Little question about MTTY and my Hermes

[Nixeus]

Hello :)

When i use the MTTY tools, i obtain this :

Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xBE(190) is BAD block !!!
Block 0xDC(220) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1D700
Partition[3], type=0x4, start=0x20900, total=0x1E700

CE Total Length(with sector info) = 0x4224800
CE CheckSum Length(without sector info) = 0x4120000


Cmd>task 2a
Check block : 190 - Bad

Check block : 220 - Bad


My question is about the partition[0], is it the IPL partition ?

In fact, i would like to kwow which is the adresse (begin and end) onf the IPL on the Hermes :)

Great thanks !!

[ultramag69]

I have the same readout as you from MTTY. I believe its a branding done by Telstra. I haven't been able to fix these "bad blocks" though I believe Wam7 said they did when they updated to Hard SPL. Didn't work for my Telstra Jasjam though...
It may be that you won't be able to fix these.

Cheers...:D

[Nixeus]

Hi ultrama69,


This readout is the your's lol, i have copy the your's on an other topic ! I just want to know if the [partition0] is the IPL.

Regards,

Nixeus

[ultramag69]

Sorry, can't answer that.:confused:
Maybe someone else in the know will answer your question.

Cheers...:D

[character]

can you please five the link for mtty for hermes