[ROM] [WWE] [GSM] [28-Oct-09] NATF's v4 Final WM6.1 TP ROMs

[dodadent]

NATF,
Dont forget to repair video call for 4.3. In 4.2 dont work, but i use it now in 4.1, and work well.

[kennyb123]

Don't forget smooth Youtube operation! Does the new HTC ROM fix this and the album issue without any tradeoffs?

[garyfunk]

Has anyone noticed problems with accuweather today?

[jkitsmiller]

Bump...am I really the only person running into this? Could it be a T-Mobile specific thing? Other T-Mobile users, are you having any problems with Pocket Internet Explorer?

I searched through the thread and can't find any mention of this so I will throw it out there.

I was using 4.1 and LOVE it. But I wanted to use PIE instead of Opera for a particular site. When I would start PIE and go to a website I would get the error:

"Cannot connect with current connection settings. To change your connection settings, tap Settings."

But it is limited, as far as I can tell, to PIE. I can use Opera just fine.

So I thought maybe I messed something up at some point and wanted to flash 4.2 anyway so I just did that. Tried PIE again and I get the same error.

Data works everywhere else.

I am using the 4.2 Touch Pro Standard and am on T-Mobile.

Thanks for any suggestions!

[josbald1975]

Hi

I'm using v3.2, with plans to upgrade to the latest ROM soon (as soon as I get time!).
Experiencing an issue when I have a wired headset plugged in via the HTC dongle attachment, incoming calls are immediately hung up on after 1 ring, with no chance to answer - the call rolls immediately to VM.
Has anyone else experienced this, and know if it's still an issue in the latest ROM release?
Thanks!!
SiDan

I use a wired headset with the ExtUSB connector and occassionally use the dongle for power at the same time. I used 1.2, 2.1, 2.3, 3.2, 4.0, 4.1 and 4.2 and have never had this issue with it disconnecting or going straight to VM

[shadowace]

Has anyone tried the JAK portal with this newest NATF rom? for me it will not load. The program requires netCF 3.5

http://forum.xda-developers.com/showthread.php?t=471576

[NFRCER]

Has anyone noticed problems with accuweather today?

Weather works fine for me :)

[pbratton]

Don't forget smooth Youtube operation! Does the new HTC ROM fix this and the album issue without any tradeoffs?

Hey, and while you're at it, voice dialing is such a chore, having to talk and all that, can you work on thought dialing?

[ryan6603]

NATF,
Dont forget to repair video call for 4.3. In 4.2 dont work, but i use it now in 4.1, and work well.

it was noted on his post about the 4.3 couple pages back. it is repaired. dont use it so have not tried it in this one.

[dodadent]

it was noted on his post about the 4.3 couple pages back. it is repaired. dont use it so have not tried it in this one.

Im still in 4.1, just for video call. I suggest to repair it in 4.3v

[JoeTheFro]

Wow, these last few posts are awesome.... Hey NaFT... can you take all your free time to do my bidding?

I understand cooking up ROMs is something the chefs like to do for the fun of making custom stuff thats better than OEM and then sharing it with us, but come on.... he's a ROM chef not a short order cook from Bangladesh....

4.2 is working like a charm and cant wait to see all the extra happy in 4.3.

Also, i never checked, but did the Stock Touch Pro or Stock Fuze ROM come with the VoIP ability? I read around that it should be built into WM, but AT&T may have stripped it from the Fuze, leaving the possibility of it floating in the Touch Pro version. (I did check that 4.2 does not have the needed files)

If this ROM for some reason doesnt work right for me, i think i'll call AT&T and see if they can whip up a better ROM instead of me complaining and barking orders to the guy donating his time/life/energy for us. (I will mention bugs through for quality control :p )

By the way Mr NaTF... Thanks for all your hard work and time making these ROMs something everyone enjoys.

[nableezy]

Wow, these last few posts are awesome.... Hey NaFT... can you take all your free time to do my bidding?

I understand cooking up ROMs is something the chefs like to do for the fun of making custom stuff thats better than OEM and then sharing it with us, but come on.... he's a ROM chef not a short order cook from Bangladesh....

4.2 is working like a charm and cant wait to see all the extra happy in 4.3.

Also, i never checked, but did the Stock Touch Pro or Stock Fuze ROM come with the VoIP ability? I read around that it should be built into WM, but AT&T may have stripped it from the Fuze, leaving the possibility of it floating in the Touch Pro version. (I did check that 4.2 does not have the needed files)

If this ROM for some reason doesnt work right for me, i think i'll call AT&T and see if they can whip up a better ROM instead of me complaining and barking orders to the guy donating his time/life/energy for us. (I will mention bugs through for quality control :p )

By the way Mr NaTF... Thanks for all your hard work and time making these ROMs something everyone enjoys.
word to the above.
But a question that I hope does not fit that, as it is starting from a new base, will 4.3 have the patched NK.exe to allow for overwriting rilphone.dll?

[JoeTheFro]

Time to test the new Raph radio 1.11.25.01 with the 4.2 ROM... I'll report my Battery/GPS/Signal findings after some testing.

This Radio includes an updated RILPhone.DLL file. If anyone else tests the radio with this ROM, I have included a CAB to install the file automatically that prompts for restart when done.

Please only use this cab for the intended Radio.

[mviana]

Ok...I hope that I'm explaining this the right way. Here goes:

I'm running v4.2 right now. I think it's a solid ROM and I'm very happy. Only thin that I want to find out is this, I installed an xt9 disable cab and it made my on screen keyboard lock in a numeric keyboard only. I'm totall cool with that because I usually use the slide out keyboard. When I create a new text message, as I'm typing in a contact's name, a little window will pop up with matches to what I am typing. So if I'm typing, "Ma..." the window will pop up with contacts that start with, "Ma..." AND it will not only list their cell number to text, it will also list an e-mail address that I can send a text too. Does v4.3 have that capability? I'm asking because I LOVE that function and I saw a couple of pages back that NATF said that the T9 issue was resolved.

Hopefully that made sense.

Thanks

Marc

[DrzNight]

Ok...I hope that I'm explaining this the right way. Here goes: I'm running v4.2 right now. I think it's a solid ROM and I'm very happy. Only thin that I want to find out is this, I installed an xt9 disable cab and it made my on screen keyboard lock in a numeric keyboard only. I'm totall cool with that because I usually use the slide out keyboard. When I create a new text message, as I'm typing in a contact's name, a little window will pop up with matches to what I am typing. So if I'm typing, "Ma..." the window will pop up with contacts that start with, "Ma..." AND it will not only list their cell number to text, it will also list an e-mail address that I can send a text too. Does v4.3 have that capability? I'm asking because I LOVE that function and I saw a couple of pages back that NATF said that the T9 issue was resolved. Hopefully that made sense. Thanks Marc I know what you mean and I'm pretty sure this feature has been in egery rom I've flashed and it should keep working even on the next rom(which im eagerly waiting for btw:))

[JoeTheFro]

As it is starting from a new base, will 4.3 have the patched NK.exe to allow for overwriting rilphone.dll?


From what i have read, the NK.exe will be patched and should already be patched for custom rilphone.dll usage. I flashed a new radio today and was able to use the rilphone that came with it... Maybe I am wrong and it works because it is suppose to be official and not a patched dll.

[NFRCER]

Ok...I hope that I'm explaining this the right way. Here goes:

I'm running v4.2 right now. I think it's a solid ROM and I'm very happy. Only thin that I want to find out is this, I installed an xt9 disable cab and it made my on screen keyboard lock in a numeric keyboard only. I'm totall cool with that because I usually use the slide out keyboard. When I create a new text message, as I'm typing in a contact's name, a little window will pop up with matches to what I am typing. So if I'm typing, "Ma..." the window will pop up with contacts that start with, "Ma..." AND it will not only list their cell number to text, it will also list an e-mail address that I can send a text too. Does v4.3 have that capability? I'm asking because I LOVE that function and I saw a couple of pages back that NATF said that the T9 issue was resolved.

Hopefully that made sense.

Thanks

Marc

If im not mistaken, this XT9 has been resolved. There is a new XT9 fix thats was posted a while back when 4.2 had been released. I advise you to use the Restore XT9 cab found at the beginning of the thread if not mistaken. once done, apply the new XT9 fix and that shall do it. Im writing this from my fuze, it would be a hassle to look it up and attached it here. As for the name thing, i can say the names do come up in the black bar not in the regular white box as it was before for the tilt. Do have in mind that the fuze does XT9 differently than the tilt as well. when the black bar comes up, the email doesnt show up though.

[tadevinney]

Was there any word about 4.3 coming out tonight? Its either that or I have to go to bed with the Mrs.. so I am hopeful for 4.3 tonight... lol

[JoeTheFro]

Has anyone tried the JAK portal with this newest NATF rom? for me it will not load. The program requires netCF 3.5

http://forum.xda-developers.com/showthread.php?t=471576

I also have JAK, and from what i have read, different methods of baking netCF into the rom can be cause for issue. I double checked and 4.2 does have netCF 3.5 cooked in, but JAK does not see/use it. Without the ability to remove it for a fresh install of netCF stops testing at that point. If i come across any more info on this, i will post it back here.

[JoeTheFro]

Was there any word about 4.3 coming out tonight? Its either that or I have to go to bed with the Mrs.. so I am hopeful for 4.3 tonight... lol

The thread has been quiet most of the day. The chef is prob doing the PM deal with the testers to work out any final kinks before bake time. (my guess)

[redgarter437]

Was there any word about 4.3 coming out tonight? Its either that or I have to go to bed with the Mrs.. so I am hopeful for 4.3 tonight... lol

LOL funny!

What's sad: I'm in the same boat as you! LOL

[JoeTheFro]

LOL funny!

What's sad: I'm in the same boat as you! LOL

Considering that it is 2:30 back in NaTF's city, you guys were probably in the same boat since 7PM this evening (PST)

[HHumbert]

Considering that it is 2:30 back in NaTF's city, you guys were probably in the same boat since 7PM this evening (PST)

Hey, we fixed it so that his Steelers won. Why can't Todd pay us back with a little 3am hacking? We can always take that last Lombardi trophy away...

[NotATreoFan]

Sorry guys, the weather was just so beautiful here yesterday (compared to the last 2 months) that I took a day away from everything computers.

I came back to a few issues with the beta build, only 1 of them severe, and I am working on fixes now. For those who are curious, the "severe" issue is: any programs installed from CAB, their shortcuts in the Start Menu flash constantly. It doesn't break anything, but it's damn annoying. :mad:

[PTzero]

Sorry guys, the weather was just so beautiful here yesterday (compared to the last 2 months) that I took a day away from everything computers.

I came back to a few issues with the beta build, only 1 of them severe, and I am working on fixes now. For those who are curious, the "severe" issue is: any programs installed from CAB, their shortcuts in the Start Menu flash constantly. It doesn't break anything, but it's damn annoying. :mad:
That is indeed an odd issue... and you're right that it would probably drive me nuts. :) Good luck with the fixes and I'm looking forward to flashing to 4.3 when it's ready. Thanks!

[garyfunk]

That is indeed an odd issue... and you're right that it would probably drive me nuts. :) Good luck with the fixes and I'm looking forward to flashing to 4.3 when it's ready. Thanks!

It wouldn't be so bad if the flashing could keep beat with music.

[clavace]

I said I would report on luck with different radios using NATF's ROMs.

(1) 1.02.25.32 - Stock - I was using stock AT&T radio that came in Fuze when new with both stock AT&T ROM and then with several NATF (v2x to v4x) ROMs with average result. It seemed to work fine but reception was poor in same known AT&T week areas I had with my Hermes & Kaiser. GPS worked ok with OCN8 but was slow to lock in.
(2) 1.08.25.08 - Diamond - I unlocked phone and tried the Radio NATF is using with NATF Fuze v4.2 standard ROM. The GPS seemed to lock on faster than with stock Radio but radio had inconsistent volume and reception problems (much worse than with stock ROM) where I heard caller fine but the callers had a hard time hearing me saying my talk volume was very low and unclear. I also had problem with phone & ringer volume going silent but I am not sure if it had anything to do with radio.
(3) 1.11.25.01 - Newest Official – Just loaded and started using. The GPS locks on very fast and talk volume is much better. Reception seems to be better than both Roms above and I will give another report in about 1 week after more use.

