[PRJ+ROM][UPDATAD:2009.01.05]WWE.KitchenTree. "LEGO" mode. Ready for cook.

[mondilv]

As is.
Just press the "!COOK.CMD" file. (or make your changes before)

Old opinion:
>>8M of PP - after long time of testing looks as the optimal size for performance/RAM.<<
New opinion:):
12M PP looks bit more responsible to interface.

New packages & drivers.
Tweaked several packages - for less memory use.
Tried to put all possible configs in one OEM/xxxconfig folder.

UC ready, - look to _ADDS/Internal Storage forder for example.
Mark all content of "Install" forder as "read only". Or you loose it after install or hard reset.

The best way - look inside "provision.zip" and make your own config file. Put it in "Install" folder and line as
"XML: \Storage\Install\provider.xml" to "sdconfig.txt".
Password for provision.zip you can find at the help page of Connection setup.


You need unsigned HardSPL!

Don't forget about hard reset after first install & make content of "Internal Storage/Install" READ ONLY!


RESOURCES
"LEGO": http://rapidshare.com/users/JW7QII
Snapshots: http://rapidshare.com/users/7L0TM7
Cabs: http://rapidshare.com/users/E8A83X

-=NEWS=----------------------------------
[2009.01.05]
MSXIP21109 & SYS21109(XIP inside) added to "Lego" repository.

-=NEWS=----------------------------------

------Check the time of upload, new version could be there: not the all changes going to the "NEWS" category -------

P.S. Remark for all:
I open this thread for people, who want to make own rom, but don't want spent the time for brutal operations.
Not all components is "mondi's original", - big thanks for
bepe,
swtos,
Niki,
Vic5870,
AVLev,
Prewien,
lexxirae,
and others for ideas and work.
It's only "timepoints" of my kitchen. With bugs, mistakes etc.
Will be glad to see opinions, founded bugs, new ideas.
EVERYBODY CAN USE IT AT ALL, if they use it for private ROM or follow the same "open" politics.

[Blazeitup123]

i get errors when extracting. winzip says its corrupt and win rar says invalid or corrupt authenticity information. win rar will complete the extration, but i'm not about to flash anything when there are errors. maybe upload again?

[mondilv]

MD5:

18ebc1fbaaca73df8ff6124ad4296db3 *1.97.20755_Diamond.rar

19befa01daf491d6c838fa8d38d8096a *KITCHEN_20755_WWE.RAR

2bdceea4e5642f9f4066ed858041c086 *1.97.20755.nbh

Check it.

I'm downloading back now. Will see.
Used winrar 3.80

..............

1.97.20755_Diamond.rar has checked: passed
1.97.20755.nbh has checked: passed
KITCHEN_20755_WWE.RAR has checked: passed

[iXiR]

Thanks man,

going to try it now :)
If I can do anything, just let me know...

[okokur]

hi,

at first, i have the same problem with extracting (3.8) and authentification,
but it extracts ... i dont know, if some files wouldnt extract?

the second is
"AAAAAAAAAAAAAAAAAAAAAAARGH" !

where you are the last weeks during i flashing my rom with kaiserkitchen
(it's very good, but for beginners its very strong ... with a liitle time spend
and reading here and reading there its gone) ? :)

i cooked my own rom ... i think its 3 houers before ...
its always the same - iam finishing with this one - than an other cooker/flasher puts a new thread and all the works begin at zero.

but that is it what we love i think.

i will use my rom for 3 or 4 houers than i will test/use your kitchen :)

thank you for your work.

okokur

p.s.
my english is not so good and the time its gone to morning,
my comment to your thread means positiv/happy. it dont means any angries

[mondilv]

Hello!
I repeat: it's not "my" kitchen.
"My" is only changes in OEM/SYS/ROM folders.
I like this kind of kitchen for useful "stepping".
Forgot, where did I find it. Somewhere here:)
Bit later will be update to 20757 (HD ported).

[pietrucci]

This kitchen seems of no use to me.
It needs .nb, .wrn and other files which are'n present.
Maybe some explanating how to get them, I would like to try it.

[mondilv]

This kitchen seems of no use to me.
It needs .nb, .wrn and other files which are'n present.
Maybe some explanating how to get them, I would like to try it.

???
Just press !COOK.CMD.
May be damaged archive? Check the md5 sum to arh.

[pietrucci]

Ok, sorry it's working now...

Another question: a lot of files are from date 10th of July, for example the manila files. Does this mean these files really are so old???
The latest versions of manila are of a newer date are they?

[mondilv]

Ok, sorry it's working now...

Another question: a lot of files are from date 10th of July, for example the manila files. Does this mean these files really are so old???
The latest versions of manila are of a newer date are they?

Marked "stable" original Diamond manila.
If you want the alternative - look to the "_OUT" folder.

[mondilv]

Updated to Blackstone's XIP/SYS 20757.
Manila updated to last "official": 1.1.35097.1_1630.38
Style to gray.

[dafeke]

I just got my Diamond 2 weeks ago. I cook my first ROM using your kitchen tree but I have some questions:

1. Why the setting up screen is all black ? I thought there were some sort of Windows Mobile 6 background

2. I tried to set up bluetooth but it shows me a message box with something like "No bluetooth hardware"

I follow the instructions by just clicking !Cook.cmd. I didn't change anything in your packages. Did I do something wrong ?

Please advice. By the way, thanks for this kitchen tree.

[mondilv]

1. Why the setting up screen is all black ? I thought there were some sort of Windows Mobile 6 background
It's just my choice: less using rom/ram memory. And not important at all. You can use yours pictures. It is the kitchen, isn't it?:)

2. I tried to set up bluetooth but it shows me a message box with something like "No bluetooth hardware"
I follow the instructions by just clicking !Cook.cmd. I didn't change anything in your packages. Did I do something wrong ?
I'll see. I use BT very seldom. Didn't check it, just put the packages.

[pietrucci]

It's just my choice: less using rom/ram memory. And not important at all. You can use yours pictures. It is the kitchen, isn't it?:)


I'll see. I use BT very seldom. Didn't check it, just put the packages.I coocked my ROM with version 20755: everything's fine here with bluetooth (and all other stuff). I use bluetooth for my carkit, works fine.

I benchmarked this ROM with my usual benchmarks: it's pretty fast compared to others! I left out Opera and Google Maps, but I don't think that makes a big difference in benchmark results.
I will try your Blackstone upgrade this evening, I'm curious if that's faster than the 20755... (in fact I don;t think so).

There is one strange thing in this one: I can't change pagepool. Using pagepoolchanger.exe it says it can't find the right address...

Keep you informed...

[omaga]

Thank you mondilv for the this kitchens! Great job

[mondilv]

I coocked my ROM with version 20755: everything's fine here with bluetooth (and all other stuff). I use bluetooth for my carkit, works fine.

I benchmarked this ROM with my usual benchmarks: it's pretty fast compared to others! I left out Opera and Google Maps, but I don't think that makes a big difference in benchmark results.
I will try your Blackstone upgrade this evening, I'm curious if that's faster than the 20755... (in fact I don;t think so).

