[ROM] [WWE] [GSM] [28-Oct-09] NATF's v4 Final WM6.1 TP ROMs

[NotATreoFan]

NATF's Fuze and Touch Pro ROMs
| Current Release: v4 Final | 28 October 2009 |


Please Search (http://forum.xda-developers.com/showthread.php?t=469450&nojs=1#goto_threadsearch) the Thread Before Posting A Question.


Changelog / Known Issues in Post #2
Screenshots in Post #3
Downloads in Post #4




All ROMs use SYS and XIP from OS 21054. The HTC-based ROMs use the Asia 5.07 OEM folder, and the AT&T ROM uses the AT&T 5.05 OEM folder.





DO NOT FLASH any of these ROMs TO A Non-GSM Touch Pro!
(i.e Sprint, Verizon, Alltel, Telus, etc...)





Helping Support the NATF School of ROM Cooking and Useful Advice (http://tinyurl.com/NATF-XDA):


| cushcalc | Knumb | mchapman007 | freakSHO | garyfunk | Scott C. | P1Tater | goestoeleven | tankers | James P. | buckyg | kavi | wisniak | Roy L. | P. Tsai | David R. | golden_mine | ecltech | Joseph W. | Zac S. | Undef | Jonathan O. | garydchi | Robert C. | HHumbert | toucankiwi | keeevin (at) mindspring (dot) com | Keith H. | muscleman7911 | jtsurfs | AvengerBB | Sanath K. | TheWebMachine | Ying C. | Martin R. | William S. | The Computer Geek | Brad S. | Cheng T. | Chris J. | James L. | OneSikPuppy | Superguy | Michel P. | John B. | Audichris9 | rightjb | ryan6603 | solmaker | Bimboy | JoeTheFro | DrunkenOstrich | Mario M. | pcarenthuz | globaltrasher | Sean D. | Wilson C. | David C. | peabody304 | Undef | Justin R. | aak4 | John P. | donnana | californiarailroader | Marnix H | John B | Timothy F | RedDawg22 | DerekHaltom | rightjb | DavidJ84 | skyfox99 | Christopher C | nableezy | bpm2000 | greenlep | Joseph T. | FloridaDoc | Deepak P. | shimbob | Hurrycaine3000 | T'anjuihsien M. | Daniel R. | Steven K. | jaadkd36 | Matthew B. | reellis | Sean D. | Jdilla | darwinmach | 4wrestling | Grace J. | toorima_anchuu | DYCENV | egasber | josbald1975 | Taylor T. | RiddlesMom | K Tristan M. | TurboX2 | Sujit D | PvtHudson666 | PACHIS | Tracy J. | DavidJ84 | Nelson R. | DMerrill | Anatoly Y. | Kenneth K. | Johnny B. | LBCta | Reed I, | ttres | Deepak P. | kenny hektik | jonluvslqc | Yuri K. | BDSBoston | Raheel Malik | Brian G. | Michael R. | Daniel C. | StevePritchard | dloranger | gsm_user | rafa81 | Sujit D. | bfspider | d96mbe | Elrendhel | Felix T. | Saman K. | John M. |

Thank you all very much!
Please include your XDA User ID so I can thank you personally!

Donations are never required, but always appreciated.

[NotATreoFan]

Splash Screen:

My ROMs are distributed with a custom boot splash screen, so if you flash to a different ROM that does not include one, you will still see my screen during boot up. Go to this thread (http://forum.xda-developers.com/showthread.php?t=436105) for instructions on changing your initial (boot) splash screen.



Radios:

Because radio performance tends to vary greatly from area to area, I do not include one with any of my ROMs. You can flash any Raphael radio to your Fuze/Touch Pro, and if your phone is security unlocked, you can also flash radios from the Diamond, Blackstone, Xperia, and a few other HTC devices.



UC: (User Customization)

These ROMs are UC Compatible. If you are not familiar with UC, check out the this thread (http://forum.xda-developers.com/showthread.php?t=366337) for details. PLEASE NOTE: UC runs automatically upon Initial Customization finishing. Your phone will automatically reset after about 1 minute.



Changelog:


[From v4.7 -> v4 Final]



OS build upgraded to 21054.
Added tom_codon's WiFi Sharing (w/ required MortScript). [Not in Lite ROMs]
Added tarkim's Keyboard Config. [Not in Lite ROMs]
A few small performance tweaks.



Discussion of v4 Final begins as Post #4469 (http://forum.xda-developers.com/showthread.php?p=4837186#post4837186).



[From v4.6 -> v4.7]



Rhodium Notification Manager, Menu Enhancements, and CommManager still work! (Standard CommManager included in Lite ROMs)
Downgraded OS build to 20771 (for stability purposes).
Downgraded MSVC to prior version. (Should resolve the issues with notifications playing full length during phone calls)
Downgraded xt9 package to a custom version. (Should resolve the keyboard lag and 'sending SMS to 0')
Updated Windows Live to v10.6.0052.1300 (25-May-2009).
Updated Opera build to 15613. Supports most Flash content.
Updated HTC Volume Control to Tachi build.
Removed HTC In-Call Recording from AT&T Standard ROM (due to requirement of HTC S2A dialer... still included in HTC Standard ROM).
Added Slick IM v0.48 Beta.



Discussion of v4.7 begins as Post #4096 (http://forum.xda-developers.com/showthread.php?p=3846020#post3846020).



[From v4.5 -> v4.6]



Updated OS build to 21042 (still WM6.1)
Updated WinRAR to 3.80 Final
Updated ClearTemp to 1.2.1
Updated HTC Weather Master to 1.3
Updated Windows Live to newest with push Hotmail
Added HTC In-Call Recording
Added Rhodium Notification Manager
Added Rhodium Menu Enhancement
Added Rhodium CommManager
Added 3 default WM ringtones back into the ROM
Fixed MEdia Net settings being Read Only
Fixed Tools folder showing first in Start Menu order
Changed the location of some shortcuts in the Programs menu.



Discussion of v4.6 begins as Post #3710 (http://forum.xda-developers.com/showthread.php?p=3622644#post3622644).



Issues and Bug Reports:


[v4 Final]


Onscreen keyboard not working. Once I find a compatible EzInput package, I will post it for people to add to the kitchen. If enough demand, I will recook the ROMs as well.

[NotATreoFan]

Screenshots:



HTC Fuze/Touch Pro v4 Final Standard


http://i289.photobucket.com/albums/ll220/toddthegr8/NATF%20Screens/NATF_v4_Final_Standard.png


The Lite ROMs have ~350MB free storage on first boot.

[NotATreoFan]

Download Links:


If you have a Rapidshare Premium Account, please use the RS links. It will conserve bandwidth on the direct links, and help earn free extensions on both our Rapidshare accounts.
Please Note: All RGU/DSM files have been merged. Please download my kitchen if you wish to further customize my ROMs.


[Oct 28th - v4 Final] - Password: "NATF says goodbye to WM6.1"


| Direct Link (http://www.natf.info/ROMs/v4/NATF-v4-Final-Fuze-Standard.7z) | Rapidshare (http://rapidshare.com/files/299332401/NATF-v4-Final-Fuze-Standard.7z) | HTC Fuze v4 Final Standard
| Direct Link (http://www.natf.info/ROMs/v4/NATF-v4-Final-TP-Standard.7z) | Rapidshare (http://rapidshare.com/files/299341690/NATF-v4-Final-TP-Standard.7z) | HTC Touch Pro v4 Final Standard
| Direct Link (http://www.natf.info/ROMs/v4/NATF-v4-Final-Fuze-Lite.7z) | Rapidshare (http://rapidshare.com/files/299324344/NATF-v4-Final-Fuze-Lite.7z) | HTC Fuze v4 Final Lite
| Direct Link (http://www.natf.info/ROMs/v4/NATF-v4-Final-TP-Lite.7z) | Rapidshare (http://rapidshare.com/files/299334190/NATF-v4-Final-TP-Lite.7z) | HTC Touch Pro v4 Final Lite

| Direct Link (http://www.natf.info/ROMs/v4/NATF-v4-Final-Fuze-PTT.7z) | Rapidshare (http://rapidshare.com/files/299328105/NATF-v4-Final-Fuze-PTT.7z) | HTC Fuze 4 Final w/ Push-to-Talk Support -- Identical to Standard, except PTTMod has been removed, and AT&T PTT software has been added.



[May 27th - v4.7] - Password: NATF v4 Series


| Direct Link (http://www.natf.info/ROMs/v4/NATF_Fuze_Standard_v4.7.rar) | Rapidshare (http://rapidshare.com/files/237979592/NATF_Fuze_Standard_v4.7.rar) | HTC Fuze v4.7 Standard
| Direct Link (http://www.natf.info/ROMs/v4/NATF_TP_Standard_v4.7.rar) | Rapidshare (http://rapidshare.com/files/237899283/NATF_TP_Standard_v4.7.rar) | HTC Touch Pro v4.7 Standard
| Direct Link (http://www.natf.info/ROMs/v4/NATF_Fuze_Lite_v4.7.rar) | Rapidshare (http://rapidshare.com/files/237908358/NATF_Fuze_Lite_v4.7.rar) | HTC Fuze v4.7 Lite
| Direct Link (http://www.natf.info/ROMs/v4/NATF_TP_Lite_v4.7.rar) | Rapidshare (http://rapidshare.com/files/237920679/NATF_TP_Lite_v4.7.rar) | HTC Touch Pro v4.7 Lite

| Direct Link (http://www.natf.info/ROMs/v4/NATF_Fuze_PTT_v4.7.rar) | Rapidshare (http://rapidshare.com/files/237903001/NATF_Fuze_PTT_v4.7.rar) | HTC Fuze 4.7 w/ Push-to-Talk Support -- Identical to Standard, except PTTMod has been removed, and AT&T PTT software has been added.



Kitchen: - Password: "NATF v4 Final Kitchen"


| Rapidshare (http://rapidshare.com/files/299332192/NATF-v4-Final-Fuze-Standard-Kitchen.7z) | v4 Final Fuze Standard Kitchen
| Rapidshare (http://rapidshare.com/files/299341635/NATF-v4-Final-TP-Standard-Kitchen.7z) | v4 Final Touch Pro Standard Kitchen

| Rapidshare (http://rapidshare.com/files/299323956/NATF-v4-Final-Fuze-Lite-Kitchen.7z) | v4 Final Fuze Lite Kitchen
| Rapidshare (http://rapidshare.com/files/299334003/NATF-v4-Final-TP-Lite-Kitchen.7z) | v4 Final Touch Pro Lite Kitchen

| Rapidshare (http://rapidshare.com/files/299327601/NATF-v4-Final-Fuze-PTT-Kitchen.7z) | v4 Final Fuze PTT Kitchen



Extras:


Addon CABs:

Block Breaker Deluxe (http://rapidshare.com/files/163566072/BlockBreakerDeluxe_105.cab)
AT&T Mobile Backup (http://rapidshare.com/files/163566080/MobileBackup_1.0.0_signed_move_shortcut.cab)
AT&T TeleNav (http://rapidshare.com/files/163566073/GetATTNavigator_NoTestAccount.CAB)
GetMail (http://rapidshare.com/files/163566074/GetMail_20080830.CAB)
Java Preloads (http://rapidshare.com/files/163566075/Java_Preloads_20081015.cab)
JetCet Printing (http://rapidshare.com/files/163566076/JETCET5_PPC_v5.0.904.10_1.cab)
JewelQuest II (http://rapidshare.com/files/163566077/JQ2_0-1-0_20080905.cab)
Midnight Pool 3D (http://rapidshare.com/files/163566078/MidnightPool3D_20080813.cab)
MobiTV (http://rapidshare.com/files/163566081/MobiTV.3.0.4.68563.cab)
Ms. PacMan (http://rapidshare.com/files/163566082/MsPacMan_20080910.cab)
OZ Instant Messenger (http://rapidshare.com/files/163566687/OzIM.2.0.84.M.cab)
Sudoku (http://rapidshare.com/files/163566688/Sudoku_0.11.66.cab)
XM Radio (http://rapidshare.com/files/163566689/XMRadio.3.0.4.68563.cab)
Original HTC Alerts and Ringtones (http://rapidshare.com/files/194651537/HTC_Ringtones_and_Alerts.zip) - Copy alerts to \Windows\, and ringtones to \Windows\Rings - UPDATED files from HTC's 5.05 WWE ROM
BeeJive IM (http://rapidshare.com/files/143890345/BeejiveIM.CAB)
GPS Test v1.04 (http://rapidshare.com/files/143890348/GPSTest_v1.04.cab)
Opera Mini 2008-06-18 (http://rapidshare.com/files/143895330/Opera_Mini_18_06_2008.cab)
Opera Mini v4.2 (http://rapidshare.com/files/168439703/opera-mini-4.2.13216.zip) - Extract ZIP file to your device, run the JAR file to install. NOTE: Opera Mini will not start a data connection. You need to do this prior to launching it.
Opera 9.5 (http://rapidshare.com/files/168398895/WM6_PPC_HTC_Opera9_WWE__AT_T_Ship_Version_.cab) - Original version of Opera shipped with the Fuze [AT&T Hidden Proxy included in CAB]
Opera 9.5 Build 2745 (http://rapidshare.com/files/168398896/WM6_PPC_HTC_Opera9_WWE__Build_2745_Large_Skin_.cab ) - Updated version of Opera, but with a larger standard skin [AT&T Hidden Proxy included in CAB]
PocketRAR 3.80 Beta 4 (http://rapidshare.com/files/143896313/PocketRAR_3.80_Beta_4.cab) - Great replacement for HTC Zip
SoftReset (http://rapidshare.com/files/144920976/Soft_Reset.cab)
RemoveHiddenProxy (http://rapidshare.com/files/141702945/removeHiddenProxy4CWS_1219.cab)
RestoreHiddenProxy (http://rapidshare.com/files/141702946/restoreHiddenProxy4CWS_1219.cab)


NATF Custom CABs:


Revert Programs and Settings menus to 3 icons per row (http://rapidshare.com/files/166798092/NATF_Revert_to_3_Icons.cab) - Rapidshare Direct Download
Restore top and bottom curtains in TouchFLO 3D (http://rapidshare.com/files/176503392/NATF_Restore_Curtains.cab) - Rapidshare Direct Download
AT&T PhoneCanvas Dialer w/ Video Share (http://rapidshare.com/files/201433657/NATF_ATT_PhoneCanvas.cab)
AT&T PhoneCanvas Dialer w/ S2A, Video Share, and PTT (http://rapidshare.com/files/214719635/NATF_ATT_Slider_with_PTT.cab) - Will NOT work if PTTMod is installed on your device.
HTC Slide2Answer Dialer w/ Video Call (http://rapidshare.com/files/201433655/NATF_HTC_5.05_Sliding_Dialer.cab)


Removed from Lite ROMs:


Adobe Reader LE v2.5 (http://rapidshare.com/files/201954218/NATF_Adobe_PDF.cab)
Advanced Config v3.3 (Schap's) (http://rapidshare.com/files/201954213/Advanced_Configuration_Tool_v3.3.cab)
ClearTemp v1.2 (http://rapidshare.com/files/201954222/NATF_ClearTemp_v1.2.cab)
Diamond TF3D Config (http://rapidshare.com/files/201954214/Diamond_TF3D_Config_v0.6.7.cab)
File Explorer Extension (http://rapidshare.com/files/201954215/File_Explorer_Extension.cab)
FInixNOverBatteryIconsOnly (http://rapidshare.com/files/201954216/FInixNOverBatteryIconsOnly.cab)
HTC AudioBooster (http://rapidshare.com/files/201954219/NATF_AudioBooster.cab)
HTC AudioManager (http://rapidshare.com/files/201954220/NATF_AudioManager.cab)
HTC FM Radio (http://rapidshare.com/files/201955181/NATF_FM_Radio.cab)
HTC GPS Tool (http://rapidshare.com/files/201955182/NATF_GPS_Tool.cab)
HTC MP3 Trimmer (http://rapidshare.com/files/201955184/NATF_MP3_Trimmer.cab)
HTC TouchFLO 3D (CFC Compressed) (http://rapidshare.com/files/202227314/NATF_Manila_CFC.cab)
HTC Weather Master v1.0 (http://rapidshare.com/files/201954217/HTC_Weather_Master_1.0.cab)
Jbed Java (http://rapidshare.com/files/201955183/NATF_Jbed_Java.cab)
QuickGPS v1815.2630.2 (http://rapidshare.com/files/201955186/NATF_QuickGPS_1815.2630.2.cab)
PocketRAR Beta 4 (http://rapidshare.com/files/201955185/NATF_PocketRAR.cab)
RSS Hub (http://rapidshare.com/files/201955187/NATF_RSS_Hub.cab)
Streaming Media (http://rapidshare.com/files/201955188/NATF_Streaming_Media.cab)
Teeter (Labyrinth) (http://rapidshare.com/files/201955189/NATF_Teeter.cab)
Total Commander v2.51 (http://rapidshare.com/files/201955191/NATF_Total_Commander.cab)
TouchResponse (http://rapidshare.com/files/201957405/NATF_TouchResponse.cab)
Voice Recorder (OEM) (http://rapidshare.com/files/201957406/NATF_Voice_Recorder.cab)
Windows Live 10.6.0048.1500 (w/ Messenger) (http://rapidshare.com/files/202228065/NATF_Windows_Live_10.6.0048.1500.cab)
WorldCard Mobile (http://rapidshare.com/files/201954221/NATF_Business_Card_Reader.cab)
YouTube v1.0.1820.2727 (http://rapidshare.com/files/201957407/NATF_YouTube_1.0.1820.2727.cab)

Mega CAB Collection (http://rapidshare.com/files/202233966/NATF_One_Big_CAB_Collection__24-Feb-09_.zip) - For non-Rapidshare Premium users. UPDATED: 24-Feb-09

[oaa8]

Ditto. Looks like we found the first bug. Other than that everything seems to be working well so far. I will wait until the bug with TF3d is fixed before upgrading to the latest release of Fuzeberry as I really need to edit the order of the tabs.

