[ROM] [WWE] [GSM] [28-Oct-09] NATF's v4 Final WM6.1 TP ROMs

[l3it3r]

I can't wait for 4.5! Keep up the awesome work NATF!

4.5 and TF3D2? :D

[brent1f]

NATF, thanks for the weather master cab. As it turns out, after installing the cab I still had the problem. I thought let me try to start from scratch so I deleted the forecast.db and removed all cities from weather master, soft reset and selected the weather tab, nothing happened which I saw as a good thing. I then ran weather master and set one city to see if the weather tab would work and it did. I then was able to add additional cities and everything is working. I'm guessing the fact that the cities set in weather master were some how corrupt. Again, once I deleted all and then started over it worked. Thanks again for the help.

[garyfunk]

Yes. If you get an error, put the phone in flight mode, soft reset, and try again.

Speaking of, is there a way by registry, script or program to put the phone in and out of Flight Mode?

I ask because when I flash a new ROM, as soon as the phone comes on and the radio becomes active, I start getting text messages and even phone calls. At that point, I am not even ready to receive calls or data as the phone is still being configured. And then when cemail.vol and pim.vol are restored, I lose what call or data was just received.

NATF or anyone, do you have any ideas?

[tvromero]

Speaking of, is there a way by registry, script or program to put the phone in and out of Flight Mode?

I ask because when I flash a new ROM, as soon as the phone comes on and the radio becomes active, I start getting text messages and even phone calls. At that point, I am not even ready to receive calls or data as the phone is still being configured. And then when cemail.vol and pim.vol are restored, I lose what call or data was just received.

NATF or anyone, do you have any ideas?

What about pulling out the SIM card?

[garyfunk]

What about pulling out the SIM card?

That would work. It is not a prefered method, but it is better than not. Thank you. I had not thought of that.

[heweaver]

Heweaver,
After you uninstalled the sliding dialer, did you have any problems with the battery/charger icon? Mine was locking the icon, so it would not change if you plug in or unplug the charger

My battery icon acts normally. I checked it just now, and it is working as it should. I uninstalled the dialer using the steps in my post.

[josbald1975]

Speaking of, is there a way by registry, script or program to put the phone in and out of Flight Mode?

I ask because when I flash a new ROM, as soon as the phone comes on and the radio becomes active, I start getting text messages and even phone calls. At that point, I am not even ready to receive calls or data as the phone is still being configured. And then when cemail.vol and pim.vol are restored, I lose what call or data was just received.

NATF or anyone, do you have any ideas?

Gary, what is your method to copy cemail.vol from phone to SD to phone? are you using Sprite or PIM or some other method to just copy that file?

[garyfunk]

Gary, what is your method to copy cemail.vol from phone to SD to phone? are you using Sprite or PIM or some other method to just copy that file?

On cemail.vol, I use a script. Download uc.zip from my signature for the scripts and examples.

[juanikiki]

Anyone has connection issues with Internet Explorer? It always tells me "Cannot Connect with the current connection settings". Not even on wifi.

I'm having this same issue. Everything connects to the internet except pocket internet explorer. It also always tells me "Cannot Connect with the current connection settings". I flashed the phone and then hard reset, the same issue. Also re-flashed, hard reset and did not install anything, same issue.

My device is a Fuze, the ROM is the NATF 4.4 standard (not AT&T, not lite). Please somebody help!! :confused:

Something else: I did not use the "Raphael Wrapper" to flash the rom, instead I used one that was included with previous versions of the NATF roms because the wrapper tells me that I need NET CF 2.0 or something like that.

I hope I described it well enough. Thanks.:o

[dpatro]

NATF, thanks for the weather master cab. As it turns out, after installing the cab I still had the problem. I thought let me try to start from scratch so I deleted the forecast.db and removed all cities from weather master, soft reset and selected the weather tab, nothing happened which I saw as a good thing. I then ran weather master and set one city to see if the weather tab would work and it did. I then was able to add additional cities and everything is working. I'm guessing the fact that the cities set in weather master were some how corrupt. Again, once I deleted all and then started over it worked. Thanks again for the help.

I could not even install the weather master cab file. Could you please post the folder path for forecast.db file, I could not locate it? I will try to follow your steps see what happens.

[StevePritchard]

Anyone has connection issues with Internet Explorer? It always tells me "Cannot Connect with the current connection settings". Not even on wifi.
Same here - I've mentioned it a few times, but there doesn't seem to be a solution as yet.

I guess we'll just have to wait for v4.5.

Cheers,

Steve.

[garyfunk]

Same here - I've mentioned it a few times, but there doesn't seem to be a solution as yet.

I guess we'll just have to wait for v4.5.

Cheers,

Steve.

IE and 4.4 work well for me.

[kennyb123]

Gary,

With 4.4 and IE, is the text for you still microscopic? If not, how did you fix it?

I might be missing a quick feature of the new browser, but I can't seem to find it. I changed text to "largest", but that doesn't do it.

Thanks.

[garyfunk]

Gary,

With 4.4 and IE, is the text for you still microscopic? If not, how did you fix it?

I might be missing a quick feature of the new browser, but I can't seem to find it. I changed text to "largest", but that doesn't do it.

Thanks.
Yes it is. Even if the page only has one word on it, the text is small.

[Wildcard342]

Hi, Noob here. I have a Touch pro 3 phone here in Aus. I just installed the latest NATF touch pro standard rom using hardspl and it seemed to go on fine. Reset and let it go through customise and it came up ok. Now when I open the keyboard slide it will lock the phone and I have to reset it to get it going. Anyone know how to fix this??

[oo74]

Ignore this post.

[galford316]

I'm having this same issue. Everything connects to the internet except pocket internet explorer. It also always tells me "Cannot Connect with the current connection settings". I flashed the phone and then hard reset, the same issue. Also re-flashed, hard reset and did not install anything, same issue.

My device is a Fuze, the ROM is the NATF 4.4 standard (not AT&T, not lite). Please somebody help!! :confused:

Something else: I did not use the "Raphael Wrapper" to flash the rom, instead I used one that was included with previous versions of the NATF roms because the wrapper tells me that I need NET CF 2.0 or something like that.

I hope I described it well enough. Thanks.:o

I was able to hit google.com with PIE. It was very .. very slow however. I don't have a point of reference to be honest with on my phone because. I think this is like the 2nd time i have used PIE with NATF roms.

[StevePritchard]

IE and 4.4 work well for me.
Is that working when connected via ActiveSync, Wifi and GSM? It seems no matter which connection method I have in place, it's as though IE is trying to connect to the net via some other, unsupported, mechanism.

Cheers,

Steve.

[cdmencho22]

Dear Genius NATF!!!...

Your roms is great! and the quickest i found here...

I am wondering if you will consider include Manila Touch Pro 2 on your rom?

Thanks

CDMENCHO22

[l3it3r]

just tested PIE and it works fine, I use opera, skyfire and iris though, so I just tested to see if there was an issue... check your connection settings again?

[garyfunk]

Is that working when connected via ActiveSync, Wifi and GSM? It seems no matter which connection method I have in place, it's as though IE is trying to connect to the net via some other, unsupported, mechanism.

Cheers,

Steve.

Wi-Fi and GSM.

[jkhoury]

NATF, thanks for the weather master cab. As it turns out, after installing the cab I still had the problem. I thought let me try to start from scratch so I deleted the forecast.db and removed all cities from weather master, soft reset and selected the weather tab, nothing happened which I saw as a good thing. I then ran weather master and set one city to see if the weather tab would work and it did. I then was able to add additional cities and everything is working. I'm guessing the fact that the cities set in weather master were some how corrupt. Again, once I deleted all and then started over it worked. Thanks again for the help.

I was having the same crash problem. I looked at this post and all I did was delete all cities in weather master. Then go to the Weather tab and add cities from there. Weather master seems to cause the crash. I will just use the TF3D weather tab.

[belikespre]

Hi,
I was wondering if anyone noticed in 4.4 that mp3 ringers have extremely low volume. I tried using 3 different mp3s but it is still happening. The sound of the phone vibrating is lower than the actual ringtone. I tried searching but didn't get much info.

Also has anyone had trouble with the phone lock? A couple of days ago it kept saying I put in the wrong pin so I ended up hardreseting it. I think the phone lock might also be causing problems with ageye's G-Alarm. When the alarm goes off it goes straight to a maze or arithmetic question bypassing the phone lock (i have it set to 2 hrs) and it just freezes.

Thanks ia.

[AskTheAdmiN]

I need to send my fuze back to att - I downgradded to the stock rom. But my touch screen does not work. When I try to put back the original SPL it needs input from the screen - I am stuck at the digitizer page. Any ideas??

If any one knows how to get me out of this jam it has to be you NATF!

[Tofferbear]

Hi, Noob here. I have a Touch pro 3 phone here in Aus. I just installed the latest NATF touch pro standard rom using hardspl and it seemed to go on fine. Reset and let it go through customise and it came up ok. Now when I open the keyboard slide it will lock the phone and I have to reset it to get it going. Anyone know how to fix this??

Not having this problem...but a Touch Pro 3? I thought there were just now releasing the Touch Pro 2...

[chernomorez]

A bit off-topic, but does anyone has the original green WM6.1 boot png? Did the searching, couldn't find one.

[soloDOTcom1185]

...but a Touch Pro 3? I thought there were just now releasing the Touch Pro 2...

I don't think he meant the Touch Pro 3... I think he meant he has a Touch Pro on "3", one of Australia's mobile carriers. ^^;

[bpm2000]

has anyone successfully used the FM radio on 4.4 installed from the cab?

[joelpro]

I have the ATT fuze
After flashing, my physical keyboard layout is all wrong.

(The fn key is a shift key, the numbers are in the wrong place.)

Is there a way to set it right?
I already tried the Advanced Config tool > Input > keyb layout > ATT/Cing.

Is there something else I'm missing?

Thanks

[bpm2000]

you probably flashed the Touch Pro version.

[NotATreoFan]

Same here - I've mentioned it a few times, but there doesn't seem to be a solution as yet.

I guess we'll just have to wait for v4.5.

Cheers,

Steve.

pIE works fine for me. Are you modifying/restoring any connection settings?

Hi, Noob here. I have a Touch pro 3 phone here in Aus. I just installed the latest NATF touch pro standard rom using hardspl and it seemed to go on fine. Reset and let it go through customise and it came up ok. Now when I open the keyboard slide it will lock the phone and I have to reset it to get it going. Anyone know how to fix this??

Sounds like a bad flash.

Ignore this post.

OK. ;)

I need to send my fuze back to att - I downgradded to the stock rom. But my touch screen does not work. When I try to put back the original SPL it needs input from the screen - I am stuck at the digitizer page. Any ideas??

If any one knows how to get me out of this jam it has to be you NATF!

SOTI Pocket Controller (http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro). Download the trial, install it, and then load the attached CAB. I modded the CAB to install without prompts.

Good luck.

I have the ATT fuze
After flashing, my physical keyboard layout is all wrong.

(The fn key is a shift key, the numbers are in the wrong place.)

Is there a way to set it right?
I already tried the Advanced Config tool > Input > keyb layout > ATT/Cing.

Is there something else I'm missing?

Thanks

Which ROM did you flash?

[JZ SmartMort]

just tested PIE and it works fine, I use opera, skyfire and iris though, so I just tested to see if there was an issue... check your connection settings again?

Wow, you're a perfect candidate for my app. Check out my signature and see what it does if you have multiple browsers installed.

[JZ SmartMort]

SOTI Pocket Controller (http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro). Download the trial, install it, and then load the attached CAB. I modded the CAB to install without prompts.


SOTI is a new one for me, nice tool but paid soft :)

I found a few free alternatives for remotely controlling a WM device.


My Mobiler - http://www.mymobiler.com - nice tool, I really like it. I download the ZIP so I don't have to install anything.
EveryWAN - http://www.sparus-software.com - also a great app with more remote features like remote regedit and remote task manager.

Enjoy!
JZ

[joelpro]

Which ROM did you flash?

I used NATF 4.4 standard for touch pro.

It says in the description, the only difference between the two roms are the AT&T logos. Getting rid of the logos was one of the reasons I wanted to flash in the first place, so I went with pro...

[StevePritchard]

pIE works fine for me. Are you modifying/restoring any connection settings?

No. If I find time I'll try and hard reset, and try it from scratch.

The only thing I do (once the Connection Setup app has defined my settings) is:

1. Delete the proxy from the connection, if it has put one in. Nothing seems to work with a proxy defined (or at least the one that the Connection Setup sometimes puts in).
2. Set the programs that should connect to a private network to use the "T-Mobile Internet" connection (the same as the programs that automatically connect to the internet).

Cheers,

Steve.

[Wildcard342]

Not having this problem...but a Touch Pro 3? I thought there were just now releasing the Touch Pro 2...

Soz, 3 network phone.I tried installing romeos2 over the top and everything is working fine now and its damn quick. May have been a bad flash but everything went like the instructions said they would.

[NotATreoFan]

I used NATF 4.4 standard for touch pro.

It says in the description, the only difference between the two roms are the AT&T logos. Getting rid of the logos was one of the reasons I wanted to flash in the first place, so I went with pro...

