spv c600 in mode bootloader after bad unlock!

[errachidi]

hi; can somene tell me how to solve my problrm, my spv c600 always on bootloader after bad unlock, i try to reflash by upgrade rom , but connection is not etablished by active syncro !!
how to forced my phone for connection with soft upgrade!!

[muiz2]

same here, no matter what it stays in bootloader

[puffin_nugs]

active sync will not connect in bootloading mode. if you still hear the connection sound (the sound you hear plugging in any usb device)on your pc then it is connected to the pc and can flash a new rom

follow this guide exactly (proabbaly were doing this now just finish from where you left off)
http://karhoe.net/guide-upgrading-htc-tornado-to-windows-mobile-6

[muiz2]

I hear the USB connecting sound, but tera Term says canot open

[thacen]

Before you try tera term, go to connection setting of Activesync and uncheck 'Allow USB Connection', otherwise teraterm cannot connect your phone.

[muiz2]

Before you try tera term, go to connection setting of Activesync and uncheck 'Allow USB Connection', otherwise teraterm cannot connect your phone.
Still no go

[Docsboard]

did u ever find a solution?

[thacen]

In bootloader mode activesync cannot connect. But you can flash rom directly using ROMUpdateUtility in this mode. Best thing is try with original factory rom.

Another possibility of going to bootloader screen on every startup could be of hardware problem. I also faced similar problem frequently.. but I resolved the problem. My case was because of my camera button.. it actually is not working properly and sometimes remain stuck in, then my handset goes to bootloader on every startup..In that case i just pull it up using some sharp edge.

So, check for any hardware problem to, sometimes cleaning could also help.