:0 TID:0 05/01/2006 07:49:05
0 PID:0 TID:0 [K :: KERNEL]
0 PID:0 TID:0 Kernel: EEPROM signature=50 12 EE 0 2
0 PID:0 TID:0 05/01/2006 07:49:05
0 PID:0 TID:0 [K :: KERNEL]
0 PID:0 TID:0
OEMInit: The CRC Checksum of 2M is 0x8d3245f8
0 PID:0 TID:0 05/01/2006 07:49:05
0 PID:0 TID:0 [K :: KERNEL]
0 PID:0 TID:0 +ShowGSMVersion()
0 PID:0 TID:0 05/01/2006 07:49:05
0 PID:0 TID:0 [K :: KERNEL]
0 PID:0 TID:0 +SCInitSerial
28070 PID:237d1442 TID:c3629f16 [D :: BATTERY]
28072 PID:237d1442 TID:c3629f16 gBootw
45817 PID:237d1442 TID:834a4f8a <Ser_Cmd>Log file init Error!
73736 PID:237d1442 TID:8359f4b2 WiFi is currently on, so turn it off.
73742 PID:237d1442 TID:8359f4b2 +TIWL: OID_PNP_SET_POWER
73744 PID:237d1442 TID:8359f4b2 b
73787 PID:237d1442 TID:8359f4b2 -TIWL: OID_PNP_SET_POWER
78803 PID:237d1442 TID:4329bfc2 05/01/2006 07:50:35
78808 PID:237d1442 TID:4329bfc2 [D :: MISC]
78810 PID:237d1442 TID:4329bfc2 OEMMiscThread-API not ready!
78812 PID:237d1442 TID:43292eea 05/01/2006 07:50:35
78814 PID:237d1442 TID:43292eea [D :: MISC]
78816 PID:237d1442 TID:43292eea PMMT-API not ready!

and nothing happend after 1 hour phone stay on windows mobile

itry to flash but no help stop in 1%

i try with mtty also no help


Cmd>task 28
Storage format start

Write Nand Success

dwBlockToWrite = 13

Storage start block: 460

Storage Total block: 476

Total Bad Block in CE: 0

NeedToEraseBlockStart: 473

NeedToEraseBlockEnd: 936

Storage format success

Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation

CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6



Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3F8(1016) is Reversed block

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19C00
Partition[3], type=0x4, start=0x1CC00, total=0x1DC00

CE Total Length(with sector info) = 0x3A66000
CE CheckSum Length(without sector info) = 0x3980000


so now what some one tell me its hardwear so ????????????????????
help

[elsokary]

No Answer ?????????

[ultramag69]

Try to flash with your SHIPPED STOCK ROM... This has a small chance of success, no guarantees...
Untick "Allow USB Connections" in Active Sync settings.
Go into Bootloader on Hermes and attach to PC on USB.
Doubleclick RUU_Wrapper.exe and follow the prompts...

If it doesn't restore your Radio ROM then you may need to use the Rom Koch tool (available through search on wiki) to remove the radio ROM out of the flash so you can at least use it as a PDA. Also, install Hard SPL onto it after recovery.

There is a major problem with recovering the Radio ROM that doesn't seem to be solvable. Good luck cos you're gonna need it...

Cheers...:D