The Fuze Standard ROM does not have any AT&T logos. It is just pre-configured for the AT&T network, and the Fuze keyboard layout.

[viperez]

Let me first say that I really enjoy your ROMs. It's the only one I use on my phones.

With this latest ROM I have encountered an issue. My TouchFlo stops working and I get a message that says tap here to start TouchFlo 3D. I tap the screen and it tries to start TouchFlo but nothing changes. I also cannot make or receive calls when this happens. The only way to get the phone working is to reload the OS.

I'm not sure if this is related to the ROM or if it is an unrelated issue. If anyone has any ideas let me know!

[garyfunk]

Let me first say that I really enjoy your ROMs. It's the only one I use on my phones.

With this latest ROM I have encountered an issue. My TouchFlo stops working and I get a message that says tap here to start TouchFlo 3D. I tap the screen and it tries to start TouchFlo but nothing changes. I also cannot make or receive calls when this happens. The only way to get the phone working is to reload the OS.

I'm not sure if this is related to the ROM or if it is an unrelated issue. If anyone has any ideas let me know!

I ran into this problem. It turned out to be a bad pim.vol file.

[joelpro]

The Fuze Standard ROM does not have any AT&T logos. It is just pre-configured for the AT&T network, and the Fuze keyboard layout.

I see, thanks I'll try re flashing then.
I'm assuming even though it is pre-configured for ATT, I can change settings to suit any provider?
Sorry I'm kind of a noob.

[TransNone13]

I'm not sure what it is, but after flashing from 4.3 my battery is getting SMOKED! It'll die in 4 hours and I only have it checking email every 30 minutes. It lasted much longer with the 4.3. What's going on?

[NFRCER]

pIE works fine for me. Are you modifying/restoring any connection settings?


NAFT PIE doesnt work for me as well, be it ActiveSync,Edge,3G,Wifi and so on. I have already tried Fuze Lite, Touch Pro Standard and currently in the Touch Pro Lite. Only missing to try Fuze Standard :p
I do not use PIE but it works quite well to download certain things Opera wont allow :)

[rocho]

Ive been playing with version 4.4 about 2 days with the following problem:

- can't navigate with Opera/IE with Data Plan (already installed removeHiddenProxy4CWS_1219.cab) when is trying to open page/transfer data it constantly switch between 3G/H (connected) at the taskbar without opening any page...

anyone? :)

[TransNone13]

BUMP


Please help! (Battery Issue)

[l3it3r]

I have no battery issues, do you use anything that has an active connection such as palringo or a twitter app?

[TransNone13]

I have no running applications under task manager, i have all the power saving options enabled, and my data connection is set to terminate in 1 minute. All I can do is try my spare battery. Doubt it's died already.

[togles]

Hey NATF! Sweet ROM, I am much happier with your 4.4 cooked ROM than with the ATT standard one. Ultimately, I just love this phone compared to my TILT, which was awesome as well.

The only thing I would change about the phone is to remove the calendar and contacts soft keys at the bottom of the screen. I would rather give those up for more real estate on the screen as I slide the navigation from left to right for the various functions.

Is there anyway I can turn this off? I thought that I had seen a cab that you had that would do this, but I cannot seem to find it.

Thanks! Awesome ROM

[TransNone13]

Does this new ROM try harder to get a signal than prior ones? Maybe being somewhere with no service for an hour or two is what's killing my phone.

[Beknatok]

Does this new ROM try harder to get a signal than prior ones? Maybe being somewhere with no service for an hour or two is what's killing my phone.

My only other thought/question to investigate, presuming you're running a NATF 4.4 stock, is to look into which radio you are running? Different radios also impact your battery drain, so hop over to the radio thread, read up, and try a different one out.

[bpm2000]

Hey NATF! Sweet ROM, I am much happier with your 4.4 cooked ROM than with the ATT standard one. Ultimately, I just love this phone compared to my TILT, which was awesome as well.

The only thing I would change about the phone is to remove the calendar and contacts soft keys at the bottom of the screen. I would rather give those up for more real estate on the screen as I slide the navigation from left to right for the various functions.

Is there anyway I can turn this off? I thought that I had seen a cab that you had that would do this, but I cannot seem to find it.

Thanks! Awesome ROM

i vote no - we dont have a calendar tab yet and i use the contacts soft key all the time. :D

[metal450]

I'm not sure what it is, but after flashing from 4.3 my battery is getting SMOKED! It'll die in 4 hours and I only have it checking email every 30 minutes. It lasted much longer with the 4.3. What's going on?

The mysterious battery problems have been discussed dozens of times in this very thread. Rather than mucking it up and making it even longer by repeating the same questions over and over, please go back and read. Yes, the thread is long. But it's long because people continue to ask the same questions.

[galford316]

I'm not sure what it is, but after flashing from 4.3 my battery is getting SMOKED! It'll die in 4 hours and I only have it checking email every 30 minutes. It lasted much longer with the 4.3. What's going on?

I had notice my battery life not as good as before the flash. Somebody on this board suggested I reflash the radio. I read that as relash to the same radio and it has been fine for me ever since. Meh.. take it for what its worth. I just know it worked for me

[Red5]

Im anticipating 4.5 with the new TF3D from the TouchPro2. What an updrage that would make!

[garyfunk]

BUMP


Please help! (Battery Issue)

I am running 4.4S and my battery lasts all day. I have 5 email acounts that check every 5 minutes and do about 50 text messages a day, plus about an hour of talk time.

[jtsurfs]

I have been running 4.4 for almost a week and have absolutely no battery issues. I have 3 emails setup that check automatically every 2 hours and I constantly am getting text messages.

For those complaining about battery life, what is your signal like where you are most of the day. Meaning do you have only a couple of bars or does your signal change between 'H' and 'E' often? I have noticed and read on this forum that this may be a cause of battery issues which does point back to radio. Maybe the people complaining about battery life do not have the correct radio for their location. The radio that works best for someone in Southern California (such as myself) may not be the same as someone in New York, for instance. I have found that the radio which provides the strongest signal for me has been the 1.11.25.01, but others have complained that radio kills the battery. I would suggest some experimentation with different radios to find the one which works best for your location. Just my 2 cents and what I have figured out over the last 4 months of owning this phone. Of course most of this was gathered from researching this forum and some experimentation of my own.

[|oLo|]

I have been running 4.4 for almost a week and have absolutely no battery issues. I have 3 emails setup that check automatically every 2 hours and I constantly am getting text messages.

For those complaining about battery life, what is your signal like where you are most of the day. Meaning do you have only a couple of bars or does your signal change between 'H' and 'E' often? I have noticed and read on this forum that this may be a cause of battery issues which does point back to radio. Maybe the people complaining about battery life do not have the correct radio for their location. The radio that works best for someone in Southern California (such as myself) may not be the same as someone in New York, for instance. I have found that the radio which provides the strongest signal for me has been the 1.11.25.01, but others have complained that radio kills the battery. I would suggest some experimentation with different radios to find the one which works best for your location. Just my 2 cents and what I have figured out over the last 4 months of owning this phone. Of course most of this was gathered from researching this forum and some experimentation of my own.

Well...I've tried all releases (currently at 4.4) various radios and this is the first time I have ever seen battery drain like this. I've heard people talk about it but this is my first experience.
I am currently using the black stone radio 1.09.25.35. It worked great on 4.3
I am currently trying to reflash the same radio...if not...then I'll go back to the lastest stock radio or what ever works best for me (as previously stated)

[jeepers007]

The only thing I would change about the phone is to remove the calendar and contacts soft keys at the bottom of the screen. I would rather give those up for more real estate on the screen as I slide the navigation from left to right for the various functions.

Is there anyway I can turn this off? I thought that I had seen a cab that you had that would do this, but I cannot seem to find it.

Thanks! Awesome ROM

You might try this:
http://www.nuerom.com/BlogEngine/page/nueNoBar.aspx

Or even the Vijay555 solution...

http://forum.xda-developers.com/showthread.php?t=243211

I have not tried either of these on the Raphael.

Wisbar also has the capability, but is not free.

[Stankmer]

When I first flashed 4.3 I had rapid battery drain. Someone on here said to charge it overnight after flashing. I left it on the charger for about 12 hours after getting it to 100%, and my battery drain went back to normal.
Right after I flashed 4.4, I had the exact same 1% per minute battery drain like I did with 4.3. I did the same charging overnight like I did with 4.3 and it fixed it as well.
I don't know why, but it worked and I'm happy now. I'm on the stock AT&T radio 1.02.25.32. "Tofferbear" had same battery drain issues. His were resolved I think also, but I forgot what he did.

[NotATreoFan]

I will be going out of town for 10 days this coming Saturday night. I will still be on XDA in full capacity, minus uploading ROMs.

I am looking to release the new ROMs on Saturday afternoon, and they will be complete tear downs of the shipped ROMs. The Touch Pro ROMs will be based on the Official 5.05 WWE ROM, and the Fuze ROMs will be based on the [soon-te-be] Official 5.08 AT&T ROM.

This is quite a bit of work, so Saturday afternoon is the earliest I can promise... but they will come sooner if I have the time. :)

[bbianchi]

I will be going out of town for 10 days this coming Saturday night. I will still be on XDA in full capacity, minus uploading ROMs.

I am looking to release the new ROMs on Saturday afternoon, and they will be complete tear downs of the shipped ROMs. The Touch Pro ROMs will be based on the Official 5.05 WWE ROM, and the Fuze ROMs will be based on the [soon-te-be] Official 5.08 AT&T ROM.

This is quite a bit of work, so Saturday afternoon is the earliest I can promise... but they will come sooner if I have the time. :)

Dude you rock! I gotta give it to you, ive been running 4.4S for about 4 days now and its totally killing the stock ROM. I get much better battery life, and the phone is a lot more peppy and responsive. I also upgraded my radio to the newest firmware that came from the 5.08 ROM and I can say this phone is the closest to my SE w810i in call performance ive ever seen. Puts the iPhone to utter shame.

I am looking forward to this Saturday.

[rareness4]

I will be going out of town for 10 days this coming Saturday night. I will still be on XDA in full capacity, minus uploading ROMs.

I am looking to release the new ROMs on Saturday afternoon, and they will be complete tear downs of the shipped ROMs. The Touch Pro ROMs will be based on the Official 5.05 WWE ROM, and the Fuze ROMs will be based on the [soon-te-be] Official 5.08 AT&T ROM.

This is quite a bit of work, so Saturday afternoon is the earliest I can promise... but they will come sooner if I have the time. :)

Thanks for your work. Even though it's a minor annoyance, I still have icon flashing problem, setting it to Read-Only fixes it, but I was wondering if there is anything I need to do or download to prevent the icon flashing after every new program I install. Thanks again

[everythingtonothing.com]

is anyone else having a problem on their fuze where when someone calls it doesnt let you answer it. like if you press the phone button it does nothing and even the slider to answer does nothing?

[msdtra]

is anyone else having a problem on their fuze where when someone calls it doesnt let you answer it. like if you press the phone button it does nothing and even the slider to answer does nothing?

I had that problem on V4.3 but since I flashed to V4.4 I haven't experienced same problem.

I kept missing calls and would goto voice mail.

[everythingtonothing.com]

yeah, whenever i go to use the slide to answer it just doesn't answer.

[telegraph0000]

Am I missing something? I don't see that option...and I really hate the fact that I can't fit everything on the screen without having to scroll aound. Any ideas?

edit: ignore my sig. running 4.4

[joelpro]

Am I missing something? I don't see that option...and I really hate the fact that I can't fit everything on the screen without having to scroll aound. Any ideas?


I know opera has a "mobile view" option which does that, but I don't know about IE

[telegraph0000]

*sigh* great...I removed something and now the battery meter no longer shows the % with the green/yello/red icon...what did I do

[AskTheAdmiN]

SOTI Pocket Controller (http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro). Download the trial, install it, and then load the attached CAB. I modded the CAB to install without prompts.

Good luck.



I am stuck on the digitizer screen and can not load a cab!

[Royalmathmtcs]

*sigh* great...I removed something and now the battery meter no longer shows the % with the green/yello/red icon...what did I do

FInixNOverBatteryIconsOnly.cab (http://rapidshare.com/files/201954216/FInixNOverBatteryIconsOnly.cab)

[AskTheAdmiN]

I am stuck on the digitizer screen and can not load a cab!

I can put the original spl on the memory cards root and execute a flash from using the Volume down and the power buttons. But even though I renamed RUU_Signed.nbh to RAPHIMG.nbh it still says No Image!

Help please I need to send this guy back today!

[l3it3r]

Looking forward to 4.5, will it be infused with tf3d2? If not, it's not a deal breaker :D I'd rather use NATF ROMs w/out than an 'unknown' with it! I can always add it in myself when they release the files

[garyfunk]

I can put the original spl on the memory cards root and execute a flash from using the Volume down and the power buttons. But even though I renamed RUU_Signed.nbh to RAPHIMG.nbh it still says No Image!

Help please I need to send this guy back today!

Is your SD Card a Transcend or Kingston? I bet it is not a Sandisk.

