Kaiser, no service - Help - ?

[stevh0]

Last night i was playing with my gps ( Navigon - Google Maps - Google Nav) I switch the phone off at the comm Manager and left it off like that the whole night.

This morning when i switched it on, the phone refused to receive any signal.

Ive tried the following

Soft Reset
Hard Reset
Different Sims
Switching flight mode on and off aswell as the phone tabs
Ive changed the band from auto to gsm and back and still nothing

Gps, Wifi and everything else still works perfectly.


Before i return it and wait like 50 days for them to fix it, what can i try?

[mskip]

Last night i was playing with my gps ( Navigon - Google Maps - Google Nav) I switch the phone off at the comm Manager and left it off like that the whole night.

This morning when i switched it on, the phone refused to receive any signal.

Ive tried the following

Soft Reset
Hard Reset
Different Sims
Switching flight mode on and off aswell as the phone tabs
Ive changed the band from auto to gsm and back and still nothing

Gps, Wifi and everything else still works perfectly.


Before i return it and wait like 50 days for them to fix it, what can i try?
More information please. Rom, Radio, SPL?

Also have you tried calling your provider to ask if theres any problems at their end?

Mark.

[stevh0]

I have no idea what rom..

lemme check..i have not changed a thing since i took delivery of the phone about 9 11 month ago.

my sim works perfectly in another phone.

rom 1.56.405.5
rom date 08.28.07
radio version 1.27.12.32

[Flying Kiwi]

Does your sim work perfectly in another phone *in the same location* though? It was suggested you contact your network provider to see if they have any known issues or there are any reasons why your phone shouldn't be working. It may help if you have the IMEI number ready if you are in the UK, in case there is some reason why it has been blacklisted. If your TyTN II wont work with another sim in it (ideally from another network provider) and your usual network provider is unaware of any reason why this should be happening, then as a stock standard TyTN II, I think you'll have a good chance of having it looked at for free under warranty by HTC. Here in the UK I had my ROM reflashed from their WM 6.1 abomination back to the original WM 6.0 version by HTCs repair centre within one day so unless you choose a turtleback express postage option to send it in, there's no way it should take 50 days.

[stevh0]

It started working all on its own again? how weird is that?

[yiwangwuqian020]

my tytnII had became the same after flight mode had turned on.
when fight mode off, it displayed "no service".

[Hakim Rahman]

my tytnII had became the same after flight mode had turned on.
when fight mode off, it displayed "no service".

you just use GSM-schen-HTC.Kaiser.CommManager.3G :)

[yiwangwuqian020]

hi, first thanks a lot,
my tytnII had this commManager software. I just used this commManager to turn on or off this flight mode .

[azaznin]

how about no sim detected?

[Gastrocsaba]

This problem is on my phone ,but this prog is not running perfectly. Error report at cca 95% full "sufficient system permissions"

Sorry for little English!

Please help me
radio:1.65.17.56
rom: through

[yiwangwuqian020]

This problem is on my phone ,but this prog is not running perfectly. Error report at cca 95% full "sufficient system permissions"

Sorry for little English!

Please help me
radio:1.65.17.56
rom: through
after I reflash this tytn`s rom, it remain no service.
I think it had wrong with its gsm hardware.

[aekapolm]

Sorry for my english.
I found this problem too.( no service)

My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block

a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.


2. Flash Rom again.
3. Now Signal come.

[pbakula]

And you turned your Kaiser into a BRICK...
... If your SPL supports "task 2a".