HELP 730v HELP trying...... to get to WM6.1

[a011528]

:eek: Assistance required by a Guru.
USB + Power + active synch (MDC)

I’ve used
Herm Unlock v3
Magic Unlocker
CheetahUnlocker

They all run ok

I’m pretty sure the device is unlocked!

SD card is FAT32, CHEEIMG.nbh resides at the root.

Reset + left button

Rainbow screen appears

CHEE100
IPL-0.20

CHEE100
SPL-1.40.01iNex

And that is as far as It gets!!!!
it just sits there and does nothing can anyone assist ?

[superhiperclim]

:eek: Assistance required by a Guru.
And that is as far as It gets!!!!
it just sits there and does nothing can anyone assist ?

Actualy you should first understand that even if your Trëo is compatible with wm6.1 you must be sure that it is compatible with the rom that you are trying to install,
Next you should try to download the rom again so you can be sure that the rom you are trying to load is not corrupted...
and if all this is done you will probably need to try out the USBcable install mode!

Realy hope that you can solve your problem
[[]]

[a011528]

ROM, is the third different source (same version) to ensure no corruption.

USBcable install mode, can you provide any further details?

[superhiperclim]

ROM, is the third different source (same version) to ensure no corruption.

USBcable install mode, can you provide any further details?
:confused:
strange that you can't install that, it's usually very simple and fast...
let me see if I understand, you are saying that you are trying to install the file when it is connected to your computer but the "cheeming" is on the SD card?!
If that's what you are doing just unplug the USB cable, you can't sync and use your SD at the same time... Just use the POWER cable and repeat all the process...:D

If that doesn't work for you, you should create a folder on your computer desktop and copy the "cheeming" to that folder, next copy whatever program you have used to change the SPL to that same folder.
Make a backup of the original files from your mobile, I hope you wont need them, but you should backup anyway...
then run the program and "cross your fingers"...
in about 5 or less minutes it should be done, and your treo should be runing your new WM6.1
This is the "risky" :( way, because you can "brick" your Treo, and I can assure you that it isn't easy to "unbrick"! :eek:
Hope you can do it with the SDcard method.
If I can help in any other way, please post or add on msn.

superhiperclim@hotmail.com

[nuwayman]

couple things to do. download a kaiser custom ruu. unrar or unzip your new rom you want to flash. best to have seperate folder to do this. rename the rom file to RUU_signed.nbh then run the kaiser ruu and follow the steps. very simple to do. make sure active sync is enabled before doing this.