Thanks for the hard work Todd. In addition to being a master chef, you are also one of the kindest folks on the forum. YOU ROCK!!!

I got the TF3d config to work by installing cab other than the one I had tried before. I don't know the difference but it now works. I think this is the one I installed.

[Arju007]

I got the TF3d config to work by installing cab other than the one I had tried before. I don't know the difference but it now works. I think this is the one I installed.

i can confirm that the cab you found works .. thank you buddy ;)

[jentech]

Radios:

Because radio performance tends to vary greatly from area to area, I do not include one with any of my ROMs. You can flash any Raphael radio to your Fuze/Touch Pro, and if your phone is security unlocked, you can also flash radios from the Diamond, Blackstone, Xperia, and a few other HTC devices.



UC: (User Customization)

These ROMs are UC Compatible. If you are not familiar with UC, check out the this thread (http://forum.xda-developers.com/showthread.php?t=366337) for details. PLEASE NOTE: UC runs automatically upon Initial Customization finishing. Your phone will automatically reset after about 1 minute.



Changelog:

[From v3.2 -> v4.0]



New splash screen.
New 21009 OS build. (ported by Da_G)
Even more storage memory available! (~360MB Lite, ~340MB Standard)
Added Touch Response (device vibrate upon screen tap/touch, not tested)
Added Upload to Facebook/YouTube (not tested)
Updated HTC Album to latest Blackstone version.
Updated HTC Volume Control
Updated rilphone.dll to allow Rogers/Fido Caller ID to work correctly. (not able to test)
I'm sure there's more, but I cannot remember right now...



Hi NATF, I'm with Rogers but am using a Touch HD. I just have a question, including this rilphone.dll has no ill effect on your non Rogers/Fido phone?? I am hoping to convince someone in the Blackstone forum to cook this in their ROM. I've tried it myself and it does work, but my cooking skills are poor at best and my ROM does not perform well...

[josbald1975]

NATF,
2 bugs I've come across so far.
1st, When i set the phone to vibrate via the touch screen, then nothing will save when it closes and remains with the previous system and ring volume. when i set the volume with the hard keys to silent or vibrate, then it will save the desired state but the top-nav icon displays remains as if sound is active/allowed.
behavior changed after soft reset, as previously it would display the silent mode for vibrate or silent.
2nd, Haptic feedback is very random and has only vibrated a handful of times during all my setup and usage since midnight

[atsitalian]

i can confirm that the cab you found works .. thank you buddy ;)

Additional confirmation.... Thanks a bunch

[NFRCER]

NATF,
2 bugs I've come across so far.
1st, When i set the phone to vibrate, the top-nav icon displays Silent, sometimes it saves as silent, and sometimes as vibrate, and sometimes it ignores my change and stays with system and ring volume unchanged. in anycase, it never displays the vibrate function icon.
2nd, Haptic feedback is very random and has only vibrated a handful of times during all my setup and usage since midnight

Bump. Same problems here, I can wait though. Thnx for the given to the community NATF

[kreep22]

thanks for the great rom NATF, i just got a question. i tried to us the Cellular Video that you have on the Lite version of the 4 series and everytime i try to view a video it tells me

"the file 'streamingplayer' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem presists, try reinstalling or restoring this file"

just wanted to know if you even knew about it and if there was a fix for it in the works or if there already is. thanks for everything

[xcsdm]

v4 is my favorite to date. I do have a couple of problems, I think some of these were mentioned before, but I'll list them for the sake of making sure...

First, The volume control/levels seem very speratic. Sometimes it registers, sometimes it doesn't seem to save what I select. Most often, it appears not to save.

Second, Was the modified task bar (the one that popped up a window with buttons for each taskbar item) taken out for a reason? I really miss this feature. My fat fingers don't keep hitting the wrong icon when I'm trying to make changes.

Third, TF3D Config fails to start.

XC

[karn101]

v4 is my favorite to date. I do have a couple of problems, I think some of these were mentioned before, but I'll list them for the sake of making sure...

First, The volume control/levels seem very speratic. Sometimes it registers, sometimes it doesn't seem to save what I select. Most often, it appears not to save.

I hope this gets fixed soon. Maybe an issue with the new build?

Second, Was the modified task bar (the one that popped up a window with buttons for each taskbar item) taken out for a reason? I really miss this feature. My fat fingers don't keep hitting the wrong icon when I'm trying to make changes.

This is a killer. I def. need that. Which version did you download? Fuze/TouchPro - Lite/Standard?


Third, TF3D Config fails to start.

XC

A working version of TF3D was found a few posts above yours.

[Da_G]

I've done some looking into the audio issue, and it appears to be an API change by msoft.. this is a beta build per some digging so it's not likely there will be a fix for this unless msoft put in a registry flag to toggle the old behavior.. looking for that..

[nableezy]

anybody having issues with activesync, no matter what I try I get an error code 0x80070008. Other internet seems to be working, just this.

[techman28]

thanks for the great rom NATF, i just got a question. i tried to us the Cellular Video that you have on the Lite version of the 4 series and everytime i try to view a video it tells me

"the file 'streamingplayer' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem presists, try reinstalling or restoring this file"

just wanted to know if you even knew about it and if there was a fix for it in the works or if there already is. thanks for everything

I haven't tried out NATF's lite versions, but is it possible that the streaming player was not included in the lite version?

[Lostwarriorram]

anybody having issues with activesync, no matter what I try I get an error code 0x80070008. Other internet seems to be working, just this.

Man, this is something which needs to be fixed or confirmed not true before I could flash the new version.

[nableezy]

anybody having issues with activesync, no matter what I try I get an error code 0x80070008. Other internet seems to be working, just this.

Nevermind, just started working out of nowhere :D

[tadevinney]

Findings

1: TF3D mail tab showing an extra mail envelope
2. Exchange mail account tab not giving an email count (non exchange email tab is)

Gps is working great for me

Just had the video share added on my plan.. just need to test it.

MSVC is working. Previously have had issues that others didnt with Incoming call announcing. Using A2DP and all seems good.

Sounds have changed. kinda liked having the obnoxious alarms to get my lazy butt out of bed.. not an issue just observed.

Thanks NATF for another great ROM. It is a sign of a great COOK to have the entire XDA site go down everytime NATF puts out a new ROM..

sensitivity on the outer ring is insane. just brusing up it will move the cursor

[rddcarlos]

Thanks for the new Rom NATF, i got to download last night

installed rom last night and have been testing for most of the night and morining... so far found the above mentioned bug with the tf3d config and the volume icon on top dosent change...

also after i soft reset am getting the "logon to sever window" asking me for user name and password and domain for media net ... i think it has something to do with the data connection in (communications) its not working it says "no data connection exists" but when i update the weather or go on opera it connects... but i can't connect to data using comm manager...

about the GPS im using google maps with street view and since NATF v3.0 i cant get a gps lock on it and the blue dot dosent work at all not sure whats going on there but i tried every fix i could find notting seems to work... :( any help here is Greatly Appreciated....

aslo when ever i try to add to the people tab it crashes it crashed on me like 3 times and when it crashes notting works i have to take out the battery to reset it...

i also noticed something different, when you turn on your Fuze is everyone getting this pic "NATF Touch Pro Series" i thought i might have flashed the touch pro rom instead of the fuze one, also the icon for the rom is not the same as in all his other ones its not custom ruu with the fuze icon its a Raphael Wrapper with some blue icon, not sure if it has anything to do but i'll wait for everyone's thoughts on this

agian Thanks for all your hard work NATF......

[rareness4]

First time using spb backup with switching ROMS and it switched over perfectly. Also in this version its noticeably faster than 3.2.

ActiveSync works for me.

Great ROM so far, still testin it out.

Thanks alot :)

[greg_brandon]

Hi Im New To This And Want To Use Your Rom Rather Than The Default o2 Rom On The XDA Serra.

I have run the RaphaelWrapper.exe that comes with RAPHIMG.nbh but every time it errors one the phone goes to the rainbow screen.

Please help regards

Greg

[nableezy]

Nevermind, just started working out of nowhere :D

Well seems as though I spoke prematurely (twice now). I can sync from pOutlook if I have no subfolders set to sync, I cannot sync from activcesync at all, if I have just email to sync I get the 0x80070008 error, with the calendar I get 0x80070057 (I guess permission denied which I dont get at all) Didnt have any problems with 3.2, anybody else experiencing something similar if trying to sync more than just the inbox?

[tadevinney]

anyone else having sms issues? the messages appear on TF3D but do not appear in the Messages Inbox

[nitroblu]

i agree on the sound thing, it can be quite an issue
ieven tried using the "Ringer" option in comm manager, doesn't always register either :(

[Captain_Throwback]

Well seems as though I spoke prematurely (twice now). I can sync from pOutlook if I have no subfolders set to sync, I cannot sync from activcesync at all, if I have just email to sync I get the 0x80070008 error, with the calendar I get 0x80070057 (I guess permission denied which I dont get at all) Didnt have any problems with 3.2, anybody else experiencing something similar if trying to sync more than just the inbox?

I'm trying to sync to an Exchange Server, and I'm also getting an error. Also, I'm trying to Hard Reset, to see if that'll fix the issue, and its not working!

EDIT: I'm going to re-flash and see if that fixes anything.

EDIT2: Just reflashed, and I still get the 0x80070008 error when trying to sync to the Exchange server. I'm going to have to return to 3.2, since all of my Contacts, Calendar, etc are stored on that server.

[rddcarlos]

Hi Im New To This And Want To Use Your Rom Rather Than The Default o2 Rom On The XDA Serra.

I have run the RaphaelWrapper.exe that comes with RAPHIMG.nbh but every time it errors one the phone goes to the rainbow screen.

Please help regards

Greg

did you do a Hard-SPL if not you have to do that 1st.....

if you havent go here http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL

[phid_bombadier]

Thanks NATF for all the hard work!

I've been stepping through all of the versions and v4.0 is definately an improvment over 3.2. Perf is up along with usability. I was having some delay and interaction hiccups with 3.2 but 4 cleans them all up.

So far IE feels better as well. No problems with GPS.

This is the way it should have been from the store! :)

Thanks again!
--Mike

[josbald1975]

Second, Was the modified task bar (the one that popped up a window with buttons for each taskbar item) taken out for a reason? I really miss this feature. My fat fingers don't keep hitting the wrong icon when I'm trying to make changes.

XC

with or without TouchFlo enabled, unable to check the 3rd box in Settings/System: TouchFLO for the "Show System Status screen when status icons are tapped"

for the other guy who asked - the Fuze v4 Standard also has the new/updated welcome screen

no problems connecting with WMDC on Vista
and my SMS/MMS displays in touchflo normally

[oaa8]

2nd, Haptic feedback is very random and has only vibrated a handful of times during all my setup and usage since midnight

I noticed this as well but it's most likely going off every time you touch but it's to soft and quick for you to feel it. Change the value in your touch response all the way up and you can test whether it works but of course it will be a ridiculously long vibrate for each touch. I had mine on 15ms which worked well for me before I decided I did not need it.

Second, Was the modified task bar (the one that popped up a window with buttons for each taskbar item) taken out for a reason? I really miss this feature. My fat fingers don't keep hitting the wrong icon when I'm trying to make changes.

I don't know of a fix but it seems similar to the problem in v3.1 where one could not change the ring tones due to the DRM or something like that. The setting just reverts back when OK is pressed.

[ryan6603]

Well seems as though I spoke prematurely (twice now). I can sync from pOutlook if I have no subfolders set to sync, I cannot sync from activcesync at all, if I have just email to sync I get the 0x80070008 error, with the calendar I get 0x80070057 (I guess permission denied which I dont get at all) Didnt have any problems with 3.2, anybody else experiencing something similar if trying to sync more than just the inbox?

i had a similar experience with the v3.xx. I had to set the exchange up from the phone and then the sync worked. I also had to add the sub-folders from the phone too. Inbox>>Tools>>Manage Folders

[Captain_Throwback]

i had a similar experience with the v3.xx. I had to set the exchange up from the phone and then the sync worked. I also had to add the sub-folders from the phone too. Inbox>>Tools>>Manage Folders

I set mine up from the phone, and its still not synchronizing. I connected it to the computer to see if it would through there, and it doesn't work that way either.

And I still can't hard reset, either. It only soft resets no matter what I do.

[y2whisper]

I happened to set my exchange account up from my device and it worked, sorry, if i read it sooner i would have set it up from my computer to test.

Haptic feedback is very random, to change the settings (or turn it off) go to start/settings/system/touch response settings

[nableezy]

I set mine up from the phone, and its still not synchronizing. I connected it to the computer to see if it would through there, and it doesn't work that way either.

me too, once it downloads folder list craps out

[ryan6603]

Well seems as though I spoke prematurely (twice now). I can sync from pOutlook if I have no subfolders set to sync, I cannot sync from activcesync at all, if I have just email to sync I get the 0x80070008 error, with the calendar I get 0x80070057 (I guess permission denied which I dont get at all) Didnt have any problems with 3.2, anybody else experiencing something similar if trying to sync more than just the inbox?

I set mine up from the phone, and its still not synchronizing. I connected it to the computer to see if it would through there, and it doesn't work that way either.

And I still can't hard reset, either. It only soft resets no matter what I do.

have you tried going to settings>>connections>>USB to PC>> then make sure activeSync is checked when connected. if so try unchecking (or checking if uncheked) Enable advanced network Func

[Captain_Throwback]

have you tried going to settings>>connections>>USB to PC>> then make sure activeSync is checked when connected. if so try unchecking (or checking if uncheked) Enable advanced network Func

The phone is definitely connected to the computer through Activesync when I tried it that way. That doesn't change the fact that its not working from the phone, as it always has.

I finally got my phone to hard reset. I had to leave it attached to the computer for it to register the Volume Down button properly. For some reason it just wouldn't work otherwise. Now to see if that makes a difference . . .

[nableezy]

have you tried going to settings>>connections>>USB to PC>> then make sure activeSync is checked when connected. if so try unchecking (or checking if uncheked) Enable advanced network Func
yup, still same problem, from either usb activesync (both xp and vista) or from ota. Have hard reset and set up exchange prior to any other installations, still no luck.

[dacho]

My exchange works as it should no problems there. I have set the exchange up from the phone via settings file. Only problem I have is the volume not working properly but that's about it. Rom seem to be the fastest I have used thus far excluding lite version of da_g. Thanks and looking forward for the volume fix. Another quick question how do I change the predictive text to the original wm?

[prisoner881]

yup, still same problem, from either usb activesync (both xp and vista) or from ota. Have hard reset and set up exchange prior to any other installations, still no luck.

I'm getting OTA ActiveSync just fine with my Exchange 2007 server. Push mail works great. Do you have a valid cert on your Exchange server?

[tadevinney]

I'm getting OTA ActiveSync just fine with my Exchange 2007 server. Push mail works great. Do you have a valid cert on your Exchange server?

did you see an extra mail icon on the TF3D mail screen

[nableezy]

I'm getting OTA ActiveSync just fine with my Exchange 2007 server. Push mail works great. Do you have a valid cert on your Exchange server?

