PDA

View Full Version : Igo 8.3.1 & Diamond Help !!!!


JAYmasta
19th November 2008, 11:05 AM
I have trouble with run igo I correct (sys.txt) for run on storage card also I correct for resolution but when I run igo it's appear and shut down after appear for half second every 10 seconds and disapear help what's wrong.
I have version without exe - I use autorun installation after exe appear on the diamond in programs files. I copy this exe in folder with program ....

Howell
19th November 2008, 11:07 AM
You're not using Igo for Diamond (I had the same problem)... Where did you get this version ?

4D3
19th November 2008, 12:48 PM
I have trouble with run igo I correct (sys.txt) for run on storage card also I correct for resolution but when I run igo it's appear and shut down after appear for half second every 10 seconds and disapear help what's wrong.
I have version without exe - I use autorun installation after exe appear on the diamond in programs files. I copy this exe in folder with program ....

I have iGO8 8.3.1 working fine, post your sys.txt.

also you should know that version 8.3.1 is NO WAY NEAR as good as 8.0.49 or 8.0.59 there are so many features missing on the 8.3.1!!

for example:

auto capitalisation missing in 8.3.1
longer GPS fix time
cannot change the trip meter when no route is active, it only displays compass and altitude
speedcams done show up all the time
much heavier on phone resources


PM me if you need more help!!(technically iGo 8 isnt for the diamond (yet), so may get in trouble talking here!!)

ghiatti1
19th November 2008, 04:55 PM
I have iGo 8.3.1 running perfectly on my device. I copied everything in the internal memory then ran installation from 2577 folder. No need to change sys.txt. Everything runs fine. I run Igo clicking on igo.exe in the igo8 folder

BloodyCkickenSoup
19th November 2008, 05:18 PM
I suggest going with 8.0.x either rather than trying 8.3. It was very unstable and laggy on my diamond. Theres no need to try. The new features are not worth the stress. Pity is, that the new map versions dont work with 8.0.x. But that will be a matter of time, i think...

Belzebuth.
19th November 2008, 09:24 PM
Remove this you will be banned!!!

He means: the link...:mad:

No problem for the sys.txt

But, please, NO WAREZ on this forum...:cool:

jdoggraz
19th November 2008, 09:34 PM
He means: the link...:mad:

No problem for the sys.txt

But, please, NO WAREZ on this forum...:cool:

Removed, no WAREZ allowed. Next WAREZ post will result in ban. Thank you.

JAYmasta
19th November 2008, 11:16 PM
I repeat when I donwload igo was 2 folder inside one autorun inside second almost program without (exe) I started autorun and go process instalation after exe appear in program files directory. afer I create folder on the Internal Storage (Igo8) I've copy this exe inside this folder and all files from second folder, and change sys.txt like this :
[folders]
app="Internal Storage\igo8"
sdcardapp="Internal Storage\igo8"
sdcardpath="\Interal Storage"
data="\Internal Storage\igo8"
content="\Internal Storage\igo8\content"
texture="\Internal Storage\igo8\content"
save="\Internal Storage\igo8\save"
custom="\Internal Storage\igo8\custom"
[interface]
maxzoom2d=6000000
show_exit=1
[gps]
set_messages=0
[interface]
vga=1
[rawdisplay]
screen_x=480
screen_y=640
highres=1
[sound]
mute_os_key=1

But my opinion problem not in sys.txt I do something wrong but what ?

Belzebuth.
19th November 2008, 11:39 PM
I repeat when I donwload igo was 2 folder inside one autorun inside second almost program without (exe) I started autorun and go process instalation after exe appear in program files directory. afer I create folder on the Internal Storage (Igo8) I've copy this exe inside this folder and all files from second folder, and change sys.txt like this :
[folders]
app="Internal Storage\igo8"
sdcardapp="Internal Storage\igo8"
sdcardpath="\Interal Storage"
data="\Internal Storage\igo8"
content="\Internal Storage\igo8\content"
texture="\Internal Storage\igo8\content"
save="\Internal Storage\igo8\save"
custom="\Internal Storage\igo8\custom"
[interface]
maxzoom2d=6000000
show_exit=1
[gps]
set_messages=0
[interface]
vga=1
[rawdisplay]
screen_x=480
screen_y=640
highres=1
[sound]
mute_os_key=1

But my opinion problem not in sys.txt I do something wrong but what ?
Wich language is your ROM? WWE or another?

If it's WWE, put this in your sys.txt:

[device]
sdcard_dsk_num=7

It worked for me...:rolleyes:

All credits to matroxer...;)

If not, read this whole thread: http://forum.xda-developers.com/showthread.php?t=403325

4D3
20th November 2008, 12:08 AM
I dont know where you are all getting your software, but the versions you are all talking about are really poor.

I have the following:

Nav N Go iGo v8.0.0.54000 & Nav N Go iGo v8.3.1.57021 - WORKING 100%

and the sys.txt for both is:

---------------------------
[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
3d_max_tiltlevel=9000
---------------------------


in both of my installs there are 2 files:

2577
iGO8


and that is it, i have had no messing around with sys.txt, I do not have to go looking for program exe's with total commander or sending shortcuts anywhere.

With the versions i have, and this install procedure works for both releases of iGO8:

1, copy 2577 & iGO8 to internal storage
2, unplug phone from usb

and that is it, and you even have the added bonus of having startmenu shortcuts installed!! WOOP

also as another great feature of the way my installs work is when you flash a new rom, the first thing to popup after typing in your pin is the install screen for iGo8 and all settings/favourite locations/etc are all kept in tact!

