PDA

View Full Version : Loose Connector on Phone - Need help


Imyman
19th November 2008, 07:57 PM
Hi,

The connector on my touch (mini usb port) has somehow gotten loose or something. Everytime I connect the phone to charge or sync......the slightest touch/movement throws it off. I know there may not be much I can do right now except maybe replace the motherboard or something. Just needed some info if tht is indeed the way to go....or is there some other solution or a fix that any of the geniuses here can help me out with :o

Thanks in advance

jlito
20th November 2008, 12:40 PM
Hi... apparently this does happen quite often with this connectors but it doesn't necessarely mean that that connector is overall loose.
Try to check if this might be your case.... On some devices I've noticed that the metal strips within the connector (in the phone, top part of the connector usually) looses away from its original position, if its not broken you may be able to unbend it and restore it to the original position with a thin pin or something of that sort. This will make things work again.
To prevent this from keep happening just be carefull when you plug/unplug your cables into it. Be gentle when inserting the cable and make sure to put the pressure to insert it only when its in the exact position.

hope this helps... good luck

TheNorm
20th November 2008, 01:57 PM
...The connector on my touch (mini usb port) has somehow gotten loose or something. ...

I thought I had this problem, but it turned out to be a faulty USB cable - I think the wires were loose where they joined the connector. Since changing the cable I've had no problems.