I am on AT&T network in Arizona. Anyone else using 1.11.25.01?

[garyfunk]

(3) 1.11.25.01 - Newest Official – Just loaded and started using. The GPS locks on very fast and talk volume is much better. Reception seems to be better than both Roms above and I will give another report in about 1 week after more use.

I am on AT&T network in Arizona. Anyone else using 1.11.25.01?
I've been following the thread and considering loading the radio ROM. The download just finished so I'm off to load it and see what happends. Did you also put in the new .dll?

[clavace]

I've been following the thread and considering loading the radio ROM. The download just finished so I'm off to load it and see what happends. Did you also put in the new .dll?

I just loaded Radio off post #2 of this thread

http://forum.xda-developers.com/showthread.php?t=439566

What .dll are you talking about?

[PTzero]

It wouldn't be so bad if the flashing could keep beat with music.
Now, that would be a neat trick. It would be even better if it blinked to the beat of music and danced around the screen. :)

[garyfunk]

I just loaded Radio off post #2 of this thread

http://forum.xda-developers.com/showthread.php?t=439566

What .dll are you talking about?

I've been following this thread:
http://forum.xda-developers.com/showthread.php?t=478657

The matching RILPhone.DLL file.

[clavace]

I've been following this thread:
http://forum.xda-developers.com/showthread.php?t=478657

The matching RILPhone.DLL file.

I looked at thread link you gave me (Thanks) and did search for RILPhone.DLL

All I could find about it was in posts #62, #165, #212

It appears that according to #62 it includes significant updates. Hmmm?

I assume I did not download this dll. with Radio from Radio Post thread I listed above.

Mr. garyfunk: Do you know if it included in the Radio upgrade link on post #1 of the thread you referred me to labeled "RADIO ONLY 1.11.25.01"? If not can you let me know where to get it and if you had a chance to try? Thanx.

NOTE: So far this Radio appears to be quite good and internet is much faster as well.

[clavace]

In settings, system, device information, after flashing v4.2 i noticed in version tab , line ExtPkg Version, says something starting with "Fail_Pkg_OpenPackageBy..." is that normal?

My Device Information Settings read as follows:

ROM version: NATF's Fuze v4.25 WWE
ROM date: 10/20/08
Radio version: 1.11.25.01
ExtPkg version: Fail_Pkg_OpenPackageBy...

It appears that part of install failed. If I remember there used to be
Protocol version: (do not remember code)

NOTE: In doing search of entire xda site it seems several other NATF users reported this same problem in this thread but could find any reason/solution. I could not find this issue listed in any other thread.

Anyone figure this out?

Perhaps this will be corrected when updating to NATF v4.3 so this will be non-issue.

[garyfunk]

I looked at thread link you gave me (Thanks) and did search for RILPhone.DLL

All I could find about it was in posts #62, #165, #212

It appears that according to #62 it includes significant updates. Hmmm?

I assume I did not download this dll. with Radio from Radio Post thread I listed above.

Mr. garyfunk: Do you know if it included in the Radio upgrade link on post #1 of the thread you referred me to labeled "RADIO ONLY 1.11.25.01"? If not can you let me know where to get it and if you had a chance to try? Thanx.

NOTE: So far this Radio appears to be quite good and internet is much faster as well.
The dll is in the file you pointed me to.

My Device Information Settings read as follows:

ROM version: NATF's Fuze v4.25 WWE
ROM date: 10/20/08
Radio version: 1.11.25.01
ExtPkg version: Fail_Pkg_OpenPackageBy...

I have:
ROM version: 5.05.NATF-4.3S WWE
ROM date: 01/22/09
Radio version: 1.11.25.01
Protocol version: 52.58.25.30U

[HHumbert]

Sorry guys, the weather was just so beautiful here yesterday (compared to the last 2 months) that I took a day away from everything computers.

I came back to a few issues with the beta build, only 1 of them severe, and I am working on fixes now. For those who are curious, the "severe" issue is: any programs installed from CAB, their shortcuts in the Start Menu flash constantly. It doesn't break anything, but it's damn annoying. :mad:

Enjoy, Bro. You've got our California weather out there for a while, without having to pay our California State income tax. Nice work.

[clavace]

I have:
ROM version: 5.05.NATF-4.3S WWE
ROM date: 01/22/09
Radio version: 1.11.25.01
Protocol version: 52.58.25.30U

Where did you get?
ROM version: 5.05.NATF-4.3S WWE

[clavace]

The dll is in the file you pointed me to.

Oooops Just re-opened Radio download and realized it was added with Radio download so YES I am using the .dll

Thx

[Lostwarriorram]

Where did you get?
ROM version: 5.05.NATF-4.3S WWE

Looks like he is part of Beta testers team who are rocking NATF 4.3. We are hoping to get a public version tonight if everything goes fine.

[garyfunk]

Oooops Just re-opened Radio download and realized it was added with Radio download so YES I am using the .dll

Thx
How did you install it? I had problems when I tried to put in on the phone.

Where did you get?
ROM version: 5.05.NATF-4.3S WWE
From NATF. He was kind enough to allow me to test it for him. He knows I'm old and married with children. So the wife enjoys getting the weekend off.

Looks like he is part of Beta testers team who are rocking NATF 4.3. We are hoping to get a public version tonight if everything goes fine.
I have given him a couple of issues he is working on. I do hope he can solve them soon. However, that being said, I hope he takes his time, and solves as many issues before he releases this ROM. 4.3 could very well be the most solid and best Fuze ROM to date. He's setting the bar pretty high for other chefs.

While I am here, I'd like to know how many here us a SD Card in their phone and what brand of card you use.

[NFRCER]

How did you install it? I had problems when I tried to put in on the phone.


From NATF. He was kind enough to allow me to test it for him. He knows I'm old and married with children. So the wife enjoys getting the weekend off.


I have given him a couple of issues he is working on. I do hope he can solve them soon.

While I am here, I'd like to know how many here us a SD Card in their phone and what brand of card you use.

Gary could you tell if that Radio ( Raph 1.11.25.01) is any better than the NAFT's Diamond Rom? Currently on the same Rom as yours, battery life wasnt as good with the latest Quartz Radio (1.11.25.01). Once I switched to the Radio NAFT is using batt has been great. Is the Raph Radio 1.11.25.01 any worth trying?

[clavace]

How did you install it? I had problems when I tried to put in on the phone.

It was installed automatically by clicking on RaphaelWrapper.exe with the radio.

You can verify by opening Total Commander then click on Windows folder. File is about ¾ the way down list.
Windows/rilphone.dll

[garyfunk]

Gary could you tell if that Radio ( Raph 1.11.25.01) is any better than the NAFT's Diamond Rom? Currently on the same Rom as yours, battery life wasnt as good with the latest Quartz Radio (1.11.25.01). Once I switched to the Radio NAFT is using batt has been great. Is the Raph Radio 1.11.25.01 any worth trying?
I don't and won't have any data on that until tomorrow. I've been connected to my notebook most of the day checking registry keys. Tomorrow, I'll be on battery and bluetooth from 5 am till 5 pm. That will give me a pretty good idea on battery life.

[garyfunk]

It was installed automatically by clicking on RaphaelWrapper.exe with the radio.

You can verify by opening Total Commander then click on Windows folder. File is about ¾ the way down list.
Windows/rilphone.dll

What is the file date on the file that is in \Windows?

[NFRCER]

I don't and won't have any data on that until tomorrow. I've been connected to my notebook most of the day checking registry keys. Tomorrow, I'll be on battery and bluetooth from 5 am till 5 pm. That will give me a pretty good idea on battery life.

Thnx man, I'll give it a try laterz if anything then.

[Lostwarriorram]

While I am here, I'd like to know how many here us a SD Card in their phone and what brand of card you use.

Transcend 8GB. Why asking?

[Jeremyl]

While I am here, I'd like to know how many here us a SD Card in their phone and what brand of card you use.

Kingston 4gb

[kennyb123]

I have a Sandisk 16GB MicroSDHC Card.

[JoeTheFro]

What is the file date on the file that is in \Windows?

Gary, check back on page 202, i posted a file to install the DLL, and i checked it after restart, and it did get copied successfully.

Also, After more than a day using the new radio, my battery is still going strong. My Speed tests also show a minor gain, and GPS locking was the fastest it has ever been for me (aGPS ON and GoogleMaps with 11 active).

[danbutter]

Transcend 8Gb class 6

[CR7KB24]

My Device Information Settings read as follows:

ROM version: NATF's Fuze v4.25 WWE
ROM date: 10/20/08
Radio version: 1.11.25.01
ExtPkg version: Fail_Pkg_OpenPackageBy...

It appears that part of install failed. If I remember there used to be
Protocol version: (do not remember code)

NOTE: In doing search of entire xda site it seems several other NATF users reported this same problem in this thread but could find any reason/solution. I could not find this issue listed in any other thread.

Anyone figure this out?

Perhaps this will be corrected when updating to NATF v4.3 so this will be non-issue.

I have this same problem :(

[garyfunk]

Okay, sorry and I didn't mean to hijack this thread.

If you could PM me, I'm looking for details on SD Card use. If you flash the ROM from your SD Card or if you use the card for UC.please let me know what card you have and that you Flash or do UC with it.

NAFT, sorry for causing the non-ROM releated posts, if you could take some of your valuable time and clean (delete) them, I'm sure everyone else will be happy.

Gary, check back on page 202, i posted a file to install the DLL, and i checked it after restart, and it did get copied successfully.

Also, After more than a day using the new radio, my battery is still going strong. My Speed tests also show a minor gain, and GPS locking was the fastest it has ever been for me (aGPS ON and GoogleMaps with 11 active).

Thanks Joe. I remember reading that post and seeing the cab. I just didn't make the connection.

EDIT: @ Joe:
I installed the cab it would not do any phone or data connection. So, something about the 4.3 test ROM and that dll don't play well together.

[nableezy]

EDIT: @ Joe:
I installed the cab it would not do any phone or data connection. So, something about the 4.3 test ROM and that dll don't play well together.
@J

I would think that has to do with the patched NK.exe that NATF was using in the old version, and now assume is no longer using, so the rilphone.dll would need to be cooked in to function.

[Da_G]

ExtPkg version: Fail_Pkg_OpenPackageBy...

^^ this is controlled by the following registry key:


[HKEY_LOCAL_MACHINE\Software\HTC\DeviceInfo]
"ShowExtPkgVersion"=dword:00000001


Which reads the following .dsm to pull a version number out of:

OEM\ExtendedPkg\f1e4d83b-7c5e-4219-b6ad-72e6fe8d8599.dsm

This .dsm is stripped out of the ROM when it is built with the "all packages to one" option.. simply set the value to 0 in the registry and be on your merry way :)

[JoeTheFro]

I would think that has to do with the patched NK.exe that NATF was using in the old version, and now assume is no longer using, so the rilphone.dll would need to be cooked in to function.

Yah, I am using the 4.2 and the cab installed and allowed data connections, so it must be related to an unpatched NK.exe in the 4.3 rom...

[NotATreoFan]

v4.3 will be uploaded by tomorrow morning, and the thread should be updated by 6:30am EST. I will add a changelog at that time.

[JoeTheFro]

v4.3 will be uploaded by tomorrow morning, and the thread should be updated by 6:30am EST. I will add a changelog at that time.

Awesome!!! Now i have something to do with my monday!! Thanks NaTF?

Last ? for the night, did the patched NK.exe make it into the final as it seems there was that slight issue with the updated dll file with the new radio that didnt play nice.

[NotATreoFan]

Awesome!!! Now i have something to do with my monday!! Thanks NaTF?

Last ? for the night, did the patched NK.exe make it into the final as it seems there was that slight issue with the updated dll file with the new radio that didnt play nice.