Agree. I did benchmarks too. (?)
BT fix - in the first post (from 20755 SYS). Works now.

There is one strange thing in this one: I can't change pagepool. Using pagepoolchanger.exe it says it can't find the right address....

pagepoolchanger.exe don't works to Diamond (use search - don't remember, where is the info). Use hex editor.
...and NB container is reduced by uldr, - only one needed address.

Keep you informed...
Thanks for cooperation!

[pietrucci]

Agree. I did benchmarks too. (?)I suppose you use the ? because you don't know why I make this remark? Well, if you like take a look at my thread: http://forum.xda-developers.com/showthread.php?t=406640, you can compare this ROM with many others, all tested on the same device, under the same circumstances, more or less.. I will add this ROM's benchmark results later this evening.

pagepoolchanger.exe don't works to Diamond (use search - don't remember, where is the info). Use hex editor.
...and NB container is reduced by uldr, - only one needed address.PagePoolChanger DOES work on most 'normal' Diamond ROMs, I've used it many times before. But I guess it conflicts with the uldr thing... no problem.

[suiller]

here friend... like mentioned in a PM sent you this morning... I'm porting some pieces of your base sys/xip for including in my rom (dia duit), of course I'll mention that the base rom comes from your hard work :)

instead of upgrading the whole sys I prefer to choose faster/smaller dlls between different sys :D

anyway also my rom is open, because I strongly believe that this is the only way to proceed to a faster development... by sharing infos each other

but I'll prefer to share the whole kitchen on my 1st stable release, now we are at v08, because till now my rom has some bugs

thx mate!

bye,
davide

[suiller]

I suppose you use the ? because you don't know why I make this remark? Well, if you like take a look at my thread: http://forum.xda-developers.com/showthread.php?t=406640, you can compare this ROM with many others, all tested on the same device, under the same circumstances, more or less.. I will add this ROM's benchmark results later this evening.

PagePoolChanger DOES work on most 'normal' Diamond ROMs, I've used it many times before. But I guess it conflicts with the uldr thing... no problem.

here how to change PP on diamonds:

open final .nbh file with a hex editor (I use pspad)
search the following hex value: 389FE550089FE5
as you find it change next two numbers (in an original rom, these two values are 00 25)
search again for the same hex value, again you need to modify the adjacent two values (in case of an original rom, these two values are 03 25)


values:

for pp 0 Mb: 00 25
for pp 8 Mb: 02 25
for pp 12 Mb: 0C 26
for pp 16 Mb: 10 26


of course I wasn't able to find alone... I found thx to the great & nice Seatone :cool:

have fun :D

[mondilv]

I suppose you use the ? because you don't know why I make this remark?
I was bad surprised too. Quite big diff between close versions. About 5%, isn't it?
After trying several combination of xip/sys me like 20755 at last time.
Or xip757/sys755 - no bad too.

Well, if you like take a look at my thread: http://forum.xda-developers.com/showthread.php?t=406640, you can compare this ROM with many others, all tested on the same device, under the same circumstances, more or less..
I good know your thread:D

I will add this ROM's benchmark results later this evening.
Early, I think. Can't to call its rom stable. Just found more bugs, think not the last for today:) (lighting for missed call is absent; green element in manila)
I return to home now, so new version could be tonight.

PagePoolChanger DOES work on most 'normal' Diamond ROMs, I've used it many times before. But I guess it conflicts with the uldr thing... no problem.
May we use different versions?
"My" looks properly worked, but by devhelth.exe - PP didn't changed.

[mondilv]

here friend... like mentioned in a PM sent you this morning... I'm porting some pieces of your base sys/xip for including in my rom (dia duit), of course I'll mention that the base rom comes from your hard work :)


It's normal, IMHO.
Info must be free. It's the best way to make good product together.

[pietrucci]

Ok, I'm still using version 20755 for a few days now.
There are some bugs and stability problems:
- Loosing GPS fix. I'm using TomTom and my GPS fix is dropping all the time, can't get a steady fix.
- Loosing BT connection. I connected my carkit using bluetooth. Every now and then I loose connection with my carkit.
- Threaded SMS: this options doesn't work (I enabled but doesn't work),

These things DO work correctly in other ROMs.

Maybe some problems are solved in version 20757? Maybe I'll try that later this evening...

[suiller]

here instead... I've ported 757 to my rom (dia duit), but I had to replace most of drivers of 1.97 with the ones coming from 1.96... in my opinion 1.96 still rocks :D

anyway... till now all seems working well, ram managements is definitively better than 755, 8PP is the best balance even if I'm experimenting also with 4PP, so... still investigating but future is really close ;)

[seatone]

here how to change PP on diamonds:

open final .nbh file with a hex editor (I use pspad)
search the following hex value: 389FE550089FE5
as you find it change next two numbers (in an original rom, these two values are 00 25)
search again for the same hex value, again you need to modify the adjacent two values (in case of an original rom, these two values are 03 25)


values:

for pp 0 Mb: 00 25
for pp 8 Mb: 02 25
for pp 12 Mb: 0C 26
for pp 16 Mb: 10 26


of course I wasn't able to find alone... I found thx to the great & nice Seatone :cool:

have fun

Hey, what do u think! I've spent more than 15 minutes finding out all this stuff and u reavealed it in a second????

Com'on I was just kidding :D
Thank you for the credit, u are as fair as I thought. :)
Happy cooking my friend!

[pietrucci]

hi suiller,

camera is build 6.00, seems an old build to me... (at least version 6.04 is out)

[mondilv]

here instead... I've ported 757 to my rom (dia duit), but I had to replace most of drivers of 1.97 with the ones coming from 1.96... in my opinion 1.96 still rocks :D
Interesting, will try. I didn't check v. 1.96 serious: 1.97 issued very fast:)

anyway... till now all seems working well, ram managements is definitively better than 755, 8PP is the best balance even if I'm experimenting also with 4PP, so... still investigating but future is really close ;)
Absolutely agree. I test 6 & 10M too.
At the last moment, 8M PP - the best choice.

[mondilv]

hi suiller,

camera is build 6.00, seems an old build to me... (at least version 6.04 is out)

At "official" Diamont roms I didn't see it.
At Blackstone's rom - 6.06
But I'm not sure, that is the best way.
Up to you:D

[suiller]

hi suiller,

camera is build 6.00, seems an old build to me... (at least version 6.04 is out)

6.00 in which rom? I checked packages ver between 197 & 196 & didn't notice any diff in camera app... :confused:

[mondilv]

Ok, I'm still using version 20755 for a few days now.
There are some bugs and stability problems:
- Loosing GPS fix. I'm using TomTom and my GPS fix is dropping all the time, can't get a steady fix.
- Loosing BT connection. I connected my carkit using bluetooth. Every now and then I loose connection with my carkit.
- Threaded SMS: this options doesn't work (I enabled but doesn't work),
Maybe some problems are solved in version 20757? Maybe I'll try that later this evening...

