My Diamond Stuck In Rgb Display

[pitt1983]

My diamond stuck in RGB mode after a tryed radio update.. and dont't know what to do..

[TomInMB]

You could try doing a hard reset to see if that works. If not, connect a USB cable to your computer and reflash your ROM from bootloader.

[pitt1983]

You could try doing a hard reset to see if that works. If not, connect a USB cable to your computer and reflash your ROM from bootloader.

connected and tried a radio or rom update but the pc dont recognize diamond..

[pitt1983]

i've also done an hard reset, but at boot same problem.. ???

yessss retried the rom upgrade with another pc after hard reset.. and it worked! fine i'm happy!

THANKS!

[TomInMB]

Then just connect the USB cable to the diamond and PC. You should then get 'USB' in grey area of bootloader. Run the RUU on your PC to flash back a ROM. I am guessing flashing the radio buggered the ROM somehow.

EDIT: I am guessing your have a GSM diamond, and not a CDMA (Sprint) diamond, right? Good to hear you got it working!

[point2i]

i have tried to flash my radio a few days ago with no succes , it stucked on 0%
i waitad for a while and then got a message on my pc instruct me what to do :
disconect the sync cable from computer .
take out the battery from the td for few seconnds .
return the batt and soft reset .

i hope that would help you /