Yes it did. :)

[ss_0088]

While I am here, I'd like to know how many here us a SD Card in their phone and what brand of card you use.

I am using a sandisk 16gb

[Superguy]

Transcend 8GB here.

[solmaker]

Sandisk Ultra 8Gb.

I'm surprised so few people listed Ultra storage cards. Given the speed differences, I assumed the way to go was to get the biggest Ultra card, which is currently 8Gb for $59.99 list price (only $10 more that the 8Gb non-Ultra card).

Am I missing something? Unless one absolutely needs the biggest card possible, is there any reason why the smart set here isn't going Ultra?

[clavace]

What is the file date on the file that is in \Windows?

1/27/09 as is every other file on list. The date of .dll in radio download is 1/22/19. Is this a different version of the same file? If so could you extract & exchange files?

[clavace]

I have an 8GB card that came with OCN8. Since you must use this card to run program it would be nice to know what it is.

[JoeTheFro]

1/27/09 as is every other file on list. The date of .dll in radio download is 1/22/19. Is this a different version of the same file? If so could you extract & exchange files?

Not sure if this is what you are talking about, but i posted 2 images. One is the 4.2 ROM rilphone.dll version, while the other is updated rilphone.dll that was installed using the cab i posted on page 202.

[NotATreoFan]

v4.3 is up! Changelog in Post #2 updated.

[KChauJen]

v4.3 is up! Changelog in Post #2 updated.

Thanks very much, NATF.

That's what I'm waiting. :))

KCJ

[talonrob]

Just wondering if the "Updated rilphone.dll to allow Rogers/Fido Caller ID to work correctly" from v4.0 is still in 4.3? Its a nice feature to have but it was not working in v4.2 for me. If it is not in here can I add it in via a CAB file?

Thanks,

Rob.

[toorima_anchuu]

v4.3 is up! Changelog in Post #2 updated.

WOOHOO :D

i can't wait to get home and flash!

thanks NATF!

[drbenny]

I just flashed 4.3 and did a hard reset. I've found that Remove Programs has no entries. Is this happening for anyone else?

[kk0813]

NATF, thanks for the great ROM, it's very fast and smooth and good to have HD contacts tab.

[NFRCER]

I just flashed 4.3 and did a hard reset. I've found that Remove Programs has no entries. Is this happening for anyone else?

This works for me quite well, just test it again as well. Though I cant get weather to update, not even with the default city it comes with (Philadelphia, PA.. Im not that far from it anyways xD)

[NotATreoFan]

I just flashed 4.3 and did a hard reset. I've found that Remove Programs has no entries. Is this happening for anyone else?

Looking into this. It may be a simple registry fix.

This works for me quite well, just test it again as well. Though I cant get weather to update, not even with the default city it comes with (Philadelphia, PA.. Im not that far from it anyways xD)

Weather updated fine for me @ 6:30 today... was trying to decide between my winter coat and my (lighter) suede one.

[NFRCER]

Looking into this. It may be a simple registry fix.



Weather updated fine for me @ 6:30 today... was trying to decide between my winter coat and my (lighter) suede one.

ROFL :p I just put my coat on and step out xD
Edit: Im using the Touch Pro edition, which means when Connection Set up restores the settings, it has Proxy enabled by default. I turned it off, soft reset and it works :)

[Captain_Throwback]

Is anyone else getting an error when trying to add a custom city using Weather Master? I usually have no problem restoring my custom cities from my Storage Card, but I'm getting an error message telling me the database is full.

[KChauJen]

Hi NATF

Just let You know after 3 hrs of burn and installation of my preferable applications with data backup, I'm very happy and pleased with the speed and the stablility as You did on the previous cooked ROMs.

Comparing with the original ROM from _HTC_ (Raphael_HTC_WWE_5.05.405.1_Radio_Signed_52.58.25. 3 0_1.11.25.01), the speed of Manila 3D is a little bit slow, but it's OK, additional, we've got the HD Contact tab, so everybody should be happy.


Thanks so much,

KCJ

Edit: I've got weather master error related to SQL, but to me, it's not important. If You have time, please look at it to perfect your ROM

[drugusv]

hi, tell me please how i can do an security unlock too my Touch pro (GSM) ? thanks

[NotATreoFan]

Is anyone else getting an error when trying to add a custom city using Weather Master? I usually have no problem restoring my custom cities from my Storage Card, but I'm getting an error message telling me the database is full.

I'm seeing this error also when trying to add a city. I remember seeing this error reported in the Weather Master thread... let me see if I can track down the fix.

hi, tell me please how i can do an security unlock too my Touch pro (GSM) ? thanks

http://forum.xda-developers.com/showthread.php?t=426609

[drugusv]

i now this post, but how i can do this for free? :)

[NotATreoFan]

i now this post, but how i can do this for free? :)

Security Unlocking for the Touch Pro is not free.

[snusnu1987]

i now this post, but how i can do this for free? :)

Olipro said...

1) contributing forum members & Elite Team donators... PM me for a free unlock with your IMEI & email. - if you have an account that has a) existed for a good few months and b) you actually contribute to the site (technical wizardy, or general helpfulness - CONSISTENT AND REGULAR POSTING), then just drop me a message and it's yours.

[toorima_anchuu]

i can confirm the remove program problem, after multiple soft resets and adding programs i still have nothing listed.

on the weather master issue i was having the same problem, but after a couple soft resets if seems to work fine now!

Toorima

[snusnu1987]

The grid problem with Opera is greatly reduced now, seems like Opera in general is smoother and faster. However, I think I've experienced an overall decrease in performance. The touchflo3d is pretty laggy (when compared with 4.2), and the slide to answer phone is pretty laggy as well. This is a clean install of 4.3 (after hard reset), with nothing installed yet.

[Captain_Throwback]

i can confirm the remove program problem, after multiple soft resets and adding programs i still have nothing listed.

on the weather master issue i was having the same problem, but after a couple soft resets if seems to work fine now!

Toorima

I soft-reset, and it did in fact successfully import my custom cities.

My "Remove Programs" list is also empty, but if I use SKTools to check my installed programs, I can see and remove them.

[NotATreoFan]

To correct the Remove Programs applet, use any registry editor and change "HKLM\Security\Policies\Policies\00001005" from 40 to 24.

Currently installed programs will not show unless you reinstall them, but new installs will. Credit to aruppenthal for the fix. I'll be sure to correct this before uploading my kitchen files tonight. ;)

[nableezy]

To correct the Remove Programs applet, use any registry editor and change "HKLM\Security\Policies\Policies\00001005" from 40 to 24.

Currently installed programs will not show unless you reinstall them, but new installs will. Credit to aruppenthal for the fix. I'll be sure to correct this before uploading my kitchen files tonight. ;)
I dont know what happened with me, but something I installed seems to have changed that key to 16 and recently installed programs show up. Is there a need for it to be 24?

[sstrunks]

Hey NATF,

I noticed in your changelog that you removed ringtones and alerts, does that mean that there won't be any tones for the alarm function and I have to download the sounds you uploaded separately? my fuze = my alarm :-)

Will flash 4.3 as soon as I get home :-P

[JoeWilcox]

I'm seeing this error also when trying to add a city. I remember seeing this error reported in the Weather Master thread... let me see if I can track down the fix.

I saw this as well, but a soft-reset and the problem when away. I'm still looking in to it.

[garyfunk]

I've been on 4.3 for over 5 hours now and except for weather, which is mostly accuweather.com, this ROM is GREAT.

I flashed the ROM from the SD Card and then UC set in and went 100% perfect.

Thank you Todd.

[clavace]

I've been on 4.3 for over 5 hours now and except for weather, which is mostly accuweather.com, this ROM is GREAT.

I flashed the ROM from the SD Card and then UC set in and went 100% perfect.

Thank you Todd.

I have been using v4.35 now for several hours and everything seems to work great. Weather included. I took out SIM and SD cards and did hard reset at Align Screen after ROM update.

Protocol version is back as well.

NICE!

[Superguy]

Sandisk Ultra 8Gb.

I'm surprised so few people listed Ultra storage cards. Given the speed differences, I assumed the way to go was to get the biggest Ultra card, which is currently 8Gb for $59.99 list price (only $10 more that the 8Gb non-Ultra card).

Am I missing something? Unless one absolutely needs the biggest card possible, is there any reason why the smart set here isn't going Ultra?

Guess it depends where you shop. I only paid $15.99 for mine at Newegg. Don't think another $45 would be worth it for the ultra speed.

[JoeTheFro]

I've been on 4.3 for over 5 hours now and except for weather, which is mostly accuweather.com, this ROM is GREAT.

I flashed the ROM from the SD Card and then UC set in and went 100% perfect.

Thank you Todd.

Yah, minus the small glitch with apps not being seen in add/remove (That were installed with UC and first run. Did hard/soft reset and reg update)

Not worried, cause the rest of the ROM install and settings restore went smooth and in about 20 mins i have a quick ROM with all my settings in place!

[NotATreoFan]

Hey NATF,

I noticed in your changelog that you removed ringtones and alerts, does that mean that there won't be any tones for the alarm function and I have to download the sounds you uploaded separately? my fuze = my alarm :-)

Will flash 4.3 as soon as I get home :-P

Any tones/alarms that Windows Mobile uses by default are included in the ROM. I uploaded the rest to Rapidshare, and the link is in Post #4.

I saw this as well, but a soft-reset and the problem when away. I'm still looking in to it.

Hmm... soft reset worked for me too.

I've been on 4.3 for over 5 hours now and except for weather, which is mostly accuweather.com, this ROM is GREAT.

I flashed the ROM from the SD Card and then UC set in and went 100% perfect.

Thank you Todd.

Weather is behaving for me.

I have been using v4.35 now for several hours and everything seems to work great. Weather included. I took out SIM and SD cards and did hard reset at Align Screen after ROM update.

Protocol version is back as well.

NICE!

Where did you get 4.35? I didn't even release that! :p

Yah, minus the small glitch with apps not being seen in add/remove (That were installed with UC and first run. Did hard/soft reset and reg update)

Not worried, cause the rest of the ROM install and settings restore went smooth and in about 20 mins i have a quick ROM with all my settings in place!

When I upload my kitchen tonight, I'll be sure to correct the security policy causing this.

[krish_nank]

Thank you for nice ROM i do not find any bug yet considered every thing working fine & stable. I have one doubt do i have to replace .dll file for radio as i am using new radio 1.11.25.01 & could please point me a link towards GOOGLE map new ver........:)

[bpm2000]

Can some other people comment on the manilla/TF3d speeds on 4.3 that some people are saying is a downgrade from 4.2?

thx

[toorima_anchuu]

thanks for the quick Remove Programs Fix NATF! been messing with it for a couple hours and haven't found anything else wrong so far! thanks again for your awesome work!

[Bizybone]

I found a typo NATF, after that first flash, on that customization splash it reads "Please wait while your device is prepared for it's first use."

Just a honest punctuation error I make myself on plenty of occasions :)

Hell, I may have made plenty in this post.

[garyfunk]

To correct the Remove Programs applet, use any registry editor and change "HKLM\Security\Policies\Policies\00001005" from 40 to 24.

Currently installed programs will not show unless you reinstall them, but new installs will. Credit to aruppenthal for the fix. I'll be sure to correct this before uploading my kitchen files tonight. ;)

This is my fault. I asked NATF to change it.

HOWEVER, this allows remote registry management, which could be a security risk. The default is 16, and I suggest that it be set at 16, unless you really need remote registry and iknow what you are doing.

[dieKatze88]

This is my fault. I asked NATF to change it.

HOWEVER, this allows remote registry management, which could be a security risk. The default is 16, and I suggest that it be set at 16, unless you really need remote registry and iknow what you are doing.

So 16 is actually the *REAL* fix? or is it 40?

I'm OK With it either way, I just want to hit that registry value when I go in to change my AGPS servers to Nokia's (they preform much better for me than AT&Ts do) And I want to make damn sure that I get this right.

Also, is it 16 in Hex, or 16 in Decimal, same question for 40.

