PDA

View Full Version : CPU information needed


emil3m
12th December 2008, 07:08 PM
the sch-i910 is listed to have a Marvell PXA270/PXA312/PXA320 processor

device database on this website suggests it's the PXA320, Microsoft lists the PXA270, several (normally reliable websites) list the PXA312

anyone knows how can I find out for sure ?


thanks for your time!

Ravicai
20th December 2008, 02:39 AM
Bump for a good question.

Cal-El
20th December 2008, 04:11 AM
Bump for a good question.
The pxa270 is a 520 MHz
The pxa310 is a 624 MHz
The pxa312 is a 624 MHz as well but for 3.2" 400x 240 res
The pxa320 is a 800 MHz
So I think the sch-i910 has the pxa312 as per the 624 MHz and screen size and res! Hope this helps!:)

emil3m
20th December 2008, 04:51 PM
Ravicai, thanks !

dashmaster, I think what you said does make sense, especially considering the difference between 310 and 312

would you reccomed upping the clock speed to 620 ? because I think it's underclocked

nir36
21st December 2008, 07:52 PM
for future reference you can use www.pdadb.net to check specifications..

emil3m
21st December 2008, 07:59 PM
for future reference you can use www.pdadb.net to check specifications..

I actually mentioned in my original post that I have checked the "device database" on this website on this website (which is a link to pdadb)

in fact I pretty much went on around 20 different websites, and at the time opinions have split among the aforementioned models

I'm also aware of the fact that Omnia comes in about 8 different models around the world so I made sure to look for i910.

as of today www.pdadb.net was updated and the only versions to carry the PXA320 are the 490 and 495

Thanks for all your help !