[l3it3r]

for some reason I've never had an issue with sandisk [insert "well duh" simley here]

[JoeTheFro]

I can put the original spl on the memory cards root and execute a flash from using the Volume down and the power buttons. But even though I renamed RUU_Signed.nbh to RAPHIMG.nbh it still says No Image!

Help please I need to send this guy back today!

What happens when you plug your phone in via USB to PC, then turn phone on and get to the loader/digitizer screen?

Hopefully, the screen says USB at the bottom, and the PC detects the device.

[Red5]

I will be going out of town for 10 days this coming Saturday night. I will still be on XDA in full capacity, minus uploading ROMs.

I am looking to release the new ROMs on Saturday afternoon, and they will be complete tear downs of the shipped ROMs. The Touch Pro ROMs will be based on the Official 5.05 WWE ROM, and the Fuze ROMs will be based on the [soon-te-be] Official 5.08 AT&T ROM.

This is quite a bit of work, so Saturday afternoon is the earliest I can promise... but they will come sooner if I have the time. :)TF3D from the TouchPro2? :D

[justinld50]

I had to upgrade to NATFv4.4 this sunday after the timebomb went off in my old v4.0. Now the keyboard on my att fuze does not function correctly. I can no longer use the FN button as it now works like a capslock or shift. The top row of buttons now produces numbers rather than special characters so i have to type numbers blindly.

[harpo1]

I had to upgrade to NATFv4.4 this sunday after the timebomb went off in my old v4.0. Now the keyboard on my att fuze does not function correctly. I can no longer use the FN button as it now works like a capslock or shift. The top row of buttons now produces numbers rather than special characters so i have to type numbers blindly.

You probably flashed the Touch Pro Rom instead of the Fuze Rom. I'm pretty sure there's a cab to fix the keyboard layout but you'll have to do a search for it.


Here's the link for the fix.
http://forum.xda-developers.com/showthread.php?t=469450&highlight=keyboard+layout+cab&page=304

[Shaherwala]

A very nice version of rom, very fast i would say.
But when i upgraded it, dere are a few eroors i would like you to note, and i hope u can find the solutions to them.

being

1. Alarm is not working. You can set the alarm but it doesnt work.

2. WHen chagning from portrait to landscape mode, while messaging, screen goes bonkers sometimes lol!

3. No good ringtones.

Rest in all very nicely done.

[silenthatred]

A very nice version of rom, very fast i would say.
But when i upgraded it, dere are a few eroors i would like you to note, and i hope u can find the solutions to them.

being

1. Alarm is not working. You can set the alarm but it doesnt work.

2. WHen chagning from portrait to landscape mode, while messaging, screen goes bonkers sometimes lol!

3. No good ringtones.

Rest in all very nicely done.

An even better reason to use G-Alarm! I'm pretty sure I used the standard alarm without issue with this rom, but can't say for sure 100% and I don't have it currently to test. I've yet to find a ROM where I liked the ringtone used, although Ninja Gaiden takes me back to like 6th grade. I make my own ringtones anyways. You should do the same. We are all individuals, so it's preference.

[jtsurfs]

A very nice version of rom, very fast i would say.
But when i upgraded it, dere are a few eroors i would like you to note, and i hope u can find the solutions to them.

being

1. Alarm is not working. You can set the alarm but it doesnt work.

I have not experienced this and I use the alarm on a daily basis.

2. WHen chagning from portrait to landscape mode, while messaging, screen goes bonkers sometimes lol!

This is not a problem with this ROM as it happened in the original AT&T rom, more of an issue with the device. If you do a search you will see this has been discussed to death.

3. No good ringtones.

Rest in all very nicely done.
Can't help you with that one, somethings you have to do for yourself!

[NotATreoFan]

Thanks for your work. Even though it's a minor annoyance, I still have icon flashing problem, setting it to Read-Only fixes it, but I was wondering if there is anything I need to do or download to prevent the icon flashing after every new program I install. Thanks again

Hopefully the full tear down of the original ROMs will fix this.

Looking forward to 4.5, will it be infused with tf3d2? If not, it's not a deal breaker :D I'd rather use NATF ROMs w/out than an 'unknown' with it! I can always add it in myself when they release the files

Not yet. I'm gonna play with it while I'm out of town, and depending on the stability, it will be in v4.6.

TF3D from the TouchPro2? :D


Not yet. I'm gonna play with it while I'm out of town, and depending on the stability, it will be in v4.6.

[I love copy-n-paste... take THAT Apple! :D]

[andrewstrauss]

is anyone else having a problem on their fuze where when someone calls it doesnt let you answer it. like if you press the phone button it does nothing and even the slider to answer does nothing?

This happens to me sometimes too....started happening in 4.2, I didn't get a chance to upgrade to 4.3 before 4.4 came out. It still happens to me in 4.4. I have disabled the htc slide-to-answer dialer. I am running the lite version of 4.4 on my fuze

[DrzNight]

@NATF

I know your going to be super busy the day that you release the 4.5 rom but i was wondering if you could try and upload the kitchen before you head off that night. I love tweaking my roms to install exactly what I want one so that'd be super cool. It might be too much to do in one day but just in case you get the chance :)

[slombar]

When I receive calls, all I get is the small windows mobile popup that I'm getting a call, no HTC slide2dial or anything. I've gotten S2U2 to work, but its sluggish sometimes. How can I fix this?

[nextascy]

NAFT

My apology if this has been discuss, but will the new AGPS setting be included in 4.5? As you can see in the forum, Da_G has tested AGPS with the new 5.08 rom, with some registry changes, and looks like it's a go. Confirm by another moderator also.

[harpo1]

NAFT

My apology if this has been discuss, but will the new AGPS setting be included in 4.5? As you can see in the forum, Da_G has tested AGPS with the new 5.08 rom, with some registry changes, and looks like it's a go. Confirm by another moderator also.

It's not the ROM it's the radio that came with it. I'm using NATF 4.4 with the new radio and AGPS enabled and I'm getting locks within 5 seconds everytime from within my house.

[reluttr]

Hopefully the full tear down of the original ROMs will fix this.



Not yet. I'm gonna play with it while I'm out of town, and depending on the stability, it will be in v4.6.




Not yet. I'm gonna play with it while I'm out of town, and depending on the stability, it will be in v4.6.

[I love copy-n-paste... take THAT Apple! :D]
TF3D2 is really stable "and extreamly responsive and quick", but it has not been completely resized. So a couple of things do not fit on the screen ex the calendar, music player, and some of the sub menus dont scroll all the way to the bottom.

From what I have heard the earliest we will get it is next week, however that is not set in stone because there is alwase the chance something might be tough to fix.

[gj83]

1. Alarm is not working. You can set the alarm but it doesnt work.


I've been flashing this rom since like 2.x and use the alarm routinely. It has not worked since I flashed 4.4 either. Ironically this was also the first time I did a hard reset after flash. I haven't tried reflashing to verify it is really the ROM and not something else. I think I will try another alarm because I never really liked the Fuze alarm to begin with.

Some other issues I've had with this version that I didn't have with others: I can't Dismiss certain appointments using the softkey.

ETA:
I installed G-Alarm and it said I had a Windows Alarm bug and said this (http://www.ageye.de/index.php?s=galarm/manual/limitations) is the issue.

[heweaver]

When I flashed to NATF v4.4 I had problems with the sliding answer window...so I followed his instructions to remove it. After I uninstalled it, I tested receiving a call and noticed it acting like what you are describing. I then installed his addon cab for the AT&T stock dialer, and it restored the answer window to what I was looking for.

If you search back a few pages, one of my earlier posts describes the entire process to get the stock dialer back on, which should have your answer windows you are missing. You have to make sure to set the phone to AIRPLANE mode and reset before installing or enabling the dialers... (it's all in my post, or you can find the instructions on the first page of this thread).

When I receive calls, all I get is the small windows mobile popup that I'm getting a call, no HTC slide2dial or anything. I've gotten S2U2 to work, but its sluggish sometimes. How can I fix this?

[heweaver]

I have been using v4.4 for over a week now, and haven't really had many issues... I removed the slide-2-answer dialer because I thought it was causing me to miss calls due to sluggish response times and restored back to the stock AT&T dialer that NATF has available as an addon cab... but over the past several days, I am beginning to think its just my phone now. Even after soft resetting (I've done this many times, and doesn't seem to act much better, even right after it boots up). When a call comes in, if I am staring at the phone, I can see the screen come on and the call box appear. It says UNKNOWN CALLER and has the answer / ignore boxes (and the send text button at the bottom). It stays like that for about 4 or 5 seconds, then it will switch over to the actual name or number of caller. I have my phone set to VIBE AND RING at the same time, but the problem is that for those four or five seconds, my callers are hearing it ring but my phone won't start vibrating or playing the song until it switches from UNKNOWN to the name or number. By that time, I may have time to hear one ring but almost always, I miss the call and have to call them back unless I happen to be watching it when the screen first lights up and be ready to hit ANSWER the moment I see their name or number appear.

Is there something I should or can do to try to speed up this process? If not, is there any way for me to increase the number of rings my callers would hear before it goes to voice mail to at least give myself a chance to reach it easier? Or is anyone else experiencing the same things?

Thanks!

[mingqlin]

I got my Fuze for about 2 week, first I installed NATF 4.3, it worked normally for a week, then i try defferent roms, and decided to stick with 4.4, but For last 6 days, my Fuze (with either NATF 4.3 or 4.4), every morning I wake up, it freeze as soon as I turn on my Fuze, after I soft reset, it show the screen of (prepare device for the first time use...) and the rest screens identical to the device has been Hard reset. Please help!!, I start to think my device have hardware defeat.

[dmnshaye]

I have been using v4.4 for over a week now, and haven't really had many issues... I removed the slide-2-answer dialer because I thought it was causing me to miss calls due to sluggish response times and restored back to the stock AT&T dialer that NATF has available as an addon cab... but over the past several days, I am beginning to think its just my phone now. Even after soft resetting (I've done this many times, and doesn't seem to act much better, even right after it boots up). When a call comes in, if I am staring at the phone, I can see the screen come on and the call box appear. It says UNKNOWN CALLER and has the answer / ignore boxes (and the send text button at the bottom). It stays like that for about 4 or 5 seconds, then it will switch over to the actual name or number of caller. I have my phone set to VIBE AND RING at the same time, but the problem is that for those four or five seconds, my callers are hearing it ring but my phone won't start vibrating or playing the song until it switches from UNKNOWN to the name or number. By that time, I may have time to hear one ring but almost always, I miss the call and have to call them back unless I happen to be watching it when the screen first lights up and be ready to hit ANSWER the moment I see their name or number appear.

Is there something I should or can do to try to speed up this process? If not, is there any way for me to increase the number of rings my callers would hear before it goes to voice mail to at least give myself a chance to reach it easier? Or is anyone else experiencing the same things?

Thanks!

I've been experiencing the same problem since NATF 4.3. I tested right after loading v4.4s without installing anything else and the same problem still existed. Under phone settings (call forwarding) you can extend the time before the call is sent to voice mail. However, if anyone has any fixes for this problem, I would appreciate it as well.

[njackowski]

[I love copy-n-paste... take THAT Apple! :D]

LOL. This is one of the many reasons why my iPhone is sitting in my desk drawer and I'm blissfully happy with my Fuze :)

[garyfunk]

I've been flashing this rom since like 2.x and use the alarm routinely. It has not worked since I flashed 4.4 either. Ironically this was also the first time I did a hard reset after flash. I haven't tried reflashing to verify it is really the ROM and not something else. I think I will try another alarm because I never really liked the Fuze alarm to begin with.

Some other issues I've had with this version that I didn't have with others: I can't Dismiss certain appointments using the softkey.

ETA:
I installed G-Alarm and it said I had a Windows Alarm bug and said this (http://www.ageye.de/index.php?s=galarm/manual/limitations) is the issue.

For what it is worth, I have run 4.4S and have three alarms set. They work 100%, I have NO alarm problems with the stock 4.4S.

[l3it3r]

Hardware versions perhaps? I have alarms set as well and they all work. In fact, I haven't seen any of the mentioned issues!

[galford316]

For what it's worth, I always had that very similar issue with my 8525. When I got my fuze, I skip the stock rom and went to 4.3 and now with 4.4. I uploaded a MP3,used the supplied MP3 trimmer, saved as my ring tone. I doubled checked the delay for ring to set at zero (i think is by default with NATF roms ). Set for Vibrate and ring setting.

The end result, long vibrate then my ring tone will occur. The number will show and the contact name if in my contacts. The contact picture takes .5 secs to show but sometimes 3/4 of secs to show. I believe this is due to the contact photo is stored on the storage card. I can slide to answer/ignore fairly quickly or even face down the fuze.

It works well , but I do have a fairly "stock" NATF 4.4 :). Not much customize stuff that loads into memory/ no themes/ or cosmetic changes.

I have not tried ignore/send text scenario yet.