[DrzNight]

I found a typo NATF, after that first flash, on that customization splash it reads "Please wait while your device is prepared for it's first use."

Just a honest punctuation error I make myself on plenty of occasions :)

Hell, I may have made plenty in this post.
Here's one that I saw right away." Just an honest punctuation error I make myself on plenty of occasions."

[GSXR750K2]

Nevermind...

[clavace]

Where did you get 4.35? I didn't even release that! :p

Under Settings/Device Information it says:

ROM version: NATF Fuze 4.35 WWE
ROM date: 01/22/09
Radio version: 1.11.25.01
Protocol version: 52.58.25.30U

By the way this radio seems to work great with your new ROM.

Cheers

[garyfunk]

So 16 is actually the *REAL* fix? or is it 40?

I'm OK With it either way, I just want to hit that registry value when I go in to change my AGPS servers to Nokia's (they preform much better for me than AT&Ts do) And I want to make damn sure that I get this right.

Also, is it 16 in Hex, or 16 in Decimal, same question for 40.

The default is 16 and it is Decimal.

I have been testing 00001001 and 00001005 and from all tests, it seems only 00001001 needs to be changes to allow remote editing and for queries to run. CeRegEditor and RapiConfig both seem to only need 00001001 changed to 1. Can anyone else verify this?

[garyfunk]

Under Settings/Device Information it says:

ROM version: NATF Fuze 4.35 WWE
ROM date: 01/22/09
Radio version: 1.11.25.01
Protocol version: 52.58.25.30U

By the way this radio seems to work great with your new ROM.

Cheers
I think you will find it is 4.3S

[nitrambaxton]

Under Settings/Device Information it says:

ROM version: NATF Fuze 4.35 WWE
ROM date: 01/22/09
Radio version: 1.11.25.01
Protocol version: 52.58.25.30U

By the way this radio seems to work great with your new ROM.

Cheers
NATF Fuze 4.3 s WWE... not a 5 ;)

[clavace]

I think you will find it is 4.3S

You are correct...perhaps I need glasses.

[krish_nank]

Any one having this problem..... in TF3D pictures are not read from SD card 100 Media....... Reads only pictures in My pictures :(

[clavace]

I cannot find a registry editor included in ROM (I thought Total Commander was one but cannot find reg mode) to fix ADD/REMOVE.

What Reg editor do you recommend?

[Superguy]

I cannot find a registry editor included in ROM (I thought Total Commander was one but cannot find reg mode) to fix ADD/REMOVE.

What Reg editor do you recommend?

Total commander has one. It's under \\plugins on the root screen. You'll see registry under that with the HKxx below that.

[clavace]

Any one having this problem..... in TF3D pictures are not read from SD card 100 Media....... Reads only pictures in My pictures :(

Did you look into Programs/Advanced Config? You can set all of the storage locations to SD card.

[Captain_Throwback]

Inbox scrolling: With a large number of messages in a mail account inbox, I use a thumb flick gesture to initiate momentum scrolling. I should be able to us a single thumb tap to stop scrolling. Instead, the single thumb tap to stop is interpreted as a side swipe gesture, which causes the inbox view to jump to the next account. In other words, I can't stop scrolling without changing what mail account I'm looking at. Other Touch Pro / Fuze ROMs haven't had this issue. I've tried fiddling with Touch Flo pressure sensitivity settings in Advanced Config, but no changes there seem to have an impact.

This is probably intended behavior due to Microsoft adding touch scrolling into Windows Mobile.

FYI, I didn't see this behavior with inbox scrolling in the other ROM I've tried (RRE 4.4 based on the 21014 build), so it may not be intentional on MSft's part.

Hi NATF,

I know the above was your response to the issue of the finger-scrolling-in-the-Inbox-issue-switching-e-mail-accounts problem, based on the workaround to first highlight the message and then flick (or use the scroll bar to stop scrolling), but I've used 2 or 3 other ROMs and that behavior hasn't been the same (as indicated by the above post). Is there a way to "correct" it to perform as it did with the stock ROM, or as it does in other builds? I thought I remembered some registry entry to disable the M$ Touch scrolling (if that is in fact the cause), but I can't seem to find it.

The only reason I ask is because I use my phone to sync my corporate e-mail, and I was in a few meetings today where i needed to refer to e-mails I received earlier in the day, but when I was trying to scroll through my messages, and did the usual upward swipe, it scrolled through ALL of my messages really fast, and when I tried to stop it, it of course switched accounts - not very helpful for retrieving info while in a meeting.

Like I said, I flashed a few other chef's ROMs after 4.2 and this wasn't an issue. Maybe its an issue with the 20764 build, I don't know. Of course, once 4.3 was complete I had to come back to your ROM, but it'd be nice if I could have some help figuring this out.

[Captain_Throwback]

Any one having this problem..... in TF3D pictures are not read from SD card 100 Media....... Reads only pictures in My pictures :(

Did you look into Programs/Advanced Config? You can set all of the storage locations to SD card.

If Advanced Config doesn't work, try going to Albums, and after it starts loading Thumbnails from the "Camera Shots" folder, choose "All" as the album. Once some of those thumbnails load (it may take a while, depending on how many pictures you have), hit the Album soft key again, and you should be able to choose "Storage Card".

[NotATreoFan]

Hi NATF,

I know the above was your response to the issue of the finger-scrolling-in-the-Inbox-issue-switching-e-mail-accounts problem, based on the workaround to first highlight the message and then flick (or use the scroll bar to stop scrolling), but I've used 2 or 3 other ROMs and that behavior hasn't been the same (as indicated by the above post). Is there a way to "correct" it to perform as it did with the stock ROM, or as it does in other builds? I thought I remembered some registry entry to disable the M$ Touch scrolling (if that is in fact the cause), but I can't seem to find it.

The only reason I ask is because I use my phone to sync my corporate e-mail, and I was in a few meetings today where i needed to refer to e-mails I received earlier in the day, but when I was trying to scroll through my messages, and did the usual upward swipe, it scrolled through ALL of my messages really fast, and when I tried to stop it, it of course switched accounts - not very helpful for retrieving info while in a meeting.

Like I said, I flashed a few other chef's ROMs after 4.2 and this wasn't an issue. Maybe its an issue with the 20764 build, I don't know. Of course, once 4.3 was complete I had to come back to your ROM, but it'd be nice if I could have some help figuring this out.

Try this:


<characteristic type="HKCU\ControlPanel\Gestures\Touch" translation="filesystem">
<parm name="Disabled" datatype="integer" value="1"/>
</characteristic>


I messed up in my PROVXML, and it's actually set to "0" which does not disable the MS touch scrolling. :o

[Bizybone]

Captiain, just out of curiosity do you still have your SD card partitioned? I have a 16GB card and I was contemplating on doing it, any benefits?

[clavace]

Total commander has one. It's under \\plugins on the root screen. You'll see registry under that with the HKxx below that.

Hay Guy you are Super!

[Captain_Throwback]

Try this:


<characteristic type="HKCU\ControlPanel\Gestures\Touch" translation="filesystem">
<parm name="Disabled" datatype="integer" value="1"/>
</characteristic>


I messed up in my PROVXML, and it's actually set to "0" which does not disable the MS touch scrolling. :o

Awesome. Thanks, that definitely helped. Its not switching accounts when I stop the scroll now, but its still blazing through the list of e-mails, even on a slow swipe. I'll see what settings I can find to slow that down a bit.

[Captain_Throwback]

Captiain, just out of curiosity do you still have your SD card partitioned? I have a 16GB card and I was contemplating on doing it, any benefits?

Yeah, no, I unpartitioned it back when there were all those Album issues in the 4.0 build. I don't know whether there are any advantages to it. I did like to have my Nav software separate from my other apps and docs, but it didn't really serve any useful purpose. I kind of just did it because I could.

[garyfunk]

You are correct...perhaps I need glasses.
You and Me. I need glasses just to find my car.

[mviana]

If im not mistaken, this XT9 has been resolved. There is a new XT9 fix thats was posted a while back when 4.2 had been released. I advise you to use the Restore XT9 cab found at the beginning of the thread if not mistaken. once done, apply the new XT9 fix and that shall do it. Im writing this from my fuze, it would be a hassle to look it up and attached it here. As for the name thing, i can say the names do come up in the black bar not in the regular white box as it was before for the tilt. Do have in mind that the fuze does XT9 differently than the tilt as well. when the black bar comes up, the email doesnt show up though.


Thanks for the help, but te black bar thing is not what I'm referring to. It is a new white window that pops up right below where you type a contacts name in the "TO" section. When you find a contact, i.e. Mark Johnson, it shows the cell number, e-mail address and another cell number if there is one. Hope that clears it up.

I'm running 4.3 now and it's real smooth.

Marc

[CR7KB24]

I am looking forward to upgrading to 4.2 to 4.3, but I first want to know how is TouchFlo on here, is it faster or slower or the same, thanks ;)

[NFRCER]

Thanks for the help, but te black bar thing is not what I'm referring to. It is a new white window that pops up right below where you type a contacts name in the "TO" section. When you find a contact, i.e. Mark Johnson, it shows the cell number, e-mail address and another cell number if there is one. Hope that clears it up.

I'm running 4.3 now and it's real smooth.

Marc

I'll quote myself :p "As for the name thing, I can say the names do come up in the black bar not in the regular white box as it was before for the tilt. Do have in mind that the fuze does XT9 differently than the tilt as well. When the black bar comes up, the email doesnt show up though".

As far as i know, the Fuze does XT9 differently, therefore if not mistaken (correct me if im wrong) You will not get the white box your talking about, i am aware of wat you mean, i miss it as well =P.
Instead in the Fuze it is handled differently for wat ever reason MS, HTC, or Att decided to do. << blame them LOL

[hidden_dragon]

Todd (or anyone else), will/does Beejive work with this newer build? Thanks! I love NATF ROMS!!!

[garyfunk]

Todd (or anyone else), will/does Beejive work with this newer build? Thanks! I love NATF ROMS!!!

Yes it does. And if you save your JiveTalk.sdf file, you can restore it and not have to reconfigure.

[hidden_dragon]

Yes it does. And if you save your JiveTalk.sdf file, you can restore it and not have to reconfigure.

Cool...thanks! That sdf file is saved on my storage card, where I usually install it ;)

[garyfunk]

@NATF: Do you cook HTC Weather Master into your ROM or do you install it from the CAB?

Nevermind. I found where you stated what you did. Have you tried cooking it in your ROM?

[bottlefed1]

Im still running 4.2 and for some reason i have to reset my device every time i want to get on the internet. it only works untill i close opera then when i try to open it back up it says that it is unable to get connection.

[JoeTheFro]

Has anyone tried the JAK portal with this newest NATF rom? for me it will not load. The program requires netCF 3.5

http://forum.xda-developers.com/showthread.php?t=471576

Shadowface,
FYI - Jak Portal is working for me using the 4.3 ROM Build.

[186227]

I just updated from 4.2 to 4.3 and now sling player will not work. I'm using the same software as I did in 4.2. Anyone have any ideas why this will not work with this build? I get an error saying; "unable to connect to slingbox". I can connect on my computer fine.

[mviana]

I'll quote myself :p "As for the name thing, I can say the names do come up in the black bar not in the regular white box as it was before for the tilt. Do have in mind that the fuze does XT9 differently than the tilt as well. When the black bar comes up, the email doesnt show up though".

As far as i know, the Fuze does XT9 differently, therefore if not mistaken (correct me if im wrong) You will not get the white box your talking about, i am aware of wat you mean, i miss it as well =P.
Instead in the Fuze it is handled differently for wat ever reason MS, HTC, or Att decided to do. << blame them LOL


NFRCER,

Thanks for stating that again..got the second time around. I'm slow...shoot me..;) I guess I'll just install that xt9 cab that I have. I don't really use the onscreen keyboard that much so if it locks in the numeric layout it's cool.

Marc

[Matesse]

Love everything about this Rom so far!!!

Fantastic Work!!!!

