[URGENT] Can´t Flash my Trinity

[rei007]

Hello my Trinity Maniacs friends;),

This is my first post and, unfortunately, is not for the best reasons.
I made a flash to my PDA for WM 6.1 ROM edition Elegance 2.14 (Build 5.2.19213 OS 19213.1.0.0) of the cooker ROM user eliasweb. Everything went all right as it was supposed to be. The problem was when I tried to do again the flash of PDA and can not do that. When we see the display of several colors to achieve the flash there appears SERIAL instead of USB and I can not do the flash.

Somebody help me? I already tried to contact eliasweb but i had no success. Excuse my bad English.

[rei007]

why nobody helps me?:(

[tomme45i]

why nobody helps me?:(

I think you should try to flash your Trinity from SDCard: http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing

[stepw]

Reinsert USB cable and make sure activesync is disabled on your PC.
You use cooked ROMs at your own risk, so don't expect eliasweb or whoever else to be there instantly to help you with your troubles.

[rei007]

I think you should try to flash your Trinity from SDCard: http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing

When I try to flash my Trinity from SDCard the bootloader start to being black. Don't know why...

Reinsert USB cable and make sure activesync is disabled on your PC.
You use cooked ROMs at your own risk, so don't expect eliasweb or whoever else to be there instantly to help you with your troubles.

I know that when i use cooked ROMs I'm at my own risk. I only try to contact eliasweb because he could have a solution. He could have had the same problem when he had tried is own rom and he could have the solution. The problem that I have passed throught is when de Trinity bootloader start the flash don't continues. Could you tell me why? :cool:

[tomme45i]

You have of course Hard-SPL inside your Trinity :confused: If not, then this is first thing you must to do.

[rei007]

You have of course Hard-SPL inside your Trinity :confused: If not, then this is first thing you must to do.

How so? Where can I have access to this information on how to put the Hard-SPL inside my Trinity? I'm still making my first steps in the area of PDAs. Could you be more specific?:confused:

[tomme45i]

Before flashing your trinity you should flash Hard-SPL. Here is full guide how to do that: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66. You might have only SSPL before and therefore you have flashed your Trinity succeed.

[rei007]

Before flashing your trinity you should flash Hard-SPL. Here is full guide how to do that: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66. You might have only SSPL before and therefore you have flashed your Trinity succeed.

As I had already said on my initial post I can't flash the rom. On the full guide that you gave me i can't do the step 9 because the trinity stays on the red, green, blue and white screen saying on the bottom serial instead of USB and on the PC appears the error of Lost Connection.

On the bootloader appear the following text:

TRIN100
IPL-0.50

TRIN100
SPL-1.07.0000

serial

What could you say about that?:(

[tomme45i]

On the bootloader appear the following text:

TRIN100
IPL-0.50

TRIN100
SPL-1.07.0000


You definitely doesn't have Hard-SPL, so you can try this method: http://forum.xda-developers.com/showthread.php?t=441787
One more thing, you said that after connect trinity to computer you have on screen Serial, not USB, did you try it on another cable/computer:confused: cause it looks like your computer doesn't see your trinity at all.

[rei007]

You definitely doesn't have Hard-SPL, so you can try this method: http://forum.xda-developers.com/showthread.php?t=441787
One more thing, you said that after connect trinity to computer you have on screen Serial, not USB, did you try it on another cable/computer:confused: cause it looks like your computer doesn't see your trinity at all.

Hmm... I will try that method when i went home but if i remeber i tried something like that method and when i boot my trinity via SD the bootload red, green, blue and white screen appears and then it start being black and don't start anything. My miniSD Card is one of 2Gb of the trademark A-DATA. I already tried it with another cable, computer and operating system(XP, VISTA, MAC and LINUX).

Thanks for all the help. I hope you can help me to solve this problem.:)

[tomme45i]

Hmm... I will try that method when i went home but if i remeber i tried something like that method and when i boot my trinity via SD the bootload red, green, blue and white screen appears and then it start being black and don't start anything.

Yes but before you doesn't have SSPL/Hard-SPL on your device. It's very important, so try this method at home and tell as your results :)

[rei007]

Yes but before you doesn't have SSPL/Hard-SPL on your device. It's very important, so try this method at home and tell as your results :)

one last question. i have to do that with my miniSD card or via USB cable?

[tomme45i]

i have to do that with my miniSD card or via USB cable?

Via miniSD card.

[rei007]

Via miniSD card.

Problem solved. Thanks for the help. All the links you have gave to me let me know the answer to my problems. Now i can flash my PDA via miniSD. Just have to format de miniSD in FAT32 and not in FAT mode.

Thanks one more time.