Thanks for feed!
Going to look.

[suiller]

Hey, what do u think! I've spent more than 15 minutes finding out all this stuff and u reavealed it in a second????

Com'on I was just kidding :D
Thank you for the credit, u are as fair as I thought. :)
Happy cooking my friend!

:rolleyes: I think that thread like this one could help plp to unify their knowledges... anyway thx againg friend... also because I was near to an horrible headache to find the right way to setup the damn PP :cool:

[suiller]

Thanks for feed!
Going to look.

I'll test GPS with 757 in the next 2 days & I'll give some news here too ;)

[pietrucci]

6.00 in which rom? I checked packages ver between 197 & 196 & didn't notice any diff in camera app... :confused:For example THIS, it's version 6.6 from Blackstone...
I got it from Noonski's kitchen (hope you don't mind Noonski)

[suiller]

For example THIS, it's version 6.6 from Blackstone...
I got it from Noonski's kitchen (hope you don't mind Noonski)

I ported many apps from HD... but some, as for ex concurrmanager... have older dlls, in fact works better "old" concurrmgr from 1.93 than the "newer" from HD

[mondilv]

I'll test GPS with 757 in the next 2 days & I'll give some news here too ;)

At first, I use 755 now.
So...

After reflash many versions of radio I went back to 1.00.25.05
Result by gmaps (first start): after 8sec - 7 sats, after 20sec - 11.
Tried use it moving car. All OK.
iGo8 works without problems too.
Which kind of radio do you use?

About BT difficult to check situation. At least my handsfree (HTC gadget) works normally. But I use it very seldom - hate this "third ear".:)

About SMS threading:
In config rgu (OEM/xxxconfig) is:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM]
"SMSInboxThreadingDisabled"=dword:00000001

[mondilv]

6.00 in which rom? I checked packages ver between 197 & 196 & didn't notice any diff in camera app... :confused:

For package version - look to package/*.rgu
key [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\MASD]

[ark666]

Hi Mondilv, tried your kitchen and all is ok, nice job.
Have u tried porting new Blackstone build 20764 aku 1.4.3?

[mondilv]

Hi Mondilv, tried your kitchen and all is ok, nice job.
Have u tried porting new Blackstone build 20764 aku 1.4.3?

Good news, but bad time: haven't enough that f* time, now:(
Study.
May be kernel only.

I think we are waiting for new Diamond from HTC now:)

[ark666]

Good news, but bad time: haven't enough that f* time, now:(
Study.
May be kernel only.

I think we are waiting for new Diamond from HTC now:)

I tried but sys is hard to port, this blackstone builds are hard to port.

Cheers. :)

[mondilv]

I tried but sys is hard to port, this blackstone builds are hard to port.

Cheers. :)
Yes, sys....

[mondilv]

Have u tried porting new Blackstone build 20764 aku 1.4.3?
Where did you find it?

[suiller]

At first, I use 755 now.
So...

After reflash many versions of radio I went back to 1.00.25.05
Result by gmaps (first start): after 8sec - 7 sats, after 20sec - 11.
Tried use it moving car. All OK.
iGo8 works without problems too.
Which kind of radio do you use?

personally I test radios using the MS tool fieldtest.exe... it shows you the signal strength of your cell broadcast, so less noise means much power, in fact right now the most balanced radio is 1.00.25.08 (also 07 & bs14 perform well), during these days I'm testing 1.09.25.23

fieldtest is very useful because goes beyond "feelings"... so you can compare signal with different radios but in the same place/situation, for with 05 I have no signal in my lift... instead even if the phone isn't able to call with 08 in the same situation I have a bit of signal... and this is not due to my personal feeling :cool:

[suiller]

hmm... I'm still having BIG BIG doubts... in adopting 1.97 rom... there is something that didn't convince me, just finished this test: I put the same same pkgs & whatever in 2 EQUAL kitchens... 1st based on 1.97 & 2nd based on 1.96... results are in favor of 1.96

again... newer sys like 20757 "seems" fatter compared to original ones that come with stock rom... & I don't see real speed improvements, it seems just that with 20757 ram leakage is less... but repeat... it seems... after about 1 hour of usage... I can't see if there are real differences

again... if I benchmark both roms also with diff sys/xip I see very very close results... so... why we are frustrating our minds to import newer/fatter sys/xip/roms if results are almost the same??

[christonge]

hmm... I'm still having BIG BIG doubts... in adopting 1.97 rom... there is something that didn't convince me, just finished this test: I put the same same pkgs & whatever in 2 EQUAL kitchens... 1st based on 1.97 & 2nd based on 1.96... results are in favor of 1.96

again... newer sys like 20757 "seems" fatter compared to original ones that come with stock rom... & I don't see real speed improvements, it seems just that with 20757 ram leakage is less... but repeat... it seems... after about 1 hour of usage... I can't see if there are real differences

again... if I benchmark both roms also with diff sys/xip I see very very close results... so... why we are frustrating our minds to import newer/fatter sys/xip/roms if results are almost the same??

I completely agree... I have been using the 1.96 for a good few weeks now and I have to say I´m very happy with it. I cooked up the 1.97 when it came out but it didn´t seem to be as smooth.
The same goes with a lot of the new SYS and XIP I´ve tried.. The diffrence is very very very small... as always newer doesn´t always mean better! ;)

[pietrucci]

hmm... I'm still having BIG BIG doubts... in adopting 1.97 rom... there is something that didn't convince me, just finished this test: I put the same same pkgs & whatever in 2 EQUAL kitchens... 1st based on 1.97 & 2nd based on 1.96... results are in favor of 1.96

again... newer sys like 20757 "seems" fatter compared to original ones that come with stock rom... & I don't see real speed improvements, it seems just that with 20757 ram leakage is less... but repeat... it seems... after about 1 hour of usage... I can't see if there are real differences

again... if I benchmark both roms also with diff sys/xip I see very very close results... so... why we are frustrating our minds to import newer/fatter sys/xip/roms if results are almost the same??My previous signature was: Newer isn't always better...
If you look in my overview you'll see the superfast ROMs from Swtos and alphazero are 20755...

[suiller]

My previous signature was: Newer isn't always better...
If you look in my overview you'll see the superfast ROMs from Swtos and alphazero are 20755...

yep noticed :)

[pietrucci]

Benchmarked a 1.96 version cooked by mondilv and my own cooked version of 1.97. They're very fast.
See if they're stabile, will find out tomorrow...
See: http://forum.xda-developers.com/showpost.php?p=2385460&postcount=1

[Dynomite232]

here how to change PP on diamonds:
open final .nbh file with a hex editor (I use pspad)
search the following hex value: 389FE550089FE5
as you find it change next two numbers (in an original rom, these two values are 00 25)
search again for the same hex value, again you need to modify the adjacent two values (in case of an original rom, these two values are 03 25)


values:

for pp 0 Mb: 00 25
for pp 8 Mb: 02 25
for pp 12 Mb: 0C 26
for pp 16 Mb: 10 26

of course I wasn't able to find alone... I found thx to the great & nice Seatone :cool:

have fun :Dwow this was awsome thanx alot for this

[Dynomite232]

Hey, what do u think! I've spent more than 15 minutes finding out all this stuff and u reavealed it in a second????