[NFRCER]

NFRCER,

Thanks for stating that again..got the second time around. I'm slow...shoot me..;) I guess I'll just install that xt9 cab that I have. I don't really use the onscreen keyboard that much so if it locks in the numeric layout it's cool.

Marc

No need to shoot anyone over here :) Honestly i just read my post and it sounds a bit harsh unless im crazy :eek:

Here is the updated XT9 fix if needed :http://forum.xda-developers.com/showpost.php?p=3241772&postcount=1668
Hope I can be of any more assistance :cool:

[FUZE_User]

Hey guys quick question, if I install this software, will I have to reinstall everything that came w/ the phone or is it all packaged inside of the installer?

This software looks great, I just don't want to have to install everything that came w/ the phone, my applications im ok reinstalling though since I only have beejive / jivetalk.

[NFRCER]

Hey guys quick question, if I install this software, will I have to reinstall everything that came w/ the phone or is it all packaged inside of the installer?

This software looks great, I just don't want to have to install everything that came w/ the phone, my applications im ok reinstalling though since I only have beejive / jivetalk.

My First question would be, Do you have a Fuze or Touch pro? If so have you ever installed a Rom on it?
Basically if you had a fuze, you wouldnt need to re-install wat ever it brought.
There are 2 editions Fuze or Touch Pro,
basically they are both just like Att's Rom or Htc's Rom but clean
(minus the crap each carrier or OEM puts in it) plus the tweaks our chefs love :)

[FUZE_User]

My First question would be, Do you have a Fuze or Touch pro? If so have you ever installed a Rom on it?
Basically if you had a fuze, you wouldnt need to re-install wat ever it brought.
There are 2 editions Fuze or Touch Pro,
basically they are both just like Att's Rom or Htc's Rom but clean
(minus the crap each carrier or OEM puts in it) plus the tweaks our chefs love :)


I have A FUZE && Have installed nothing on it but beejive. So I dont have to reinstall the software, my opera etc. will still be there

[NFRCER]

I have A FUZE && Have installed nothing on it but beejive. So I dont have to reinstall the software, my opera etc. will still be there

Welcome aboard the XDA ship. These links shall come in handy for you :rolleyes: Treat these links as your quick start guide, there is much to learn.
But this is the first thing you need to know: You must have Hard-spl, otherwise you'll end up bricking you precious device (We dont want that ;) )
LINK for Hard-spl: http://forum.xda-developers.com/showthread.php?t=410150

This guide here covers Hard-spl procedure as well as flashing your first Rom: http://forum.xda-developers.com/showthread.php?t=448008
Plz do not hesitate to ask for more help if you need it, just make sue you do it kindly and as humble as possible.

Edit: The Roms bring opera by default, as well as the useful apps each Rom brings when sold to you by the carrier. Also the chefs include Useful Apps that they think wil suit to us the users and as well as them. Though you would lose the users settings such as bookmarks and contacts so be sure to back them up before flashing it your new Rom.

[garyfunk]

I have A FUZE && Have installed nothing on it but beejive. So I dont have to reinstall the software, my opera etc. will still be there

Reinstall what software? Read the first 4 posts, then read them again and then one more time.

[redgarter437]

I may have found a potential problem with the 4.3 ROM. It's more of an annoyance than a problem though ;)

I just replied to an email using the Phone Keypad input method, T9 enabled. As i was typing, instead of the first item being the first suggested word, it was the first letter of the numbers I was trying to type (as if T9 wasn't enabled). However, the correct word (T9 dictionary word) was highlighted.

Example: typing the numberpad equivalent of "2668437" gets the black bar result "ammtgdp another" with "another" highlighted. In most XT9 builds this doesn't happen.

Does anyone else see this (admittedly minor) annoyance in an otherwise great ROM?

Cheers NATF!

[bamf-hacker]

OK I just flashed to 4.3. NATF did you remove the upload to Facebook and Youtube option or am I just not looking in the right place. If it is gone do you have a cab to put it back?

As always, thanks for a great ROM

[CR7KB24]

Well i just installed the new rom and I an having alot of problems with TouchFlo starting up, the screen freezes with the TF logo :(

[NFRCER]

Reinstall what software? Read the first 4 posts, then read them again and then one more time.

He means the software that comes pre-loaded with the phone. I am taking the time to explain him this is the same thing minus the bloatware Att puts in it.

[cp1md2b]

I just updated from 4.2 to 4.3 and now sling player will not work. I'm using the same software as I did in 4.2. Anyone have any ideas why this will not work with this build? I get an error saying; "unable to connect to slingbox". I can connect on my computer fine.


I run sling media as well. I'm not seing any problem. I have run on all of NATF's ROM's without any problem since I started using them. (kaiser to now). It has to be something in your setup. I would suggest deleting the active sync releationship, install the Mobile software again. (be sure that you have registered. and then active sync to your desktop after you flash.

[PTzero]

I just updated from 4.2 to 4.3 and now sling player will not work. I'm using the same software as I did in 4.2. Anyone have any ideas why this will not work with this build? I get an error saying; "unable to connect to slingbox". I can connect on my computer fine.
Slingplayer is working fine for me on 4.3

[garyfunk]

He means the software that comes pre-loaded with the phone. I am taking the time to explain him this is the same thing minus the bloatware Att puts in it.
I hope that's not true. If it is, what's the point? That's like saying "I want a new car, but I want it to run as bad as my old car."

[metal450]

Has anyone tried out any of the ICR Cabs (http://forum.xda-developers.com/showthread.php?t=474920&page=17) on v4.3? I was able to get it working on 4.1 but not 4.2, so I held back on the upgrade... :)

[NFRCER]

I hope that's not true. If it is, what's the point? That's like saying "I want a new car, but I want it to run as bad as my old car."
Well let's see, he's new. Therefore he doesnt know, isnt why we all here for? To improve this community and as well to improve our cellphones?
He has been pointed to the right links,
Hopefully he reads post # 2 on Mskip's Handy guide
which in basic terms explains it well for him:

** FREQUENTLY ASKED QUESTIONS AND HELP WHEN FLASHING **

1. What the benifits are of flashing a new rom?
Flashing a New Rom basically gets rid of all the garbage thats included on Stock Roms and Flashes a Clean, Optimized, Fully loaded Rom that will squeeze every ounce of speed and stability from your phone. Chefs usually include all the programs you are ever likely to need and because the Rom has been cleaned out you are left with more memory to play around with.


Now, can we just get to testing our shiny new Rom?:cool:

[xhypnotik]

......................

[JZ SmartMort]

I soft-reset, and it did in fact successfully import my custom cities.

My "Remove Programs" list is also empty, but if I use SKTools to check my installed programs, I can see and remove them.

I agree. I don't know what magic SKTools pulls out but they seem to clean up apps much better than Pocket Mechanic and MemMaid. My app actually has uninstall issues but after removing it with SKTools, I am now able to install and uninstall my app as I please.

I know of a few places for app install information like:


Files - "\Windows\AppMgr"
Registry - "HKLM\Software\Apps"

If anybody knows, please share. Where else is install information kept on Windows Mobile?

Thanks!
JZ

[Lawrencectam]

Hi,
I just flashed but having issues loading FuzeBerry themes. Anyone else?

[xhypnotik]

[QUOTE=NotATreoFan;3299051]To correct the Remove Programs applet, use any registry editor and change "HKLM\Security\Policies\Policies\00001005" from 40 to 24.

While trying to do this. I accidentally renamed something to z (I'm pretty sure something that start with a S or near S, I thought I renamed Security

Can someone help me?

AudioCompressionManager
ButtonApps
Comm
ControlPanel
Drivers
Drivers32
Explorer
ExtModems
HARDWARE
Ident
init
Loader
MUI
nls
Platform
Security
Services
Snd
Software
System
TAPI
Telephony
Time
Windows CE Services
Windows CE Tools
z

[Superguy]

Hay Guy you are Super!

NP ... it was a little tricky for me to find at first too. :)

NATF,

Here are a few things I experieced:

Annoying text bugs (not resetting count and black box) - gone! /clap

Big thing I experienced was issues with Weather Master. If I try to edit, or even set to an existing entry, I get SQL Lite errors, saying the DB is full. However, a soft reset fixed that. Additionally, though, if I have the keyboard slid out and I try to go to the symbol page (FN+Space), it says its on the page, but nothing comes up. Same if I try to use the onscreen keyboard. I've had to put the Accuweather codes in in vertical mode using the onscreen compact keyboard.

There's also using the d-pad for scrolling, it tends to skip a few past the contact I'm trying to get to.

Overall, I'm liking this ROM ... best one yet!

Super

[NotATreoFan]

OK I just flashed to 4.3. NATF did you remove the upload to Facebook and Youtube option or am I just not looking in the right place. If it is gone do you have a cab to put it back?

As always, thanks for a great ROM

I removed the version of HTC Album required for these features because it suffered from the non-working slideshow, and fixing the slideshow with htcmdp.dll slowed YouTube to a crawl.

Well i just installed the new rom and I an having alot of problems with TouchFlo starting up, the screen freezes with the TF logo :(

You're the first to report this. :(

Has anyone tried out any of the ICR Cabs (http://forum.xda-developers.com/showthread.php?t=474920&page=17) on v4.3? I was able to get it working on 4.1 but not 4.2, so I held back on the upgrade... :)

I don't use ICR, so I cannot say for sure.

While trying to do this. I accidentally renamed Security to z. And then the password settings pop-up saying "Password policy settings require that you update your password at this time". Is there a way to fix this? Need help ASAP!

If you cannot get back into the registry to undo the rename, then you will have to hard reset.

Hi,
I just flashed but having issues loading FuzeBerry themes. Anyone else?

Be sure to disable TF3D, soft reset, and then install Fuzeberry.

[Imatard2006]

I just updated from 4.2 to 4.3 and now sling player will not work. I'm using the same software as I did in 4.2. Anyone have any ideas why this will not work with this build? I get an error saying; "unable to connect to slingbox". I can connect on my computer fine.

Sync phone to desktop, run sling player from phone. all your reg files should download from desktop onto phone. Disconnect phone from desktop and run sling player again.

[xhypnotik]

While trying to do this. I accidentally renamed something to z (I'm pretty sure something that start with a S or near S, I thought I renamed Security)
HTC Fuze/Touch Pro v4.3 Standard
Can someone help me?

AudioCompressionManager
ButtonApps
Comm
ControlPanel
Drivers
Drivers32
Explorer
ExtModems
HARDWARE
Ident
init
Loader
MUI
nls
Platform
Security
Services
Snd
Software
System
TAPI
Telephony
Time
Windows CE Services
Windows CE Tools
z

That's odd. Why does it keep post when I edit a post?

[NotATreoFan]

The kitchen files for v4.3 are up in Post #4. All issues reported up until right now have been corrected in those files.

[garyfunk]

Well let's see, he's new. Therefore he doesnt know, isnt why we all here for? To improve this community and as well to improve our cellphones?
I was new. I read about 5000 messages before I ever posted. I knew most of the answers without ever asking a question. It seems today, the new ones want it handed to them. Oh well. That's just like life in the USA. Everyone wants it handed to them.

[DrzNight]

HTC Fuze/Touch Pro v4.3 Standard
Can someone help me?

AudioCompressionManager
ButtonApps
Comm
ControlPanel
Drivers
Drivers32
Explorer
ExtModems
HARDWARE
Ident
init
Loader
MUI
nls
Platform
Security
Services
Snd
Software
System
TAPI
Telephony
Time
Windows CE Services
Windows CE Tools
z

That's odd. Why does it keep post when I edit a post?

Looking at my registry (at&t fuze) I could not see anything that you replaced and you might actually have created one from what I can tell.

[NotATreoFan]

HTC Fuze/Touch Pro v4.3 Standard
Can someone help me?

AudioCompressionManager
ButtonApps
Comm
ControlPanel
Drivers
Drivers32
Explorer
ExtModems
HARDWARE
Ident
init
Loader
MUI
nls
Platform
Security
Services
Snd
Software
System
TAPI
Telephony
Time
Windows CE Services
Windows CE Tools
z

That's odd. Why does it keep post when I edit a post?

