ROM Update not stored (after splxploit)

[mikahtc2]

Hi,

My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.

I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000

Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?

Thank you for your help,
Mika

[eddiehor]

Hi,

My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.

I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000

Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?

Thank you for your help,
Mika

Hi,Mika maybe I can help u to upgrade ur SSPL,busy now maybe I will send to u later,K

[eddiehor]

Hi,

My Trinity (s300+) stops working yesterday night : it was buggy, so I decided to do a soft reset, but then after it starts I get the splash screen for 1 second and it turns off. I tried a hard reset but nothing change.

I tried "splxploit" in order to have a HardSPL installed and then to flash a ROM through a SD but the problem is that the update looks OK but is not stored in the phone:
- when I entered the bootloader I had :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
- after running "splxploit" I had on the screen:
TRIN100
IPL-USPL
TRIN100
SPL-1.20.Olipro
- after doing a soft reset and reentering the bootloader I have again:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000

Is there something wrong with what I am trying to do, or should I start considering that it may be now a brick ?

Thank you for your help,
Mika

Mika,please download from here http://forum.xda-developers.com/showthread.php?t=293632


Down load SSPL-Trin.Zip and unzip it,or try to use "WIN RAR" software to unzip,copy SSPL-Trin to ur device,click on it bootloader will prot out,plug in cable wait for Sync(Screen will show "USB"),download rom in progress,follow instruction untill finished,pull out cable soft reset ur device

Good Luck,Mika

From Eddie (Malaysia)
Email : hsc_68@yahoo.com

[mikahtc2]

Thank you for your answer.

Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).

I can also start with the bootloader mode and this is why I tried the 'splxploit' .

Hope there is still something to do to heal it
Mika :)

[eddiehor]

Thank you for your answer.

Unfortunately, my problem is that I cannot run a program on my Trinity since I cannot start it anymore (I just got the splashscreen, and it turns off).

I can also start with the bootloader mode and this is why I tried the 'splxploit' .

Hope there is still something to do to heal it
Mika :)

Hope this will help ur device wake up again.:)


1.)RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46 .30 .11_108_Ship.exe

Down load this and extr it,u can see few files and look for the file name RUU.xxx.NBH file,and just rename it as TRINIMG.nbh

2.)now you must use Mini SD,format it to FAT 32,with no Volume Label(go to folder right hand click and format it to FAT 32 at FAT colum,after that erase the volume label etc "KINGston"farmat card.

3.)copy file TRINIMG.nbh to your Mini SD Card,now ur screen blank right?slot in MiniSD,now boot from card,you will see "loading"follow by "checking" then it will prot out some like Boot file checking at you screen,press power botton to start boot from card,plug in your cable before start,wait for completed,soft reset you device,now ur device wake up again.

*** if want to boot win 6.1 new Rom,now you can follow previouse format that I already sended to you,any problem please reply to my mail please.Mika

I like to see ur device wake up again.


From : Eddie

[mikahtc2]

Thank you again Eddie,

There was no file attached to your message.

I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000

Serial

Nothing about "loading" or "checking" ... :-/

When you said "boot from card" in your message, did you mean entering the bootloader as I did ?

Thank you for your help,
Mika

[eddiehor]

Thank you again Eddie,

There was no file attached to your message.

I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000

Serial

Nothing about "loading" or "checking" ... :-/

When you said "boot from card" in your message, did you mean entering the bootloader as I did ?

Thank you for your help,
Mika

Hi,Mika that I found that you format to FAT(Should format to FAT 32)just at the colume of FAT click down the arrow to select FAT 32 when u right hand click and look for format,and here is the Asia Original Rom I found


http://rapidshare.com/files/46816571...1_108_Ship.exe

Extract RUU.Signed.nbh rom file and rename it to TRINIMG.nbh,copy to Mini SD Card (Your Mini SD Card can not have any file in there,Except TRINIMG.nbh file only),on bootloader,plug in Charger and slot in ur card,screen will show u previousely what I'am show u press power/on-off botton and start untill step by step completed

Keep trying Mika


Good Luck

From : Eddie

[eddiehor]

Thank you again Eddie,

There was no file attached to your message.

I tried anyway with another ROM package, rename the nbh file to TRINIMG.nbh, copy it to an SD card formatted FAT with no label. I start the bootloader "Camera Button" + "Power button" + "Reset" button, but only get:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000

Serial

Nothing about "loading" or "checking" ... :-/

When you said "boot from card" in your message, did you mean entering the bootloader as I did ?

Thank you for your help,
Mika

Your set is it ok

From : Eddie

[jksro]

Hi Mika and all,

I have same problem as u, on my Trinity!
How was a solvent?

thanks for your answer