Yeah, it downloads the security policies fine, and it was working as of 3 am (Central) before I did the 4.0 flash, so I don't think the server is the problem

[ryan6603]

FYI: in addition to hosting mirror for just Fuze standard, for v4 i have also have a mirror for TP standard. both are up and ready on 4-DL server sites.
http://compservpro.com/NATF

[tadevinney]

anyone else having sms issues? the messages appear on TF3D but do not appear in the Messages Inbox

If I start the SMS message they appear fine but if I receive a text it only shows on the TF3D screen. . any thoughts

[NotATreoFan]

Hi NATF, I'm with Rogers but am using a Touch HD. I just have a question, including this rilphone.dll has no ill effect on your non Rogers/Fido phone?? I am hoping to convince someone in the Blackstone forum to cook this in their ROM. I've tried it myself and it does work, but my cooking skills are poor at best and my ROM does not perform well...

I haven't noticed any issues myself. I had the DLL cooked into my test version for almost a week...

NATF,
2 bugs I've come across so far.
1st, When i set the phone to vibrate via the touch screen, then nothing will save when it closes and remains with the previous system and ring volume. when i set the volume with the hard keys to silent or vibrate, then it will save the desired state but the top-nav icon displays remains as if sound is active/allowed.
behavior changed after soft reset, as previously it would display the silent mode for vibrate or silent.
2nd, Haptic feedback is very random and has only vibrated a handful of times during all my setup and usage since midnight

See Da_G's post about the sound issue. He's a lot better in the registry then me, so hopefully he finds a magic fix. :)

Haptic Feedback is very sporadic for me too.

thanks for the great rom NATF, i just got a question. i tried to us the Cellular Video that you have on the Lite version of the 4 series and everytime i try to view a video it tells me

"the file 'streamingplayer' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem presists, try reinstalling or restoring this file"

just wanted to know if you even knew about it and if there was a fix for it in the works or if there already is. thanks for everything

Streaming Media is not in the Lite ROM. As soon as I have time to CAB it up, I'll post it. Otherwise, you should be able to locate a compatible version in Da_G's ROM thread.

v4 is my favorite to date. I do have a couple of problems, I think some of these were mentioned before, but I'll list them for the sake of making sure...

Second, Was the modified task bar (the one that popped up a window with buttons for each taskbar item) taken out for a reason? I really miss this feature. My fat fingers don't keep hitting the wrong icon when I'm trying to make changes.

XC

Working on this. Can someone remind me what this feature was called? :confused:

I've done some looking into the audio issue, and it appears to be an API change by msoft.. this is a beta build per some digging so it's not likely there will be a fix for this unless msoft put in a registry flag to toggle the old behavior.. looking for that..

Work your magic...

anybody having issues with activesync, no matter what I try I get an error code 0x80070008. Other internet seems to be working, just this.

No problems with WMDC. I don't have an XP box to try ActiveSync.

Thanks for the new Rom NATF, i got to download last night

installed rom last night and have been testing for most of the night and morining... so far found the above mentioned bug with the tf3d config and the volume icon on top dosent change...

also after i soft reset am getting the "logon to sever window" asking me for user name and password and domain for media net ... i think it has something to do with the data connection in (communications) its not working it says "no data connection exists" but when i update the weather or go on opera it connects... but i can't connect to data using comm manager...

about the GPS im using google maps with street view and since NATF v3.0 i cant get a gps lock on it and the blue dot dosent work at all not sure whats going on there but i tried every fix i could find notting seems to work... :( any help here is Greatly Appreciated....

aslo when ever i try to add to the people tab it crashes it crashed on me like 3 times and when it crashes notting works i have to take out the battery to reset it...

i also noticed something different, when you turn on your Fuze is everyone getting this pic "NATF Touch Pro Series" i thought i might have flashed the touch pro rom instead of the fuze one, also the icon for the rom is not the same as in all his other ones its not custom ruu with the fuze icon its a Raphael Wrapper with some blue icon, not sure if it has anything to do but i'll wait for everyone's thoughts on this

agian Thanks for all your hard work NATF......

No problems with data here, GPS is great, and that is my new splash screen I mentioned.

anyone else having sms issues? the messages appear on TF3D but do not appear in the Messages Inbox

Not seeing this. I've received a few texts, and they're showing up in the inbox.

yup, still same problem, from either usb activesync (both xp and vista) or from ota. Have hard reset and set up exchange prior to any other installations, still no luck.

I don't use Exchange, but regular syncing is working fine with WMDC.

[Captain_Throwback]

Yeah, it downloads the security policies fine, and it was working as of 3 am (Central) before I did the 4.0 flash, so I don't think the server is the problem

Mine was also working fine prior to flashing the new ROM. My company still uses Exchange 2003, though. That couldn't be part of the issue, could it? It doesn't seem like the server is enforcing the security policy on my phone like it usually does.

[NotATreoFan]

If anyone has access to a fast webserver with 600+ GB/mo traffic, and ~15GB storage, please PM me.

I've got a domain name all ready to go, so hopefully I can use it to redirect everyone to my ROMs.

[prisoner881]

A couple of oddities:

1. I enable WiFi in the Comm. Mgr. screen. It comes on...for a few seconds, then immediately turns itself off. Anyone else seeing this?

2. Also in Comm. Mgr., I've got MS Direct Push mail on but the data connection slider shows "Off." This is weird because I'm having no problems at all surfing with Opera. The stock AT&T ROM showed both "Direct Push" and "Data Connection" as enabled whenever I was surfing.

[josbald1975]

[QUOTE=NotATreoFan;3125302]
Working on this. Can someone remind me what this feature was called? :confused:

QUOTE]

I think this is the Settings/System: TouchFLO - "Show Systems Status screen" - because i normally disable it... in the v4 build i didn't have to disbale it since it won't allow you to use it. maybe you deleted a registry setting?

QUOTE= prisoner881:
tested wifi and it connected to a security enabled service and didn't drop after 5 min. so no issue with wifi here.

[btprice2001]

NATF,
2 bugs I've come across so far.
1st, When i set the phone to vibrate via the touch screen, then nothing will save when it closes and remains with the previous system and ring volume. when i set the volume with the hard keys to silent or vibrate, then it will save the desired state but the top-nav icon displays remains as if sound is active/allowed.
behavior changed after soft reset, as previously it would display the silent mode for vibrate or silent.
2nd, Haptic feedback is very random and has only vibrated a handful of times during all my setup and usage since midnight

The volume issues are related to the 21009 SYS. See Da_G's thread starting here:

http://forum.xda-developers.com/showthread.php?t=446652&page=109

[Superguy]

I'll figure I'll throw in my 2 cents on here.

I'm liking the ROM over 2.3 (last one I flashed) overall.

A few bugs I noticed:

It's really laggy (like stock rom laggy) until Advanced Config is run. Fortunately, I have the file saved. Once I loaded that and rebooted things were a lot better. Didn't seem to remember that with 2.2 or 2.3.

The other one I noticed was after restoring a backup with PPCPimBackup. I have a lot of text messages (mainly ones I'm keeping for evidence against my ex-wife :D) and it didn't import them correctly. In some cases, it found a bunch of texts I supposed tried to send but never did. It looked like it was trying to rethread them and was coming up with a bunch of seeming random texts that didn't resolve until I clicked the thread. Saw a lot of activity at the bottom of the screen, like it was scanning threads or something. Didn't have this in 2.2 or 2.3.

Can't get it to synch with Exchange, but I'm thinking that's more with my server than anything else for right now.

I noticed the rooster alarm was a bit quiet. Mine worked at least, but it was noticeably quiet. Can anything be done with speaker volume (both in call and sounds)? I know that volume isn't necessarily a rom issue, but if anyone can point me to a solution that works I'd appreciate it (already tried the .csv file one and it didn't help).

Haptic program doesn't seem to be working. I know you didn't test it, but thought I'd let you know and to see if anyone else has noticed that.

Nice rom overall, NATF! Thanks!

Now I just gotta change that clock ... :D

Super

[FU5 KONA]

Hey NATF! Great roms....one problem though...I just dL'd your newest ROM v4.....and when I go to flash it goes into the colored screen then to the grey one that usually has the statis for the flash. On the grey one it says " No Image" and then back to bootloader screen it goes?!?! Any ideas? I have flashed All my PDA's since the Hermes and have never seen this.

[AvengerBB]

The volume issues are related to the 21009 SYS. See Da_G's thread starting here:

http://forum.xda-developers.com/showthread.php?t=446652&page=109

Looks like he put together a 20954 SYS that fixes the issue.. NATF? :):)

[tadevinney]

If I start the SMS message they appear fine but if I receive a text it only shows on the TF3D screen. . any thoughts

A hard reset fixed this issue.. also seems to have fixed the extra mailbox issue and I now have email count on the TF3D. Back to testing. Sorry for the scare. all looks good.

[nableezy]

Yeah, it downloads the security policies fine, and it was working as of 3 am (Central) before I did the 4.0 flash, so I don't think the server is the problem

I think I may have solved my problem by hard resetting without my user cust, and then setting up exchange sync. Not sure which cab was causing my problem, will be installing 1 at a time and testing ota sync and report back.

[brizbaine]

A couple of oddities:

1. I enable WiFi in the Comm. Mgr. screen. It comes on...for a few seconds, then immediately turns itself off. Anyone else seeing this?


Prisoner,

Is that happening while you're connected to ActiveSync? That's how it works normally. If you're connected through ActiveSync it already has an internet [and network] connection so it turns wifi off by itself. Disconnect from AS and the wifi should stay on.

[josbald1975]

does anyone know how to tweak the following?
1. how do I get predictive text back for SMS/MMS when typing in the Contact To: name? this was a nifty feature before..
2. how can i display IE favorites within Opera? NATF said previously there was a line in the opera.ini file but i couldn't figure it out...

[r4ster]

Hi, I have just hard-spled my device and flashed my htc with newest natf rom, but, after setting proper date, I seem to get a "This concludes the beta test of this software release..." what shall I do now ?

[Captain_Throwback]

I think I may have solved my problem by hard resetting without my user cust, and then setting up exchange sync. Not sure which cab was causing my problem, will be installing 1 at a time and testing ota sync and report back.

That's curious. I didn't do any UC, and mine still isn't working. I'm flashing back to 3.2, and hopefully it starts working again. If not, I know its not the ROM, at least.

[Bizybone]

Great Rom NATF, I'm not being plagued with any of the bugs that everyone else is so far (knocks on wood). GPS fix is as fast as its ever been, lol the minute I turned on GPS test I was already locked on to atleast 7 Satellites while sitting in the parking lot.

Thanks NATF and Da G.

And for those missing the large Title Bar, I believe you want to use the Enlarge Title Bar cab, I grabbed it from Da G's thread.

[FU5 KONA]

Hey NATF! Great roms....one problem though...I just dL'd your newest ROM v4.....and when I go to flash it goes into the colored screen then to the grey one that usually has the statis for the flash. On the grey one it says " No Image" and then back to bootloader screen it goes?!?! Any ideas? I have flashed All my PDA's since the Hermes and have never seen this.

I found the Kaiser fix for this....shou;d that work for the Fuze? I don't understand I have flashed 2 of your previous ROMs to my Fuze without a problem? Anyone have any ideas? And this is happening when flashing by usb not sd card.

[Bizybone]

Alright... HTC Enlarge Title Bar Attached.

[TriAxisFL]

I'm having a weird soft-reset issue. Whenever I have Windows Media Player playing songs, If I do anything with the volume control buttons or click on the volume icon in the top bar,,, my phone soft resets. I did hard reset after burn and it still happens. Anyone else having this problem??? I think it happens when I have my volume turned all the way up.

Besides this issue the ROM is working great. I haven't had time to test MSVC over BT or GPS yet. But other minor bugs I faced in other peeps ROMS are gone, Yay!

[entropy42]

If anyone has access to a fast webserver with 600+ GB/mo traffic, and ~15GB storage, please PM me.

I've got a domain name all ready to go, so hopefully I can use it to redirect everyone to my ROMs.

How about using bitTorrent to distribute the load?

[prisoner881]

A couple of oddities:

1. I enable WiFi in the Comm. Mgr. screen. It comes on...for a few seconds, then immediately turns itself off. Anyone else seeing this?

2. Also in Comm. Mgr., I've got MS Direct Push mail on but the data connection slider shows "Off." This is weird because I'm having no problems at all surfing with Opera. The stock AT&T ROM showed both "Direct Push" and "Data Connection" as enabled whenever I was surfing.

OK, I feel like a complete tool now. I had the phone still plugged into USB, which mucks up item #2. I going to guess item #1 is also related, as unplugging the USB makes WiFi act normally.

On another note, I had something really strange just happen. I surfed Opera over to http://www.hardocp.com/. The page has a fair amount of Flash on it and was loading slowly, so I set the phone down to wait and surfed on my PC.

While I was waiting, my Fuze rebooted itself! No warning, no nothing, it just buzzed a second (as if I'd just turned it on) and I got NATF's splash screen. Even stranger, when it came back up, the soft keyboard settings had altered themselves from "Full QWERTY" to "Compact QWERTY". I've reset the keyboard settings and surfed back to [H]ardOCP without incident since, but I thought the incident worth mentioning.

[nableezy]

That's curious. I didn't do any UC, and mine still isn't working. I'm flashing back to 3.2, and hopefully it starts working again. If not, I know its not the ROM, at least.

do you have wktask installed? the only thing I have seen make a difference for me is that. On a soft-reset (i have it set to run on startup) activesync ota fails, if i exit wktask it works, and when i restart wktask it still works. all this has me saying wtf is going on with wktask, but that is the only thing that has made a difference for me

[Noonski]

http://forum.xda-developers.com/attachment.php?attachmentid=143516&stc=1&d=1231186584
http://forum.xda-developers.com/attachment.php?attachmentid=143514&stc=1&d=1231186361

This started to annoy me in my own Roms on VGA devices, So i fixed this little Lazy Detail from MS Side.

Like the new Splash screen.

1 Pro on the new build that i found on the 3.2 build and is gone now.
The Overal touch response is better now. In previous version 3.2 the programs folder didn't always react to the presses on apps.

Let's see what else can be scratched.

Advanced Config did not Crash with me on the Pro Standard version.
But it has difficulties enabling the Missed Calls Tab, as in not enabling it.

Touch Response set to 10ms has less effect on the Pro then it has on the Diamond.
15ms starts giving a minimal effect with me (and upwards) the Pro is heavier that's why the effect is to little to notice.

So depending on what people think of it, it might be smarter to disable it by default and up the Values a bit.

[HKEY_CURRENT_USER\Software\Snailslug\TouchResponse]
"Duration"=dword:0000000f = 15ms
or
"Duration"=dword:00000014 = 20ms
"LedId"=dword:00000001
"DisabledWhileSilent"=dword:00000001
"Enabled"=dword:00000000
"DisabledDuringCall"=dword:00000001

[Smalls2]

Sounds like I may wait a bit before I install v4.0

[nableezy]

Sounds like I may wait a bit before I install v4.0

wheres the fun in that? :)

[kreep22]

ok, i changed from the 4.0 lite to the 4.0 standard and everything is working fine except for a couple of things, first is when i try to stream videos it tells me that "file re-entry not allowed" do i have to set it up some how or something. and the other thing is that i cant seem to add some of my contacts on the contacts tab on the TF3D

[Kahnighticus]

I'm running v3.2 and I've found if I try launching the Blue Tooth Explorer the phone just freezes, and requires me to hit the reset button to get the phone to come back. Is anyone else having this issue?

[Superguy]

Ok, haptic works fine. The times were in ms and I had them too short. So user error on that one. :D

Diamond Config crashed on me though.

[Smalls2]

wheres the fun in that? :)


:) Well I HAVE to have my Outlook email pushed for work.

[nableezy]

:) Well I HAVE to have my Outlook email pushed for work.

I got mine working after all the trouble I had, Captain_Throwback hasnt been so lucky though. I would say try it but make a backup of your old rom with sprite, so if you need to you can quickly go back. da_g's rom thread has a link for sprite backup

[Captain_Throwback]

I got mine working after all the trouble I had, Captain_Throwback hasnt been so lucky though. I would say try it but make a backup of your old rom with sprite, so if you need to you can quickly go back. da_g's rom thread has a link for sprite backup

No, I haven't. I flashed back to 3.2 to confirm it was working, and just re-flashed to 4.0. Now, in the Comm Manager (which looks much nicer than in previous version, btw), I can't toggle on MSDP or the Data Connection. The BT and WiFi toggles work fine, though. And if I open a Web Browser, Data will connect, and then show as connected in Comm Manager, and I can toggle it off, but not back on.