My HKLM matches your exactly except that I have an entry for <RegPersisted> with a Decimal value of 1 below the folders.

[NFRCER]

HTC Fuze/Touch Pro v4.3 Standard
Can someone help me?

AudioCompressionManager
ButtonApps
Comm
ControlPanel
Drivers
Drivers32
Explorer
ExtModems
HARDWARE
Ident
init
Loader
MUI
nls
Platform
Security
Services
Snd
Software
System
TAPI
Telephony
Time
Windows CE Services
Windows CE Tools
z

That's odd. Why does it keep post when I edit a post?
Only thing you didnt mention was: +Add Value+ and RegPersisted. Everything else you mentioned is there, nothing seems to be missing :confused:
------
He beat me to it. he's the expert so um take wat ever i said with a grain of salt :D

[garyfunk]

To correct the Remove Programs applet, use any registry editor and change "HKLM\Security\Policies\Policies\00001005" from 40 to 24.

While trying to do this. I accidentally renamed something to z (I'm pretty sure something that start with a S or near S, I thought I renamed Security

Can someone help me?

AudioCompressionManager
ButtonApps
Comm
ControlPanel
Drivers
Drivers32
Explorer
ExtModems
HARDWARE
Ident
init
Loader
MUI
nls
Platform
Security
Services
Snd
Software
System
TAPI
Telephony
Time
Windows CE Services
Windows CE Tools
z
They are all there. Open z and tell me what is in it, and I'll try to tell you where it goes.

[DrzNight]

Hey NATF, do you think you can give like a mini changelog as to what problems did you correct in the kitchen files? I know you probably fixed the remove programs list. Anything else?

[NotATreoFan]

Hey NATF, do you think you can give like a mini changelog as to what problems did you correct in the kitchen files? I know you probably fixed the remove programs list. Anything else?


Remove Programs fixed.
MS Touch Scrolling disabled. (resolves TF3D changing accounts when you flick thru Email)
Default text size set to Medium instead of Medium-Large.
HTC Weather Master now installed as package instead of a CAB file. (I tried cooking it in, but it sent my phone is a loop where the program launched at every reboot)
Merged some CABs for a cleaner install footprint.


There's probably more that I can't remember now.

[garyfunk]

Well i just installed the new rom and I an having alot of problems with TouchFlo starting up, the screen freezes with the TF logo :(

You're the first to report this. :(

I had this happen a on 4.3 beta. I would pull out the SD Card and then it would boot fine. I haven't had it happen with 4.3 release.

[xhypnotik]

Thanks guys for the response. I actually renamed the "Security" folder to z. When It prompted me to type a in a password. It probably created a Security folder blah blah blah after comparing what's in the folder before and after hard reset just assuming. So yeah, I did the registry fix for the "remove program" and it worked great. Awesome rom NATF!

[Lawrencectam]

Hi,
I just flashed but having issues loading FuzeBerry themes. Anyone else?

I'm an idiot. I always get in a routine when I flash new ROMs to get the apps back installed. Forgot all about disabling TF3D first.

[reluttr]

Im having major issues with weather master, when I try to add a city it gives me a database error. ANyone happen to know how to fix it?

[CR7KB24]

You're the first to report this.

Well this seemed to have stopped after using it for about a hour :)

One more thing, does anyone happen to know the manila files for the buttons under the contacts in the peoples tab

[sniperess]

so does name display work for rogers/fido? it didn't work for me in 4.2 but it did in 4.1 :(

[DrzNight]

Anyone know where in the kitchen is the custom splash screen? Thanks in advance. (not interested in removing it but I might be trying to make my own rom later on and would like to know how to do this in the future):)

[metal450]

Whenever I run the 4.3 kitchen, AVG detects a virus in \Tools\htcrt.exe. 4.2 ran with no problems...

[NFRCER]

Whenever I run the 4.3 kitchen, AVG detects a virus in \Tools\htcrt.exe. 4.2 ran with no problems...

Its safe. I have downloaded it successfully/ NVM the rest...

[BoldFace]

Strange problem here: Wifi is greyed in the comm manager, but I can turn it on in the Wireless LAN settings and off in the Configure Wireless Networks.

[redgarter437]

Strange problem here: Wifi is greyed in the comm manager, but I can turn it on in the Wireless LAN settings and off in the Configure Wireless Networks.

I can confirm this as well!

[DrzNight]

I can confirm this as well!

Working fine on my rom but I'm using a slightly customized version from the kitchen:p

[cheez]

Im having major issues with weather master, when I try to add a city it gives me a database error. ANyone happen to know how to fix it?


I concur. Same problem here.

[globaltrasher]

The kitchen files for v4.3 are up in Post #4. All issues reported up until right now have been corrected in those files.NATF,

So the actual ROM hasn't been updated with those fixes, correct? Any chance for an updated ROM then or we'd need to wait for v4.4?


Thanks for the great work!

EDIT: Nevermind, I just cooked it myself :) Thanks for the files...

[Matesse]

in the options in the weather master you can scroll over to the "auto-config" tab that allows you to "save to storage device" and "manual restore"

i selected them both ..

and afterward everything worked


... now i'm losing my data connection ... but that's probably ATT's fault

[Gundem]

i searched about 50 pages... but i can't see why File Explorer (ex) is not showing up. Task bars reads File Explorer and the X is present on the right side of the window...

anyways...much props but i had to revert back to RC3.

[cheez]

Thanks Matesse for the solution to Weather Master. Yes, it worked now. Queer though.

[NFRCER]

Strange problem here: Wifi is greyed in the comm manager, but I can turn it on in the Wireless LAN settings and off in the Configure Wireless Networks.

I can confirm this as well!

Works fine on my end. This is like my 3rd hard reset just in case c(:
No prob here with programs not appearing in remove list or greyed out Wifi. If possible try hard resetting again, see if it helps.

[Black915]

To correct the Remove Programs applet, use any registry editor and change "HKLM\Security\Policies\Policies\00001005" from 40 to 24.

Currently installed programs will not show unless you reinstall them, but new installs will. Credit to aruppenthal for the fix. I'll be sure to correct this before uploading my kitchen files tonight. ;)

i tired doing this and changing it to 16 but still no luck :mad:

[JoeTheFro]

i tired doing this and changing it to 16 but still no luck :mad:

From what i have seen on my phone, this tweak does not bring back install entries that occured before tweaking. All future installs will be listed however. If you have a tool like SKTools, you can see all installed apps from there.

[Vanquil]

This is my first NATF ROM so maybe I am just missing some setting that needs to be switched. But when I set up my secure connection to my wireless it says its connected, I can see it on the network just fine. The programs even seem to understand there is a connection (Clicking onto the weather page or opening opera doesn't start my data connection). But when they actually try to update or view a webpage they return "error in connection" or webpage not found.

I did a search for other wireless issues in this forum and came across some people who were having an issue with the wireless being grayed out. Mine is not grayed out. It can be clicked on and off through the connections manager screen.

*I switched from a ROMeOS2 1.51.
*I did hard reset twice, just to be safe incase this was a problem with some lingering file from that os.
*I am using the Fuze version of this OS (Since I have a fuze :P)

Not sure what other information you may need. But feel free to ask. I need wireless badly as I use it to update much of what I keep on my phone and also to quickly access webpages without my pc.

Thanks,

Vanquil

[NotATreoFan]

so does name display work for rogers/fido? it didn't work for me in 4.2 but it did in 4.1 :(

Probably not. But nk.exe is patched in the ROM to allow you to overwrite rilphone.dll with a compatible version.

Anyone know where in the kitchen is the custom splash screen? Thanks in advance. (not interested in removing it but I might be trying to make my own rom later on and would like to know how to do this in the future):)

I didn't include the splash screen in the kitchen.

Strange problem here: Wifi is greyed in the comm manager, but I can turn it on in the Wireless LAN settings and off in the Configure Wireless Networks.

I can confirm this as well!

No problem here. Did you change the Comm Manager in any way?

[aruppenthal]

Strange problem here: Wifi is greyed in the comm manager, but I can turn it on in the Wireless LAN settings and off in the Configure Wireless Networks
This is not a bug. The new build has a new comm manager. The newer comm managers are made this way. If you connect to the pc it disables the wifi button. It does this because they assume you have no need to connect to wifi if you are connected to the pc. When you are connected to the pc you get internet via USB. The only way to make this go away is to revert to an older comm manager. This has to be done via cooking and cannot be changed by the user.

It should work as expected if not connected via USB

[jglev]

This is not a bug. The new build has a new comm manager. The newer comm managers are made this way. If you connect to the pc it disables the wifi button. It does this because they assume you have no need to connect to wifi if you are connected to the pc. When you are connected to the pc you get internet via USB. The only way to make this go away is to revert to an older comm manager. This has to be done via cooking and cannot be changed by the user.

It should work as expected if not connected via USB

Yup, I can confirm this. If you are connected to a PC, the WiFi is grayed out. As soon as you disconect it, it becomes un-grayed.

I just wanted to say that I have been following this thread ever since NATF started cooking the Fuze ROMs and had held off installing one because of some issues with the other ROMs. Now that 4.3 is out, I pulled the trigger yesterday and have found that this ROM is absolutely fantastic! Except for the Remove Program bug which was easily fixed, I have had absolutly no issues. And MS Voice Command actually works as it should. This ROM is in a different league than the original released ATT ROM. Anyone who is on the fence should just do it. You won't regret it. It's amazing!

Thanks NATF.

[toorima_anchuu]

anyone else notice that activesync isn't constantly popping up in the task manager? that makes me all warm and fuzzy :p

i always hated the way it did that

[NotATreoFan]

This is not a bug. The new build has a new comm manager. The newer comm managers are made this way. If you connect to the pc it disables the wifi button. It does this because they assume you have no need to connect to wifi if you are connected to the pc. When you are connected to the pc you get internet via USB. The only way to make this go away is to revert to an older comm manager. This has to be done via cooking and cannot be changed by the user.

It should work as expected if not connected via USB

Thank you for explaining this. I don't even use WiFi on my Fuze, so it never crossed my mind.

[NotATreoFan]

anyone else notice that activesync isn't constantly popping up in the task manager? that makes me all warm and fuzzy :p

i always hated the way it did that

HTC probably fixed the glitch... finally. ;)

[PTzero]

HTC probably fixed the glitch... finally. ;)
I always thought ActiveSync needed to be running in order for Direct Push from my Exchange server to work correctly, however I no longer see ActiveSync in the task manager but I still get push email. It's a good thing. :)

[Doinshots]

I have flashed from 4.2 to 4.3. I used SPB Backup to restore and everything works perfectly thus far.

Thanks NATF. Love your ROMS.

[Username:]

The kitchen files for v4.3 are up in Post #4. All issues reported up until right now have been corrected in those files.

Hey NATF, do you think you can give like a mini changelog as to what problems did you correct in the kitchen files? I know you probably fixed the remove programs list. Anything else?


Remove Programs fixed.
MS Touch Scrolling disabled. (resolves TF3D changing accounts when you flick thru Email)
Default text size set to Medium instead of Medium-Large.
HTC Weather Master now installed as package instead of a CAB file. (I tried cooking it in, but it sent my phone is a loop where the program launched at every reboot)
Merged some CABs for a cleaner install footprint.


There's probably more that I can't remember now.

Since NATF's kitchen files have the fixes for all the known problems with his 4.3 ROM, how can I use them instead of them instead of his "regular" 4.3 ROM?

Or better yet for noobs like me, NATF, can you make the fixes to your "regular" ROM download?

Perhaps a NATF ROM 4.3.1 release.

Great work, by the way!

