dead kaiser after flash

[mobilend]

probably, i dowgrade my kaiser with lower version...(everything passed(unlock,flash)without problem and error...
after flash phone dead... nothing happen when try to power on,reset,boot,anything...try,almost 4 hour, everything what can find here, but still no luck...
no power, no bootloader, even i can't do anything with mtty couse i run Vista, and have prob to stop activesync working... everything what i got is
ZTE diagnosstics interface 6000 cdma 1x(com5)
zte nmea device cdma 1x (com6)
in my control panel/device manager,
that talking maybe phone is not totaly damage...
anyone help, any idea...this will be long long night...

[Gudul]

I'm not sure what you mean exactly but I also had a dead Kaiser. It did not happen after flashing but my phone suddenly turned off and could never be turned on again. I first thought it was a battery issue but no.
Finally I returned it to HTC and they replaced the motherboard under warranty.

[mobilend]

yes but my kaiser is not in warranty, customer buy it in Italy... and I kill him, sad but true...

[pyrorob]

well i might not be correct, bu it looks like you wiped the nand on the phone... i think if you look up the steps in the frankenkaiser thread it should help you out

[mobilend]

but i can't go in bootloader mode....

[pyrorob]

if you look you dont have to enter bootloader mode..: http://forum.xda-developers.com/showthread.php?t=394584

[mobilend]

ok, first , from now i'm on XP...
but always same... when attach in any button combination to the pc, it was always see the same, look on the pic
and in MTTY, i have the port from 1 to 10 &usb. on usb cannot connect, with the error "usb port can not open"

btw forgot to write, device is brand new, no hw damage

[mobilend]

i make connection between kaiser and MTTY, over diagnostics port, but when try to type command(or Enter) nothing happens. how to use MTTY

[mobilend]

as i see my kaiser stuck in download mode... (see in QPST & QMAT)... how to flash it or to restore it to normal mode(phone no power on, no going to boot mode)... i read emi&sbi, if it can help some...

[pyrorob]

if you look here from step 3 down i think this should walk you thru the process... http://forum.xda-developers.com/showthread.php?t=393337
if you look at the part right below step 2 it says to lower your com port for the diagnostic interface below 10, i think i saw that yours is set to 53...

[mobilend]

i try on 3 differnet pc. try all comm port. mtty is my problem(one of them). when run mmty(choose connection base on diagnostic port), i can type anything, any command, enter,etc... nothing on screen, nothing happen after enter...

[mobilend]

can someone explane how to flash kaiser via jtag...
someone who allready do it... ;)

or send me to pm

[scholbert]

Hi mobilend,

i just saw your message... no idea about that!
Don't know if anybody already traced the testpoints.
You also would need some software tools to access the MSM chip.

Maybe i'm wrong but i read some threads about this kind of brick and maybe your able to recover without JTAG.
Perhaps the kaiser cracks could help you out :o

Regards,

scholbert

[mobilend]

i do nothing since today...
if somebody have idea how to unbrick kaiser with jtag, write here or i may send device to him...

[ureo73]

Hi excuse you have succeeded there?
I have yours same problem.

[jonastamborin]

:confused:

This is my fear, for this reason I have not had the courage to update my ROM. :cool:

I do not understand, the videos appear to be so simple, but at the same time, to read topics like these, I am in panic ...

Will I still be aware and courageous enough to update my ROM?

:eek:

[DaveShaw]

:confused:

This is my fear, for this reason I have not had the courage to update my ROM. :cool:

I do not understand, the videos appear to be so simple, but at the same time, to read topics like these, I am in panic ...

Will I still be aware and courageous enough to update my ROM?

:eek:

Most of the problems come from not reading the information...

If you look at the number of users on here that have managed to upgrade their phone you will see that it way outways the number of people who have truly bricked thier phone. (A lot of the people who have upgraded thier phone have little knowledge about what unlocking means as well, so don't worry if it's a bit overwelming).

If you want to get started click "KAIS: Getting started" in my sig for a step by step guide by mskip. mskip, myself and some other members will help out with any questions you post in that thread. Also check out the info on the HTC Kaiser wiki page on the xda-developers wiki page.

Ta
Dave