As i type this, i am considering of moving my contact photos to the device to reduce the latency ( or so i would think )
I have been using v4.4 for over a week now, and haven't really had many issues... I removed the slide-2-answer dialer because I thought it was causing me to miss calls due to sluggish response times and restored back to the stock AT&T dialer that NATF has available as an addon cab... but over the past several days, I am beginning to think its just my phone now. Even after soft resetting (I've done this many times, and doesn't seem to act much better, even right after it boots up). When a call comes in, if I am staring at the phone, I can see the screen come on and the call box appear. It says UNKNOWN CALLER and has the answer / ignore boxes (and the send text button at the bottom). It stays like that for about 4 or 5 seconds, then it will switch over to the actual name or number of caller. I have my phone set to VIBE AND RING at the same time, but the problem is that for those four or five seconds, my callers are hearing it ring but my phone won't start vibrating or playing the song until it switches from UNKNOWN to the name or number. By that time, I may have time to hear one ring but almost always, I miss the call and have to call them back unless I happen to be watching it when the screen first lights up and be ready to hit ANSWER the moment I see their name or number appear.

Is there something I should or can do to try to speed up this process? If not, is there any way for me to increase the number of rings my callers would hear before it goes to voice mail to at least give myself a chance to reach it easier? Or is anyone else experiencing the same things?

Thanks!

[yarhokie]

I believe I have uncovered a possible regression in behavior between v4.2 and v4.4. Before with v4.2 I would get haptic feedback when I hit the unlock and confirm buttons to unlock the phone. In v4.4 this behaviour has disappeared. Has any one else noticed this. I liked the v4.2 behavior as it was I just love the haptic feedback. If I have a chance I may flash back to v4.2 to see if I can replicate the behavior again.

YarHokie

[metal450]

Hey NATF,

I'd imagine you're already aware of it, but just in case, they FINALLY released a version of Opera Mobile that supports Gears. It's still a beta and thus presumably has a bug or two - I haven't had a chance to test it myself - but definitely something to consider for the next version :)

http://labs.opera.com/news/2009/02/20/

[Bob Simons]

I'm using an unmodified NATF 4.4.

I'm not familiar with different dialer skins so I don't know if that's how to set this: is there an easy way to change the dialer behavior so I can go straight to the contacts on a previous call without having to go into the menus? My Garmin rom on my Tilt would show the name and pressing the send button would dial but selecting the entry would go straight into the contacts. This made it easy to try calling someone on an alternate number.

In effect, I'm looking for behavior similar to the Call History but with the keypad. Can this be done either with a registry change or a different dialer/skin?

If this question has been asked and answered, can someone tell me the search string that might have produced the answer? I didn't see it.

Thanks

[mike d 713]

thanks for the rom

[andrewstrauss]

I have been running NaTF's roms since the early days....but have always used the full pre-cooked versions. Today was my first major run through with the kitchen cooking my own custom version. It worked REALLY well and went quite smooth. Thanks soo much for posting such a good version of the kitchen that builds things just as expected. Now my ROM is EXACTLY how I want it. Thanks again.

[NotATreoFan]

I have been running NaTF's roms since the early days....but have always used the full pre-cooked versions. Today was my first major run through with the kitchen cooking my own custom version. It worked REALLY well and went quite smooth. Thanks soo much for posting such a good version of the kitchen that builds things just as expected. Now my ROM is EXACTLY how I want it. Thanks again.

I can't take credit for the kitchen itself... as the Command Prompt title says "Da_G mod"... I just add the files to it. :)

[FUZE_User]

Hey NATF & Fellow forum members
quick question, does the new AT&T ROM Work w/ NATF'S V 4.4?

Thanks,
FUZE_USER

[villa_bryan]

It's not the ROM it's the radio that came with it. I'm using NATF 4.4 with the new radio and AGPS enabled and I'm getting locks within 5 seconds everytime from within my house.

do u need to unlock to flash new radio?? In the instructions it says u don't, i just wanna be sure though. also does the new radio give u less battery?

[digitalmatrixio]

do u need to unlock to flash new radio?? In the instructions it says u don't, i just wanna be sure though. also does the new radio give u less battery?

As long as you are flashing a radio that is for the device it will be fine. For example it needs to be a Raphael/Fuze Radio. You wouldn't be able to use the 1.09.25.35 (Blackstone) like NATF uses unless you have the device security unlocked.

[villa_bryan]

the new att rom i think will be apart of 4.5 but u can only run one rom. if ur talking about the radio, i think someone said they already have it with this rom.

[garyfunk]

Hey NATF & Fellow forum members
quick question, does the new AT&T ROM Work w/ NATF'S V 4.4?

Thanks,
FUZE_USER

NATF's 4.5 ROM will be based on the new AT&T ROM that was just leaked. .

[TurboX2]

NATF's 4.5 ROM will be based on the new AT&T ROM that was just leaked. .

the rom has nothing to do with the radio, unless the radio is included with the rom, which would be a waste of webspace.

You can download the ATT rom that includes the radio, and then download the NATF rom that doesnt inlcude the radio- this will result in the NATF rom with the ATT radio.

[EverclearCrans]

Hello, Thanks for the great rom, i've been using it for a while now and it's super fast, can't wait for tf3d 2, I am wondering if anyone has noticed if during calls the person on the other end is having a hard time hearing you. Ever since I installed this rom people tell me it sounds like im echoing, and that they can hear way too much of the background. Also some people have even said that when I talk it sounds like I'm yelling at them even though I'm barely talking. Are there any fixes or settings for this? Thanks

[garyfunk]

the rom has nothing to do with the radio, unless the radio is included with the rom, which would be a waste of webspace.

You can download the ATT rom that includes the radio, and then download the NATF rom that doesnt inlcude the radio- this will result in the NATF rom with the ATT radio.

What is your point? I never said anything about any radio. Nor did the post I replied to.

[CR7KB24]

I just noticed that my keyboard is kinda messed up, it's like between the fuze keyboard and the touch pro keyboard, like when i press fn and then a number and sybol comes up instead of the numbers, i changed it via reg, but that didn't work :(

[xhypnotik]

Does Music ID requires it subscription? It used to work..

[F2a]

Does Music ID requires it subscription? It used to work..

Ok, in the top right click on "Search this thread" and then type "Music ID" (include the quotation marks) and hit search. If everyone searched I bet this entire thread would be readable.

[josbald1975]

Does Music ID requires it subscription? It used to work..

Yes, Music ID requires a subscription. it used to work because the version NATF installed by default had someones credentials in it without his knowledge. he was made aware of the situation and has yanked that version. so now you get a couple free ID's then you need to signup

[NotATreoFan]

I'm sorry to say that I will not be able to get a versions of 4.5 ready before I leave for Florida tonight. :( Last minute packing for the move and some other unexpected things prevented me from finishing all of the ROMs.

However, Verizon moved up the install date for FiOS in my mom's new apartment, so I will have a lightning-fast upload Monday afternoon. :)

[xhypnotik]

Ok, in the top right click on "Search this thread" and then type "Music ID" (include the quotation marks) and hit search. If everyone searched I bet this entire thread would be readable.

It's good to know there's [Mod Edit - language] like you out there!

:)

[xhypnotik]

Yes, Music ID requires a subscription. it used to work because the version NATF installed by default had someones credentials in it without his knowledge. he was made aware of the situation and has yanked that version. so now you get a couple free ID's then you need to signup

Oh, I see now. Thanks for clearing it up. :D

[garyfunk]

It's good to know there's [Mod Edit - Language] like you out there!

:)
That is not necessary. Your question has been asked and answered in this thread. All you have to do is read.

[CR7KB24]

Hey, Natf, I always mess around with rom during the weekend and I tried EnergyROM 2.1 beta, and it has these amazing soft key menus, I was thinking about staying on that rom but something about your roms just make me keep using them, I was wondering if you could get these new menus on your rom, Thanks;)

[simonsayz31]

I have researched and I cannot find the answer, Hopefully someone can help me.

I installed the latest NATF Rom 4.4. Everything installed correctly. Did a hard reset.

I can't connect to media net. With Opera and IE. It says it's forbidden. I tried everything I possibly could and had no luck so far. Connecting through wifi it works. I rolled it back to the NATF 4.2 version that I had previously before installing 4.4 and it still doesn't work. Any Ideas? It's with AT&T.

[NotATreoFan]

I'm leaving for my 20 hour drive to Florida now, so if you don't hear from me until Monday morning, please don't think I'm ignoring anyone...

[joelpro]

Ok so I have an ATT fuze, I unlocked it a while back so I could use it on Rogers.
That worked fine, but as usual there were still some things that were locked down to ATT, specifically Data, GPS, Opera and a few other programs.

So I loaded your Touch Pro 4.4 standard ROM. That worked beautifully and made my phone 100% compatible with Rogers network, but the keyboard layout was all wrong (which I mentioned a few paged back). You told me I needed to load the FUZE ROM to fix the keyboard issue.

So I loaded the FUZE 4.4 standard ROM which fixed the keyboard layout but now I seem to be back to square one with the Data network issues.
I guess what I'm looking for is a Touch pro ROM with a FUZE keyboard layout.

Any suggestions?
Thanks! :)

[StevePritchard]

Ok so I have an ATT fuze, I unlocked it a while back so I could use it on Rogers.
That worked fine, but as usual there were still some things that were locked down to ATT, specifically Data, GPS, Opera and a few other programs.

So I loaded your Touch Pro 4.4 standard ROM. That worked beautifully and made my phone 100% compatible with Rogers network, but the keyboard layout was all wrong (which I mentioned a few paged back). You told me I needed to load the FUZE ROM to fix the keyboard issue.

So I loaded the FUZE 4.4 standard ROM which fixed the keyboard layout but now I seem to be back to square one with the Data network issues.
I guess what I'm looking for is a Touch pro ROM with a FUZE keyboard layout.

Any suggestions?
Thanks! :)
Use the Touch ROM, and checkout tip #3 here ---> http://forum.xda-developers.com/showpost.php?p=2893892&postcount=3

Cheers,

Steve.

[bfspider]

I'm leaving for my 20 hour drive to Florida now, so if you don't hear from me until Monday morning, please don't think I'm ignoring anyone...

Drive safe!! :)

[garyfunk]

I'm leaving for my 20 hour drive to Florida now, so if you don't hear from me until Monday morning, please don't think I'm ignoring anyone...
I've left you 20 messages this morning. Why are you ignoring me?


;)


We all hope you have a safe trip and you have some fun. Try not to spend too many hours in he kitchen. Take a break and enjoy life.

[netguy45]

I got my Fuze for about 2 week, first I installed NATF 4.3, it worked normally for a week, then i try defferent roms, and decided to stick with 4.4, but For last 6 days, my Fuze (with either NATF 4.3 or 4.4), every morning I wake up, it freeze as soon as I turn on my Fuze, after I soft reset, it show the screen of (prepare device for the first time use...) and the rest screens identical to the device has been Hard reset. Please help!!, I start to think my device have hardware defeat.

For what it's worth I have been having similar problems. I installed 4.3 when it first came out and a few days later I woke up to find the Fuze frozen. I pressed the reset button on the bottom of the phone and when the phone booted up it was running the first time installer stuff like I just hard reset the phone. After going through the setup again everything on my phone was gone just like after a hard reset. A day or so later the same thing happened again. I then tried 4.4 when it came out thinking something had gone wrong with my 4.3 install but the same thing was happening on that. Then I flashed EnergyROM onto the phone and that is behaving the same. Today I woke up and saw that my clock on the phone didn't move forward an hour but everything else on the phone was working. I pressed the reset button on the bottom of the phone thinking a soft reset would fix the clock but when the phone booted back up it was at the initialization screen again like a hard reset was done.

I am in the process of trying to figure out if there is something I am installing that is causing this behavior. The hard reset seems to only happen to me when I just press the reset button on the bottom of the phone and usually pressing that reset button doesn't cause a problem but at random times at least once a week I get this hard reset problem. I have been doing the recommended hard reset after installing a new ROM. Since this problem is happening to me with different ROMs I don't think it is ROM specific.

I don't think this is the problem but the first time I installed a new ROM on my phone I used the ActiveSync method and never had this problem. Then I started using the install from SDCard technique and this hard reset problem has been happening. Again I don't think this is the problem but figured I would throw this out there since I am running out of ideas. I'll post back here if I figure out what is going on. I am going to install the ROM again on my phone and not install anything else onto it to see what happens. Also I am syncing my phone with a Vista 64 computer if that makes a difference.

[garyfunk]

For what it's worth I have been having similar problems. I installed 4.3 when it first came out and a few days later I woke up to find the Fuze frozen. I pressed the reset button on the bottom of the phone and when the phone booted up it was running the first time installer stuff like I just hard reset the phone. After going through the setup again everything on my phone was gone just like after a hard reset. A day or so later the same thing happened again. I then tried 4.4 when it came out thinking something had gone wrong with my 4.3 install but the same thing was happening on that. Then I flashed EnergyROM onto the phone and that is behaving the same. Today I woke up and saw that my clock on the phone didn't move forward an hour but everything else on the phone was working. I pressed the reset button on the bottom of the phone thinking a soft reset would fix the clock but when the phone booted back up it was at the initialization screen again like a hard reset was done.

I am in the process of trying to figure out if there is something I am installing that is causing this behavior. The hard reset seems to only happen to me when I just press the reset button on the bottom of the phone and usually pressing that reset button doesn't cause a problem but at random times at least once a week I get this hard reset problem. I have been doing the recommended hard reset after installing a new ROM. Since this problem is happening to me with different ROMs I don't think it is ROM specific.