Com'on I was just kidding :D
Thank you for the credit, u are as fair as I thought. :)
Happy cooking my friend!is ther another way of changing the ppool becuase i see a rom with out the
0c 26 12mp pool and it is stated that its12mp pool but while i read here on how to change the ppl his is realy at at 02 25 which is from original rom so i was wondering if it is able to change some other way

[pistonripper]

I've tried to add the original phone canvas package (the one with with phone lock slide) in the ADDS folder to the OEM folder, once I've cooked it and flashed the nbh, I'm getting the normal 1.93/1.96 Phone canvas, there is no slide....what am I doing wrong...all I am doing is adding the 3 folders in the PACKAGE_Diamond_PhoneCanvas_original.rar into the OEM folder, obviously first deleting the ones already in OEM.:confused:

[mondilv]

I've tried to add the original phone canvas package (the one with with phone lock slide) in the ADDS folder to the OEM folder, once I've cooked it and flashed the nbh, I'm getting the normal 1.93/1.96 Phone canvas, there is no slide....what am I doing wrong...all I am doing is adding the 3 folders in the PACKAGE_Diamond_PhoneCanvas_original.rar into the OEM folder, obviously first deleting the ones already in OEM.:confused:

I think it for lock phone. Not sure: don't use it. It just from Vodafon's rom.

[pietrucci]

Still have bluetooth and GPS stability problems, both in 1.96 and 1.97 kitchen.
Am I the only one???

[mondilv]

Still have bluetooth and GPS stability problems, both in 1.96 and 1.97 kitchen.
Am I the only one???

Found few positions in the xxxconfig/*rgu file, which could be problematic:

[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Au dioGateway]
"PowerSave"=dword:00000001

[HKEY_LOCAL_MACHINE\Drivers\Console]
"OutputTo"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:00000002
"IsEnabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001

Try to recook without it.

[mondilv]

Anybody know, how to start bluetooth icon without PhoneCanvas?
...and find the difference to use "DisablePowerManagement"=dword:0 anywhere?

[seatone]

I've tried to add the original phone canvas package (the one with with phone lock slide) in the ADDS folder to the OEM folder, once I've cooked it and flashed the nbh, I'm getting the normal 1.93/1.96 Phone canvas, there is no slide....what am I doing wrong...all I am doing is adding the 3 folders in the PACKAGE_Diamond_PhoneCanvas_original.rar into the OEM folder, obviously first deleting the ones already in OEM.:confused:


It's rather useless..It's just a sliding "cover" during phone calls to avoid unwanted screen tuches (if the light sensor or/and sleep isn't enabled).
I've used it in on of my roms for a while, but I took it out. You can press by mistake during the call the small softbutton and the cover dissapears, and you can then touch by mistake the TS, so, is like you wouldn't use this "magic cover".
Useless, don't waste ur time with it, but this is just my personal oppinion.

[seatone]

Found few positions in the xxxconfig/*rgu file, which could be problematic:

[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Au dioGateway]
"PowerSave"=dword:00000001

[HKEY_LOCAL_MACHINE\Drivers\Console]
"OutputTo"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:00000002
"IsEnabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001

Try to recook without it.


I think that this can cause GPS instability:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001

just cange 1 to 0 and it's solved :)

[pistonripper]

It's rather useless..It's just a sliding "cover" during phone calls to avoid unwanted screen tuches (if the light sensor or/and sleep isn't enabled).
I've used it in on of my roms for a while, but I took it out. You can press by mistake during the call the small softbutton and the cover dissapears, and you can then touch by mistake the TS, so, is like you wouldn't use this "magic cover".
Useless, don't waste ur time with it, but this is just my personal oppinion.

Thanks for the reply...I've tried cooking it by replacing the 3 folders PhoneCanvas, PhoneCanvas_409 and Video Telephony in OEM, but does not work, what am doing wrong ?, everything else I add or remove works, but not this...

Yeah, the grey cover looks rubbish....but for people who have not set thier screens to off on phone calls it does have its conveniences, especially if you change the bland looking cover bitmap file....

Hope you can help me cook this in:)

[mondilv]

... change the bland looking cover bitmap file....
Will look like new fashion stile:)
It's need to be in another thread: http://forum.xda-developers.com/showthread.php?t=436867

[mondilv]

XIP 764 looks faster, then 755.
At 755 sys, at least.
Going to try various combination...
Roms will be bit later. Tomorrow, I hope.

P.S. XIP764 - in the repository already.

[pietrucci]

XIP 764 looks faster, then 755.
At 755 sys, at least.
Going to try various combination...
Roms will be bit later. Tomorrow, I hope.

P.S. XIP764 - in the repository already.I tried and benchmarked the new Mary One ROM from yesterday, it's build 20764.
Testresults are not that super... So don't know if that build is faster than 755.
(will publish results later in my thread)

[pietrucci]

I think that this can cause GPS instability:
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001

just cange 1 to 0 and it's solved :)Will try these settings later... Thnx

[mondilv]

(will publish results later in my thread)

Could be you are right.
Explaining:
I change kernel at the same time, when try new trick.
And possible, the speed had grow by the trick (at file operations), not by kernel.
Going to try variants.

[pietrucci]

Found few positions in the xxxconfig/*rgu file, which could be problematic:

[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\PPTP1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Comm\L2TP1\Parms]
"DisablePowerManagement"=dword:0
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Au dioGateway]
"PowerSave"=dword:00000001

[HKEY_LOCAL_MACHINE\Drivers\Console]
"OutputTo"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
"ObexServiceMask"=dword:00000002
"IsEnabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
"EnableAGPS"=dword:00000001

Try to recook without it.Changed these settings (and others): still no luck.
As for bluetooth: my carkit doesn't recognize my device by itself. In other ROMs it does. About stability I don't know yet, had no long rides yet.
As for GPS: takes very long to get a fix, about 5 minutes. Usually this is about 30 seconds max. About loosing GPS fix I don't know yet, made no long rides yet.

I'll try to get BT and gps drivers from other ROMs, see if that helps...

[mondilv]

Changed these settings (and others): still no luck.
As for bluetooth: my carkit doesn't recognize my device by itself. In other ROMs it does. About stability I don't know yet, had no long rides yet.
As for GPS: takes very long to get a fix, about 5 minutes. Usually this is about 30 seconds max. About loosing GPS fix I don't know yet, made no long rides yet.

I'll try to get BT and gps drivers from other ROMs, see if that helps...

I haven't ideas more at last time...:(
Mat be devices can be a little different?