[nableezy]

Originally Posted by View Post
Well i just installed the new rom and I an having alot of problems with TouchFlo starting up, the screen freezes with the TF logo
You're the first to report this.
I had this happen a on 4.3 beta. I would pull out the SD Card and then it would boot fine. I haven't had it happen with 4.3 release.
This is happening to me too, about 50% of the reboots freeze on the TF logo, and often TF3D needs to restart. Have hard reset a couple time trying to figure out what is going on, but it seems to be happening out of the box for me with no applications installed or any email or anything else set up

[ewuzh]

Hello,

This was my first ROM flash ever. Performance-wise the image is 10000x better and waay faster compared to the original junk AT&T image. Everything responds instantly with no lag, battery lasts much much longer (the phone used to die before the day was over and now its still at around 60% with "typical" usage), and I like how the phone vibrates to confirm screen taps. Thank you NATF!

I seem to be the only one with this issue (?), but ever since flashing to your v4.2 ROM, the phone has randomly powered itself down (completely off) a couple of times. This happened once during the afternoon and once overnight, leaving me without my alarm going off in the morning. Both times the phone was just idling with S2U loaded and plenty of battery life. Infact, the phone was plugged in and charging when it decided to just shut-off overnight.

Any ideas why this could be happening? I wonder if it's software or hardware related... I might give v4.3 a try later today if the random shutdowns occur again. But other than that, it's a great image.

[TKhawk01]

I love this ROM, I hesitated for a while because I was worried about messing something up but yall make it so simple, thanks. I just have one favor to ask, could you put the kitchen files on the mirror or directlink, my network blocks rapidshare, they dont like peer to peer sharing, and I guess my conection is to slow on my fuze for me to download it, it gives me a error message. Thanks again.

[ozzieruiz]

This is going to sound dumb,but it's my first time cooking roms and stuff
(everything went fine), everything looks fine with this new version,I just wanted to do that "Kitchen Issues Fixed Update" in post 4.Question is how do I install that update,do I have to do it like I cooked this rom into my phone or different? anyone with a quick step by step guide. thanks ya'll, and yes this rom is way better than others I've tried. So please help out a noob. thanks

[jglev]

Hello,

This was my first ROM flash ever. Performance-wise the image is 10000x better and waay faster compared to the original junk AT&T image. Everything responds instantly with no lag, battery lasts much much longer (the phone used to die before the day was over and now its still at around 60% with "typical" usage), and I like how the phone vibrates to confirm screen taps. Thank you NATF!

I seem to be the only one with this issue (?), but ever since flashing to your v4.2 ROM, the phone has randomly powered itself down (completely off) a couple of times. This happened once during the afternoon and once overnight, leaving me without my alarm going off in the morning. Both times the phone was just idling with S2U loaded and plenty of battery life. Infact, the phone was plugged in and charging when it decided to just shut-off overnight.

Any ideas why this could be happening? I wonder if it's software or hardware related... I might give v4.3 a try later today if the random shutdowns occur again. But other than that, it's a great image.


I went from the stock ATT ROM to 4.3. I have been using it for over 24 hours now and have not had any random shutdown issues. It really is a great ROM. I would suggest flashing 4.3 especially if you are having issues with 4.2.

[NotATreoFan]

I love this ROM, I hesitated for a while because I was worried about messing something up but yall make it so simple, thanks. I just have one favor to ask, could you put the kitchen files on the mirror or directlink, my network blocks rapidshare, they dont like peer to peer sharing, and I guess my conection is to slow on my fuze for me to download it, it gives me a error message. Thanks again.

I did not upload the kitchen files to my direct host since I'm already chewing through enough of his bandwidth just in ROM downloads. I'd also prefer that people do not mirror the kitchen files since they can change at any time.

If you give me the name of a free host that isn't blocked, I'll see what I can do.

[kcnaylor]

Since NATF's kitchen files have the fixes for all the known problems with his 4.3 ROM, how can I use them instead of them instead of his "regular" 4.3 ROM?

Or better yet for noobs like me, NATF, can you make the fixes to your "regular" ROM download?

Perhaps a NATF ROM 4.3.1 release.

Great work, by the way!

Short of releasing an updated ROM, any chance of getting at least a few of these fixes which are registry-related in a cab. In particular a cab with the REmove Programs fix that I could put at the beginning of my UC SDConfig.txt file so all the subsequent cabs would be uninstallable. I took a stab at this with the UC XML cmd and provisioning file but wasn't able to get it to work.

And, I agree - definitely great work.

[shadowace]

I did not upload the kitchen files to my direct host since I'm already chewing through enough of his bandwidth just in ROM downloads. I'd also prefer that people do not mirror the kitchen files since they can change at any time.

If you give me the name of a free host that isn't blocked, I'll see what I can do.

I would be glad to throw the kitchen files on my host just as a temporary solution for you if you like. Then remove after this user grabs them.

[ewuzh]

I went from the stock ATT ROM to 4.3. I have been using it for over 24 hours now and have not had any random shutdown issues. It really is a great ROM. I would suggest flashing 4.3 especially if you are having issues with 4.2.

Just flashed to v4.3, but before I did, I noticed some funny business in the Device Information screen. That one line with ExtPkg version looked broken. Maybe it was a bad flash or something. Anyway, it's only been a couple of hours, but everything seems OK so far. I'm crossing my fingers!

v4.2 vs. v4.3
http://farm4.static.flickr.com/3428/3270043250_82009cf35f.jpghttp://farm4.static.flickr.com/3524/3269386535_923a389b83.jpg

[NotATreoFan]

Short of releasing an updated ROM, any chance of getting at least a few of these fixes which are registry-related in a cab. In particular a cab with the REmove Programs fix that I could put at the beginning of my UC SDConfig.txt file so all the subsequent cabs would be uninstallable. I took a stab at this with the UC XML cmd and provisioning file but wasn't able to get it to work.

And, I agree - definitely great work.

Here ya go.

This CAB fixes Remove Programs (only programs installed AFTER this) and also disables the MS touch gestures.

http://rapidshare.com/files/196500748/NATF_v4.3_Quick_Fix_CAB.cab (Rapidshare Direct Download)

[garyfunk]

@NATF:
On your next test ROM, would you please remove the file attrbutes from the file 2330fc3c_minila? This is the weather data file and I think this may help solve the Weather Master problem.

@Joe
I am testing this now by removing hidden, system, and read-only, then rebooting the phone. Then going into Weather Master and doing a restore. No more SQL errors.

I can only guess that even though Weather Master removes these attributes, some program has the file locked with read-only and a reboot stops that.

[Vanquil]

This is my first NATF ROM so maybe I am just missing some setting that needs to be switched. But when I set up my secure connection to my wireless it says its connected, I can see it on the network just fine. The programs even seem to understand there is a connection (Clicking onto the weather page or opening opera doesn't start my data connection). But when they actually try to update or view a webpage they return "error in connection" or webpage not found.

I did a search for other wireless issues in this forum and came across some people who were having an issue with the wireless being grayed out. Mine is not grayed out. It can be clicked on and off through the connections manager screen.

*I switched from a ROMeOS2 1.51.
*I did hard reset twice, just to be safe incase this was a problem with some lingering file from that os.
*I am using the Fuze version of this OS (Since I have a fuze :P)

Not sure what other information you may need. But feel free to ask. I need wireless badly as I use it to update much of what I keep on my phone and also to quickly access webpages without my pc.

Thanks,

Vanquil

Its been nearly twelve hours since I posted my problem and no one seems to have an answer for me. It is still not working today. Did I not give the proper information to get some assistance?

Any assistance will help.

Vanquil

[godashram]

not sure if any other apps do this... but running the finalburn emu.... i get a "driver error: out of memory" popup and then it crashes back to the homescreen when running cps3 roms (and yes, i also do own the same games on cps3 hardware).
this only popped up with 4.3

any ideas?

[bpm2000]

Its been nearly twelve hours since I posted my problem and no one seems to have an answer for me. It is still not working today. Did I not give the proper information to get some assistance?

Any assistance will help.

Vanquil

probably because nobody else is experiencing this problem - have you tried reflashing completely?

[DrzNight]

Its been nearly twelve hours since I posted my problem and no one seems to have an answer for me. It is still not working today. Did I not give the proper information to get some assistance?

Any assistance will help.

Vanquil

Post what type of phone do you have, carrier, radio, and if you use UC. Also try a reflash of the rom and radio. I'm having no problems so something must be going on with your setup.

[7boo]

It doesnt give me the option to remove programs is anyone else having this issue?

[CR7KB24]

It doesnt give me the option to remove programs is anyone else having this issue?

I too do not have the option to remove programs in the settings.

And just a quick comment, this might fix after I use the new rom for a while, like most of the other problems I have, but in a seven hours without even taking my phone out of my pocket, my batttery went from 98% to 16% :(

[garyfunk]

It doesnt give me the option to remove programs is anyone else having this issue?

What is this "it" you speak of.

Before you answer, go here and read the all the posts till you get to the end.
http://forum.xda-developers.com/showthread.php?t=469450&page=208
I too am having this problem, I just realized it.

And just a quick comment, this might fix after I use the new rom for a while, like most of the other problems I have, but in a seven hours without even taking my phone out of my pocket, it went from 98% to 16% :(

Boy, "it" sure is popular today.

[Vanquil]

Post what type of phone do you have, carrier, radio, and if you use UC. Also try a reflash of the rom and radio. I'm having no problems so something must be going on with your setup.

I have a Fuze, At&t carrier with it of course. I have tried both the 1.11.25.01 and 1.08.20 radios. (Figured I would try another radio if I had to go through reflashing anyway. I just got done reflashing, even downloaded another copy of NATF, just to rule out corrupted download. Everything is working great. BUT I still cannot use my wireless. Still the same issue. Says its connected, shows 2 solid arrows next to the wireless symbol. But still nothing will download.

[CR7KB24]

Boy, "it" sure is popular today.

The "it" I am talking about is having the option to remove installed programs, I can't remove installed programs, the box is empty, even though i have alot of programs installed.

[nableezy]

The "it" I am talking about is having the option to remove installed programs, I can't remove installed programs, the box is empty, even though i have alot of programs installed.
And the "it" you are talking about has been discussed in past posts. Im kinda high right now so I dont feel like looking through them, but "it" has been discussed, root cause found, and solution (partial: will show any programs you install from now on) released. Follow the link above and read the posts.

[garyfunk]

The "it" I am talking about is having the option to remove installed programs, I can't remove installed programs, the box is empty, even though i have alot of programs installed.
Explain to me how that "it went from 98% to 16%." You can only remove 16% of your programs?

And the "it" you are talking about has been discussed in past posts. Im kinda high right now so I dont feel like looking through them, but "it" has been discussed, root cause found, and solution (partial: will show any programs you install from now on) released. Follow the link above and read the posts.

I already gave both of them the link to start reading. I wonder if they will.

[CR7KB24]

Explain to me how that "it went from 98% to 16%." You can only remove 16% of your programs?

Really sorry about that, i was talking about my battery in the second portion :o


And for the programs thing, I found a fix for it, guess I missed that one

[oaa8]

@NATF:
On your next test ROM, would you please remove the file attrbutes from the file 2330fc3c_minila? This is the weather data file and I think this may help solve the Weather Master problem.

@Joe
I am testing this now by removing hidden, system, and read-only, then rebooting the phone. Then going into Weather Master and doing a restore. No more SQL errors.

I can only guess that even though Weather Master removes these attributes, some program has the file locked with read-only and a reboot stops that.

I just rebooted and the errors went away. Maybe that was the fix, not the attributes.

Here ya go.

This CAB fixes Remove Programs (only programs installed AFTER this) and also disables the MS touch gestures.

http://rapidshare.com/files/196500748/NATF_v4.3_Quick_Fix_CAB.cab (Rapidshare Direct Download)

I realize this is causing problems but anyone else think the smoothness of the windows scroll is smoother than touchflo's. The way to tell the difference is by pressing until a vibrate is felt and then doing the scroll gesture. MS Touch Gestures has to be enabled of course but the speed, acceleration and deceleration seem much smoother and dynamic. Than Touchflo's Two-Speed scrolling. Maybe in the future the Touchflo scroll could be replaced by the MS scroll or somehow given MS scroll properties.