I don't think this is the problem but the first time I installed a new ROM on my phone I used the ActiveSync method and never had this problem. Then I started using the install from SDCard technique and this hard reset problem has been happening. Again I don't think this is the problem but figured I would throw this out there since I am running out of ideas. I'll post back here if I figure out what is going on. I am going to install the ROM again on my phone and not install anything else onto it to see what happens. Also I am syncing my phone with a Vista 64 computer if that makes a difference.

Do you still have the RALPIMH.NBH file in the root of the SD Card? If so, move it out of the root and that may help.

[fuzion99]

Ok so I have an ATT fuze, I unlocked it a while back so I could use it on Rogers.
That worked fine, but as usual there were still some things that were locked down to ATT, specifically Data, GPS, Opera and a few other programs.

So I loaded your Touch Pro 4.4 standard ROM. That worked beautifully and made my phone 100% compatible with Rogers network, but the keyboard layout was all wrong (which I mentioned a few paged back). You told me I needed to load the FUZE ROM to fix the keyboard issue.

So I loaded the FUZE 4.4 standard ROM which fixed the keyboard layout but now I seem to be back to square one with the Data network issues.
I guess what I'm looking for is a Touch pro ROM with a FUZE keyboard layout.

Any suggestions?
Thanks! :)

I'm on Rogers also and have successfully flashed the Fuze Standard ROM's through various versions. After flashing the new ROM run the attached cab file which applies all the Rogers settings. Do a soft reset after.

[htcfan78]

Hey, Natf, I always mess around with rom during the weekend and I tried EnergyROM 2.1 beta, and it has these amazing soft key menus, I was thinking about staying on that rom but something about your roms just make me keep using them, I was wondering if you could get these new menus on your rom, Thanks;)

That is an app called FingerMenu, which can be found here (http://forum.xda-developers.com/showthread.php?t=459125).

[joelpro]

Use the Touch ROM, and checkout tip #3 here ---> http://forum.xda-developers.com/showpost.php?p=2893892&postcount=3

Cheers,

Steve.

I'm on Rogers also and have successfully flashed the Fuze Standard ROM's through various versions. After flashing the new ROM run the attached cab file which applies all the Rogers settings. Do a soft reset after.

Thanks guys!
I'll try them both and let you know which works best.

[CR7KB24]

That is an app called FingerMenu, which can be found here (http://forum.xda-developers.com/showthread.php?t=459125).

Yep, that was it, Thanks, this is the GREATEST rom ever! :D

[CR7KB24]

If anyone is intrested I just made a windows mobile 6.5 start icon for this rom :)

Just copy or move the file in the zip to the windows directory, if you already have a custom start icon add .bak to the old one then copy the file in.

[harpo1]

If anyone is intrested I just made a windows mobile 6.5 start icon for this rom :)

Just copy or move the file in the zip to the windows directory, if you already have a custom start icon add .bak to the old one then copy the file in.

What's the difference between this one and the one on NATF 4.4 Rom?

[garyfunk]

What's the difference between this one and the one on NATF 4.4 Rom?

Oh good. I am gald I am not the only one that "doesn't get it."

Now I get it. You want people to think you are running a non-release verison for Windows Mobile 6.5.

[Jdilla]

Oh good. I am gald I am not the only one that "doesn't get it."

The 4.4 one is in color and the one CR7KB24 has posted is black and white. according to the posted jpeg.... thats obvious though... i dont get it either

[CR7KB24]

Oh good. I am gald I am not the only one that "doesn't get it."

What's the difference between this one and the one on NATF 4.4 Rom?

It makes the start icon all white, like the one on the windows mobile 6.5 roms

[garyfunk]

It makes the start icon all white, like the one on the windows mobile 6.5 roms

What if I told you the reason it is white is so it can easily been noticed that it is a non-release version.

[CR7KB24]

What if I told you the reason it is white is so it can easily been noticed that it is a non-release version.

Well, ok, but I like it any ways better than the other one

[l3it3r]

I like it because it matches the rest of the black and white icons.

[joelpro]

I'm on Rogers also and have successfully flashed the Fuze Standard ROM's through various versions. After flashing the new ROM run the attached cab file which applies all the Rogers settings. Do a soft reset after.


Thanks for the suggestion but it didn't help much, still have some issues with data. And I can't use the included opera browser or GPS update.

[joelpro]

Use the Touch ROM, and checkout tip #3 here ---> http://forum.xda-developers.com/showpost.php?p=2893892&postcount=3

Cheers,

Steve.

Worked beautifully! Just what I needed.
Thanks again!

[HelterSkelter67]

off topic but kinda funny :}

[CR7KB24]

off topic but kinda funny :}

I laughed but only because it was really dumb :D

[bbianchi]

Is there something that I am doing wrong where in 4.4S most of the apps included in the ROM wont run? I cant find any crash logs but any new apps work fine, and all utilities work. I noticed the only games that work are Solitare and the Ball Maze, and it goes on like that for most all apps. With 4.5 around the corner I am more than willing to wait it out, but I was curious if I missed something?

[drugusv]

hi Natf thanks for your work, all is great, but, i have an issue: i am from Republic of Moldova (Central Europe), when i tried o change time settings to GMT +2 Athens, Istanbul and press ok, then i see the settings and time is cahnged automatically to GMT +2 Windhoek, and an another question: in >start\settings\connections\connection setup is list of countrys, in original last rom Moldova it is, but in yours is not, you are excluded Moldova and others European countrys? thanks

[telegraph0000]

Is it just me or is 4.4's Internet Explorer extremely laggy and lacking some important (to me) functions...???

[garyfunk]

The 4.4 one is in color and the one CR7KB24 has posted is black and white. according to the posted jpeg.... thats obvious though... i dont get it either

I finally got it. What he is calling the 'start icon' is really the 'Microsoft Windows logo' that when pressed, causes the Start menu to come up.

[bbianchi]

Is there something that I am doing wrong where in 4.4S most of the apps included in the ROM wont run? I cant find any crash logs but any new apps work fine, and all utilities work. I noticed the only games that work are Solitare and the Ball Maze, and it goes on like that for most all apps. With 4.5 around the corner I am more than willing to wait it out, but I was curious if I missed something?

Oddly enough this also happens to the Alarm when it goes off. There is no way to snooze or silence it unless I uncheck the occurrence that is causing it to go off.

[justinld50]

You probably flashed the Touch Pro Rom instead of the Fuze Rom. I'm pretty sure there's a cab to fix the keyboard layout but you'll have to do a search for it.


Here's the link for the fix.
http://forum.xda-developers.com/showthread.php?t=469450&highlight=keyboard+layout+cab&page=304


OK, I found a fix that fortunately did not require me to re-flash my phone:


use total commander to go to registry (\\Plugins folder when you're on the root directory) goto registry>HKLM\Hardware\DeviceMap\Keybd\ tap on add value, choose DWORD & write (CWSLayout) without brackets of course in the "New value #1" stead in green, press ok then in the next window write 1 in stead of zero in the value box, then ok. Soft reset and voila . . . u have the fuse keyboard.

[nextascy]

That is an app called FingerMenu, which can be found here (http://forum.xda-developers.com/showthread.php?t=459125).

The FingerMenu is an awesome cab, and make the menu system alot more usable. Maybe we can get this in the rom, hint hint. HAHA

[Royalmathmtcs]

The FingerMenu is an awesome cab, and make the menu system alot more usable. Maybe we can get this in the rom, hint hint. HAHA

It's called user customization. NATF makes all of his roms UC compatible, hint hint.

On a side note, maybe we can finally have A-GPS enabled phones! According to what users of the AT&T 5.08 rom are saying. :)

[garyfunk]

It's called user customization. NATF makes all of his roms UC compatible, hint hint.

On a side note, maybe we can finally have A-GPS enabled phones! According to what users of the AT&T 5.08 rom are saying. :)

If you look at the AGPS thread, and then look at your phone, you will see that the only key missing is APN, add that and you are good to go.

[nableezy]

If you look at the AGPS thread, and then look at your phone, you will see that the only key missing is APN, add that and you are good to go.
I think the AGPS package is different, though according to Da_G the gps drivers appear to be the same.

[garyfunk]

I think the AGPS package is different, though according to Da_G the gps drivers appear to be the same.

I think all you need to do is use the new radio.

[Royalmathmtcs]

I think all you need to do is use the new radio.

I assume you're talking about the 1.12.25.19 radio. I tried that one out and the battery life was miserable for me. GPS wise, it was about the same as 1.11.25.01, with a little less position lag. I've always been under the impression that A-GPS has not functioned correctly and have left it off. I did update the APN as Da_G instructed, and I don't think it's making a difference so far. How do you know when it's being utilized over regular gps?

[nextascy]

It's called user customization. NATF makes all of his roms UC compatible, hint hint.

On a side note, maybe we can finally have A-GPS enabled phones! According to what users of the AT&T 5.08 rom are saying. :)

While usually I would agree with you, things that usually make it into the ROM has no drawback and benefit everybody. Things that should be left out are preferences or nice to have. In this case, it doesn't change anything to the phone except add to 6.1 what it should have had, which is finger friendly menu selection, like TF3D. If you test use WM 6.5, you will see that Microsoft have made such changes. There's no learning curb involved. Such as other things NAFT have included, like Touch Response.

And yes, I can't wait for AGPS either, some of the result is amazing, like 15 seconds cold boot aquired time. Now we might actually have a usable GPS.

[diceman725]

Maybe a crazy question, but anyone know if the new display drivers can be uninstalled? The resolution is too good (read: small) and my eyes are too old.

[F2a]

I updated to the new radio and my AGPS is working great. It's a must if you use gps.

[kennyb123]

F2a isn't joking.



1.12.25.19 Radio + AGPS + NATF 4.4 = < 5 second GPS locks INDOORS for me.

Sick... and beautiful.

[digitalmatrixio]

Maybe a crazy question, but anyone know if the new display drivers can be uninstalled? The resolution is too good (read: small) and my eyes are too old.

For starters you may with to try out:
Revert Programs and Settings menus to 3 icons per row - Rapidshare Direct Download - http://rapidshare.com/files/166798092/NATF_Revert_to_3_Icons.cab (http://rapidshare.com/files/166798092/NATF_Revert_to_3_Icons.cab) (from first page of topic)
You could also go to Start, Settings, System, Screen, Text size and make that larger.
What else appears too small for you?

[l3it3r]

F2a isn't joking.



1.12.25.19 Radio + AGPS + NATF 4.4 = < 5 second GPS locks INDOORS for me.

Sick... and beautiful.

Nice, I'll have to try that out.

[khanfuze]

Where do I get the new radio?

is this it?
http://forum.xda-developers.com/showpost.php?p=3400754&postcount=1


Edit: I just want the radio. I already use NATF 4.4

[DrunkenOstrich]

F2a isn't joking.



1.12.25.19 Radio + AGPS + NATF 4.4 = < 5 second GPS locks INDOORS for me.

Sick... and beautiful.

Awesome. My Nokia E71 can do that to, first time I tried I was like WTF, my Fuze can't do that!

I'll have to give this radio a go. I heard it sucks batteries like a mofo tho.

[kk0813]

Awesome. My Nokia E71 can do that to, first time I tried I was like WTF, my Fuze can't do that!

I'll have to give this radio a go. I heard it sucks batteries like a mofo tho.

For me getting GPS fix after soft reset is just 15 seconds but the battery seems going little faster. With the previous stock radio battery was very good and gps was about 2 minutes or more after soft reset. GPS lag is still there in both the versions (no improvement in gps lag).

[dmnshaye]

Awesome. My Nokia E71 can do that to, first time I tried I was like WTF, my Fuze can't do that!

I'll have to give this radio a go. I heard it sucks batteries like a mofo tho.

I can confirm that the GPS is incredible fast <10 seconds every time. I'm getting better battery life, but it does seem to be hit or miss for everyone.

[clavace]

F2a isn't joking.



1.12.25.19 Radio + AGPS + NATF 4.4 = < 5 second GPS locks INDOORS for me.

Sick... and beautiful.

I just loaded 1.12.25.19 and I confirm a much faster GPS lock.:D

I will be driving around town today and will check to see if I get better voice reception in problem areas as well as battery life.

[mindfrost82]

@NATF: I know you removed the HD Contacts version of TF3D because it made everything lag. I'm not sure if you're working on a v4.5 ROM or not, but you could try a suggestion in this (http://forum.xda-developers.com/showthread.php?t=489472) thread, which is to set the attributes to hidden for all of the manila files.

It might be worth a shot if you wanted to try adding this back in.

[garyfunk]

@NATF: I know you removed the HD Contacts version of TF3D because it made everything lag. I'm not sure if you're working on a v4.5 ROM or not, but you could try a suggestion in this (http://forum.xda-developers.com/showthread.php?t=489472) thread, which is to set the attributes to hidden for all of the manila files.

It might be worth a shot if you wanted to try adding this back in.

That is an interesting idea. Maybe he could do that for 4.6. Since 4.5 is based on a new ROM, my hopes are that NATF will do minimal enhancements for 4.5 and put out a really stable ROM.