I have compiled both of these myself from bits and pieces from various different sites and they are not available for download on any site in the configuration i have made.

just as a side note, it was me who got iGo v8.3.1.57021 to work at all on the HTC Diamond!!and variants have propogaed through the internet which dont work as well.


Obviously i cannot/will not post links in this forum as i will get banned. and i have not posted links on any other sites to this software.



BUT IF YOUR INTERESTED IN WHAT IM SAYING PM ME!! ;)

semplice
20th November 2008, 04:07 AM
try another version of igo...

iGo v8.3.1.57021 - on my diamond dont working...
but the version 8.3.1.54384 - work very well with this configuration:

file SYS.TXT:
[folders]
app="Memorizzazione interna/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

[map]
2dheadup=1

JAYmasta
20th November 2008, 05:19 PM
I confirm that this works, added to the sys.txt
[device]
sdcard_dsk_num=7

thanks mr. Belzebuth

Belzebuth.
20th November 2008, 09:53 PM
I confirm that this works, added to the sys.txt
[device]
sdcard_dsk_num=7

thanks mr. Belzebuth

Nice to see it works for you...;)

Like I said: "All credits to matroxer...;)"

dirtytwo
20th November 2008, 10:35 PM
[QUOTE=semplice;2933283]try another version of igo...

iGo v8.3.1.57021 - on my diamond dont working...


Working 100% on my Diamond

seeya

Belzebuth.
20th November 2008, 11:01 PM
For more solutions with iGO8 troobleshooting: http://forum.xda-developers.com/showthread.php?t=403325

It's better to post all problems and solutions in 1 thread, easier to find solutions for other members...;)

Optika
20th November 2008, 11:31 PM
All that has to be done is
In SYS.TXT
Change the SD card to the name of your internal memory.
ON Diamond if your SYS.TXT sais SD card IGO will not work!

maxxxy
21st November 2008, 08:55 AM
hello guys
I igo8 works well on diamond
but I have a problem
the diamond after a few seconds to go on hold and the screen goes black.
in theory it is right but with no navigation program.
How can I do to stay on?


ciao ragazzi
a me igo8 funziona benissimo sul diamond
ma ho un problema
il diamond dopo un po di secondi va in attesa e lo schermo diventa nero.
in teoria è giusto ma con un programma di navigazione no.
come faccio a farlo rimanere acceso?


grazieeee

tcf1962
21st November 2008, 12:50 PM
Works fine on my Diamond (Vodafone) , but have problems with the TMC, it picks up signal (GNS GPS & TMC Receiver) from RDS radio stations, but does hold on the frequency and does not alert of any traffic jams.

Also I have not been able to find a U.K map with the full 7 digit postal code entry (only seems to have 4 or 5 digit entry I.E SE26 then it brings up code that relate to SE26 you sill have to entry the road name, this seem to be stepping back to prior version 8.0x

maxxxy
21st November 2008, 01:39 PM
Works fine on my Diamond (Vodafone) , but have problems with the TMC, it picks up signal (GNS GPS & TMC Receiver) from RDS radio stations, but does hold on the frequency and does not alert of any traffic jams.

Also I have not been able to find a U.K map with the full 7 digit postal code entry (only seems to have 4 or 5 digit entry I.E SE26 then it brings up code that relate to SE26 you sill have to entry the road name, this seem to be stepping back to prior version 8.0x

but diamond have TMC ?????:confused::confused::confused:

GPSSlovakia
21st November 2008, 02:38 PM
AFAIK there is no TMC in Diamond.

nickytheshaft
21st November 2008, 04:06 PM
Do you have lag with igo ?

tcf1962
22nd November 2008, 12:34 PM
but diamond have TMC ?????:confused::confused::confused:

Diamond does not have a TMC receiver, but I have a stand alone GNS receiver with has TMC & GPS built in to one unt

darkman088
7th February 2009, 10:03 AM
Hello,

I have a diamond and iGO 8 is running fine. Although, I would like to install a newer version, because I would like to make use of the VGA display. Although, no matter which version I try (and I tried 4-5 versions or maybe even more), it isn't working.
Every time, the applications is starting and after I see APP INIT, iGO is quitting. I already fixed all the paths in sys.txt.

PLEASE HELP !!!

Thank you!

darkman088
7th February 2009, 12:07 PM
Hi again,

I found the solution: simply add the following in sys.txt

[device]
sdcard_dsk_num=7

Although it doesn't like the maps I feeded it with (from iGO 8.0), but it looks like it is finally going to work!!
Can you please advise which version is better? I've read somewhere in this forum, that 8.3 is lacking some features...

Citramon
7th February 2009, 04:27 PM
http://rapidshare.com/files/147503206/IGO8.part01.rar
http://rapidshare.com/files/147503363/IGO8.part02.rar
http://rapidshare.com/files/147503582/IGO8.part03.rar
http://rapidshare.com/files/147504229/IGO8.part04.rar
http://rapidshare.com/files/147504300/IGO8.part05.rar
http://rapidshare.com/files/147504754/IGO8.part06.rar
http://rapidshare.com/files/147504799/IGO8.part07.rar
http://rapidshare.com/files/147504854/IGO8.part08.rar
http://rapidshare.com/files/147507915/IGO8.part09.rar
1,69GB

no password.
whole europe + some other maps

Interface: English and Russian

Fully optimized for HTC Diamon!!!! just copy folder 2577 and Igo on storage and run Autorun installation from 2577. Based on version 8.0.0.44366