EDIT: Now, when I try to open Activesync, it immediately closes. I guess I'll soft reset again and see if that helps.

[Smalls2]

I got mine working after all the trouble I had, Captain_Throwback hasnt been so lucky though. I would say try it but make a backup of your old rom with sprite, so if you need to you can quickly go back. da_g's rom thread has a link for sprite backup


Found it, thanks.

Maybe I will try it. :D

[Noonski]

Mondilv's got a nice thread to where he has some new Sys and XIP versions.

He's got version 21109 don't know if that's a test build to though.


http://forum.xda-developers.com/showthread.php?t=452184

[skyfox99]

When are the updated CABs going to be posted?

[nableezy]

No, I haven't. I flashed back to 3.2 to confirm it was working, and just re-flashed to 4.0. Now, in the Comm Manager (which looks much nicer than in previous version, btw), I can't toggle on MSDP or the Data Connection. The BT and WiFi toggles work fine, though. And if I open a Web Browser, Data will connect, and then show as connected in Comm Manager, and I can toggle it off, but not back on.

I think the errors I was getting were related to memory, I have all the tf3d tweaks to use the max to make it as smooth as possible. When I added them after my last hard reset, I couldnt get as ota working again, disabled one (FATFS cachesize from 32764 back to 16384) and it is working again. Id look at any tweaks you are using that take more memory than default

[TVDinner]

I am using an older version of NATF's ROM and everything works well. I MUST have my emails and activesync working correctly for work, so the recent posts are a concern. I am going to wait until NATF posts about this issue.

[Captain_Throwback]

I think the errors I was getting were related to memory, I have all the tf3d tweaks to use the max to make it as smooth as possible. When I added them after my last hard reset, I couldnt get as ota working again, disabled one (FATFS cachesize from 32764 back to 16384) and it is working again. Id look at any tweaks you are using that take more memory than default

I haven't tweaked anything. I've literally been flashing the ROM, then immediately setting up the Exchange server on the device. And it hasn't worked once. Its as if its not even connecting to the server, because I don't even get the prompt telling me that my Exchange server has to enforce security policy on my device (and I know I'm connected to the internet, because my Web browsers work fine).

[tadevinney]

Can anyone confirm if Video Share is working? Is there anything special I need to do on Fuze to enable it?

[NotATreoFan]

It's really laggy (like stock rom laggy) until Advanced Config is run. Fortunately, I have the file saved. Once I loaded that and rebooted things were a lot better. Didn't seem to remember that with 2.2 or 2.3.


Really? I find the ROM to be quite snappy.

Hey NATF! Great roms....one problem though...I just dL'd your newest ROM v4.....and when I go to flash it goes into the colored screen then to the grey one that usually has the statis for the flash. On the grey one it says " No Image" and then back to bootloader screen it goes?!?! Any ideas? I have flashed All my PDA's since the Hermes and have never seen this.

This is normal. If you have an SD card in the phone, the bootloader always checks it for an image.

Looks like he put together a 20954 SYS that fixes the issue.. NATF? :):)

Looking at it now. ;)

A hard reset fixed this issue.. also seems to have fixed the extra mailbox issue and I now have email count on the TF3D. Back to testing. Sorry for the scare. all looks good.

Good to hear it's working OK.

does anyone know how to tweak the following?
1. how do I get predictive text back for SMS/MMS when typing in the Contact To: name? this was a nifty feature before..
2. how can i display IE favorites within Opera? NATF said previously there was a line in the opera.ini file but i couldn't figure it out...

1. Turn off T9 using the onscreen keyboard, and then it will work again.
2. Opera uses it's own bookmark file.

Hi, I have just hard-spled my device and flashed my htc with newest natf rom, but, after setting proper date, I seem to get a "This concludes the beta test of this software release..." what shall I do now ?

Anyone else see this? The ROM is set to obtain date and time from the network automatically.

Alright... HTC Enlarge Title Bar Attached.

Thank you!!

I'm having a weird soft-reset issue. Whenever I have Windows Media Player playing songs, If I do anything with the volume control buttons or click on the volume icon in the top bar,,, my phone soft resets. I did hard reset after burn and it still happens. Anyone else having this problem??? I think it happens when I have my volume turned all the way up.

Just tested it myself, and the phone did not soft reset.

-Note to self- Don't let WMP shuffle songs... co-workers stare when the Ducktales theme starts blasting out of your phone...

How about using bitTorrent to distribute the load?

I would consider it, but Verizon seems to be throttling my uploads when using common BT ports. :(

When are the updated CABs going to be posted?

I'm working on it, I promise. I've just been swamped with a lot of stuff lately.

Can anyone confirm if Video Share is working? Is there anything special I need to do on Fuze to enable it?

As long as you have Video Share on your account, tapping the Video Share icon in the dialer should work. I can't confirm this since I don't use Video Share, and all my frenemies have Verizon.

[NotATreoFan]

Anyone having Exchange issues, please post some specifics about your server configuration. i.e: Exchange version, and when it last worked.

My company uses Exchange, but will not let anything non-Blackberry connect to it, so I cannot test it.

[josbald1975]

fyi, upload to Facebook for pictures works like a charm

[Captain_Throwback]

Anyone having Exchange issues, please post some specifics about your server configuration. i.e: Exchange version, and when it last worked.

My company uses Exchange, but will not let anything non-Blackberry connect to it, so I cannot test it.

I'm relatively certain my company uses Exchange 2003. It worked with the 3.2 ROM (this morning), and when I flashed back to 3.2 (this afternoon) after it wasn't working on 4.0, it again worked. I'm back on 4.0 and its not working again. So, to summarize, it hasn't worked since I've been on 4.0. I'm also trying to just sync to my local computer, and that's not working either. I've soft and hard reset several times. Unfortunately, since no one else seems to be having this problem, I guess it'll be tough to troubleshoot. The Sync soft key actually stops working. it acknowledges that I'm pushing it, but doesn't do anything.

Is anyone else seeing the issues with the Comm Manager toggles for MSDP and Data not allowing you to turn them on?

[FU5 KONA]

Thanks NATF. I ended up using the SD card method and had no issues! That will be my routine from now on! Thanks again!

[NotATreoFan]

I'm relatively certain my company uses Exchange 2003. It worked with the 3.2 ROM (this morning), and when I flashed back to 3.2 (this afternoon) after it wasn't working on 4.0, it again worked. I'm back on 4.0 and its not working again. So, to summarize, it hasn't worked since I've been on 4.0. I'm also trying to just sync to my local computer, and that's not working either. I've soft and hard reset several times. Unfortunately, since no one else seems to be having this problem, I guess it'll be tough to troubleshoot.

Anyone else using Exchange 2003? I'm wondering if that is the root cause... maybe something to do with the Office 2007-ish setup of the newer OS builds.

[Bizybone]

Thank you!!



No no no...Thank you!

ID #41S17625NG800313U

My contribution is long overdue.

Thanks Todd.

[Captain_Throwback]

Anyone else using Exchange 2003? I'm wondering if that is the root cause... maybe something to do with the Office 2007-ish setup of the newer OS builds.

I'll bet that's what it is. Figures too. I work for a technology company and they won't even update their Exchange servers.

There must be some sort of workaround . . .

[PTzero]

Anyone else using Exchange 2003? I'm wondering if that is the root cause... maybe something to do with the Office 2007-ish setup of the newer OS builds.
I use Exchange Server 2007 and have no problems, so it's possible the problem is related to Exchange 2003.

[josbald1975]

1. Turn off T9 using the onscreen keyboard, and then it will work again.
2. Opera uses it's own bookmark file.



I turned off T9 in Compact Qwerty, full Qwerty, etc. but i use the "Keyboard" input method on the touchscreen and it doesn't suggest like it used to. (edit) - I found the cab to disable t9 instead of just turning it off - and now it works fine!

On my old Tilt when i installed Opera, the IE favorites appeared within Opera in a bookmarked Folder. when i ran your v5 ROM they no longer appeared, and i haven't been able to figure it out since. if this is not to be, then where are the Opera bookmarks stored? file/path. thanks!

[mchapman007]

I use Exchange Server 2007 and have no problems, so it's possible the problem is related to Exchange 2003.

I'm on Exchange 2003 and did not have any problems after set up. (I did set it up on my device and not device center / active sync) So far this ROM has been the best. I loaded up FuzeBerry v5.0.0 and everything is running without a hitch.

I did flash from my SD card if that has anything to do with it...

[TriAxisFL]

Just tested it myself, and the phone did not soft reset.

-Note to self- Don't let WMP shuffle songs... co-workers stare when the Ducktales theme starts blasting out of your phone...


I just reburnt the ROM and didn't make any changes. The 1st thing I did was open up Windows Media Player. My phone once again soft reset after playing a song. I think its related to my SD Card. Song that are on my main memory play fine, but the SD songs crash it. I have tried deleting my Cache and Metadata off the SD card to see if that helps. Unfortunately it did not.

I'm going to delete all the music on my SD card and recopy them over. Hopefully this resolves my issue as I am happy with this ROM.

[techman28]

Has anyone tried Hergs v4 slide to answer w/ curtain app with NATF's v4 rom? - http://forum.xda-developers.com/showthread.php?t=466519
How does it work?

Thanks.

[martyramos]

Anyone having Exchange issues, please post some specifics about your server configuration. i.e: Exchange version, and when it last worked.

My company uses Exchange, but will not let anything non-Blackberry connect to it, so I cannot test it.

I'm running with an Exchange 2007 Server and struggling. I configured from my PC and all worked fine...then installed a bunch of CAB's and it stopped working (no WKTask was installed). Just hard-reset and am walking through it again. Will update results.

[Royalmathmtcs]

Has anyone tried Hergs v4 slide to answer w/ curtain app with NATF's v4 rom? - http://forum.xda-developers.com/showthread.php?t=466519
How does it work?

Thanks.

I'm sure you're aware of S2U2 here http://forum.xda-developers.com/showthread.php?t=464695.

I've been using s2u2 v1.40 along with the lastest NATF rom and have had pleasing results. I had major battery loss with the earlier versions of s2u2 under the stock fuze rom, but this combo seems to work well. This probably doesn't help you out at all with Hergs v4 s2a :(

[tvromero]

Is anyone else seeing the issues with the Comm Manager toggles for MSDP and Data not allowing you to turn them on?

I also am not able to toggle the "Data connection" on at will. I can force it open by using the browser or weather but cannot toggle it myself.

-Tim

[ryan6603]

I'm sure you're aware of S2U2 here http://forum.xda-developers.com/showthread.php?t=464695.

I've been using s2u2 v1.40 along with the lastest NATF rom and have had pleasing results. I had major battery loss with the earlier versions of s2u2 under the stock fuze rom, but this combo seems to work well. This probably doesn't help you out at all with Hergs v4 s2a :(

I have also been using S2U2 1.40 VGA and i love it had zero issues.

tried Diamond_Black_Slide_To_Answer and it did not work very well and would not uninstall.

I have also been using TouchResponse_v02_2 and i must say that he is right on with this. I have had zero issues and response is great.

for both of them i still have excellent battery life where i usually have 30% battery life after 24 hours (with bt headest, 15min grab, and 45-60 min worth of talk time). on the weekends where i am not talking as much i'll have over 50% on the weekend within a 36hour period. (talking with v3.2 had not had it long enough for v4) i don't think we need to mention with stock rom i was lucky to get a full day out of it and was mandt to charge overnight.

PS...the S2U2 made the phone complete (necessities that is). that was the only thing really missing for me. i hate the WM lock method and enjoy that it does not start playing music or dial on me in my pocket but still gives a quick way to unlock or answer the phone.

I'll report on the v4 once i am on it for couple days.

[wolfnumba1]

anybody else experiencing the problem where you cant set the status bar to when you press the status bar on top that the whole menu of whats in the status bar (i.e. you data connnection battery meter and if you have a new message or whatever) the option is in settings under system and touchflo but when I check it to be on and click or it goes back to unchecked. Please let me know

[Lostwarriorram]

I also am not able to toggle the "Data connection" on at will. I can force it open by using the browser or weather but cannot toggle it myself.

-Tim

Make sure phone is not plugged into USB

[Lostwarriorram]

Any suggestions on page pool size for V4? BTW, what is the default size?

Thanks in advance.

[karn101]

anybody else experiencing the problem where you cant set the status bar to when you press the status bar on top that the whole menu of whats in the status bar (i.e. you data connnection battery meter and if you have a new message or whatever) the option is in settings under system and touchflo but when I check it to be on and click or it goes back to unchecked. Please let me know

The .cab for this was posted a few posts back.

[nableezy]

I'm running with an Exchange 2007 Server and struggling. I configured from my PC and all worked fine...then installed a bunch of CAB's and it stopped working (no WKTask was installed). Just hard-reset and am walking through it again. Will update results.
It wasnt just WkTask for me, ended up being having alot of things running or using some other tweaks for performance takes up to much memory. Do you have any other programs running when trying to connect? I had all these same settings on 3.2 with not a single problem, but scaling everything back seems to be fine for me.

[nableezy]

And once I scaled back the tweaks, everything runs fine, with wktask.

[Captain_Throwback]

Here's another interesting issue: I have my 16GB microSDHC card partitioned into two separate drives, which has always been fine. Now, however, both HTC Album and HTC Music Player are only seeing my Storage Card (and not Storage Card2, where I keep all my Pics/Music/Documents). File Explorer and the Device see them fine, it just appears to be those two apps. Not sure why that is.

My phone also seems to randomly soft reset while I'm in the middle of doing things, and sometimes icons and the entire contents of menus disappear.

Its a shame too, because GPS is working fabulously with this ROM. Quickest and most stable fix I've EVER gotten, with aGPS enabled, at that!

[nableezy]

I'll bet that's what it is. Figures too. I work for a technology company and they won't even update their Exchange servers.

There must be some sort of workaround . . .
What is the error code in activesync?

[oaa8]

On another note, I had something really strange just happen. I surfed Opera over to http://www.hardocp.com/. The page has a fair amount of Flash on it and was loading slowly, so I set the phone down to wait and surfed on my PC.

While I was waiting, my Fuze rebooted itself! No warning, no nothing, it just buzzed a second (as if I'd just turned it on)

This happened to me as well on NAFT's v3.2 after I updated opera to 15202 but not since. Sorry I don't have any answers

Has anyone tried Hergs v4 slide to answer w/ curtain app with NATF's v4 rom? - http://forum.xda-developers.com/showthread.php?t=466519
How does it work?

Thanks.
Yes It does work and I've have had no problems other than the black version not being ready yet. :D

[wolfnumba1]

The .cab for this was posted a few posts back.

which cab are you talking about?

[lutz890]

First I wanna thank NATF for this great ROM.

By far v4.0 works pretty well for me cept when I use Skype or Fring, once the screen turns off it also cuts down the phone too which never happens to me before. I'm using 4.0 standard version. Can anyone confirm this issue?:confused:

[CR7KB24]

Hi, I kinda new to rom flashing and i was wondering is it mandatory that I FLASH HARDSPL, because when i started flashing the HARDSPL it says it was updationg from 1.95.(something i can't remember the rest) to 1.90.(something i can't remember the rest)

Please any help would be greatly appreciated, and i really want this rom, since the stock ATT rom sucks!

[nableezy]

Hi, I kinda new to rom flashing and i was wondering is it mandatory that I FLASH HARDSPL, because when i started flashing the HARDSPL it says it was updationg from 1.95.(something i can't remember the rest) to 1.90.(something i can't remember the rest)

Please any help would be greatly appreciated, and i really want this rom, since the stock ATT rom sucks!
yes it is mandatory and better than the stock spl

[NotATreoFan]

Hi, I kinda new to rom flashing and i was wondering is it mandatory that I FLASH HARDSPL, because when i started flashing the HARDSPL it says it was updationg from 1.95.(something i can't remember the rest) to 1.90.(something i can't remember the rest)

Please any help would be greatly appreciated, and i really want this rom, since the stock ATT rom sucks!

HardSPL is mandatory. Don't worry about the version number. HardSPL is based on SPL 1.90, but it will work fine.

[CR7KB24]

HardSPL is mandatory. Don't worry about the version number. HardSPL is based on SPL 1.90, but it will work fine.

Ok, i will get right back to flashing, Thanks so much!

[Captain_Throwback]

What is the error code in activesync?

I'm getting the 0x80070008 (Out of Memory?) error. It makes no sense.

Is it possible there are some root/security certificates missing from the ROM? That might explain why my server won't connect. It has to authenticate my device and enforce security policies, and if something's missing, that might explain it.

[Bizybone]

which cab are you talking about?

Check post 2659.

[kk0813]

In TouchFlo 3D music tab, once I start the music is there any way to turn off the screen other than to wait till it's off after a minute? I tried using power button but this will stop the music.

[oaa8]

In TouchFlo 3D music tab, once I start the music is there any way to turn off the screen other than to wait till it's off after a minute? I tried using power button but this will stop the music.

I believe you can just hit the power button if a headset is plugged in. I may be wrong though.

[CR7KB24]

Does any one know why I might be getting this error -

ERROR [262]: Update Error :confused:

please if you might know why i am getting this or what i'm doing wrong, please help, i pretty sure i did everything like i'm supposed to, but still no luck flashing HARDSPL :(

[martyramos]

I'm running with an Exchange 2007 Server and struggling. I configured from my PC and all worked fine...then installed a bunch of CAB's and it stopped working (no WKTask was installed). Just hard-reset and am walking through it again. Will update results.

Okay...it wasn't the CAB's...it was a performance tweak I did that caused ActiveSync to no longer sync. Toggling this setting back and forth solves/recreates the problem. Specifically: HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768

The error I receive is noted above: 0x80070008 (Out of Memory?)

Note: Recommendation from this thread (http://forum.xda-developers.com/showpost.php?p=2475291&postcount=1):

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.

[Captain_Throwback]

Okay...it wasn't the CAB's...it was a performance tweak I did that caused ActiveSync to no longer sync. Toggling this setting back and forth solves/recreates the problem. Specifically: HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768

The error I receive is noted above: 0x80070008 (Out of Memory?)

I changed the registry entry noted above to 32768 (the value in my registry was already set to 16384), and soft reset my device. The below chain of events happened upon my phone starting back up:

Got a Voice Command error (for the 2nd time today). I haven't even tried to use Voice Command yet.

VoiceCmd.exe
The file 'VoiceCmd' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.

After hitting 'ok' on that box, I'm getting another one:

Shortcut Target
Error opening the shortcut or locating the target filename.

and also,

cprog.exe (same error as VoiceCmd)

I do have the phone connected via USB to my computer, but I reset it while connected not an hour ago and it was fine. The phone now appears to be stuck and not doing anything. I guess I'll be soft resetting again.

I'll reset it again before changing the reg entry back, just to verify that's the problem. Activesync still isn't working for me.

EDIT: I can't even get the phone back to a point to change the reg entry. Looks like I'll be hard resetting and flashing 3.2. Hopefully we can get to the bottom of the AS issue, because I really had high hopes for 4.0. Maybe 4.1 will be what I need . . .

[nableezy]

I changed the registry entry noted above to 32768 (the value in my registry was already set to 16384), and soft reset my device. The below chain of events happened upon my phone starting back up:

Got a Voice Command error (for the 2nd time today). I haven't even tried to use Voice Command yet.

VoiceCmd.exe
The file 'VoiceCmd' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.

After hitting 'ok' on that box, I'm getting another one:

Shortcut Target
Error opening the shortcut or locating the target filename.

and also,

cprog.exe (same error as VoiceCmd)

I do have the phone connected via USB to my computer, but I reset it while connected not an hour ago and it was fine. The phone now appears to be stuck and not doing anything. I guess I'll be soft resetting again.

I'll reset it again before changing the reg entry back, just to verify that's the problem. Activesync still isn't working for me.


The registry setting was one of my problems too, having it 32764 looks like it takes up too much memory for activesync. But you are going straight from a hard reset and it still is not connecting. I saw online some tips for exchange 03 and wm6.1, they were suggesting setting it up from your office, inside the firewall, connected to the computer through active sync. If it works, let it download everything then you **should** be able to connect ota. Hope it helps

[Captain_Throwback]

The registry setting was one of my problems too, having it 32764 looks like it takes up too much memory for activesync. But you are going straight from a hard reset and it still is not connecting. I saw online some tips for exchange 03 and wm6.1, they were suggesting setting it up from your office, inside the firewall, connected to the computer through active sync. If it works, let it download everything then you **should** be able to connect ota. Hope it helps

That's where I was trying it from in the first place. No go. :confused:

I've decided to just go back to 3.2 until this all gets sorted out. If it doesn't, I'm still quite satisfied with that version. Thanks for all your help.

[AvengerBB]

Okay...it wasn't the CAB's...it was a performance tweak I did that caused ActiveSync to no longer sync. Toggling this setting back and forth solves/recreates the problem. Specifically: HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768

The error I receive is noted above: 0x80070008 (Out of Memory?)

Note: Recommendation from this thread (http://forum.xda-developers.com/showpost.php?p=2475291&postcount=1):

Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Much quicker than number 1 on it’s own, now stonkingly fast.

In general, I stay away from threads tell me to make all kinds of registry changes to improve performance. While there certainly may be settings that are good to change with little side effects, they are set that way for a reason.. and that is greater compatability. If you make changes to speed something up or make it work "better", you are probably giving something up elsewhere.

I let the pros work through those settings in their ROMs or if there's something I want to test I do it one at a time and give it a while to see what happens.

Back to your setting above - you are doubling the cache size. That commits more memory to a certain function which may give you more speed, but reduces the available memory. It might also cause conflicts with some applications that were expecting it to be the normal size.

Just my 2 cents...

[ryan6603]

what to see if anybody has installed these cabs together on v4.
HTC Enlarge Title Bar
TouchResponse_v02_2

the response that was included with the build seemed finicky. i had a great interaction with the TouchResponse on v3.2 so i decided to install.

I installed rom, Setup Exchange (sync no prob) then soft reset, Installed Enlarge Title Bar then soft reset, Installed TouchResponse then soft reset and then freeze on splash screen. i get id info at bottom to pop up but that's as far as it goes.
i did not do a CU since i saw the other post i wanted a clean install.

i have done soft resets and battery out and will not go past splash. going to hard reset to see if i can duplicate or if it was a fluke.

[Captain_Throwback]

what to see if anybody has installed these cabs together on v4.
HTC Enlarge Title Bar
TouchResponse_v02_2

the response that was included with the build seemed finicky. i had a great interaction with the TouchResponse on v3.2 so i decided to install.

I installed rom, Setup Exchange (sync no prob) then soft reset, Installed Enlarge Title Bar then soft reset, Installed TouchResponse then soft reset and then freeze on splash screen. i get id info at bottom to pop up but that's as far as it goes.
i did not do a CU since i saw the other post i wanted a clean install.

i have done soft resets and battery out and will not go past splash. going to hard reset to see if i can duplicate or if it was a fluke.

The version of TouchResponse that NATF included in the ROM is the most recent version. If you go in the Touch Response Settings and change the value to 50ms (the default when you install the cab), it should work fine. By installing the cab on top of the program that's already installed in the ROM, that might be making your phone freeze.

[xcsdm]

I realize this is a quick and dirty "hack" of sorts. But what it does do is give you 2 more buttons in Settings - Buttons. PTT, and PTT (Hold).

What is in this cab?
First, I added 2 buttons to HKLM\Software\Microsoft\Shell\Keys...
namely 40C7 and 40C8. 40C6 is Long Send
I named these buttons PTT, and PTT (Hold) respectively.
(My cab also adds the name "Long Send" to the button NATF already had setup for Long Send)

Second, I created a simple app that reads the shortcut setup for the button and executes it. This app is installed as \Windows\PTTMod.exe. This app has 2 options for a parameter. "-long", "-short". I replace the long_ptt.lnk, and short_ptt.lnk to point to this file with appropriate parameter.


I've tested this with NATF's version 3.2 and 4.0 ROMs. I assume it will work with any rom setup to use long_ptt.lnk and short_ptt.lnk and allow those to be replaced.

EDIT: Since Long Send, and Short PTT are both mapped to Voice command, once you enter the Buttons setting program, you'll be forced to change one of them away from Voice command...

XCSdM

[martyramos]

In general, I stay away from threads tell me to make all kinds of registry changes to improve performance. While there certainly may be settings that are good to change with little side effects, they are set that way for a reason.. and that is greater compatability. If you make changes to speed something up or make it work "better", you are probably giving something up elsewhere.

I let the pros work through those settings in their ROMs or if there's something I want to test I do it one at a time and give it a while to see what happens.

Back to your setting above - you are doubling the cache size. That commits more memory to a certain function which may give you more speed, but reduces the available memory. It might also cause conflicts with some applications that were expecting it to be the normal size.

Just my 2 cents...

Yes...yes...I know...just taken in by the phrase "stonkingly fast" in a "sticky" thread 21 pages long with a 124K views and it being the second entry...I should have known better...

[ryan6603]

The version of TouchResponse that NATF included in the ROM is the most recent version. If you go in the Touch Response Settings and change the value to 50ms (the default when you install the cab), it should work fine. By installing the cab on top of the program that's already installed in the ROM, that might be making your phone freeze.

ya, that is what i was thinking once i did that. I didn't even bother to look a version no. and thought it was different program. already hard restart and back up. the 50ms did the trick. when i was reading the other post on it I thought they said 15-20ms. i was in such a rush to install the other one i skipped testing steps. thanks.

[agentredd]

I flashed 4.0 and when i tried to add Fuzeberry 6.0 it wouldn't load up. is anyone having this problem?

[NotATreoFan]

That's where I was trying it from in the first place. No go. :confused:

I've decided to just go back to 3.2 until this all gets sorted out. If it doesn't, I'm still quite satisfied with that version. Thanks for all your help.

I'm definitely not going to give up on this. I just need everyone to bear with me since all of my information is coming in from other sources (read: not my own eyes).

I realize this is a quick and dirty "hack" of sorts. But what it does do is give you 2 more buttons in Settings - Buttons. PTT, and PTT (Hold).

What is in this cab?
First, I added 2 buttons to HKLM\Software\Microsoft\Shell\Keys...
namely 40C7 and 40C8. 40C6 is Long Send
I named these buttons PTT, and PTT (Hold) respectively.
(My cab also adds the name "Long Send" to the button NATF already had setup for Long Send)

Second, I created a simple app that reads the shortcut setup for the button and executes it. This app is installed as \Windows\PTTMod.exe. This app has 2 options for a parameter. "-long", "-short". I replace the long_ptt.lnk, and short_ptt.lnk to point to this file with appropriate parameter.


I've tested this with NATF's version 3.2 and 4.0 ROMs. I assume it will work with any rom setup to use long_ptt.lnk and short_ptt.lnk and allow those to be replaced.

EDIT: Since Long Send, and Short PTT are both mapped to Voice command, once you enter the Buttons setting program, you'll be forced to change one of them away from Voice command...

XCSdM

Just to confirm: this CAB adds the ability to map programs to the PTT button? Can you choose from the same list as Button 1?

Also, how does it work? Intercept the button press and launch the designated program without actually looking for short_PTT and long_PTT? Or are those shortcuts still required?

[xcsdm]

Just to confirm: this CAB adds the ability to map programs to the PTT button? Can you choose from the same list as Button 1?

Also, how does it work? Intercept the button press and launch the designated program without actually looking for short_PTT and long_PTT? Or are those shortcuts still required?

Here is the Setup Exactly (Using a short ptt press as example)
Installation adds \windows\pttmod.exe and replaces long_ptt.lnk and short_ptt.lnk
short_ptt.lnk now runs:
\windows\pttmod.exe -short

PTTMod then reads the string
HKLM\Software\Microsoft\Shell\Keys\40C7\(Default)
and simply executes the lnk/shortcut specified in that key.

So I don't change anything about the way the button works. I just created 2 bogus buttons in the registry. The standard button setting screen allows you to change these. Instead of the OS actually using these "buttons" I use the long/short_ptt.lnk files that were already setup to read these bogus buttons settings, and run the selected program.

XC

Make sense?

[CR7KB24]

Please can someone help me

Does any one know why I might be getting this error -

ERROR [262]: Update Error :confused:

please if you might know why i am getting this or what i'm doing wrong, please help, i pretty sure i did everything like i'm supposed to, but still no luck flashing HARDSPL :(

[ryan6603]

I flashed 4.0 and when i tried to add Fuzeberry 6.0 it wouldn't load up. is anyone having this problem?
i never tried the 6.0 until today. i decided to install on 3.2 before i flashed to 4.0 to see how it looked and acted with his rom. it got maybe 70-80 and gave me an error. something with security etc. i think. is it getting stuck with you in the same manor? wanted to see if it did the same thing on v4 but if you already did.....

in another post earlier someone said they were using 5.0 and it was working fine.

[xcsdm]

i never tried the 6.0 until today. i decided to install on 3.2 before i flashed to 4.0 to see how it looked and acted with his rom. it got maybe 70-80 and gave me an error. something with security etc. i think. is it getting stuck with you in the same manor? wanted to see if it did the same thing on v4 but if you already did.....

in another post earlier someone said they were using 5.0 and it was working fine.

I was able to load 6.0 on v4 (Standard/Fuze) and it is working great.

XC

[Smalls2]

Hey NATF,

I flashed 4.0 and setup exchange push manually. I'm on Exchange 2003 and it works fine.

[Smalls2]

The volume issue is sporadic. Sometimes it will work the second time I change it, or its works the first time, after a slight lag.

[NotATreoFan]

Here is the Setup Exactly (Using a short ptt press as example)
Installation adds \windows\pttmod.exe and replaces long_ptt.lnk and short_ptt.lnk
short_ptt.lnk now runs:
\windows\pttmod.exe -short

PTTMod then reads the string
HKLM\Software\Microsoft\Shell\Keys\40C7\(Default)
and simply executes the lnk/shortcut specified in that key.

So I don't change anything about the way the button works. I just created 2 bogus buttons in the registry. The standard button setting screen allows you to change these. Instead of the OS actually using these "buttons" I use the long/short_ptt.lnk files that were already setup to read these bogus buttons settings, and run the selected program.

XC

Make sense?

Awesome, thanks for the clarification. If you don't mind, after some testing, I'd like to include this in v4.1.

[TVDinner]

I have been reading and reading all the 4.0 posts in the thread. The most important thing for me is that my activesync will work with my outlook and my pop3 emails will be received/sent from the phone. Can I confidently assume these 2 things will work?

[Da_G]

Sign me up as wanting to include your awesome app too, xcsdm :)

[Captain_Throwback]

I have been reading and reading all the 4.0 posts in the thread. The most important thing for me is that my activesync will work with my outlook and my pop3 emails will be received/sent from the phone. Can I confidently assume these 2 things will work?

It seems that I'm the only one that's having a real problem with it, and its probably related to my company's Exchange server somehow. Everyone seems to have it working okay, so its probably safe for you to give it a shot. Unless you have the same problem as me . . . in which case there's currently no solution.

[xcsdm]

Awesome, thanks for the clarification. If you don't mind, after some testing, I'd like to include this in v4.1.

Please do. If you find any issues, let me know. It's a very simple program, so I don't know what might come up.

I can't contribute financially, but I can give this little nugget :-)

XC

[dlweston]

I'm sure you're aware of S2U2 here http://forum.xda-developers.com/showthread.php?t=464695.

I've been using s2u2 v1.40 along with the lastest NATF rom and have had pleasing results. I had major battery loss with the earlier versions of s2u2 under the stock fuze rom, but this combo seems to work well. This probably doesn't help you out at all with Hergs v4 s2a :(

I prefer TouchLockPro which is in the Diamond thread here http://forum.xda-developers.com/showthread.php?t=444215&highlight=touchlockpro. It locks the device on power on. It will auto unlock via the light sensor. It will unlock if the stylus is removed or the keyboard is opened. There is a capacitive sensor unlock also.

[martyramos]

Has anyone tried Hergs v4 slide to answer w/ curtain app with NATF's v4 rom? - http://forum.xda-developers.com/showthread.php?t=466519
How does it work?

Thanks.

Re: Diamond Black Slide To Answer (http://forum.xda-developers.com/showthread.php?t=466519). Works great on v4, so far (only took about 7 calls though) but have been using it for a week on v3.2...I like it as it's simpler than S2U2...only activates on a call and works well with the security lock...keeps one from accidentally getting a call when pulling it out of your pouch/pocket. There's a registry setting to remove the "curtain" (set HKLM/Software/HTC/PHONE/PhoneLockEnable to 0, instead of 1)...my preference.

Here is the Setup Exactly (Using a short ptt press as example)
Installation adds \windows\pttmod.exe and replaces long_ptt.lnk and short_ptt.lnk
short_ptt.lnk now runs:
\windows\pttmod.exe -short

PTTMod then reads the string
HKLM\Software\Microsoft\Shell\Keys\40C7\(Default)
and simply executes the lnk/shortcut specified in that key.