[mondilv]

One more:
Try to kill

<characteristic type="HKLM\Software\HTC\AdvancedNetwork" translation="filesystem">
<parm name="SupportHSUPA" datatype="integer" value="1"/>
</characteristic>

from finish.provxml


As for GPS: takes very long to get a fix, about 5 minutes.
Have you use quickgps before?

[pietrucci]

One more:
Try to kill

<characteristic type="HKLM\Software\HTC\AdvancedNetwork" translation="filesystem">
<parm name="SupportHSUPA" datatype="integer" value="1"/>
</characteristic>

from finish.provxml


Have you use quickgps before?yes I did, do it always. I used the GPS tool to rest all GPS settings. Then after a while I get GPS. But when I try a second time I have to wait 5 minutes again.
I tried some drivers from Noonski kitchen, but that frooze up my device right after flash.

Will try out some more...

[suiller]

hi friends... I posted my whole kitchen too (look at my signature)... just if you need to take some pieces, as I done with others :D

[suiller]

yes I did, do it always. I used the GPS tool to rest all GPS settings. Then after a while I get GPS. But when I try a second time I have to wait 5 minutes again.
I tried some drivers from Noonski kitchen, but that frooze up my device right after flash.

Will try out some more...

pollingtime... is the regkey you should look in :)

the pollingtime is the time of polls (in the time unit) made by gps driver, in few words de-creasing this value will take less time for a fix, of course it takes more battery too ;)

default value is 1000, you can lower up to 256 but you have to lower maxbuffer too or your gps will fix/unfix like a crazy horse :)

in/out buffers are irrelevant... even if there are 2 reg keys for those value...

SleepOnNoData must seek pollingtime too, so for ex if poll is 500 sleep must be 500 (or any near value) too

[mondilv]

hi friends... I posted my whole kitchen too (look at my signature)... just if you need to take some pieces, as I done with others :D

I stopped feel myself alone!:D

[mondilv]

SYS 20764 added
A little changes to OEM_1.96

[suiller]

some news... after a whole weekend of tests, 20931 is a pain... full of little annoying bugs... in few words still not usable for everyday usage

also 20757 sys has some troubles... trying instead to work with original (from stock rom) sys with an updated but stable xip (20758), let's see ;)

[mondilv]

XIP 20940 added

some news... after a whole weekend of tests, 20931 is a pain... full of little annoying bugs... in few words still not usable for everyday usage

also 20757 sys has some troubles... trying instead to work with original (from stock rom) sys with an updated but stable xip (20758), let's see ;)

Don't have opinion about stability, but by speed - nothing serious. Same as 20940.
About 20758 - really, I use it more, than 3 weeks. Haven't problems.
And didn't try it long time more... With new "tree" too.
Will see.

[adwinp]

I stopped feel myself alone!:D

You can always check my sig.

[mondilv]

Know this kitchen:)
But I did just filling of the kitchen, not the scripts.

[mondilv]

http://forum.xda-developers.com/showthread.php?t=456905

Looks really renewed.
Will try tomorrow.

[suiller]

http://forum.xda-developers.com/showthread.php?t=456905

Looks really renewed.
Will try tomorrow.

re-assembling right now ;)

soon I'll publish in a new kitchen...

[Noonski]

Here's the RGU's and config files for UC Autorun to work as Sleuth had planned.

(Hopefully)

[mondilv]

Here's the RGU's and config files for UC Autorun to work as Sleuth had planned.
(Hopefully)

Did I miss anything?
What are you talking about?

[suiller]

me too don't understand... here rom 2.00 works with UC too...

[Noonski]

The config.txt file you use in your OEM are set to Storage. to run UC Autorun.

The RGU's in both OEM drivers and OEMLANG have the Storage Card name still in them.

SDAutorun Checks those registry settings (only the to determine the name of the Storage card to run and find the sdconfig.txt
(HKEY_LOCAL_MACHINE\System\StorageManager\Profiles \SDMemory)

This was done to give UC Autorun Easy support for MultilAnguages.

That was before a device with a Flashdisc came out.

So Sleuth never took into account the value that would pop up in the Diamond,
([HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ moviNAND])

The files attached have al the correct values for normal UC SDAutorun support. (just 4 or 6 changed regs)


So

LOCK:Enabled
XML: \WINDOWS\Menu_Operation.xml
XML: \Windows\RemoveArrtibMMS_0409.xml
EXEC:\Windows\AutoShortcut.exe
EXEC:\Windows\AutoAttribute.exe \Windows\MASD_RemoveReadOnly.txt
XML: \Windows\finish.provxml
CFG: \Storage\sdconfig.txt
LOCK:Disabled
RST: Reset
LOCK:Enabled
XML: \WINDOWS\Menu_Operation.xml
XML: \Windows\RemoveArrtibMMS_0409.xml
EXEC:\Windows\AutoShortcut.exe
EXEC:\Windows\AutoAttribute.exe \Windows\MASD_RemoveReadOnly.txt
XML: \Windows\finish.provxml
LOCK:Disabled
EXEC:\Windows\SDAutorun.exe
But maybe i have overlooked the actual package your using for UC?

Never used any other method over several Devices.

So if your method is working you can ignore my details.

[mondilv]

XIP20759 added.
No bad works to SYS20755

[suiller]

XIP20759 added.
No bad works to SYS20755

I'm using your uploaded 20940 & all seem working, with 20759 I wasn't able to kill the damn AS, while it worked with all previous versions, now it works again with 20940, even if elias_asynckiller doesn't work

[ryousuke]

Benchmarked a 1.96 version cooked by mondilv and my own cooked version of 1.97. They're very fast.
See if they're stabile, will find out tomorrow...
See: http://forum.xda-developers.com/showpost.php?p=2385460&postcount=1

hi pietrucci,

do you have a link for these cooked roms?...

i'm assuming mondilv's rom is 20755_Grey_Full.rar

http://rapidshare.com/files/170322547/20755_Grey_Full.rar
Size: 62280 KB Add: 05.12.2008 00:25:36
??

can you post / upload your cooked rom...

Cheers

[suiller]

hi friends... just publishing the "open" kitchen of new rom 2.00, take all you need ;)

ps: look in my signature for the link

[Noonski]

yes I did, do it always. I used the GPS tool to rest all GPS settings. Then after a while I get GPS. But when I try a second time I have to wait 5 minutes again.
I tried some drivers from Noonski kitchen, but that frooze up my device right after flash.

Will try out some more...

Which files did you use?

(don't remember when i switched to the 1.97 GPS drivers)

But i did have a version that had HD drivers in there.

hi friends... just publishing the "open" kitchen of new rom 2.00, take all you need ;)

ps: look in my signature for the link

Cool Beans, not yet in the mood for upgrading yet. But still interested.

As for Active sync, i gave up after one try (Shame on me) editing the mxip_initdb.vol file to remove unneeded AS and CePui references. But i screwed up.
Need to take a look at the old mxip_initdb.vol file that had cepui removed again.

[mondilv]

Tried 2.00 drivers too.
IMHO: toooo raw. Slow & buggy, as a rule.
Only video drivers looks interesting. Fast.
But few packages from the 2.00.* rom could be used. Manila, for example.

