Using OMAPClock.exe for Prophet?!

[RonLion]

HI,
does anyone uses OMAPClock.exe for Overclocking?
What is the latest version and on which rate does the prophet runs fast but stable?

CHeers,

[hskeik]

i don't know about last version but i had the 0.2 version, maybe it's old one, but maximum i could increase my processor for 264 mhz not more, but realy i don't know if it's useful or not, cause i didn't see differance. what about other users?

[deltav13]

I do but after you turn off the device or reboot the device you have to execute the app again the only solution is to put it in the startup file. I used it on my Jasjamin and i use it at 209 MHZ, you can put more but you might experience reboot or app failure. :D

[Inal]

for alternatif you can use batterystatus, more info on mainscreen and can overclock omap too, i try till 299mhz(sometimes), and works good, you can setting for auto overclock at wakeup

can download here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#DownloadBet a

[dioxda2]

HI,
does anyone uses OMAPClock.exe for Overclocking?
What is the latest version and on which rate does the prophet runs fast but stable?

CHeers,
POST #12 (http://forum.xda-developers.com/showpost.php?p=3964790&postcount=12)

[deltav13]

Remember ppl overclocking, reduces main processor life, if you use it you might diminish the life of your device, take care, you do this at your own risk.

[dioxda2]

Remember ppl overclocking, reduces main processor life, if you use it you might diminish the life of your device, take care, you do this at your own risk.

1. yes, it will be a bit too harsh for the processor,

2. it does consume more power,

3. it will freezes on some apps,

4. over over-clocking (over 264Mhz) may brick the device,

5. for fun ....


POST #12 (http://forum.xda-developers.com/showpost.php?p=3964790&postcount=12)

[dioxda2]

PLEASE TRY IT FOR FUN ONLY~~~~ ( tested with Speed King 2 Lite new version.)


INSTALL AND SOFT RESET.

THE DEVICE WILL RUN IN 264mHZ.....

UNINSTALL IF YOU WISH.. :)

p.s.

please take care the power consumption. :)

Use on your own risk.


POST #12 (http://forum.xda-developers.com/showpost.php?p=3964790&postcount=12)

[csjneek]

i keep my prophet overclocked at 286mhz with batterystatus for a year now.
i never had any unstability problems. these only occur only if using speed above 286mhz, ex:293.
At 286 works very nice, i'm so used with this speed that I'll never downclock my device :)

cheers

[ninakaira]

Nice app....i had my mpv 600 sitting for a while now, and i have use it now with new rom and it's working fine at 264mhz

[chavdar]

PLEASE TRY IT FOR FUN ONLY~~~~ ( tested with Speed King 2 Lite new version.)


INSTALL AND SOFT RESET.

THE DEVICE WILL RUN IN 264mHZ.....

UNINSTALL IF YOU WISH.. :)

p.s.

please take care the power consumption. :)

Use on your own risk.

Hi dioxda2,

So the app will not be affcted from soft resets and the device will away run with 264 MHz? Could you please post a link to the cab?

Thanks in advance!

[dioxda2]

Hi dioxda2,

So the app will not be affcted from soft resets and the device will away run with 264 MHz? Could you please post a link to the cab?

Thanks in advance!

Read " MUST READ.txt " first

password = dioxda2



1. below 264 is fine,

2. want to try higher? I had tested. Prophet bricks!!!!

3. use @ your own risk, default clock is 264

4. want to change the clock lower? run omap_OverClock from the startmenu/programs folder,

5. it will keep in 264 even after softreset,

6. it will keep in 264 even after power on,

7. use wakeapp to clean the notice service if neccessary (if popup occurs after uninstall),

8. or hard-reset to clean if you wish.

wakeapp =

http://www.google.com.hk/search?q=wakeapp&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:zh-TW:official&client=firefox-a


have fun~!


dioxda2 - XDA forum 2006

[hekimbaba]

I am using at 286 mhz and boost maximum 299 mhz. 312 makes phone unstable.

[dioxda2]

I am using at 286 mhz and boost maximum 299 mhz. 312 makes phone unstable.

DON'T just look @ the digits,

dare you try this Omap.exe with higher than 264?

I did push too much and a result of bright screen eternally......:(

Batt. status is not SAME as omap.

so, listen or not.... you bet ! :)

[chavdar]

DON'T just look @ the digits,

dare you try this Omap.exe with higher than 264?