So I don't change anything about the way the button works. I just created 2 bogus buttons in the registry. The standard button setting screen allows you to change these. Instead of the OS actually using these "buttons" I use the long/short_ptt.lnk files that were already setup to read these bogus buttons settings, and run the selected program.

XC

Make sense?

Shear genius...or at least a coder who's been around the block a few times...very creative solution to what many gave up on! Good job!

[oaa8]

i never tried the 6.0 until today. i decided to install on 3.2 before i flashed to 4.0 to see how it looked and acted with his rom. it got maybe 70-80 and gave me an error. something with security etc. i think. is it getting stuck with you in the same manor?

Did you disable TF3D in the Today settings. I had a message when installing Herg's v7b theme because I forgot to do this and then it installed with no problems once I disabled it.

I have been reading and reading all the 4.0 posts in the thread. The most important thing for me is that my activesync will work with my outlook and my pop3 emails will be received/sent from the phone. Can I confidently assume these 2 things will work?

I don't use a data plan but rather wifi. I synchronize my Yahoo account with my outlook using YPOPs but since it's POP3 when It syncs with my phone my phone of course cant go grab more emails because it's not exchange. So I actually have two accounts with the same emails on my phone because I set up my Yahoo account on my phone as well and it works correctly as it should on any other phone. So I have my Outlook email and POP3 email both on my Fuze with no problems other than wishing Yahoo could turn itself into an Exchange server.

[ecltech]

NotATreoFan,

Here's a little tweak you may consider including in your future release. The Task Manager has the Orange color. Changing the two registry entries will make it Grey to match the other selections. I take no credit for this... this was done by someone else. Just passing it along. :)


[HKEY_CURRENT_USER\Software\HTC\TaskManager]
"ManilaCustomHlUp"=dword:00ABABAB
"ManilaCustomHlDown"=dword:00ABABAB

[nableezy]

One issue that I am having, but is from 3.2 as well, is that java cannot connect with att isp as selected connection. Opera mini can figure out that there is no proxy, but java itself and gmail cannot. Anybody else have this problem or can you connect with both medianet and att isp?

[Captain_Throwback]

One issue that I am having, but is from 3.2 as well, is that java cannot connect with att isp as selected connection. Opera mini can figure out that there is no proxy, but java itself and gmail cannot. Anybody else have this problem or can you connect with both medianet and att isp?

I'm not sure I know the difference between the two, but I do know this - what I'd REALLY like to be able to do is make Java connect over WiFi. Does anyone know how to make that happen?

[NotATreoFan]

NotATreoFan,

Here's a little tweak you may consider including in your future release. The Task Manager has the Orange color. Changing the two registry entries will make it Grey to match the other selections. I take no credit for this... this was done by someone else. Just passing it along. :)


[HKEY_CURRENT_USER\Software\HTC\TaskManager]
"ManilaCustomHlUp"=dword:00ABABAB
"ManilaCustomHlDown"=dword:00ABABAB


Consider it done.

One issue that I am having, but is from 3.2 as well, is that java cannot connect with att isp as selected connection. Opera mini can figure out that there is no proxy, but java itself and gmail cannot. Anybody else have this problem or can you connect with both medianet and att isp?

So you're able to connect through ISP.Cingular with other programs?

I'm not sure I know the difference between the two, but I do know this - what I'd REALLY like to be able to do is make Java connect over WiFi. Does anyone know how to make that happen?

ISP.Cingular is only available if you have a Laptop Connect or PDA Plan w/ tethering. The ISP connection gives you a semi-static IP address, and doesn't route you through 5 million firewalls, so you get much faster speeds on it.

[nableezy]

Consider it done.



So you're able to connect through ISP.Cingular with other programs?

Yup, everything else, obviously cannot goto device.home, but opera and ie work with your remove proxy cabs, weather works and active sync. Not a huge deal, but they are making me pay for it might as well use it right :rolleyes:

[dlweston]

It seems that I'm the only one that's having a real problem with it, and its probably related to my company's Exchange server somehow. Everyone seems to have it working okay, so its probably safe for you to give it a shot. Unless you have the same problem as me . . . in which case there's currently no solution.


I am not sure this is relavent, but when the Exchange sync feature was added to the 8525 ROM there was a note about it only working with Exchange 2007 or Exchange 2003 with SP3 applied if I remeber right. You might check that recent patches have been applied to your Exchange server. Even though they may not upgrade to Exchange 2007, they would have to be nuts to not apply current patches. It could be the new recent build used in this ROM needs some patch applied to Exchange 2003.

[paschott]

I'm running v3.2 and I've found if I try launching the Blue Tooth Explorer the phone just freezes, and requires me to hit the reset button to get the phone to come back. Is anyone else having this issue?

Running 3.2 Fuze Standard on mine - no issues with the BlueTooth Explorer - I've paired with two devices now with no issues and it seems to work with both. No reset required.

[agentredd]

I don't know what wrong. I flashed back to 3.2 and it still won't load it. it was working fine at first

[nableezy]

I'm not sure I know the difference between the two, but I do know this - what I'd REALLY like to be able to do is make Java connect over WiFi. Does anyone know how to make that happen?

I am quessing that there is some sort of hidden proxy on java, but I can't find any sort of setting that would enable that.

[paschott]

Do I need to reset my radio version down to a lower version in order to flash using my SD card? I tried it with v3.2 Standard and got an "Image Not Found" error. I'd definitely prefer to flash using that method as it should work in Vista. I was able to use an XP machine to run the update from ATT Stock to v3.2, but wasn't sure if I was missing something when trying to update from SD. Any feedback/pointers?

Thanks.

[nableezy]

I am quessing that there is some sort of hidden proxy on java, but I can't find any sort of setting that would enable that.

got it, both wifi and isp work now:
http://forum.xda-developers.com/showthread.php?p=2991729

step 1

Edit:
Connection without proxy works both in media net and att isp, maybe include this as it also add wi-fi to java?

[oaa8]

I don't know what wrong. I flashed back to 3.2 and it still won't load it. it was working fine at first

I assume you are referring to the Theme for TouchFlo. If you are, you shouldn't need to revert back to 3.2 for the theme to work. You may just have forgotten to disable touchflo before installing the theme.

[ryan6603]

I prefer TouchLockPro which is in the Diamond thread here http://forum.xda-developers.com/showthread.php?t=444215&highlight=touchlockpro. It locks the device on power on. It will auto unlock via the light sensor. It will unlock if the stylus is removed or the keyboard is opened. There is a capacitive sensor unlock also.

have you seen all the options and different settings in the S2U2 once installed? May want to look again to see what you are missing.

[ryan6603]

Did you disable TF3D in the Today settings. I had a message when installing Herg's v7b theme because I forgot to do this and then it installed with no problems once I disabled it.

Ya, that was most likely it. Wasn't really troubleshooting since i was minutes away from a v4 flash. Thanks.

I installed v6 berry on v4 rom no probs.

[ecltech]

NATF,

One other thing... the Enlarge Start Menu has the White Strip at the top (it shows for a brief moment). I installed the following Enlarge Start Menu and it fixed it. This is from Da_G's cabs. I forgot to do a reg dump before I install it to see if it was just a registry change.

[oaa8]

Do I need to reset my radio version down to a lower version in order to flash using my SD card? I tried it with v3.2 Standard and got an "Image Not Found" error. I'd definitely prefer to flash using that method as it should work in Vista. I was able to use an XP machine to run the update from ATT Stock to v3.2, but wasn't sure if I was missing something when trying to update from SD. Any feedback/pointers?

Thanks.
You may have forgotten to format to fat32
*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*
1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE

2. FLASH HARDSPL

Flashing via ActiveSync with USB Lead (thanks to OliNex (http://forum.xda-developers.com/member.php?u=948514))
1. Download Hard-SPL package (http://www.4shared.com/file/72285356/10946f94/Raphael_HardSPL.html) and unzip it to your Hard Drive. Make sure it's launched from a local drive (not through network drive, etc.)
2. Your Phone MUST be Synced with PC in Windows Mobile!
3. Run RaphaelHardSPL-Unsigned_190_1_3.exe,
4. Follow steps in the RUU (Rom Update Utility), check device for prompts after PC shows loading bar.
5. It should go to a black screen now.
6. SPL flashes, device automatically reboots, job done.
7. To confirm you installed it correctly, go into bootloader mode (tricolour screen!) and verify the screen shows 1.90.OliNex.

**To enter Bootloader and check HardSPL version; with the device turned on, press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears**

NOTE 1: You will not see the SPL version during normal boot, that is the OS version, not SPL!

NOTE 2: Anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the download to the device and run it. Once the screen is black, run RUU manually from the PC.

NOTE 3: This is an unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. Also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, go *HERE* (http://forum.xda-developers.com/showthread.php?t=410150)

NOTE 4: DO NOT use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! If you want to flash some other rom, then use customruu from *HERE* (http://forum.xda-developers.com/showthread.php?t=410761)

4. DOWNLOAD AND FLASH YOUR PREFERED ROM.

Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do).
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer.
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card.
5. Plug the microSD Card into the phone.
6. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears.
7. Follow the onscreen instructions to start flashing.
8. Once phone finishes flashing and gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
9. Follow onscreen instructions to set up your New Rom.

[agentredd]

I assume you are referring to the Theme for TouchFlo. If you are, you shouldn't need to revert back to 3.2 for the theme to work. You may just have forgotten to disable touchflo before installing the theme.

I disabled it and its still not loading

[nableezy]

Do I need to reset my radio version down to a lower version in order to flash using my SD card? I tried it with v3.2 Standard and got an "Image Not Found" error. I'd definitely prefer to flash using that method as it should work in Vista. I was able to use an XP machine to run the update from ATT Stock to v3.2, but wasn't sure if I was missing something when trying to update from SD. Any feedback/pointers?

Thanks.
I have had 0 problems flashing in vista with the raphaelwrapper, probably flashed 30 times in the 5 days ive had this thing :)

[oaa8]

I disabled it and its still not loading

What message is it giving you? Also try disabling, rebooting and then installing.

[agentredd]

What message is it giving you? Also try disabling, rebooting and then installing.

It just comes up with tap here to load touchflo but it wont load

[oaa8]

It just comes up with tap here to load touchflo but it wont load

When you uninstall the theme, do you get the normal touchflo?

[agentredd]

When you uninstall the theme, do you get the normal touchflo?

Yes, but when i try to load fuzeberry v6 it wont work

[CR7KB24]

Please can someone help me

Does any one know why I might be getting this error -

ERROR [262]: Update Error

please if you might know why i am getting this or what i'm doing wrong, please help, i pretty sure i did everything like i'm supposed to, but still no luck flashing HARDSPL

[oaa8]

Yes, but when i try to load fuzeberry v6 it wont work

Can you get other themes to work such as herg's http://forum.xda-developers.com/showthread.php?t=447056

[agentredd]

Can you get other themes to work such as herg's http://forum.xda-developers.com/showthread.php?t=447056

I haven't tried. Im Going to flash v4 again then try fuzeberry v6 again.

[bamf-hacker]

V.4 with Fuzeberry 5.0 and BB Connect working great. No issues at all. GPS is fast and working great.

As always thanks NATF!!!

[jtsurfs]

Anyone else seeing an error with Diamond TF3D in NATF's Standard v4.0? I just flashed and I get an error that says "an unexpected error has occurred in Diamond TF3D Config.exe". I tried uninstalling it and reinstalling, soft resetting, and combinations of soft-resets and installing. Keep getting the same error. If I check the details there is something about "NullReferenceException". Not sure what any of this means. It worked with Standard v3.2.

NATF - this ROM is awesome, just want to get this one thing worked out and I will be a happy boy!

[jtsurfs]

my raphael is flashed with the new natf v4 and it works great .. well i did only step into one problem though i haven't found any sollution ot it.. i can install diamond tf3d config but it won't open.. or more exact i get an error.. do this happen only to me or could someone try to install it and report back if it works?.. that's the only app i cant make work for now..

Sorry I missed this one earlier. So I'm not the only one with this problem in V4.0. :(

[nableezy]

Anyone else seeing an error with Diamond TF3D in NATF's Standard v4.0? I just flashed and I get an error that says "an unexpected error has occurred in Diamond TF3D Config.exe". I tried uninstalling it and reinstalling, soft resetting, and combinations of soft-resets and installing. Keep getting the same error. If I check the details there is something about "NullReferenceException". Not sure what any of this means. It worked with Standard v3.2.

NATF - this ROM is awesome, just want to get this one thing worked out and I will be a happy boy!
you need to delete the tweaks file in the install dir, if to device in \Program Files\Diamond TF3D Config\

[ryan6603]

i like how IE is rendering the pages now. I don't like how hard it is to zoom in. would be nice if we could use the thumb circle. It also seems that when i select to zoom out i then have the zoom in feature. But the zoom in only goes to a certain point not nearly enough. I can read everything but it's hard.

[josbald1975]

Please can someone help me

Does any one know why I might be getting this error -

ERROR [262]: Update Error

please if you might know why i am getting this or what i'm doing wrong, please help, i pretty sure i did everything like i'm supposed to, but still no luck flashing HARDSPL

please read this thread:
http://forum.xda-developers.com/showthread.php?t=410150

[jtsurfs]

you need to delete the tweaks file in the install dir, if to device in \Program Files\Diamond TF3D Config\

Thanks, I went back and searched some more and found someone else had posted a different version of TF3D Config and it seems to work ok with this ROM.

[CR7KB24]

please read this thread:
http://forum.xda-developers.com/showthread.php?t=410150

Thats exactly the tread i read a couple of time before i even tried it, i don't understand what i am doing wrong :confused:

[TVDinner]

I have installed this ROM and so far everything working perfectly. Mobile Shell reinstalled perfectly (eliminating the need to use the sucky TF3D in any way) and everything else being reinstalled. I am receiving emails, but unable to send out, which must be a setting error I made and not due to the ROM.

So far so good!

[Smalls2]

I realize this is a quick and dirty "hack" of sorts. But what it does do is give you 2 more buttons in Settings - Buttons. PTT, and PTT (Hold).

What is in this cab?
First, I added 2 buttons to HKLM\Software\Microsoft\Shell\Keys...
namely 40C7 and 40C8. 40C6 is Long Send
I named these buttons PTT, and PTT (Hold) respectively.
(My cab also adds the name "Long Send" to the button NATF already had setup for Long Send)

Second, I created a simple app that reads the shortcut setup for the button and executes it. This app is installed as \Windows\PTTMod.exe. This app has 2 options for a parameter. "-long", "-short". I replace the long_ptt.lnk, and short_ptt.lnk to point to this file with appropriate parameter.


I've tested this with NATF's version 3.2 and 4.0 ROMs. I assume it will work with any rom setup to use long_ptt.lnk and short_ptt.lnk and allow those to be replaced.

EDIT: Since Long Send, and Short PTT are both mapped to Voice command, once you enter the Buttons setting program, you'll be forced to change one of them away from Voice command...

XCSdM



Thank you thank you thank you!!!

[ryan6603]

Thats exactly the tread i read a couple of time before i even tried it, i don't understand what i am doing wrong :confused:
it's got to be some step you are missing.

in your own words what are you exactly doing in steps until you get the error? include all syncs etc. What OS are you on and what phone do you have. list steps as
1.
2. etc.

[Superguy]

Anyone else seeing an error with Diamond TF3D in NATF's Standard v4.0? I just flashed and I get an error that says "an unexpected error has occurred in Diamond TF3D Config.exe". I tried uninstalling it and reinstalling, soft resetting, and combinations of soft-resets and installing. Keep getting the same error. If I check the details there is something about "NullReferenceException". Not sure what any of this means. It worked with Standard v3.2.

NATF - this ROM is awesome, just want to get this one thing worked out and I will be a happy boy!

Yeah, I saw that. It crashes for me too.

NATF: I don't know why the ROM wasn't snappy for me out of the box. Could be a disagreement with something in device ... don't know. Like I said, it worked better once I ran advanced config and reimported my config xml file.

I ran into something else with the weather DB editor and weather app. Weather DB editor wouldn't take another entry unless I exited the app and came back in. Sometimes, it'd take a few times for it to actually add the entry to the DB, even though I did it the same way every time. Also, when trying to add a city in the main weather app, it wouldn't jump correctly for reason in Germany if I tapped on a letter (M in particular ... was trying to add Munich). I had a big M stuck in the middle of the screen and it stayed at the beginning of the city list. US, Canadian and Korean cities were fine though.