[kennyb123]

Awesome. My Nokia E71 can do that to, first time I tried I was like WTF, my Fuze can't do that!

I'll have to give this radio a go. I heard it sucks batteries like a mofo tho.

No, it doesn't suck batteries like a mofo for me at all.

Make sure you use the .cab install file that replaces the rilphone.dll file to match the new radio. I've attached it here.

P.S. Yes, you will still have 2-3 second GPS lag. That has not been resolved. That may never be resolved. I can get over it, though.

[JoeTheFro]

No, it doesn't suck batteries like a mofo for me at all.

Make sure you use the .cab install file that replaces the rilphone.dll file to match the new radio. I've attached it here.

P.S. Yes, you will still have 2-3 second GPS lag. That has not been resolved. That may never be resolved. I can get over it, though.

Thanks for reposting the rilphone file, i couldnt find it anywhere.

[Red5]

No, it doesn't suck batteries like a mofo for me at all.

Make sure you use the .cab install file that replaces the rilphone.dll file to match the new radio. I've attached it here.

P.S. Yes, you will still have 2-3 second GPS lag. That has not been resolved. That may never be resolved. I can get over it, though.Whoa, does this cab work for any ROM, or just NATF ROMs?

[JoeTheFro]

Whoa, does this cab work for any ROM, or just NATF ROMs?

This is the same cab i posted on page 299. It works for any ROM. It just replaces the rilphone.dll file with the one that is intended for the 1.12.25.19 radio.

[Red5]

This is the same cab i posted on page 299. It works for any ROM. It just replaces the rilphone.dll file with the one that is intended for the 1.12.25.19 radio.Hmm, Im wondering why this cab has not been posted in the radio thread at the top of this forum since they have been looking for an easy answer to get the new rilphone.dll file without having to flash a new ROM.

[mindfrost82]

This is the same cab i posted on page 299. It works for any ROM. It just replaces the rilphone.dll file with the one that is intended for the 1.12.25.19 radio.
You sure it works on non-patched ROMs?

[nableezy]

You sure it works on non-patched ROMs?
It will not, the ROM must have a patched NK.exe for this to work, if not the phone will stay in Airplane mode.

[Red5]

It will not, the ROM must have a patched NK.exe for this to work, if not the phone will stay in Airplane mode.Aha! Thats why I asked before I tried to install it. Thanks.

[JoeTheFro]

It will not, the ROM must have a patched NK.exe for this to work, if not the phone will stay in Airplane mode.

Yah, thanks for jogging my memory. Any ROM with a patched NK.exe will work with this CAB. Pesky NK...

Most custom ROMs have the patched NK these days, but it doesnt hurt to ask ROM creator first.

Side thought... If this radio was ripped from the new ATT ROM, does that mean the new ROM has a proper NK file designed for this radio/rilphone or is ATT using a patched NK as well... Or does a patched NK just allow you to swap out the file without the file needing to be cooked in...

[mindfrost82]

Yah, thanks for jogging my memory. Any ROM with a patched NK.exe will work with this CAB. Pesky NK...

Most custom ROMs have the patched NK these days, but it doesnt hurt to ask ROM creator first.

Side thought... If this radio was ripped from the new ATT ROM, does that mean the new ROM has a proper NK file designed for this radio/rilphone or is ATT using a patched NK as well... Or does a patched NK just allow you to swap out the file without the file needing to be cooked in...
I believe a patched NK just allows you to swap out the file. Da_G would have more info on this for sure.

[drtreo77]

I love NATFs ROM and am using 4.4 but I can not install the windows patch to fix the outgoing email problem from outlook. This is partly b/c the version of the 6.1 used in the build of the ROM I think. Has any body else figured a way around this yet. The last ROM I was able to send email was NATF 2.3 after I installed the windows patch cab. Any help would be appreciated.:confused:

[xhypnotik]

Can I change the manilla to the

Newer Manila w/ HD Contacts from pfcsabre from 4.3 ?

I just upgraded 4.3 to 4.4

[togles]

I installed the HTCAPI.dll that came with the Diamond Hologram program.
It caused the TouchFlo 3D not to work anymore, so when my phone boots, it says tap the screen to launch touchflo 3D but it will never launch.

Can someone email me the original dll file that came with the 4.4 rom? I dont know how else to recover from this other than to reload the ROM again.

Thanks,

Todd

[Hagow]

This is agreat ROM!

I am in Canada using a Fuze on the Rogers network.

I flashed it to v4.4 and installed the two files to remove proxy from Opera Mobile and CWS. The problem is that Youtube does not work when I am using Opera Mobile to go straight to the youtube site. It worked once then it stopped working.

Anyway to fiz this I tried the search but really did everything possible. Thanks. Love the Fuze btw!!!

[ryan6603]

Can I change the manilla to the

Newer Manila w/ HD Contacts from pfcsabre from 4.3 ?

I just upgraded 4.3 to 4.4


check out the change log post pg1. don't know if it's the same but there were issues with the HD contacts.

[netguy45]

Do you still have the RALPIMH.NBH file in the root of the SD Card? If so, move it out of the root and that may help.

No I actually use a separate dedicated SD card just for flashing ROMs so the RALPIMH.NBH file is no where on my phone. Since I reflashed my phone using the ActiveSync method again the problem hasn't come back. So far I am running with just the stock apps that came with the ROM with the exception of installing Keepass. I just bluetooth paired my phone up with my car today so that is something new I have added to the mix.

[xhypnotik]

check out the change log post pg1. don't know if it's the same but there were issues with the HD contacts.

Yeah I saw that.

"Rolled back to older Manila build due to lag issues with HD Contacts version."

It was really good. I don't really like the old manila (no offense, NATF is the best lol imo) because on the Settings and Programs tab, it tends to ummm I'm not sure how to say this but it overlays it.

[uncled1023]

Hey, i flashed this rom no problem, and im loving it. But i have noticed a bug, dont know if this has been said before, but i dont think so from what ive read.

All the up/down scroll bars dont work. not with the stylus, or with your finger. whenever you try to use the scroll bar, it always just exits the drop down, or just doesnt do anything.

Also, when you press and drag, to scroll up, and let go, it shoots up really fast, and doesnt stop unless you eatehr touch it again, or reaches the end. This can be really anoying when i am scrolliung through a list, and then it zooms to the end really fast.

If you already have fixes for these problems, could you please post them, but if not, it would be amazing if you could see if there is any way you could fix these bugs. Thanks.

[garyfunk]

Hey, i flashed this rom no problem, and im loving it. But i have noticed a bug, dont know if this has been said before, but i dont think so from what ive read.

All the up/down scroll bars dont work. not with the stylus, or with your finger. whenever you try to use the scroll bar, it always just exits the drop down, or just doesnt do anything.

Also, when you press and drag, to scroll up, and let go, it shoots up really fast, and doesnt stop unless you eatehr touch it again, or reaches the end. This can be really anoying when i am scrolliung through a list, and then it zooms to the end really fast.

If you already have fixes for these problems, could you please post them, but if not, it would be amazing if you could see if there is any way you could fix these bugs. Thanks.

I think you are the only one with those problems.

[DrzNight]

I installed the HTCAPI.dll that came with the Diamond Hologram program.
It caused the TouchFlo 3D not to work anymore, so when my phone boots, it says tap the screen to launch touchflo 3D but it will never launch.

Can someone email me the original dll file that came with the 4.4 rom? I dont know how else to recover from this other than to reload the ROM again.

Thanks,

Todd
Here ya go...

[uncled1023]

yea.. i figured it out. i just had to re-align the screen. Thanks for your help though.

[taterace]

I recently bought an At&t HTC Fuze from a private seller. They directed me to this site to flash the rom, to restore default settings.

I downloaded:
[Feb 24th - v4.4] - Password: NATF v4 Series
| Direct Link | Rapidshare | HTC Fuze v4.4 Standard

I love how it navigates and it worked great up until this mornig. Screen started acting up so I powered it off and back on. Now the HTC TouchFlo isn't working. It is stuck on that screen when powering up. It says "Tap Here to launch"...never starts from here.

I'm admittedly WAY out of my league with this. What do I do??

Thanks!!!

[nextascy]

I recently bought an At&t HTC Fuze from a private seller. They directed me to this site to flash the rom, to restore default settings.

I downloaded:
[Feb 24th - v4.4] - Password: NATF v4 Series
| Direct Link | Rapidshare | HTC Fuze v4.4 Standard

I love how it navigates and it worked great up until this mornig. Screen started acting up so I powered it off and back on. Now the HTC TouchFlo isn't working. It is stuck on that screen when powering up. It says "Tap Here to launch"...never starts from here.

I'm admittedly WAY out of my league with this. What do I do??

Thanks!!!

Click on the Start button, Setting, System tab, Clear Storage, type in 1234

After that, see if it works. If not, reflash, and Clear Storage again.

Good luck.

[At0mAng]

I recently bought an At&t HTC Fuze from a private seller. They directed me to this site to flash the rom, to restore default settings.

I downloaded:
[Feb 24th - v4.4] - Password: NATF v4 Series
| Direct Link | Rapidshare | HTC Fuze v4.4 Standard

I love how it navigates and it worked great up until this mornig. Screen started acting up so I powered it off and back on. Now the HTC TouchFlo isn't working. It is stuck on that screen when powering up. It says "Tap Here to launch"...never starts from here.

I'm admittedly WAY out of my league with this. What do I do??

Thanks!!!

Did you install anything? Sounds like a corrupted manila file.
Try a soft reset, if that does not work then try a hard reset.
If all else fails I would download the latest official AT&T Fuze ROM and restore everything to the way it was shipped and see if fixes the problem.

[DrunkenOstrich]

Did you install anything? Sounds like a corrupted manila file.
Try a soft reset, if that does not work then try a hard reset.
If all else fails I would download the latest official AT&T Fuze ROM and restore everything to the way it was shipped and see if fixes the problem.

+1, hard reset most likely.

To do this, hold Vol Down & Enter (center d-pad), while holding them both down, do a soft reset with the stylus, then hold those two buttons until you get the reset screen. When the reset screen comes up, release the buttons and follow the prompt (press Vol Up to reset).

You mentioned that you are way over your head, I suggest reading through the Wiki's and HOWTO threads, stickies, etc on this site. There is a lot of info, but after a few threads you'll get the gist of the basics.

Flashing ROMs is not something to do without having a good grasp on what your'e doing, you can easily make your device into a paper weight!

[bpm2000]

That radio doesnt work as well as the previous .25 blackstone i was using, and it sucks battery life a bit faster (Seattle here). I dont get reception at the mountains like i was getting with .25 too.

I'll reserve final judgement for 4.5 with the radio however, but for myself 4.4 works better with other radios in my region.

[stile@thecaverns.net]

After Flashing ROM with Natf's 4.4 version, the screen will no longer auto rotate on my HTC Fuze. I would really like this back.

Can anyone tell me what I need to do, to make it auto rotate? I cannot find anything in any of the configuration programs.

[ronj1986]

:confused:I loaded rom v4.3 and now my phone won't fully load. It will stay on for 5 secs, then power off saying the battery is low and the device will turn off. I cant reload a rom, because it won't stay on long enough. any ideas or advice? Tell me its not BRICKED!!!!:confused:

[nextascy]

:confused:I loaded rom v4.3 and now my phone won't fully load. It will stay on for 5 secs, then power off saying the battery is low and the device will turn off. I cant reload a rom, because it won't stay on long enough. any ideas or advice? Tell me its not BRICKED!!!!:confused:

Your battery might be bad, or your flash might have went bad. Try flashing with the AC adapter plug in, with/without batter inside. Copy the rom onto SD card, make sure rom is name RAPHIMG.nbh (I think), turn on your device with the volume up press down. See if that works for you.

You are flashing it to a GSM version of the Touch pro/Fuze , right?

[nextascy]

After Flashing ROM with Natf's 4.4 version, the screen will no longer auto rotate on my HTC Fuze. I would really like this back.

Can anyone tell me what I need to do, to make it auto rotate? I cannot find anything in any of the configuration programs.

If you flash from stock rom, auto rotate is not included in any of NAFT custom rom. You will need to go to the Software section, and look for a program that will fit your need, one that comes to mind is Gyrator, but there are others in that section that works great too.

[stile@thecaverns.net]

Thank you. I will check into some software. It did auto rotate, before the rom Flash though :confused:

[fuze_freak]

When I falsh my fuze from original rom to v4.4 rom i dont see the 3g on the top. I was wondering if the H is the same speed as the 3g or if is the same only with a H???
can someone explain to me please...

[ronj1986]

i have tried those. I did with ac charger and another fuze battery. Neither worked

[thericeman]

When I falsh my fuze from original rom to v4.4 rom i dont see the 3g on the top. I was wondering if the H is the same speed as the 3g or if is the same only with a H???
can someone explain to me please...

HSDPA, shown as H on your status bar at the top, is a 3G standard for high speed data transmission that AT&T uses. In the stock ROM, they use the generic 3G label. There's a whole mess of info you can get into when talking cell phone bands and such - if you're really interestested do a search for EDGE, 3G, HSDPA, HSPA/UMTS, and/or HSUPA, on your engine of choice. In short, H means you are connected to the fastest cell network speed the Fuze supports.