[Noonski]

Tried 2.00 drivers too.
IMHO: toooo raw. Slow & buggy, as a rule.
Only video drivers looks interesting. Fast.
But few packages from the 2.00.* rom could be used. Manila, for example.

Ghehehe you now the saying:

If HTC had such great updates there'd be no need for XDA.

They didn't even bother to update ArcsofMMS.

[ryousuke]

pietrucci can you please upload your cooked 1.97 rom?

also can the theme in manila be changed back to default green?

[mondilv]

also can the theme in manila be changed back to default green?

It's big work:) And not only manila is matter.
All untouched "sources" you can find in WWE_OEM_2.00.421.1.RAR
Try it bit later in the "LEGO" folder. (see the first post)
And then - check by file date.

[ryousuke]

Thanks champ already using 2.00 as my own source... but having issues working out the registry and default settings...

the 1.96 you had is perfect for me to start off as a baserom... i'll give the 2.00 kitchentree a shot ;)
its nice a small which is what i like to see hehe...

[mondilv]

I'll give the 2.00 kitchentree a shot ;)

Be careful to OEMDrivers from 2.00. Nothing serious, but ... lot of changes:)

[ryousuke]

looks like kitchentree grey 1.96 was locked :(

back to my 2.00 base then...

how do you edit the communcations options?

at the moment i have airplane mode / phone / bluetooth / wifi / microsoft direct push / dataconnection

with the last 2 greyed out...

i want to replace direct push with 3g/gsm mode in order to conserve battery / gprs speed when needed...
whats the simplest way of doing this?

[Seiya]

How to extract any RAR without any message error? (I'm using Winrar 3.80)

! C:\Users\Desktop\12PP_OS.NB.rar: Invalid or corrupt authenticity information

[suiller]

Tried 2.00 drivers too.
IMHO: toooo raw. Slow & buggy, as a rule.
Only video drivers looks interesting. Fast.
But few packages from the 2.00.* rom could be used. Manila, for example.

I'm not with you... I think that in this rom many things are changed... in better of course

I'm testing this rom with a 0PP & it flies ... ram leakage still present but I'm searching a balanced solution like for ex a fixed cache & moving replstorecache into a small ramdisk to contain leakage

[mondilv]

Check the 1st post: "NEWS" section.

[ryousuke]

great!!

thanks mate...
there's satisfaction in making 'your' own rom the way you want things to behave :)
lego's awesome :D

[suiller]

Check the 1st post: "NEWS" section.

nice bro... you're working hard 4 the "community" :)

anyway I'll suggest to give a try at 20940, memory management seems better (of course still testing)

[ryousuke]

where's the start button icon stored? for the life of me i cant find it under OEM/SYS dirs... is it in shell.dll file?

shit also noticed that MSN messenger wont work aswell... for the rom i cooked / and the one released grey WWE...
its like its not even trying to connect via GPRS... get the error message 'theres a connectivity problem.make sure you're in an area with good reception and try again'...

thing is youtube works great... can finally stream at high quality without lag... and weather opera works fine... so what can be wrong :(

so close to making my 'perfect' rom...

[mondilv]

where's the start button icon stored? for the life of me i cant find it under OEM/SYS dirs... is it in shell.dll file?

Are you talking about "PIN-pad"? If so - PhoneCanvas/phcanOverbmp.dll

...MS messenger/Live is deleted. Compare not-touched *.provxml in OperatorPKG & from kitchen. Also - "rgu" in xxxconfig: deleted from "Today".
Or use the cab. (You can find it at the xda)

[ryousuke]

yes i know messenger is deleted but even when installed by cab? it still doenst function

[pietrucci]

hi pietrucci,

do you have a link for these cooked roms?...

i'm assuming mondilv's rom is 20755_Grey_Full.rar

http://rapidshare.com/files/170322547/20755_Grey_Full.rar
Size: 62280 KB Add: 05.12.2008 00:25:36
??

can you post / upload your cooked rom...

Cheersno, I won't post it (yet), because I have stability problems on my GPS and bluetooth. Will try the newer builds, see if it's getting any more stabile. Then I could publish it if someone wants it.

[pietrucci]

Which files did you use?

(don't remember when i switched to the 1.97 GPS drivers)

But i did have a version that had HD drivers in there.
I used the drivers from O.R.D.E. Kitchen v1.95.405.1.

[mondilv]

yes i know messenger is deleted but even when installed by cab? it still doenst function

I hate it, so every trace was deleted.:D
You need originally packet installer with all reg keys.
Or compare my metadata to any "original". Or try Orig_Metadata_1.96.rar from depository. But I not sure, thatROM will be fast & snable.

P.S. If I need pager, I use fring. Try to put the package "xxxnet" (from LEGO depository) in your OEM.

[ryousuke]

I hate it, so every trace was deleted.:D
You need originally packet installer with all reg keys.
Or compare my metadata to any "original". Or try Orig_Metadata_1.96.rar from depository. But I not sure, thatROM will be fast & snable.

P.S. If I need pager, I use fring. Try to put the package "xxxnet" (from LEGO depository) in your OEM.

what do you mean by 'pager' ??? didnt know there was a paging app in the stock rom...

anyway... what do i do with orig_metadata files? just replace the ones in the metadata folder? will this 'fix' the msn issue? :P

seems odd to have gprs working for all except this one program which alot of people will likely use?

[pietrucci]

hi suiler and mondilv,

I benchmarked both of your ROMs: Dia Duit pre4 and KitchenTree Grey See my regular thread).
mondilv's KitchenTree benchmarks very fast! Much faster than the 2.0 based Dia Duit...
I'm sorry suiler, I've benchmarked some other 2.0 based ROMs, results are not so good. To me they also don't FEEL so fast...

Our friend udK stated the same about 2.00 in his thread, so I have to agree with him (for now)...


How about this?

[mondilv]

what do you mean by 'pager' ???
"Fring" is the internet pager + Voip: include ICQ, AIM, Yahoo, MS LiveMessenger, GoogleTalk, Skype, SIP etc. protocols.
In one package.


anyway... what do i do with orig_metadata files? just replace the ones in the metadata folder? will this 'fix' the msn issue? :P

... forget:)
If WindowsLive is so necessary for your happy life, I'll try to build the cab.

[ryousuke]

"Fring" is the internet pager + Voip: include ICQ, AIM, Yahoo, MS LiveMessenger, GoogleTalk, Skype, SIP etc. protocols.
In one package.


... forget:)
If WindowsLive is so necessary for your happy life, I'll try to build the cab.

that'll be great... i tried fring software... it doesnt suit my taste... prefer msn :D

thanks in advance bro...

one last thing...

"ATTENTION: Connection setup has NOT auto start! Start it manually from settings menu.
After use you can uninstall it... and install again for change provider's configs.
Spending a lot of money for "roaming data traffic" could make everybody to be careful.