As far as Exchange goes, like I said, I haven't been able to sync with it. It looks like I have to make some changes to my server since I require SSL and Exchange Mobile doesn't like that. Haven't had time to do that yet, so I'll do that in the next day or so. Running Exchange 2003.

Super

[rareness4]

Yes, but when i try to load fuzeberry v6 it wont work

When it wouldn't download for me before, I would make sure the screen was always on, so disable any backlight timers or anything that would cause the screen to go off before it downloads and see it that works. Remember TF3D still has to be disabled with this.

[agentredd]

ok, i reentalled v4 then herg theme v7 and touchflo stil wont launch. I disabled it before installing and it still wont wrk. but the touchflo that comes with the rom works.

[pkley]

Yeah, I saw that. It crashes for me too.

NATF: I don't know why the ROM wasn't snappy for me out of the box. Could be a disagreement with something in device ... don't know. Like I said, it worked better once I ran advanced config and reimported my config xml file.

I ran into something else with the weather DB editor and weather app. Weather DB editor wouldn't take another entry unless I exited the app and came back in. Sometimes, it'd take a few times for it to actually add the entry to the DB, even though I did it the same way every time. Also, when trying to add a city in the main weather app, it wouldn't jump correctly for reason in Germany if I tapped on a letter (M in particular ... was trying to add Munich). I had a big M stuck in the middle of the screen and it stayed at the beginning of the city list. US, Canadian and Korean cities were fine though.

As far as Exchange goes, like I said, I haven't been able to sync with it. It looks like I have to make some changes to my server since I require SSL and Exchange Mobile doesn't like that. Haven't had time to do that yet, so I'll do that in the next day or so. Running Exchange 2003.

Super

Weather Editor has had that issue for me over several different ROMS.

Exchange 2003 is working fine for me as well, also using SSL. It's rare for me to have an issue with Exchange after working out the initial bugs with the security certificate and general Exchange settings.

One issue I am experiencing is that it's starting to lock up on me every now and again. It won't even respond to the power button, only soft-reset. It was also happening with 3.2 and at first I wrote it off to Live Search, but it doesn't seem to be related. I use QuickMenu and WKTask. I've done a few minor tweaks with Advanced Config, like disabling the phone skin.

[Z_Tahir1]

Hey, I installed the V4 ROM Standard on my Fuze today, upgrading from 3.2 Standard, and have been experiencing issues. Sometimes Youtube would freeze. My phone has frozen like 3 times. The Wifi auto shuts its self off after 5 seconds from when I enable it.

Flipping up the screen for the keyboard is much zippier than it was, but sometimes that also freezes the phone up for a bit nwow.

What should i do? I am considering just going back to 3.2 Standard, is that possible? On that everything was working just fine.

Thanks for all the support NATF, loving you're tweaks but I'm experiencing some pretty nullifying nuisances at the moment. Any help would be great, I don't wanna have to reset the ROM to 3.2 before I sleep.

[CR7KB24]

it's got to be some step you are missing.

in your own words what are you exactly doing in steps until you get the error? include all syncs etc. What OS are you on and what phone do you have. list steps as
1.
2. etc.

I have stock Att Fuze and my computer is running windows xp

1. i go to active sync on my phone plug it in, start the sync and then just minimize that window

2. then i go through the stuff you need to check off, and i do everything that the HARDSPL program tells me to

3. then on my phone that colorful screen come up and then nothing happens it just sits at 0% and then a little while later the error pops up

Thanks for the help

[DNA]

I have stock Att Fuze and my computer is running windows xp

1. i go to active sync on my phone plug it in start the sync and then just minimize that window

2. then i go through the stuff you need to check off, and i do everything that the HARDSPL program tells me to
3. then on my phone that colorful screen come up and then nothing happens it just sits at 0% and then a little while later the error pops up

Thanks for the help

Don't keep the rom file in the same folder.

[entropy42]

I am not sure this is relavent, but when the Exchange sync feature was added to the 8525 ROM there was a note about it only working with Exchange 2007 or Exchange 2003 with SP3 applied if I remeber right. You might check that recent patches have been applied to your Exchange server. Even though they may not upgrade to Exchange 2007, they would have to be nuts to not apply current patches. It could be the new recent build used in this ROM needs some patch applied to Exchange 2003.

I just flashed 4.0 from 2.3. I have no issues syncing with Exchange 2003 SP2 (latest version of 2003) OTA or via USB.

[kahibbi]

Thanks, I went back and searched some more and found someone else had posted a different version of TF3D Config and it seems to work ok with this ROM.

jtsurfs ... can you point me in the direction of the newer TF3D Config? I have serached and keep finding in various posts the same version I currently have (0.6.7), which isn't working (as noted by yourself). I want to get rid of the email tab and rearrange others.

Thanks!

[rareness4]

jtsurfs ... can you point me in the direction of the newer TF3D Config? I have serached and keep finding in various posts the same version I currently have (0.6.7), which isn't working (as noted by yourself). I want to get rid of the email tab and rearrange others.

Thanks!

Just click the paper clip next to this thread in ROM Development page and scroll down to "diamondtf3dconfig[1].cab"

[kahibbi]

Just click the paper clip next to this thread in ROM Development page and scroll down to "diamondtf3dconfig[1].cab"

Thanks for the tip. I've been changing ROMs since my 8125 and I had no idea about the paperclip. I'm kind of embarrassed to admit it, but as I always say ... "it is what it is".

That one works perfectly! I'm continuing to try and get everything set up so that I can test this ROM throughout the day tomorrow.

[cheez]

V3.2 was excellent. V4 was just a great. So far no issues. Thanks NATF!

(using Touch Pro version)

Maybe one slight issue. In TF3d under Programs, the programs selection tags still appear under the category tags at the bottom. Was there in 3.2. Still here in 4. But I can live with it. Thanks for the great ROM!

[thimiost]

I use the full touch pro rom and indeed it is very steady and speedy
After a long time i don't have a Romeos rom in my tp

[TheWebMachine]

<snip>
The other one I noticed was after restoring a backup with PPCPimBackup. I have a lot of text messages (mainly ones I'm keeping for evidence against my ex-wife :D) and it didn't import them correctly. In some cases, it found a bunch of texts I supposed tried to send but never did. It looked like it was trying to rethread them and was coming up with a bunch of seeming random texts that didn't resolve until I clicked the thread. Saw a lot of activity at the bottom of the screen, like it was scanning threads or something. Didn't have this in 2.2 or 2.3.
</snip>

I can't remember if I explained this nuance about PIMBackup in this thread or another one. PIMBackup uses a rather sloppy faked "activesync" connection with POutlook to backup and restore data. It leaves POutlook to reindex and rethread EVERYTHING imported from scratch. After restoring data, allow the device to sit idle for up to 5 minutes without opening a POutlook folder. Then turn off and turn on the device. It should then be ready for use and everything should be as it was. Interrupting the reindexing process in POutlook usually results in it jumbling messages around because it is attempting to display and index at the same time...M$ doesn't seem to have planned for such an event! Reimport with the option to clear existing enabled and it will rebuild everything for you after clearing out the garbage.

----------

I'm going to download v4 now. I've been sick, so I won't get to install it until tomorrow. I hope I don't become doubly plagued when I do. ;) lol

~TWM

[DNA]

Did you remove the shortcut key for IM (fn + IM) in the registry or keypad.dll? How can I add the shortcut key back? Thank you

[ryan6603]

I have stock Att Fuze and my computer is running windows xp

1. i go to active sync on my phone plug it in, start the sync and then just minimize that window

2. then i go through the stuff you need to check off, and i do everything that the HARDSPL program tells me to

3. then on my phone that colorful screen come up and then nothing happens it just sits at 0% and then a little while later the error pops up

Thanks for the help

have you tried manual?

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from second attachment to the device and run it. then once the screen is black, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.

another thing it could be is that you are on a domain with folder redirection. I know it wants to be on a local drive. with folder redirection and offline files your desktop, docs are not really local. they are a redirection to a user folder on the server. just wanted to throw that out.

[xcsdm]

Did you remove the shortcut key for IM (fn + IM) in the registry or keypad.dll? How can I add the shortcut key back? Thank you

I'm using v4 Standard/Fuze. my Fn+Messaging(IM) shortcut key works as expected, and opens the OZ Communications IM Client. (Which I don't use, because I prefer Slick)

XC

[ecltech]

NATF,

I noticed a weird problem with the volume. If I hit VolUp or VolDown button the volume screen comes up and it shows the volume changing for the "RING" not SYSTEM. So I switch to SYSTEM, change the volume but it does not seem to affect the volume at all. Also, I use the SOUND shortcut from TF3D (see attached) and it's set to "NORMAL" but the volume is at 0%. I tried changing it to Vibrate, Silent and back to Normal but it does not affect the Volume% itself.

Also, not sure if this is an issue or not, but when I go to System -> Settings -> Device Info, I get the following attached screen... is this normal?

I hard reset the device this morning so this is just 4.0 without any changes/etc to the ROM.

[NotATreoFan]

Hey, I installed the V4 ROM Standard on my Fuze today, upgrading from 3.2 Standard, and have been experiencing issues. Sometimes Youtube would freeze. My phone has frozen like 3 times. The Wifi auto shuts its self off after 5 seconds from when I enable it.

Flipping up the screen for the keyboard is much zippier than it was, but sometimes that also freezes the phone up for a bit nwow.

What should i do? I am considering just going back to 3.2 Standard, is that possible? On that everything was working just fine.

Thanks for all the support NATF, loving you're tweaks but I'm experiencing some pretty nullifying nuisances at the moment. Any help would be great, I don't wanna have to reset the ROM to 3.2 before I sleep.

WiFi will not run if a USB cable is connected. As for freezing up, a very small number of people have reported it, so I would have to assume it's caused by a program you loaded... possibly a version that doesn't play nice with this new OS.

V3.2 was excellent. V4 was just a great. So far no issues. Thanks NATF!

(using Touch Pro version)

Maybe one slight issue. In TF3d under Programs, the programs selection tags still appear under the category tags at the bottom. Was there in 3.2. Still here in 4. But I can live with it. Thanks for the great ROM!

Check Post #4. The Restore Curtains CAB will fix this for you. I leave it as-is because it eliminates an extra top and bottom border in TF3D.

Did you remove the shortcut key for IM (fn + IM) in the registry or keypad.dll? How can I add the shortcut key back? Thank you

Nope, didn't touch it.

NATF,

I noticed a weird problem with the volume. If I hit VolUp or VolDown button the volume screen comes up and it shows the volume changing for the "RING" not SYSTEM. So I switch to SYSTEM, change the volume but it does not seem to affect the volume at all. Also, I use the SOUND shortcut from TF3D (see attached) and it's set to "NORMAL" but the volume is at 0%. I tried changing it to Vibrate, Silent and back to Normal but it does not affect the Volume% itself.

Also, not sure if this is an issue or not, but when I go to System -> Settings -> Device Info, I get the following attached screen... is this normal?

I hard reset the device this morning so this is just 4.0 without any changes/etc to the ROM.

This is a known issue, and Da_G is working on a solution. For the meantime, hit the VolUp or VolDown button, tap System, then adjust the volume by sliding your finger.

[paschott]

I have had 0 problems flashing in vista with the raphaelwrapper, probably flashed 30 times in the 5 days ive had this thing :)

Thanks - I'll check to see if I have the wrapper available on my box or get it. My card said it was formatted as FAT32 so I should not have had any issues and I tried with a completely empty card except for the file. I just remembered all of the trouble trying to flash a Wizard from Vista. Ugh.

[xcsdm]

NATF,

I noticed a weird problem with the volume. If I hit VolUp or VolDown button the volume screen comes up and it shows the volume changing for the "RING" not SYSTEM. So I switch to SYSTEM, change the volume but it does not seem to affect the volume at all. Also, I use the SOUND shortcut from TF3D (see attached) and it's set to "NORMAL" but the volume is at 0%. I tried changing it to Vibrate, Silent and back to Normal but it does not affect the Volume% itself.

Also, not sure if this is an issue or not, but when I go to System -> Settings -> Device Info, I get the following attached screen... is this normal?

I hard reset the device this morning so this is just 4.0 without any changes/etc to the ROM.

Yes, there are sound related issues, currently, it is believed that these issue are within the OS build used. It is being investigated, and a fix is hopefully forthcoming.

Also, search the thread before you post. (Albeit the ext rom is not something posted before). A simple search in this thread for "v4 sound" returned several items already covering this issue.
(Not trying to be too harsh, as I have done the same... just a reminder that the search is there, and that we should all use it)

[NotATreoFan]

Updated Post #4 with a possible fix for one issue, and a temporary workaround for another. Please read them. :)

[Enrique00]

Good Morning All:
Without security unlocking my device, which radio would you say is the best for my HTC Fuze? I live in WI, so I dont have 3G signal, so Im just wondering which one would work the best for me.

Thanks in advance for your help!

[entropy42]

Great job NATF! So far I'm having no issues with this release. It is much snappier than 2.3 especially GPS. As stated earlier syncing w/ Exchange 2003 SP2 works without issue. I set the sync profile using the WMDM wizard.

Here is the list of app I have installed on this build in case it helps others:

Chronos
DiamondTF3DConfig (version attached to this thread)
Google Maps
HTC_EnlargeTitleBar
Iris Browser 1.0.16
Klaxon
LiveSearch
MobiTV
OzIM
Pandora
PocketInformant 8.51
pRSSReader-1.4.4
S2U2-1.40-VGA
SplashID
SpriteBackup
Astraware Sudoku
TCPMP
Touch_Pro_Super_Arcade

[NotATreoFan]

Thanks - I'll check to see if I have the wrapper available on my box or get it. My card said it was formatted as FAT32 so I should not have had any issues and I tried with a completely empty card except for the file. I just remembered all of the trouble trying to flash a Wizard from Vista. Ugh.

I started using RaphaelWrapper with v4.0 because crappy AV products (read: everything but Eset's NOD32 ;)) detect CustomRUU.exe as a trojan, and won't allow it to be extracted from the RAR.

Don't worry about flashing through Vista... HTC updates their RUU with each new device, and the Raphael's CustomRUU runs fine in Vista.

Yes, there are sound related issues, currently, it is believed that these issue are within the OS build used. It is being investigated, and a fix is hopefully forthcoming.

Also, search the thread before you post. (Albeit the ext rom is not something posted before). A simple search in this thread for "v4 sound" returned several items already covering this issue.
(Not trying to be too harsh, as I have done the same... just a reminder that the search is there, and that we should all use it)

I also noticed the weird message on the ExtROM, but since our phone doesn't have one, it doesn't bother me.

[zai_hkman]

i have the same problem with u too, installation of tf3d config is completed but it can't be opened.

[rizaldi]

Since 4.0, my MediaNet setting keeps on reverting from wap.cingular to ims.cingular when I soft reset my device(Fuze). Is this a bug or just me?
Other than that, this has been great, GPS fix seems to be faster too. Thank you very much for your hard work NATF!

[rv2k]

Apologies in advance for any newbie questions here. I'm having an issue with the v4 ROM and MediaNET. As of 7 this morning (upgraded from 3.2 yesterday afternoon) Active Sync was "Waiting for network." I did a hard reset and now the id, password and domain settings for MediaNET are blank. Any ideas? I'm in the NY area.

[Captain_Throwback]

I am not sure this is relavent, but when the Exchange sync feature was added to the 8525 ROM there was a note about it only working with Exchange 2007 or Exchange 2003 with SP3 applied if I remeber right. You might check that recent patches have been applied to your Exchange server. Even though they may not upgrade to Exchange 2007, they would have to be nuts to not apply current patches. It could be the new recent build used in this ROM needs some patch applied to Exchange 2003.

I think that's exactly what it is. My company hasn't even updated our PCs to XP SP3 due to some compatibility issues, so I'm sure they haven't updated Exchange to SP3 for similar reasons. Well, I guess I'm stuck with 20xxx based ROM builds for now. :(

[wolfnumba1]

hey NATF great ROM i have been using it since i got my fuze i flashed your 3.2 rom the day I got my fuze, hey i just realized because I just flashed the 4.0 yesterday and setup the device again that some of the sounds that were in the 3.2 version are missing that I liked dont know the names of the missing ones they werent standard windows sounds they had to be sounds you added, anyway to get those audio files back from you? Keep up the great work

[AUTiger83]

Since installing v4.0, iGO8 won't boot. It briefly flashes the opening screen, then disappears. It is not running in the background. It just crashes.

It's the latest version, 8.3.2.64873. I know they made a lot of changes from the 8.0 series (e.g., changed from Telenav to Navteq maps, etc.).