[ronj1986]

I've finally gotten somewhere. It lights up like its charging, but now I'm stuck on the align screen. I've soft reset numerous times, but it only goes as far as the aligh screen. Can't sync to computer to reflash and can't flash from card b/c the volume button is doing nothing.:eek:

PS. the align screen keeps repeating once I align it. Thats as far as it will go.

[fuze_freak]

HSDPA, shown as H on your status bar at the top, is a 3G standard for high speed data transmission that AT&T uses. In the stock ROM, they use the generic 3G label. There's a whole mess of info you can get into when talking cell phone bands and such - if you're really interestested do a search for EDGE, 3G, HSDPA, HSPA/UMTS, and/or HSUPA, on your engine of choice. In short, H means you are connected to the fastest cell network speed the Fuze supports.

Ohh Many Thanks for the info Thericeman

[RxS2K]

I've finally gotten somewhere. It lights up like its charging, but now I'm stuck on the align screen. I've soft reset numerous times, but it only goes as far as the aligh screen. Can't sync to computer to reflash and can't flash from card b/c the volume button is doing nothing.:eek:

PS. the align screen keeps repeating once I align it. Thats as far as it will go.

Ron,

First copy over the nbh file to your sd card and call it RAPHIMG.nbh. (Take out the card and put it in your PC) Make sure the file is in the Root of the SD card. (not in any other folder)
Next, put the sd card back in.
Take out your battery and plug the phone in.
Place the phone in bootloader mode by holding the volume down key and pressing the power button.
The phone should find the rom image and let you flash it over.

PM me if you need more help.

[villa_bryan]

Hey, I have problems syncing my contacts. I am running office 2007 and NATF 4.3. I am not sure what to do. i've looked through settings, and can't find a reason.

[thericeman]

Hey, I have problems syncing my contacts. I am running office 2007 and NATF 4.3. I am not sure what to do. i've looked through settings, and can't find a reason.

Hmmm... I'm using Office 2007 and haven't had contact problems with either 4.3 or 4.4. The only thing I might suggest, if you've already verified that you have your options set correctly in ActiveSync, is to disconnect the Fuze from your PC, delete the mobile device from ActiveSync, and reconnect the Fuze. It shouldn't be necessary, but it probably wouldn't hurt to make sure your apps are closed (on both the phone and the PC) before reconnecting the phone, too.

[darwinmach]

Yeah I saw that.

"Rolled back to older Manila build due to lag issues with HD Contacts version."

It was really good. I don't really like the old manila (no offense, NATF is the best lol imo) because on the Settings and Programs tab, it tends to ummm I'm not sure how to say this but it overlays it.

Try the restore curtains CAB: http://rapidshare.com/files/176503392/NATF_Restore_Curtains.cab

Post #4, NATF Custom CABs

[villa_bryan]

I tried that. What i have noticed thous is that when i go to the activesync options on my phone, that the list that shows what will synchronize does not have contacts checked. in fact it won't let me check off the contacts.

[villa_bryan]

I just flashed to the 4.4 and still my contacts will not sync. In active sync it shows a check mark, but nothing actually syncs.

[wczaja]

hi
i just flashed to 4.3 , for now looks good, it sync , i need more time to make a test another things

[villa_bryan]

K so I decided to start all over. I uninstalled office and activesync. I reinstalled them, downloaded sp1 for office. Imported my contacts. This time when I went to options I noticed that although contacts was displaying on the list when syncing it wasn't checked in the options. (wierd because before it was) Anyways, there was also another contacts option at the bottom that was unclickable, I'm assuming windows has some sort of contacts with out office. Whatever, the top one was outlook it worked, I'm happy.

[vicster]

hey folks. trying to search XDA and this thread, haven't turned up any solution to changeing the hardware keyboard, to nordic (needing the specifik danish chars, Æ-Ø-Å) wich are present with the FN-keys, but doesn't work with the v4.4, could someone throw me a bone =) thanks in advance.

[NotATreoFan]

Hey guys... I'm sooo sorry I haven't been online since Saturday afternoon. Things haven't been going so good here in Florida.

A) My phone fell out of the RV while stopping at a Rest Area in North Carolina. It's currently broken. :(
B) FiOS was installed on-time, but there was a delay getting into the apartment, so I'm just now getting an internet connection.


I'm not sure if AT&T will cover my Fuze under warranty, but since the phone is all broken on the inside, and looks almost new on the outside, I should be able to get it replaced.


I haven't had a chance to read the thread yet, but I wanted to give everyone an update as to why you haven't heard from me.

[mindfrost82]

Hey guys... I'm sooo sorry I haven't been online since Saturday afternoon. Things haven't been going so good here in Florida.

A) My phone fell out of the RV while stopping at a Rest Area in North Carolina. It's currently broken. :(
B) FiOS was installed on-time, but there was a delay getting into the apartment, so I'm just now getting an internet connection.


I'm not sure if AT&T will cover my Fuze under warranty, but since the phone is all broken on the inside, and looks almost new on the outside, I should be able to get it replaced.


I haven't had a chance to read the thread yet, but I wanted to give everyone an update as to why you haven't heard from me.
That really sucks!!!! Sorry about your phone!

It took me a while to get internet when I moved into new construction, so I know how that goes. Even when I did get it, all I can get is crappy 3mbps Verizon DSL, I can't even get cable!

[PDADoc]

Hey guys... I'm sooo sorry I haven't been online since Saturday afternoon. Things haven't been going so good here in Florida.

A) My phone fell out of the RV while stopping at a Rest Area in North Carolina. It's currently broken. :(
B) FiOS was installed on-time, but there was a delay getting into the apartment, so I'm just now getting an internet connection.


I'm not sure if AT&T will cover my Fuze under warranty, but since the phone is all broken on the inside, and looks almost new on the outside, I should be able to get it replaced.


I haven't had a chance to read the thread yet, but I wanted to give everyone an update as to why you haven't heard from me.

I have a short-term solution for you:

I have an extra FUZE sitting in my desk drawer that I would be more than happy to loan you for your work, and you can simply send it back to me when you get your replacement.

If this is something that you might be amenable to, PM me and we'll work out the details.

[NotATreoFan]

I have a short-term solution for you:

I have an extra FUZE sitting in my desk drawer that I would be more than happy to loan you for your work, and you can simply send it back to me when you get your replacement.

If this is something that you might be amenable to, PM me and we'll work out the details.

Thank you for the offer. I'll shoot you a PM later today. I'm heading to an AT&T store here in Largo to see about getting an on-the-spot replacement.

[PDADoc]

Thank you for the offer. I'll shoot you a PM later today. I'm heading to an AT&T store here in Largo to see about getting an on-the-spot replacement.

No problem, I'll wait to hear from you.

Good luck, and sorry for your trouble.

[thericeman]

Things haven't been going so good here in Florida.

A) My phone fell out of the RV while stopping at a Rest Area in North Carolina. It's currently broken. :(

Sounds like you could use a vacation! ;)

Keep us updated on your phone - there are folks here plugged into at&t mgmt that can help you if you run into any problems.

[ronj1986]

Tried to sync. it says 'the update utility can not open the requested file. Please check your update utility" What can I do now? I have tried 2 different roms and hard spl, same thing.

I have flashed via acivesync & microsd. Both were successful, but the farthest it will go is the align screen. it still seems as if volume down isn't working for a hard reset. What is the link to download a stock att rom? I'm going to try 2 send this one back.

[RxS2K]

Tried to sync. it says 'the update utility can not open the requested file. Please check your update utility" What can I do now? I have tried 2 different roms and hard spl, same thing.

I have flashed via acivesync & microsd. Both were successful, but the farthest it will go is the align screen. it still seems as if volume down isn't working for a hard reset. What is the link to download a stock att rom? I'm going to try 2 send this one back.


Ron,

Here is a link to the shipped rom for the fuze. I searched the wiki and found it for you.

http://forum.xda-developers.com/showthread.php?t=439346

[pbratton]

I've poked around and have found no notes on this...

I've noticed that there is no audible alert given when a call comes in while you are on the phone. I'd be certain that there is a switch somewhere for this.

Anyone have some hints?

[thericeman]

I've poked around and have found no notes on this...

I've noticed that there is no audible alert given when a call comes in while you are on the phone. I'd be certain that there is a switch somewhere for this.

Anyone have some hints?

You should have the visible alert with the dialer and an audible alert through the phone/earpiece/bluetooth. Make sure that you have call waiting notification turned on. Go into Start -> Settings -> Personal tab -> Phone -> Services tab. Select "Call Waiting" and click "Get Settings". Wait for it to retrieve from the network, then ensure that the "Notify me" radio button is selected. If it already is, select "Do not notify me" click OK. Go all the way out to the Personal Tab menu, go back into phone and re-enable it.

[thericeman]

I have flashed via acivesync & microsd. Both were successful, but the farthest it will go is the align screen. it still seems as if volume down isn't working for a hard reset. What is the link to download a stock att rom? I'm going to try 2 send this one back.

It may be that you're not hard resetting correctly?
http://forum.xda-developers.com/showthread.php?t=448008
Section 4, step 5 for hard reset: "Once phone finishes flashing and gets to the screen where it configures the stylus, HARD RESET (hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)"

[nextascy]

Tried to sync. it says 'the update utility can not open the requested file. Please check your update utility" What can I do now? I have tried 2 different roms and hard spl, same thing.

I have flashed via acivesync & microsd. Both were successful, but the farthest it will go is the align screen. it still seems as if volume down isn't working for a hard reset. What is the link to download a stock att rom? I'm going to try 2 send this one back.

It's not just volume down you have to hold, it's volume down+the center button before hitting the reset button.

[pbratton]

You should have the visible alert with the dialer and an audible alert through the phone/earpiece/bluetooth. Make sure that you have call waiting notification turned on. Go into Start -> Settings -> Personal tab -> Phone -> Services tab. Select "Call Waiting" and click "Get Settings". Wait for it to retrieve from the network, then ensure that the "Notify me" radio button is selected. If it already is, select "Do not notify me" click OK. Go all the way out to the Personal Tab menu, go back into phone and re-enable it.

Thanks RiceMan, but it was already set. I get a visual on screen, but no audible, so if I'm not staring at the screen when a call comes it while I'm on the phone, I never know about it...

[htcfan78]

Hey guys... I'm sooo sorry I haven't been online since Saturday afternoon. Things haven't been going so good here in Florida.

A) My phone fell out of the RV while stopping at a Rest Area in North Carolina. It's currently broken. :(
B) FiOS was installed on-time, but there was a delay getting into the apartment, so I'm just now getting an internet connection.


I'm not sure if AT&T will cover my Fuze under warranty, but since the phone is all broken on the inside, and looks almost new on the outside, I should be able to get it replaced.


I haven't had a chance to read the thread yet, but I wanted to give everyone an update as to why you haven't heard from me.

I just got an insurance replacement for my FUZE, and they shipped me a brand new one. The operator said that they are currently out of refurbished ones. If you are going to go the insurance route, now would probably be a good time.

[At0mAng]

Thanks RiceMan, but it was already set. I get a visual on screen, but no audible, so if I'm not staring at the screen when a call comes it while I'm on the phone, I never know about it...

Download the attached zip file, extract the files and copy them to your windows folder on the phone. See if that helps.

[pbratton]

Download the attached zip file, extract the files and copy them to your windows folder on the phone. See if that helps.

I'll give it a shot!

Thanks.

Add: Those files are already in the Windows folder...

[mtlcafan79]

Thank you for the offer. I'll shoot you a PM later today. I'm heading to an AT&T store here in Largo to see about getting an on-the-spot replacement.

My local store and warranty support both told me I was SOL on getting mine replaced for pretty much any reason outside of 30 days. All they could offer was a new one for $440.

[garyfunk]

My local store and warranty support both told me I was SOL on getting mine replaced for pretty much any reason outside of 30 days. All they could offer was a new one for $440.

There is a one year warrenty on the phone. I just had a Tilt replaced that I bought April 2008. I walked in with a dead one and walked out with a working unit in 15 minutes.

[l3it3r]

new one for $440?! I paid $380 for mine brand new no contract.

Edit: Where's NATF and his 'superfast FiOS' connection? I need my 4.5 :)

[NFRCER]

new one for $440?! I paid $380 for mine brand new no contract.

Edit: Where's NATF and his 'superfast FiOS' connection? I need my 4.5 :)

Righ here \/ \/

Hey guys... I'm sooo sorry I haven't been online since Saturday afternoon. Things haven't been going so good here in Florida.

A) My phone fell out of the RV while stopping at a Rest Area in North Carolina. It's currently broken. :(
B) FiOS was installed on-time, but there was a delay getting into the apartment, so I'm just now getting an internet connection.


I'm not sure if AT&T will cover my Fuze under warranty, but since the phone is all broken on the inside, and looks almost new on the outside, I should be able to get it replaced.


I haven't had a chance to read the thread yet, but I wanted to give everyone an update as to why you haven't heard from me.

[garyfunk]

new one for $440?! I paid $380 for mine brand new no contract.

Edit: Where's NATF and his 'superfast FiOS' connection? I need my 4.5 :)

He is in Florida with no way to test his ROM.