The best way - look inside "provision.zip" and make your own config file. Put it in "Install" folder and line as
"XML: \Storage\Install\provider.xml" to "sdconfig.txt".
Password for provision.zip you can find at the help page of Connection setup."

having 'slight' issues with this...

want to keep it in the rom as i do change sim in my phone from time to time (not the diamond as yet cause having ironed out bugs)...

but i copied diamond_package_connection
so it does the auto config on initial boot up... which works fine...
BUT after i go into settings... and try it again it comes up with the error - 'error in database'... what can be wrong?

[ryousuke]

seems access is denied to quick GPS aswell :\

[mondilv]

BUT after i go into settings... and try it again it comes up with the error - 'error in database'... what can be wrong?
Hm, really.
Thanks for founded bug:)
I'll see tomorrow.
Problems to quickgps - is result of wrong network settings.

[ryousuke]

cheers mate... looking forward :)

[ryousuke]

Are you talking about "PIN-pad"? If so - PhoneCanvas/phcanOverbmp.dll

...MS messenger/Live is deleted. Compare not-touched *.provxml in OperatorPKG & from kitchen. Also - "rgu" in xxxconfig: deleted from "Today".
Or use the cab. (You can find it at the xda)

no no not pin pad...

'start' icon as in the windows flag icon... i want to change it back to default too ;)

cant get used to the bubble... where's the dll located? i can change it after i cook the rom but i want it to be perminately changed

[Noonski]

I used the drivers from O.R.D.E. Kitchen v1.95.405.1.

Yeah i switched around from drivers since then.

Went back to 90% of 1.95 drivers and only a stuff i found updated in 1.96, 1.97 and 2.0 i ported over.

no no not pin pad...

'start' icon as in the windows flag icon... i want to change it back to default too ;)

cant get used to the bubble... where's the dll located? i can change it after i cook the rom but i want it to be perminately changed

You mean the shellres.192.dll.

You have to take it out of the module folder and then use the regular file.

Or you can copy the shellres.192.dll and then rename it to shellres.192.dll.0409.mui or shellres.192.dll.0413.mui depending on your Rom language.

Shadowing the DLL with the MUI is safer for the system then actually replacing the icons in the main systems dll.

Also check it the Rom your cooking has all certificate security disabled and extra certificates added. Or it won't accept the use of the unsigned DLL (or you could resign the DLL.mui)

So is dont know which method was used to replace the icon here but at least you know which files your looking for.

[ryousuke]

You mean the shellres.192.dll.

You have to take it out of the module folder and then use the regular file.

Or you can copy the shellres.192.dll and then rename it to shellres.192.dll.0409.mui or shellres.192.dll.0413.mui depending on your Rom language.

Shadowing the DLL with the MUI is safer for the system then actually replacing the icons in the main systems dll.

Also check it the Rom your cooking has all certificate security disabled and extra certificates added. Or it won't accept the use of the unsigned DLL (or you could resign the DLL.mui)

So is dont know which method was used to replace the icon here but at least you know which files your looking for.

sorry mate... there's a few methods above, abit unclear on some of the methods... i'll prob have to wait for mondilv to advise how he would change the start button/icon back to stock... :)

[mondilv]

i'll prob have to wait for mondilv to advise how he would change the start button/icon back to stock... :)
The easy way - use shellres.192.dll.0409.mui (don't remember icon's position)
I use changed Base_DPI_192/shellres.192.dll (icon positions 292&293)
You could need recmod.exe, reversmode.exe & G'reloc/M'reloc to finish.
Or, try the stupid way: just replace folder shellres.192.dll with hacked from my kitchen, then - G'Reloc.
It could work:)
And don't forget disable policies.

[Noonski]

Start icon is at two positions

4609

and

4617

I replace both never bothered checking which one it should actually really be.:D:D

[ryousuke]

I use changed Base_DPI_192/shellres.192.dll (icon positions 292&293)

replacing the files now... let you know if it works :D
(edit: changed and works perfect) thanks boys...


thanks mondilv / noonski

just need to get msn working... this is my next priority... please please please advise what can be the issue as everything else is great now... (connection setup still has database error after install)
then look at tomtom/gps if i can get it to sync fasterlol... prob will need to experiment with new radios...

[mondilv]

just need to get msn working... .
I did it, but with disabled uninstall. As usually, by M$ opinion, M$ products are the most necessary for us.:mad:
Standard methods don't works.
So, I can't spend more time for uninstall problem. The best way for uninstall will be hardreset:).
connection setup still has database error after install)
Fixed.

All - in CABs repository: http://rapidshare.com/users/E8A83X

ryousuke, thanks for help, you are very attentive beta-tester! :)

[mondilv]

Updated - see the first post.

[ryousuke]

I did it, but with disabled uninstall. As usually, by M$ opinion, M$ products are the most necessary for us.:mad:
Standard methods don't works.
So, I can't spend more time for uninstall problem. The best way for uninstall will be hardreset:).

Fixed.

All - in CABs repository: http://rapidshare.com/users/E8A83X

ryousuke, thanks for help, you are very attentive beta-tester! :)

where can i get the fix for msn? hard reset no issue for me...

my pleasure to help with bug squashing ;)

[ervee]

Any mirrors (no rapidshare) please ?

Downloads keep crashing here (with multiple download managers) and takes me forever because of the RapidSux time-out. I dont have a problem paying for something but not for such. I'd prefer to buy the programmer coffee :P

[ryousuke]

Any mirrors (no rapidshare) please ?

Downloads keep crashing here (with multiple download managers) and takes me forever because of the RapidSux time-out. I dont have a problem paying for something but not for such. I'd prefer to buy the programmer coffee :P

what file(s) do you need? it'll be hard to mirror everything from rapidshare... there's quite a bit with this 'lego' kitchen... :)

[mondilv]

where can i get the fix for msn? hard reset no issue for me...

WindowsLive - in the repository. But it is uninstallable. You could try to find Instant Messenger only at M$ site.
Or be patience to FULL version. During the week, I think.

[the_scotsman]

I'm using your NATALY ROm, but I want to try to cook my own with this kitchen.

I have no idea what I need to do? WHich files from the LEGO repository do I need? I'm a little confused :confused:

[ryousuke]

RESOURCES
"LEGO": http://rapidshare.com/users/JW7QII

go there and download the kitchen... there you can download packages aswell...

[the_scotsman]

Thanks, but which file is the kitchen?

[mondilv]

Prepared_DIAM_WWE_KitchenTree_1.96_NATALY.RAR + PACKAGES_00 (+01, +02 - up to you)

[mondilv]

Thanks, but which file is the kitchen?

Prepared_DIAM_WWE_KitchenTree_1.96_NATALY.RAR
+ PACKAGES_00 (+01, +02 - up to you)
+ os.nb.12pp.rar/ os.nb.8pp.rar - recommended.
Little advice: don't make the rom bigger, then 72-75M. It's tuned for "light" weight.

[helgee]

Hi , mondilv.....

[mondilv]

SYS20954 added to repository.
Happy New Year to everybody!