I've since downloaded another ROM (name withheld . . . ha. ha.) and iGO8 is working again, so it is not solely a software issue.

Anyone else experience this? Any settings I should change?

Thanks, NATF, for the great work. Yours is always my preferred ROM. Newbie here, but impressed by your work.

[AvengerBB]

Since installing v4.0, iGO8 won't boot. It briefly flashes the opening screen, then disappears. It is not running in the background. It just crashes.

It's the latest version, 8.3.2.64873. I know they made a lot of changes from the 8.0 series (e.g., changed from Telenav to Navteq maps, etc.).

I've since downloaded another ROM (name withheld . . . ha. ha.) and iGO8 is working again, so it is not solely a software issue.

Anyone else experience this? Any settings I should change?

Thanks, NATF, for the great work. Yours is always my preferred ROM. Newbie here, but impressed by your work.

That same version of iGO works for me in NATF 2.3 but I did have to put a couple lines into my SYS.TXT to get it to work. Until then I had the same problem you did. I haven't tried NATF v4 yet, but my SYS.TXT is attached for your reference.

[zai_hkman]

anyone using v4.0 can start the TF3D config?
plx help

[rv2k]

Apologies in advance for any newbie questions here. I'm having an issue with the v4 ROM and MediaNET. As of 7 this morning (upgraded from 3.2 yesterday afternoon) Active Sync was "Waiting for network." I did a hard reset and now the id, password and domain settings for MediaNET are blank. Any ideas? I'm in the NY area.
Connecting to my laptop resolved the issue.

[entropy42]

I think that's exactly what it is. My company hasn't even updated our PCs to XP SP3 due to some compatibility issues, so I'm sure they haven't updated Exchange to SP3 for similar reasons. Well, I guess I'm stuck with 20xxx based ROM builds for now. :(

There is no SP3 for Exchange. The latest Exchange SP was SP2 released in Oct 2005.
http://support.microsoft.com/?kbid=836993

My company is running 2003 SP2 and I can connect with no issues. Does your Exchange server use SSL? Try going to the URL in your browser and checking the certificate. Does the cert come up as completely valid? Who is the signing authority? What is the signature algorithm?

[Captain_Throwback]

There is no SP3 for Exchange. The latest Exchange SP was SP2 released in Oct 2005.
http://support.microsoft.com/?kbid=836993

My company is running 2003 SP2 and I can connect with no issues. Does your Exchange server use SSL? Try going to the URL in your browser and checking the certificate. Does the cert come up as completely valid? Who is the signing authority? What is the signature algorithm?

The server does in fact use SSL. SuperGuy said his wasn't working either, and his server also uses SSL. Perhaps that's the issue? Activesync never gets to the prompt from my server telling me it needs to enforce Security policies on my device. Are you suggesting I check the server URL? That'll just take me to Outlook Web Access.

[ryan6603]

I think that's exactly what it is. My company hasn't even updated our PCs to XP SP3 due to some compatibility issues, so I'm sure they haven't updated Exchange to SP3 for similar reasons. Well, I guess I'm stuck with 20xxx based ROM builds for now. :(

there is no SP3 for exchange 2003. they are only up to SP2. exchange 2000 has a SP3

oops. already pointed out, sorry.

[jtsurfs]

anyone using v4.0 can start the TF3D config?
plx help

It is probably something to do with the version of TF3D Config you are using. Someone posted a different version shortly after NATF posted the comment for V4 being up.

[ryan6603]

wanted to see if anybody is have this issue:

i saw there was a delays in previous v's but it went away, for me at least, in v3.2. Whenever i answer the BT headset there is a long delay before i here audio in it (2-4 seconds) in v4. I even see that it is on the handset for a second before i even see it connect icon. v3.2 had zero delay if any 500ms. Using JawBone 2 Noise Assin.

[syntrix]

there is no SP3 for exchange 2003. they are only up to SP2. exchange 2000 has a SP3

oops. already pointed out, sorry.

He said XP SP3, not EX SP3. I see two people missed that :)

[entropy42]

The server does in fact use SSL. SuperGuy said his wasn't working either, and his server also uses SSL. Perhaps that's the issue? Activesync never gets to the prompt from my server telling me it needs to enforce Security policies on my device. Are you suggesting I check the server URL? That'll just take me to Outlook Web Access.

My server is also using SSL, so it is not SSL specifically. While you'll see the OWA interface from your desktop browser you'll be on the same server so you can check the certificate.

Also, you can try going to OMA on your phone browser if you navigate to https://your.server.name/oma.

[ryan6603]

He said XP SP3, not EX SP3. I see two people missed that :)

nope just reading earlier post on previous page

"I think that's exactly what it is. My company hasn't even updated our PCs to XP SP3 due to some compatibility issues, so I'm sure they haven't updated Exchange to SP3 for similar reasons. Well, I guess I'm stuck with 20xxx based ROM builds for now. :("

[entropy42]

He said XP SP3, not EX SP3. I see two people missed that :)

Or perhaps you missed this :)

I am not sure this is relavent, but when the Exchange sync feature was added to the 8525 ROM there was a note about it only working with Exchange 2007 or Exchange 2003 with SP3 applied if I remeber right. You might check that recent patches have been applied to your Exchange server. Even though they may not upgrade to Exchange 2007, they would have to be nuts to not apply current patches. It could be the new recent build used in this ROM needs some patch applied to Exchange 2003.

To which Captain_Throwback responded:

I think that's exactly what it is. My company hasn't even updated our PCs to XP SP3 due to some compatibility issues, so I'm sure they haven't updated Exchange to SP3 for similar reasons. Well, I guess I'm stuck with 20xxx based ROM builds for now. :(

So yes, Captain_Throwback says XP SP3, but he is directly referencing the post by dlweston who states Exch 2003 SP3.

[nableezy]

Anybody else experience the old notifications issue? I can change the sounds, but they do not stay through a soft reset.

Edit:
They do stay through a soft reset so long as I dont go back into sounds and notifications, if i go back it goes to what it was before.

[clavace]

since installing v4.0, igo8 won't boot. It briefly flashes the opening screen, then disappears. It is not running in the background. It just crashes.

It's the latest version, 8.3.2.64873. I know they made a lot of changes from the 8.0 series (e.g., changed from telenav to navteq maps, etc.).

I've since downloaded another rom (name withheld . . . Ha. Ha.) and igo8 is working again, so it is not solely a software issue.

Anyone else experience this? Any settings i should change?

Thanks, natf, for the great work. Yours is always my preferred rom. Newbie here, but impressed by your work.

see post 1037

[Superguy]

The server does in fact use SSL. SuperGuy said his wasn't working either, and his server also uses SSL. Perhaps that's the issue? Activesync never gets to the prompt from my server telling me it needs to enforce Security policies on my device. Are you suggesting I check the server URL? That'll just take me to Outlook Web Access.

Here's some links on how to fix it.

http://www.amset.info/exchange/mobile-85010014.asp
http://support.microsoft.com/?id=817379
http://discussion.treocentral.com/showthread.php?t=146952

Of course, be sure you work in your company's IT department and/or have permission to do this, or do it on your own personal server.

In its infinte wisdom, Outlook Mobile has issues if SSL is required for connection and forms based authentication (i.e. web page) is used. One of the pages explains that Activesync makes some internal calls that SSL supposedly screws up.

The last link discusses that the connection needs to be created on the PDA itself.

Generally, the fix involves either using a front end server to connect or having to redo the website in IIS and modifying the registry. It doesn't look fun and looks a bit time consuming. I'll have some time tonight to try it.

I haven't tried any of these, so if anyone is able to do it before I get a chance to, please report your experience!

On another note, don't know if it's been reported or not, but alarms were having issues this morning. I would try to turn it on with the time and date set, but when I hit ok, it wouldn't actually turn on the alarm despite it being checked. Soft reset took care of it.

Super

[xcsdm]

Just FYI,

I use Zimbra hosted by 01.com. They (Zimbra) support (reverse engineered) activesync with their service.

My Activesync/"Exchange" syncing is working beautifully.
I say this because I know that their version of activesync is based off of Exchange 2003, not sure which SP if any...

As a plug for their service. $50/year/user covers service with full Windows Mobile, Outlook, and Web Access with 2GB of storage.

http://www.01.com

XC

[silvertorch]

Flashed 4.0 Fuze Standard last night and its an awesome ROM!

Anyone else no able to use the Calendar button on the Home screen?

When I press it, it lights up green, but thats it.

Also, are you able to cook in HTC Camera 6.8, its fromt he XPERIA ROM?

Besides that, great ROM.

Thanks again NATF!!

[tadevinney]

Updated Post #4 with a possible fix for one issue, and a temporary workaround for another. Please read them. :)


Am i not seeing updated post? didnt look like anything changed

[rddcarlos]

I bought my Fuze on Dec.03 and last week the power button stop working so i called CS they transfered me to warranty... there they asked for my IMEI and told me that the phone was actually purchased on Nov.13 and returned to the store on Nov.25 i was like ...WHAT... the "brand new" phone that i paid for $$$541.88 is really a used phone.... of course i got upset and told them i wanted my money back, even mentioned class action lawsuit and so on.... they said warranty only sends out "refurbished" phones, but because of my unique case they got a manager from CS and after about an 30mins on hold they said to fax them the receipt and i would get a "brand new full kit att Fuze" in two days.... I'm waiting for it so i'll let you guys know what happen... but my point is... If you have any doubts about your phone being new or not just call warranty and have them run the IMEI and they can tell you your phone's history....

[entropy42]

Flashed 4.0 Fuze Standard last night and its an awesome ROM!

Anyone else no able to use the Calendar button on the Home screen?

When I press it, it lights up green, but thats it.

Also, are you able to cook in HTC Camera 6.8, its fromt he XPERIA ROM?

Besides that, great ROM.

Thanks again NATF!!

Calendar button on home screen works just fine here.

[CR7KB24]

Don't keep the rom file in the same folder.

ok, ya, that might be why, i will try and get back to you, Thanks!

[kennyb123]

Am i not seeing updated post? didnt look like anything changed

He meant post #2.

[jaredangus]

Before mentioning the glitches, I want to say thank you again.

My data connection can't decide whether it exists or not after flashing v4. Sometimes it exists, sometimes it doesn't. Whether or not my data connection works seems to be independent of it's existence. I tried installing/uninstalling various things to isolate the cause of the change, but the change always seemed to happen when I wasn't doing anything at all.

Also, my outgoing email sometimes works and sometimes does not (it is a regular old POP3 email account).

[Lostwarriorram]

I think that's exactly what it is. My company hasn't even updated our PCs to XP SP3 due to some compatibility issues, so I'm sure they haven't updated Exchange to SP3 for similar reasons. Well, I guess I'm stuck with 20xxx based ROM builds for now. :(


Are we talking about Windows 2003 Server SP3 or Exchange 2003 Server SP3? Either ways, there are no SP3 for both windows 2003 server or exchange server 2003.

Never mind, this has been spoken by too many people.

I am repeating my question, what would be the sweet spot page file size for this ROM? Whats default?

[kennyb123]

So, it's been two months, and I've posted this before... does everyone STILL not know how the heck to SUCCESSFULLY force Opera to view the non-mobile versions of websites? How hard can this be? Maybe everyone else is in the know but me... link me to the instructions please. I've seen plenty of opera:config solutions that didn't do squat for the Fuze.

Thanks.

[strahil]

Is there a special software to show the remaining battery power in percentage and colour or is this a default behaviour in Raphael? I'm asking cause I can't see it on the Diamond and I want to use it there as well.

I've searched the thread but couldn't find any answers.

P.S.
Great ROMs, terrific job!

[ryan6603]

So, it's been two months, and I've posted this before... does everyone STILL not know how the heck to SUCCESSFULLY force Opera to view the non-mobile versions of websites? How hard can this be? Maybe everyone else is in the know but me... link me to the instructions please. I've seen plenty of opera:config solutions that didn't do squat for the Fuze.

Thanks.

I have no problem opening non mobile pages in Opera. i even see flash. i go can to my home page and view the header and everything else. compservpro.com

[MSHampton]

As with everyone else, thanks for the ROM.

I'm now running 4.0 and the only strangeness I have is that I run PhotoContractsPro which has a today plugin that sits at the middle bottom and when you press it it pops up a window (not full screen) that allows you to switch profiles. This worked with 2.3 but now I can see the window pop up but then TouchFlo forces it's way back to the top and covers it.

Any ideas?

[silvertorch]

Is there a special software to show the remaining battery power in percentage and colour or is this a default behaviour in Raphael? I'm asking cause I can't see it on the Diamond and I want to use it there as well.

The app is called FInixNOver Battery Meter.

[tadevinney]

Quote:
Originally Posted by tadevinney
Can anyone confirm if Video Share is working? Is there anything special I need to do on Fuze to enable it?

As long as you have Video Share on your account, tapping the Video Share icon in the dialer should work. I can't confirm this since I don't use Video Share, and all my frenemies have Verizon.
__________________

So has Anyone gotten video Share to work?

[silvertorch]

I have no problem opening non mobile pages in Opera. i even see flash. i go can to my home page and view the header and everything else. compservpro.com

Same here, I have no issues pulling up non mobile sites using Opera.

kennyb123 I know that some sites will actually sense a mobile browser and forward you to their mobile site. Engadget does this for sure, it does provide a link at the bottom of the page for the Full version.

What are some of the sites that Opera can't display in "full" mode?

[gnice18]

I'm having a weird soft-reset issue. Whenever I have Windows Media Player playing songs, If I do anything with the volume control buttons or click on the volume icon in the top bar,,, my phone soft resets. I did hard reset after burn and it still happens. Anyone else having this problem??? I think it happens when I have my volume turned all the way up.


I am having this problem as well. Have a stereo bluetooth headset and 4 out of 5 times when playing in media player i get a soft reset. Very frustrating as I use my Fuze mostly for music.

[Captain_Throwback]

My server is also using SSL, so it is not SSL specifically. While you'll see the OWA interface from your desktop browser you'll be on the same server so you can check the certificate.

Also, you can try going to OMA on your phone browser if you navigate to https://your.server.name/oma.

How do I check the certificate? I can access OWA from Opera on the Fuze, and it works fine. OMA isn't set up for my Exchange Server. And since I don't work in my company's IT dept, I can't follow any of the recommendations that SuperGuy posted. It seems that there's no solution.

EDIT: I've also tried connecting my phone to my work computer directly after a hard reset, and just trying to Activesync to my local computer's Outlook, and I get a 80070008 error message. Maybe I need a newer version of Activesync? I'm using 4.5 Build 5096. I'll check on the M$ page and see if they have a more recent build, but I'm just grasping at straws at this point.

[gnice18]

Anyone else no able to use the Calendar button on the Home screen?

When I press it, it lights up green, but thats it.



Same Problem here

[hidden_dragon]

Same Problem here

Chances are, you installed a theme without upgrading the manila files. This is NOT ROM related at all!

[Captain_Throwback]

Chances are, you installed a theme without upgrading the manila files. This is NOT ROM related at all!

Actually, my "Contacts" soft key is working on and off. When I press it, the phone acts like its going into the Contacts screen (I see the window title appear briefly) but then it takes me right back to the Home screen. I haven't installed anything on the phone. This also happens when I press the "All People" button from the "People" TF3D tab. I think a soft reset will fix it, but I could see the same issue happening with the Calendar soft key.

[hidden_dragon]

Actually, my "Contacts" soft key is working on and off. When I press it, the phone acts like its going into the Contacts screen (I see the window title appear briefly) but then it takes me right back to the Home screen. I haven't installed anything on the phone. This also happens when I press the "All People" button from the "People" TF3D tab. I think a soft reset will fix it, but I could see the same issue happening with the Calendar soft key.

The particular "calendar" softkey problem was related to installing a theme + missing upgraded manila files. Your contacts screen problem is something else. I don't see anyone else having that problem (unless I just missed a post). But the calendar problem I experienced when I was on v3.2 and installed HERG's older theme. I then upgraded the manila files and the issue was gone.

[gnice18]

Chances are, you installed a theme without upgrading the manila files. This is NOT ROM related at all!

no theme at all, just a glass clock cab

[jaredangus]

Upon further research I found this link regarding outgoing mail problems:

Click this messy link (http://www.microsoft.com/downloads/details.aspx?familyid=d9d71b2e-d2dd-44f2-86e5-1e53aad7fb7a&displaylang=en&tm)

When I attempted to install the update, it said my version of Windows Mobile is incompatible :(

Would this problem be fixed in this ROM automatically or do I need to revert to some old crappy WM version to apply this patch if I want to ever send email again?