Flashing rom without Activesync

[tduf1]

Hi all,

How to flash the rom for a Wizard G4 without activesync (only with the bootloader mode)??

I had and error with my previous update and i need to re-install it in bootloader mode...

Thanks in advance,
TD.

[zabardast_1]

Simply,get the phone in Bootloaders by pressing Camera + soft reset,it'll go into Bootloaders (RGB) and hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloader Screen,if its there just run the RUU in the rom,it'll start to flash.:)

[CRACING]

Simply,get the phone in Bootloaders by pressing Camera + soft reset,it'll go into Bootloaders (RGB) and hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloader Screen,if its there just run the RUU in the rom,it'll start to flash.:)

No, Its comm manager + camara + softreset...........:D

[tduf1]

Yes, my Wizard is in bootloader mode (the usb indicator is here), but when I run the RUU, no device is detected (it's normal because RUU needs activesync connection) !!! Same effect with the official ROM !!

Please help...

for your information, when my it re-boot it is blocked on:
IPL 2.17.0001
SPL 2.17.0001
GSM 02.07.10
OS 6.1.0.0

Thx,
TD.

[Ather]

erm i always press the camera button and softreset and it gives me a RGB :)

[mrobo]

Simply,get the phone in Bootloaders by pressing Camera + soft reset,it'll go into Bootloaders (RGB) and hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloader Screen,if its there just run the RUU in the rom,it'll start to flash.:)

yes it works !

[akashastrega]

Perhaps you can try the sd card method, but one of the guru's here would have to confirm that. When my usb was busted, that method was suggested to me (click the link in my siggy). I don't have a G4, so I am not sure if the sd method would even work, but it is worth a read, and like I said, perhaps one of the guru's could confirm or deny this method.

[tduf1]

How to flash with SD? Do you have a link to do this?
Thx,
TD.

[cristi_bv]

hello everyone!

Untill a few minutes ago I had a similar struggle; my Activesync connection was down exactly when I wanted to flash my device; I read all what was readable and after trying to flash tie new rom from the card, i just realised that if i press the usb cable firmly into a direction, the device suddently got recognised. SO, i guess that too much use of the usb port gets electrical contacts to get loose.