[cxm7105164515]

THANKS very much!Happy new year!

[macpuarsa]

There is a lot of base rom image can not be extracted, all showing error with no image file, only a few can fully extracted, do you know what is the problem...................

[Röchelhilpert]

How to extract any RAR without any message error? (I'm using Winrar 3.80)

I have the same problem .... File is extract SIZE 5 MB

is this correct. I testet 8Mb and 12Mb Version

[mondilv]

i have the same problem .... File is extract size 5 mb

is this correct. I testet 8mb and 12mb version

5m - is the right size. For empty container. (OS.NB)

[Röchelhilpert]

Can you fix the problem with this two files ... so everybody is sure that all is correct ?

[Noonski]

In case you missed it.

http://forum.xda-developers.com/showthread.php?t=446652

5.2.21009.1.6.0

Provided by Da_G

[mondilv]

In case you missed it.

http://forum.xda-developers.com/showthread.php?t=446652

5.2.21009.1.6.0

Provided by Da_G

Thanks!
Interesting. Will try soon.

[mondilv]

oops, 21109 already is present...
Still not here, but... :)

[GlemSom]

I just tried the Prepared_DIAM_WWE_KitchenTree_1.96_NATALY.RAR.
I haven't added any packages.
Sadly the build didnt go very well. It ends with the message: "Executing ..\TOOLS\NBMerge with data chunk size = 0x800 and extra chunk size = 0
x8
on file os-new.nb
Partition 0: start sector: 0x00000002, total: 0x0000003e
first used: 0x00000002, used: 0x00000006
Partition 1: start sector: 0x00000040, total: 0x00000900
first used: 0x00000040, used: 0x000007c8
Partition 2: start sector: 0x00000940, total: 0x000025c0
first used: 0x00000940, used: 0x0000259f
Checking os-new.nb for bad NAND block marker
Checked 0x2f00 sectors successfully!
Done.
Could Not Find C:\NATALY_TREE\temp\boot.hv
Could Not Find C:\NATALY_TREE\temp\boot.rgu
Press any key to continue . . .".
I tried flashing anyway - and the device does not boot.

So, what do I need to have a working kitchen tree?

[mondilv]

MSXIP21109 added.
SYS21109 - bit later.

[mondilv]

I tried flashing anyway - and the device does not boot.
So, what do I need to have a working kitchen tree?
Try new one (in "LEGO" - 1.1.1)
May be more lucky.:)

[losdrivare]

Try new one (in "LEGO" - 1.1.1)
May be more lucky.:)

I have the same problems, boot.rgu is reported as "not found" although I can see it in what seems to be the correct folder. I have tried both DIAM_WWE_KitchenTree_1.1_NATALY_LIGHT and WWE_DIAM_OS764_B764_12PP_NATALY_V1.1.1_KITCHEN.

What I do is:
1. Extract the RAR getting error msg: Invalid or corrupt authenticity information
2. Start !COOK
3. Follow instructions, choosing Diamond and os_new.nb in HTC ROM Tool etc.

What also is weird is that my output size is 62.3 MB for Light ROM (73.5 MB for 1.1.1). Your Light is only 51.1 MB. :confused:

No packages are removed or added, I'm only testing. I am using Vista. I haven't dared to flash them yet... :o

Hope we can get it to work, it would be awesome to be able to tailor-make the cooked-in apps with your blazingly fast ROM as base! :)

PS. Congrats on the benchmark score in Pietruccis thread!

[mondilv]

I have the same problems, boot.rgu is reported as "not found" although I can see it in what seems to be the correct folder.

Don't worry, I see it too. :D

What also is weird is that my output size is 62.3 MB for Light ROM (73.5 MB for 1.1.1). Your Light is only 51.1 MB. :confused:
Hm, recook "Light" rom : 65M
51M - may be in "rar"?

[losdrivare]

Ah, of course. :p Extracted your light RAR, the .nbh was 61.8 MB, pretty close to the 62.3 MB that I cooked but not exactly the same.

Might be close enough to make me take the plunge and dare to flash it and see if it works, especially since you get the "boot.rgu not found" too! :)

[GlemSom]

I found out why I'm getting that "Could Not Find C:\KITCHEN\temp\boot.rgu" error.
It comes from the "9.CreateROMDiamond.bat" script trying to delete boot.rgu - which is not possible because that file is marked as "hidden".

I've tried with the latest kitchen and latest sys... The OS is still not able to boot.

[Noonski]

oops, 21109 already is present...
Still not here, but... :)

Cool,

Do you know if that 21109 build is another test build like the 21009 version?

Reading some issues with the 21009 version related to Active sync and Audio.

On NATF's Fuze Rom Thread.
http://forum.xda-developers.com/showpost.php?p=3124343&postcount=2601

[marcolero]

I found out why I'm getting that "Could Not Find C:\KITCHEN\temp\boot.rgu" error.
It comes from the "9.CreateROMDiamond.bat" script trying to delete boot.rgu - which is not possible because that file is marked as "hidden".

I've tried with the latest kitchen and latest sys... The OS is still not able to boot.


I also had this problem. and the really was not able to boot. then I started cooking a ruusigned and then, in time to cook, replacing only the sys and oem folders from lego packages.in order not to repeat the process again, I saved in the folder boot.rgu rom / xip. works perfectly. someone has an easier solution?

[marcolero]

I can not synchronize my contacts with activesync, what's wrong?

[marcolero]

I can not synchronize my contacts with activesync, what's wrong?

problem solved. just did a softreset:p

[mondilv]

Do you know if that 21109 build is another test build like the 21009 version?
Sure, just for collection.:)
And thanks for additional info.

[azreil24]

I copied the hidden boot.rgu to the phone, and from the phone I changed the file so that it is not hidden any more :). Hope it helps.


LE: Sorry, it seems that even if I changed it so it is not hidden anymore, the same erorr apears :( and with the one copyed from the "tools" folder the windows is acting strange, it doesn`t install all the programs.

LLE: I copied the content of the hidden boot.rgu into the one from the "tools" folder and it worked now. I tried the base Kitchen Tree and it cooked it correctly now, no more problems. One question, if I change packages, the boot.rgu has to be modified or something else? For example I want to insert the cam drivers posted by another user a few posts ago. Thanks, sorry for the noob questions.

[marcolero]

when I use the sys_20755 version does not start. only boot with the sys that already comes in Nataly. Unfortunately, in this, the bluetooth does not work correctly.

[mondilv]

if I change packages, the boot.rgu has to be modified or something else?
No, as a rule. Only if structure of sys/oem changes radically.

[ThePhoenixUK]

Tried to download your 12MB PP from your Rapidshare folder and when I download the RAR and try to extract I get:

Invalid Or Corrupt Authenticity Information

Redownloaded twice, same issue, then tried IE instead of Firefox and still same problem.

Is this a issue as I don't want to try my first attempt at cooking with a corrupt file, if the rar is damaged could you rehost or attach direct to your posting.

Many thanks,