Can't flash Kaiser HardSPL in any way???

[mendoza]

Iv'e tryed to flash HardSPL to Kaiser... Downloaded various unlockers/flashers, even SD card solution... When trying to flash over usb with some Kaiser-HardSPL.exe - after entering tricolor mode and when progressbar appears it always stuck on 0%, and nothing happens... Update utility shows error (Rom update utility encountered communication error or smth.) and sugests me to do recovery. Tryed everything - SoftSpl1.56, Softspl1.93, SSpl-kais...

Other method i've tryed - SD card
Iv'e followed instructions, formatted card, copied those two files (http://forum.xda-developers.com/showthread.php?t=420683) to sd card, but after resetting Kaiser it only shows "Loading..." and hangs... no restart, nothing... just "loading..." on screen...

Bootloader menu shows following versions:
KAIS130
SPL-3.29.0000
CPLD-8

[mendoza]

somehow... after trying another 1000 -th time... it just flashed...

[jacques.botma]

Have exactly the same problem, tried all other solutions! any idea on what the last method was that worked?

[vp3G]

When flashing via USB it will hang at 0% (and fail w/ 260 error on PC side) if the SD card is left in. I've made that mistake more than once. :o

Remember to remove SIM, too.

[Biker182]

I don't have sd card and I've got the same problem...
Any ideas?

[Vytelo]

I have the same problem. I want to upgrade Hard SPL 3.24 to newer version. I always get 262 error. Also tried all possible ways (MicroSD uses FAT32, but I didn't formatted It, because I don't have SD adapter).
Sometimes It's shown that flashing complete, but HardSPL version still is the same.

[latinohot]

FOLLOW THE DIRECTIONS

http://forum.xda-developers.com/showthread.php?t=396922

[Biker182]

latinohot, I'm doing all right...
EDIT:
I changed cable, and it went for the first time

[latinohot]

latinohot, I'm doing all right...
EDIT:
I changed cable, and it went for the first time

good, also check the contact pins, sometimes they get bent.

[sabzi43]

i STILL can't get hardspl to work at all...just get stuck at 0% :(

[WarByte]

i STILL can't get hardspl to work at all...just get stuck at 0% :(

Are you using sspl to upgrade? sim and sd out? usb cable or sd flash? Do you already have a hspl and are just upgrading?

If you're on an original spl you must use sspl to do it.
If you're upgrading then you can use the kaisdiag file by cmonex and an sd.

[sabzi43]

Are you using sspl to upgrade? sim and sd out? usb cable or sd flash? Do you already have a hspl and are just upgrading?

If you're on an original spl you must use sspl to do it.
If you're upgrading then you can use the kaisdiag file by cmonex and an sd.
I'm using usb to windows 7, sim and sd were out.
The thing is i've never done this before, but i am pretty sure i have it down...

I tried this I think 3 times then started to panic when after the recover from the freeze, i noticed things being weird, so i hard reset so i still have a functioning phone until i figure this out.

(it still has bugs it never had before :/)

ive downloaded numorous hardspls, all didnt work.

it's been one saaaaaaaaaaaad experience cuz i really want to make this happen and brag to my guy friends I FLASHED MY PHONE.

and get win 6.5, of course.

any help much appreciated!!!!!!! :D

[Hakim Rahman]

I'm using usb to windows 7, sim and sd were out.
The thing is i've never done this before, but i am pretty sure i have it down...

I tried this I think 3 times then started to panic when after the recover from the freeze, i noticed things being weird, so i hard reset so i still have a functioning phone until i figure this out.

(it still has bugs it never had before :/)

ive downloaded numorous hardspls, all didnt work.

it's been one saaaaaaaaaaaad experience cuz i really want to make this happen and brag to my guy friends I FLASHED MY PHONE.

and get win 6.5, of course.

any help much appreciated!!!!!!! :D

copy sspl.exe into your device and run it then you can flash with CustomRUU

to much better you are using ActiveSync on Windows XP :)

[sabzi43]

Thanks so much!!! i got it to work!!!! i actually used a jump spl instead, but i now am running win 6.5 on my kaiser!!!!!!! and i'm beyond stoked :)

THANKS Y'ALL!