[clavace]

There is a one year warrenty on the phone. I just had a Tilt replaced that I bought April 2008. I walked in with a dead one and walked out with a working unit in 15 minutes.

I also had a Tilt (sold) that broke 14 months after purchase. It was out of AT&T warranty which is for 12 months but...

Still in HTC warranty which runs for 18 months - repair not replace. I did not even need receipt they looked it up with the serial number (under battery). I believe same might be true with Fuze but anyone requiring service will need to check with HTC customer service.

Anyone requiring service do not forget to put back to stock ROM & radio before sending in.

NOTE: HTC repair was very good but took about 3 weeks. I am business customer and AT&T sent me a free cheap phone to use (even sent overnight) while mine was being repaired - I still have as backup.

[AskTheAdmiN]

It's not just volume down you have to hold, it's volume down+the center button before power up.

I have been entering bootloader by just holding the volume down and rebooting. Even had a few users accidentialy enter it when powering on the phone (fat fingers)

:)

[silenthatred]

I'll give it a shot!

Thanks.

Add: Those files are already in the Windows folder...

Did you try disabling call waiting, saving the settings and re-enabling it?

[LCBrewing]

For what it's worth I have been having similar problems. I installed 4.3 when it first came out and a few days later I woke up to find the Fuze frozen. I pressed the reset button on the bottom of the phone and when the phone booted up it was running the first time installer stuff like I just hard reset the phone. After going through the setup again everything on my phone was gone just like after a hard reset. A day or so later the same thing happened again. I then tried 4.4 when it came out thinking something had gone wrong with my 4.3 install but the same thing was happening on that. Then I flashed EnergyROM onto the phone and that is behaving the same. Today I woke up and saw that my clock on the phone didn't move forward an hour but everything else on the phone was working. I pressed the reset button on the bottom of the phone thinking a soft reset would fix the clock but when the phone booted back up it was at the initialization screen again like a hard reset was done.

I am in the process of trying to figure out if there is something I am installing that is causing this behavior. The hard reset seems to only happen to me when I just press the reset button on the bottom of the phone and usually pressing that reset button doesn't cause a problem but at random times at least once a week I get this hard reset problem. I have been doing the recommended hard reset after installing a new ROM. Since this problem is happening to me with different ROMs I don't think it is ROM specific.

I don't think this is the problem but the first time I installed a new ROM on my phone I used the ActiveSync method and never had this problem. Then I started using the install from SDCard technique and this hard reset problem has been happening. Again I don't think this is the problem but figured I would throw this out there since I am running out of ideas. I'll post back here if I figure out what is going on. I am going to install the ROM again on my phone and not install anything else onto it to see what happens. Also I am syncing my phone with a Vista 64 computer if that makes a difference.

Did you ever find a solution to this? I just recently did the following (yesterday):
1) switched to the newest Raphael radio 1.12.25.19
2) test drove NRG 2.0 3/12/09 build (looking for the new Manila)
3) experienced about 7 random hard resets in 5 or so hours
4) switched back to NATF this morning (now 4.4 from what I was running 2.2 until yesterday)
5) had three random hard resets in about 4 hours.

I'm thinking it may be the radio, so I'm going back to stock ROM right now, and then going to go back to NATF and see if it all works out.

[netguy45]

Did you ever find a solution to this? I just recently did the following (yesterday):
1) switched to the newest Raphael radio 1.12.25.19
2) test drove NRG 2.0 3/12/09 build (looking for the new Manila)
3) experienced about 7 random hard resets in 5 or so hours
4) switched back to NATF this morning (now 4.4 from what I was running 2.2 until yesterday)
5) had three random hard resets in about 4 hours.

I'm thinking it may be the radio, so I'm going back to stock ROM right now, and then going to go back to NATF and see if it all works out.

No and it just happened to me again today after I pressed the reset button on the bottom of my phone. I am running the stock radio. It almost seems like at random times when I press the reset button on the bottom of my phone, instead of doing a soft reset it is doing a hard reset instead. It behaves just like when you choose the "Wipe Device" option in the system settings.

Today I was just getting done getting my phone syncing with Google's Gmail Calendar syncing app. The app seems to mimic syncing with an Exchange server. The previous time I had this problem it was a day or so after I had configured the phone to sync with a real exchange server. I am not sure syncing the phone with an exchange server has anything to do with this but so far that is one of the few customizations I have done to the phone after the last hard reset.

After this hard reset problem happens to me I usually do another manual hard reset just to clear things out to start over. So tonight instead of doing a hard reset again using the Vol down + Center button + Reset button technique, I tried the "Wipe Device" option under system settings. Dunno if that will make a difference but I am running out of ideas. I also completely removed the SDCard from the phone to eliminate an SDCard problem from the equation. I won't do any exchange type syncing with my phone this time to eliminate that from the equation as well.

[cheez]

This may or may not apply to everybody, but it's giving me a real headache. I cannot send SMS in Chinese. The recipient reads only a series of question marks (????????). I can read - no problem. I can even read the SMS I'm sending.

I used to use ZTA4. Now I'm using Plumsip6.1 Initially, I thought it was a problem with the font compatibility. I've changed different Chinese fonts a number of times. Problem remains - I can read, but when sent, recipient reads question marks.

It appears that there must be some kind of setting (maybe in the registry?) to solve this? This did not happen in NATF 4 or 4.1. Only this version (4.4). Also, I've hard-resetted my device many times - and installed the font and Plumsip6.1 before I installed anything else. Problem remains.

Anyone has this problem? I know not everyone uses Chinese, but working between different countries makes this really important for me. It is getting really frustrating as I cannot work without this issue solved...

[cheez]

Forget it. I solved it. Need to check the setting in messaging options: "Send unicode when necessary".

[silenthatred]

Did you ever find a solution to this? I just recently did the following (yesterday):
1) switched to the newest Raphael radio 1.12.25.19
2) test drove NRG 2.0 3/12/09 build (looking for the new Manila)
3) experienced about 7 random hard resets in 5 or so hours
4) switched back to NATF this morning (now 4.4 from what I was running 2.2 until yesterday)
5) had three random hard resets in about 4 hours.

I'm thinking it may be the radio, so I'm going back to stock ROM right now, and then going to go back to NATF and see if it all works out.

Don't think the radio is the culprit as I'm running 1.12.25.19 and NATF 4.4 Fuze Standard currently without any freezing issues.

[andrewstrauss]

This may or may not apply to everybody, but it's giving me a real headache. I cannot send SMS in Chinese. The recipient reads only a series of question marks (????????). I can read - no problem. I can even read the SMS I'm sending.

I used to use ZTA4. Now I'm using Plumsip6.1 Initially, I thought it was a problem with the font compatibility. I've changed different Chinese fonts a number of times. Problem remains - I can read, but when sent, recipient reads question marks.

It appears that there must be some kind of setting (maybe in the registry?) to solve this? This did not happen in NATF 4 or 4.1. Only this version (4.4). Also, I've hard-resetted my device many times - and installed the font and Plumsip6.1 before I installed anything else. Problem remains.

Anyone has this problem? I know not everyone uses Chinese, but working between different countries makes this really important for me. It is getting really frustrating as I cannot work without this issue solved...



In case anyone else has this problem in the future, you have to turn unicode on for sms messages. Just go to the sms inbox, then select menu -> tools -> options, then from the list of accounts, select "messages", then check "use Unicode if necessary" and you should be good to go.

If you want to turn this on by default via a UC script, try this:
<!-- *** Send unicode sms for chinese support *** -->
<characteristic type="HKCU\Software\Microsoft\Inbox\Settings" translation="filesystem">
<parm name="SMSUnicode" datatype="integer" value="1"/>
</characteristic>

[PDADoc]

I'm running into another problem: After installing v4.4 standard ROM, everything was working fine, GPS was perfect with fast lock and no lag, all the tweaks were installed and working fine, but all of a sudden I have no internet connection, even though it shows as connected in the taskbar.

I went into connection settings and discovered that it shows up as MediaNET, even though I name my connection AT&T 3G. So whenever I go into the registry and delete the extraneous entries and reset, they come right back!

The phone is working, and it's connecting to data services, I just have no internet throughput. Has anyone else had this problem? I hate to hard reset if I really don't have to, but it's looking like I don't have much choice.

Any help is appreciated.

[JoeTheFro]

I'm running into another problem: After installing v4.4 standard ROM, everything was working fine, GPS was perfect with fast lock and no lag, all the tweaks were installed and working fine, but all of a sudden I have no internet connection, even though it shows as connected in the taskbar.

I went into connection settings and discovered that it shows up as MediaNET, even though I name my connection AT&T 3G. So whenever I go into the registry and delete the extraneous entries and reset, they come right back!

The phone is working, and it's connecting to data services, I just have no internet throughput. Has anyone else had this problem? I hate to hard reset if I really don't have to, but it's looking like I don't have much choice.

Any help is appreciated.

Go through Connections. Start -> Settings -> Connections Tab -> Connections -> Manage Existing Connections.

Create a new connection... Name it whatever eg. AT&T 3G. Choose Cell Line/3G

AP Name should be - wap.cingular
No username/password/domain. Under advanced, i have software and IP compression ON. Thats it for that.

Then choose your new connection to be the main. (as in, dont leave 'Auto Pick' selected).

In some cases, the main connection has a nasty habit of changin AP names to something different, i would fix, but it would revert. Easiest was to create whole new connection and just use that.

Lemme know if it works.

[LCBrewing]

No and it just happened to me again today after I pressed the reset button on the bottom of my phone. I am running the stock radio. It almost seems like at random times when I press the reset button on the bottom of my phone, instead of doing a soft reset it is doing a hard reset instead. It behaves just like when you choose the "Wipe Device" option in the system settings.

Today I was just getting done getting my phone syncing with Google's Gmail Calendar syncing app. The app seems to mimic syncing with an Exchange server. The previous time I had this problem it was a day or so after I had configured the phone to sync with a real exchange server. I am not sure syncing the phone with an exchange server has anything to do with this but so far that is one of the few customizations I have done to the phone after the last hard reset.

After this hard reset problem happens to me I usually do another manual hard reset just to clear things out to start over. So tonight instead of doing a hard reset again using the Vol down + Center button + Reset button technique, I tried the "Wipe Device" option under system settings. Dunno if that will make a difference but I am running out of ideas. I also completely removed the SDCard from the phone to eliminate an SDCard problem from the equation. I won't do any exchange type syncing with my phone this time to eliminate that from the equation as well.

Friday afternoon I flashed back to the STOCK original ATT ROM, then immediately back to NATF 4.4. So far, so good - going on nearly 48 hours now. Syncing my exchange account and my IMAP account, and have all of my other software back on there again without a HR (even after a few soft resets). I haven't put Fuzeberry back on yet because I'm actually enjoying not having the crackberry icons for a while (but missing a few of the tabs) and am waiting patiently for the Rhodium Manila to be released (hopefully soon).

So, not sure what the culprit was, but it's looking so far like going back to STOCK and then putting on NATF has fixed it. I haven't changed radios tho...not sure I want to test fate yet. ;)

[ProjektFuze]

sorry i'm totally new at this... my first WinMo phone... so uysing NATF cooked rom.. this will increase my memory?? and speed and performance??? the task itself seems a little daunting.. but i guess thats because i've never done anything like this before... any help is appreciated...



o ya... and if anyone can tell me the advantages and disadvantages of downloading the standard 4.4 or the lite 4.4...sorry guys i get confused easily....

o ya and btw i did read through this whole thread begining from the discussion of 4.4 so please don't tell me to search the thread....

[Pjohnson]

The Opra screen from touchflo shows the Home URL. How to I edit this to a different one. I've tried and can't seem to find the link.

[htcfan78]

sorry i'm totally new at this... my first WinMo phone... so uysing NATF cooked rom.. this will increase my memory?? and speed and performance??? the task itself seems a little daunting.. but i guess thats because i've never done anything like this before... any help is appreciated...



o ya... and if anyone can tell me the advantages and disadvantages of downloading the standard 4.4 or the lite 4.4...sorry guys i get confused easily....

o ya and btw i did read through this whole thread begining from the discussion of 4.4 so please don't tell me to search the thread....

Please read this (http://forum.xda-developers.com/showthread.php?t=448008) for instructions on how to flash.

Please read this (forum.xda-developers.com/showpost.php?p=3124315&postcount=4) in the "Removed from Lite ROMs" section for a list of items not included in the lite ROM.

Look at the screen shots in post #3 to find out how much memory flashing this ROM will free up. To compare it to what you currently have, go to Start-Settings-System tab, and tap on "Memory". Hope that helps.

[ProjektFuze]

alright well i flashed my very first rom sucessfully... and all is well except thatmy music on my microsd card refuses to play... an error message pops up stating...

"the file "auidomanager_eng" cannot be opened. Either it is not signed with a trusted certificate, or one of its componeents cannot be found. if the problem persists, try to reinstalling or restoring this file....

i dont know what that means lol..... any help is appreciated once again... i really like to listen to music on my phone...



NEVERMIND... I FIGURED IT OUT... THANKS ANYWAYS...THANKS NATF LOVE THE ROM!!!