[amarpatel]

I'm trying to extract the .nbh file, but for some reason its not working, I can extract the wrapper, but then I get an error for the .nbh, it says "incorrect password?" in an error for winrar

[bottlefed1]

I never found an answer someone please help me i posting this again

Im still running 4.2 and for some reason i have to reset my device every time i want to get on the internet. it only works untill i close opera then when i try to open it back up it says that it is unable to get connection.

[garyfunk]

I just rebooted and the errors went away. Maybe that was the fix, not the attributes.
The error went away after reboot, because Weather Master changes the attributes after it runs. If the file is not read-only, then Weather Master won't error out the first time it is run. So you see, it's all the same. Better to not have any errors.

I never found an answer someone please help me i posting this again

Im still running 4.2 and for some reason i have to reset my device every time i want to get on the internet. it only works untill i close opera then when i try to open it back up it says that it is unable to get connection.
I think I read this is fixed n 4.3.

[bottlefed1]

The error went away after reboot, because Weather Master changes the attributes after it runs. If the file is not read-only, then Weather Master won't error out the first time it is run. So you see, it's all the same. Better to not have any errors.


I think I read this is fixed n 4.3.


can this be confirmed since ive had this problem with last 2 roms i installed

[shadowace]

for what it is worth I have noted that I do not get the weather master error if I am sure to delete all the cities in TF3D before I open weather master....

[hidden_dragon]

I want to thank NATF for another super ROM! I thought I was going to stick with v3.2 for a long time. This version (4.3) is faster and works well with all of my programs (which is a major criteria). GPS seems to lock just as fast (I use GPSToday instead of the provided programs) and MSVC works flawlessly. So far, I haven't run into any issues. This ROM works with Matt's Fuzeberry theme as well as the newly released RAPH radio (battery life is just as good as v3.2). Oh, and I love the additional key remapping!

[garyfunk]

can this be confirmed since ive had this problem with last 2 roms i installed
Discussion of v4.3 begins as Post #2064 (http://forum.xda-developers.com/showthread.php?p=3297742#post3297742).

[TurboX2]

for what it is worth I have noted that I do not get the weather master error if I am sure to delete all the cities in TF3D before I open weather master....

great find!!

[redgarter437]

To Vanquil -

Your problem is most likely with the hidden proxy in both Opera and Internet Explorer. Search the forums for how to remove this setting and it should work on Wifi. Of course, when you try to use cellular it'll screw up again until you redo the proxy settings...

To NATF and/or anyone else -

Has anyone seen the T9 problem I described? My Wifi in Comm Manager is not greyed out anymore, but the T9 problem is seriously giving me reservations...

Thanks for any help anyone can give!

[Black915]

thanks for the fix and btw is there anyways to uninstall the slide to answer or make it black?

[amarpatel]

I really need help. I'm trying to flash 4.3 right now
it stuck on the "update in progress" screen
I'm doing it from the SD card
help
its been stuck for about 10 minutes

[shadowace]

great find!!

Actually I am not sure it (weather master SQL error) behaves exactly this way. I was flashing around some tonight and didn't get this to repeat each time. So your mileage may vary....

[7boo]

Some reason its not letting me send / recieve MMS or even try to email a MMS to someone. Any reason?

[rareness4]

Has anyone experienced any program icons flashing or blinking? I'm trying out some different things to fix it, just want to know if I was the only one experiencing it.

[Akodo]

Anyone else having any issues with Opera? Is there a way to edit the Opera connection settings? I'd like to snoop around and try to fix my issue.

-What's going on is that Opera won't load any webpages, it will show that it is both connected to the internet, and transferring data, and eventually it will revert to an idle connection icon. But the web page will never load. The progress bar will advance slightly, but never fully load. This problem only occurs in Opera, all my other data connections operate smoothly.

Sorry for sounding so noobish, I'm working on my technical knowledge of WM and I soon hope to contribute back, NAFT, this is a great ROM, keep of the good work

[dlweston]

Im having major issues with weather master, when I try to add a city it gives me a database error. ANyone happen to know how to fix it?

Do you know how to read or search posts? The answer has been posted in this thread multiple times already. I wait a couple days after a new ROM is uploaded. That lets everybody else find the issues. I then read all the post, so I know the fixes before I install the ROM.

[amarpatel]

for some reason, whenever I try to extract your ROMs, the .nbh file won't get extracted

[jkitsmiller]

I'm trying to extract the .nbh file, but for some reason its not working, I can extract the wrapper, but then I get an error for the .nbh, it says "incorrect password?" in an error for winrar

On the first page of this thread where you download, it has the password for the file.

[dlweston]

I too do not have the option to remove programs in the settings.

And just a quick comment, this might fix after I use the new rom for a while, like most of the other problems I have, but in a seven hours without even taking my phone out of my pocket, my batttery went from 98% to 16% :(

Senior member, so I assume you are using TouchLockPro or another screen locking problem? I had this problem all the time with several ROMs until I found TouchLockPro. It has never been a problem since.

[dlweston]

thanks for the fix and btw is there anyways to uninstall the slide to answer or make it black?

Ditto here. I do not see the need for slide to answer, but some people think it is so neat. I guess I am going to have to stay with 4.2 if slide to answer is in 4.3 and can not be removed.

[reluttr]

Do you know how to read or search posts? The answer has been posted in this thread multiple times already. I wait a couple days after a new ROM is uploaded. That lets everybody else find the issues. I then read all the post, so I know the fixes before I install the ROM.
Actually I did figure out the problem, but for some odd reason I would not let me edit my post. It stated "You do not have the proper permissions to do this action", so I just left it XD

For those that are interested, it turns out that weather master puts files on the sd and mine was full; so that is why I was getting the database error. I simply fixed it by deleting unused files on my sd.

[amarpatel]

On the first page of this thread where you download, it has the password for the file.

I know, but for some reason it doesn't work for me
I had one of my friends try it too, he got the same error
I tried 2 different programs

[JoeWilcox]

@NATF:
On your next test ROM, would you please remove the file attrbutes from the file 2330fc3c_minila? This is the weather data file and I think this may help solve the Weather Master problem.

@Joe
I am testing this now by removing hidden, system, and read-only, then rebooting the phone. Then going into Weather Master and doing a restore. No more SQL errors.

I can only guess that even though Weather Master removes these attributes, some program has the file locked with read-only and a reboot stops that.

Weather Master attempts to reset the file attribute every time the database is accessed. But in truth, with files cooked in to the rom, you don't actually adjust the file, but cause a shadow copy of the file to be made. Something is messing with that process. Installing it from a cab will fix that since the cab will install a fresh DB file and that will force a shadow copy to be made.

I'm absolutely clueless to why it's not working.

[CR7KB24]

I really need help. I'm trying to flash 4.3 right now
it stuck on the "update in progress" screen
I'm doing it from the SD card
help
its been stuck for about 10 minutes

If you have not yet figured this out, try pushing the reset button with the stylus, hope that helps :)

[Black915]

Ditto here. I do not see the need for slide to answer, but some people think it is so neat. I guess I am going to have to stay with 4.2 if slide to answer is in 4.3 and can not be removed.

yeah I think it's neat too but it would be better if it was black :)

[CR7KB24]

Senior member, so I assume you are using TouchLockPro or another screen locking problem? I had this problem all the time with several ROMs until I found TouchLockPro. It has never been a problem since.

Ya, I kinda figured that, I was using Pocket Shield witch i guess eats up the battery like crazy, so i left that, and I will see what happens when using S2U2 tomorrow, Thanks for the advice :)

[jkitsmiller]

I know, but for some reason it doesn't work for me
I had one of my friends try it too, he got the same error
I tried 2 different programs

If you haven't already tried redownloading you might want to. I use 7-zip to extract and it worked fine.

[xhypnotik]

Hey, I noticed you that you removed the upload to YouTube, Facebook. Is there a possible way to download it?

[DrzNight]

Hey, I noticed you that you removed the upload to YouTube, Facebook. Is there a possible way to download it?

Along the same lines... I cooked in the social networking htc album and have not noticed any problems whatsoever (deleted album oem and cooked the album package from Da G's kitchen in as a package). Youtube seems to be running great and I haven't experienced the unread issues. If there was another issue that could have come from this tweak I'd love to know. I wouldn't want to find out later that I broke something crucial.:)

[californiarailroader]

Do you know how to read or search posts? The answer has been posted in this thread multiple times already. I wait a couple days after a new ROM is uploaded. That lets everybody else find the issues. I then read all the post, so I know the fixes before I install the ROM.



Do you know how to be nice and not act rude? :)

[adriciu]

I had previously the 4.2 version, and I installed also the S2U2-1.44-QVGA. As a result (or at least this is what I believe) everything went south, with several freezes, time lags for different commands, etc. Do you think I'll have the same problems with the 4.3 ROM? Or to rephrase the questions, are there known incompatibilities between 4.3 and S2U2?
Thanks
Adriciu

[toorima_anchuu]

Hey NATF, just wondering if the 4.3 rom file has been updated with the removed program fix? i am thinking about reflashing so that i can remove the S2A program. downloaded the new throttle lock and wanted to test out it's S2A, and having two S2As is a lot more of a pain than i would have imagined :D

[danthman2000]

I have tried numerous builds and cooks and this is by far the best i have found. I am using the v4.3 ROM along with the 1.11.25.01 Radio, and haven't seen this type of speed and GPS link-up speed before, can't wait for the next one! :D :D :D

[TheWebMachine]

I had this happen a on 4.3 beta. I would pull out the SD Card and then it would boot fine. I haven't had it happen with 4.3 release.

This is often caused by partial corruption of the sd card. You need to plug it into a PC and run a scan on the disk in windows to repair the file system. This can happen if you soft reset when the phone is writing to the card. TF3D freezes because it can't properly scan the card for content.

This is not a bug. The new build has a new comm manager. The newer comm managers are made this way. If you connect to the pc it disables the wifi button. It does this because they assume you have no need to connect to wifi if you are connected to the pc. When you are connected to the pc you get internet via USB. The only way to make this go away is to revert to an older comm manager. This has to be done via cooking and cannot be changed by the user.

It should work as expected if not connected via USB

Um, the cause for this is a setting on the PC. In ActiveSync or Mobile Device Center Connection Settings, you need to check the "Allow data connections on device when connected to PC." box. It forces both wifi and cellular data to disable.

---

Sorry folks, I've been busy. I'm back and just installed v4.3...I'll let ya know what I turn up.

~TWM

[amarpatel]

If you have not yet figured this out, try pushing the reset button with the stylus, hope that helps :)

haha yeah thanks, I figured that out.
now I'm getting a ROM update error. I expected something because it didn't flash all the way (stopped at like 75 percent)
I'm using the microSD card method, I think if I put a working ROM file onto my card, I can reflash and everything will be OK
problem is, my microSD card adaptor isn't working

[amarpatel]

is there any way I can flash my phone from my PC if I can't get past the tri-color screen?

[NotATreoFan]

Ditto here. I do not see the need for slide to answer, but some people think it is so neat. I guess I am going to have to stay with 4.2 if slide to answer is in 4.3 and can not be removed.

This is not a custom dialer. This in the new HTC dialer.

Along the same lines... I cooked in the social networking htc album and have not noticed any problems whatsoever (deleted album oem and cooked the album package from Da G's kitchen in as a package). Youtube seems to be running great and I haven't experienced the unread issues. If there was another issue that could have come from this tweak I'd love to know. I wouldn't want to find out later that I broke something crucial.:)

I'll cook up a test version tonight to see if this official build works with that Album and does not affect YouTube. If it's OK, then it will return in v4.4.

Hey NATF, just wondering if the 4.3 rom file has been updated with the removed program fix? i am thinking about reflashing so that i can remove the S2A program. downloaded the new throttle lock and wanted to test out it's S2A, and having two S2As is a lot more of a pain than i would have imagined :D

No it has not. v4.3 still has the issue, but I posted a CAB fix a few pages back. This is not a custom dialer. This in the new HTC dialer.

is there any way I can flash my phone from my PC if I can't get past the tri-color screen?

From the bootloader, plug in a USB cable, and you should see USB on the screen. Then run RaphaelWrapper.exe.