I did push too much and a result of bright screen eternally......:(

Batt. status is not SAME as omap.

so, listen or not.... you bet ! :)

Thanks dioxda2!
I used Battery status for about 2 years but I also notice significant difference between battery status and Omap.exe - about 15 MHz - > The version of Omap that I have is showing less than battery status and I think the correct value was shown by battery status

[hekimbaba]

DON'T just look @ the digits,

dare you try this Omap.exe with higher than 264?

I did push too much and a result of bright screen eternally......:(

Batt. status is not SAME as omap.

so, listen or not.... you bet ! :)

Yes my friend When I try 312 mhz phone seem ok but when you try open something it is lock. I am trying this Qtek s200 G4. 299 mhz working very stable. Overclocking could be changeable at same systems. İt depends on cpu manufacturing time etc etc.

[wapvirus]

Yes my friend When I try 312 mhz phone seem ok but when you try open something it is lock. I am trying this Qtek s200 G4. 299 mhz working very stable. Overclocking could be changeable at same systems. İt depends on cpu manufacturing time etc etc.

What app are you using to over clock with ?

[fautorr]

I have some XP with Home Screen Plus Plus(used to be Bat.Status)the only Problem I had, was that you cannot turn it on at the same time with Manila 2D, because it works as a today plugin and Manila turns everything off. Does OMAPClock.exe work like this?

[lyndel4]

I have some XP with Home Screen Plus Plus(used to be Bat.Status)the only Problem I had, was that you cannot turn it on at the same time with Manila 2D, because it works as a today plugin and Manila turns everything off. Does OMAPClock.exe work like this?

OMAPClock is different its a seperate aplication not a today screen plugin like bat.Status so yes it will work with Manila 2D :)

[lyndel4]

The most I gotten was 276 now am using 240 is stable and no problems over that and and my Device hangs I think its a Rom thing on other roms I can go up to 299 lol but on WM 6.5 the most I tryed is 240 anybody use WM 6.5 whats the limit ur Device can take then when u were using WM 6.0 and 6.1?

[fautorr]

OMAPClock is different its a seperate aplication not a today screen plugin like bat.Status so yes it will work with Manila 2D :)

Thank you, testing it with WM 6.5. Very interesting effect under 87 Mhz) Looks like entering into BootLoader.)) SoftReset didn´t help. 6.1 used to work with low CPU speeds. 6.5 does not!))

[hekimbaba]

What app are you using to over clock with ?

Normally home screen plus plus. But I got same results with omapclock.exe too. My cpu doesnt allow over 312.

[chalin]

great app. but when I press the power button, and again, it automatically clocks down to 180mhz, is there some fix for that ? ? :cool::cool:

[dioxda2]

great app. but when I press the power button, and again, it automatically clocks down to 180mhz, is there some fix for that ? ? :cool::cool:

really? let me take a look... ;)

[dioxda2]

great app. but when I press the power button, and again, it automatically clocks down to 180mhz, is there some fix for that ? ? :cool::cool:

OOOPs, I forgot to put the wake-up notification, well its done now....

please use this cab... the previous one will be replaced soon :)



1. below 264 is fine,

2. want to try higher? I had tested. Prophet bricks!!!!

3. use @ your own risk, default clock is 264

4. want to change the clock lower? run omap_OverClock from the startmenu/programs folder,

5. it will keep in 264 even after softreset,

6. it will keep in 264 even after power on,

7. use wakeapp to clean the notice service if neccessary (if popup occurs after uninstall),

8. or hard-reset to clean if you wish.

wakeapp =

http://www.google.com.hk/search?q=wakeapp&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:zh-TW:official&client=firefox-a


have fun~!


dioxda2 - XDA forum 2006

[hekimbaba]

Thanks dioxda2 for your great supports. :)

[chalin]

yeah, thank you for all, before I've used "omapClock" but with that I must overclock it ofter reboot, after wakeup just everytime. Now its solved, thaks ! ;)

[NonEZ]

my device is runnig in 312 mhz ,yeah maybe you dont believe in me but is real and i have proves

[dioxda2]

my device is runnig in 312 mhz ,yeah maybe you dont believe in me but is real and i have proves

Take good care man ~~ you are lucky :)

[poenicus]

i had problems with 252, now overclocking at 240 mhz.
In device info the speed reports 195. Is it normal?

[wfsiew]

Read " MUST READ.txt " first

password = dioxda2

hello... i'm trying your omapclock, may i hv your cab file password?
tq

[dioxda2]

hello... i'm trying your omapclock, may i hv your cab file password?
tq

there is no password for the cab file but the zip only.

dioxda2

you had it already.....

:confused: