GMail, Hotmail, Exchange, Newsgroups, and RSS all on the same Windows Mobile (WM5 and up) reader, with HTML, links, & attachments all working.
It is not a new reader- it’s qmail (qmail3) version 3.0.7. I am not an expert, and don’t have a clue as to all of the filter settings and crap that you can do with it, but I did figure out how to get all of the above working in ONE PROGRAM! Below are the workarounds and settings that I discovered.
I previously used Qusnetsoft reader for NNTP and RSS and Flexmail 4 for email. I was unhappy with the Flexmail viewer (no touch scrolling; scroll bar with stylus only) and email navigation from open mail to folders a bit of a pain. Qusnetsoft took too long to sync (nice interface though). I had used QMail3 before and liked it, but still use Hotmail and was bummed by MSN no longer supporting POP.
First… Download QMail (http://handheld.softpedia.com/get/Internet-Utilities/Email/QMAIL-8837.shtml) for WM.
Then, for each account, In QMail, <Menu<Tool<Account<Add Account
GMAIL
Name=Gmail (or whatever)
Class=mail
Incoming=POP3 (or IMAP, but I’ll cover POP3 settings)
Outgoing=SMTP Then tap “OK”
In General Tab…
Incoming=pop.gmail.com
Outgoing=smtp.gmail.com
Name=your name
Address=your email
Reply-To=your email
In User Tab…
Username=your Gmail Login Name
Password=your GMail Password
Check Authenticate
Username=your Gmail Login Name
Password=your GMail Password
In Details Tab…
Incoming mail Port=995
Secure=SSL
Outgoing mail Port=465
Secure=SSL
All other Settings are fine or adjust at your discretion.
HOTMAIL
First off, if you are not living in the United Kingdom, Canada, Australia, France, Japan, Spain, Germany, Italy, or the Netherlands (Where MSN has made POP for hotmail available again) you’ll need to change your location in Windows Live or Hotmail to reflect that you now live in one of those places. The site I used for these settings is http://www.mydigitallife.info/2009/01/22/hack-to-enable-hotmail-pop3-and-smtp-support-instantly-for-all-countries/ Once this is done, the Qmail settings are as follows…
Name=Hotmail (or whatever)
Class=mail
Incoming=POP3
Outgoing=SMTP Then tap “OK”
In General Tab…
Incoming=pop3.live.com
Outgoing=smtp.live.com
Name=your name
Address=your email
Reply-To=your email
In User Tab…
Username=your Hotmail Login Name
Password=your Hotmail Password
Check Authenticate
Username=your Hotmail Login Name
Password=your Hotmail Password
In Details Tab…
Incoming mail Port=995
Secure=SSL
Outgoing mail Port=25
Secure=SSL
All other Settings are fine or adjust at your discretion.
Exchange
Not all exchange servers will work this way- your admin must have access enabled. I work for a school district and they have a web interface. Here are the QMail settings that get me in.
Name=Work (or whatever)
Class=mail
Incoming=POP3
Outgoing=SMTP Then tap “OK”
In General Tab…
Incoming=www.your domain name.web access suffix eg. www.avondale.k12.az.us
Outgoing=.your domain name.web access suffix eg. www.avondale.k12.az.us
Name=your name
Address=your email
Reply-To=your email
In User Tab…
Username=your Domain/Login Name eg. Avondale/JPerkins
Password=your Exchange Password
Check Authenticate
Username=your Domain/Login Name eg. Avondale/JPerkins
Password=your Exchange Password
In Details Tab…
Incoming mail Port=143 (auto selected)
Secure=none
Outgoing mail Port=25 (auto selected)
Secure=none
All other Settings are fine or adjust at your discretion.
Newsgroups
Name=newsgroups (or whatever)
Class=news
Incoming=NNTP
Outgoing=NNTP Then tap “OK”
In General Tab… (Check with your service provider for NNTP access settings- here’s some for AT&T)
Incoming=news.sf.sbcglobal.net
Outgoing= news.sf.sbcglobal.net
Name=your name (any name)
Address=your email
Reply-To=your email
In User Tab…
Username=your service provider’s login eg. yourname@sbcglobal.net
Password=your service provider’s Password
Check Authenticate
Username=your service provider’s login eg. yourname@sbcglobal.net
Password=your service provider’s Password
In Details Tab…
Incoming mail Port=119 (auto selected)
Secure=none
Outgoing mail Port=119 (auto selected)
Secure=none
All other Settings are fine or adjust at your discretion.
RSS
Name=RSS (or whatever)
Class=rss
Incoming=RSS
Outgoing=Blog Then tap “OK”
Then tap “OK” and Then tap “OK” again
Select RSS from drop-down menu, tap-and-hold in the blank white space and select Subscribe to Feed…
Enter Feed Site eg. www.npr.org Tap Next
The Name should auto select (if you are connected to the internet). Tap “OK”
All other Settings are fine or adjust at your discretion.
I use an HTC Kaiser (AT&T Tilt) w/cooked diamond rom 6.1 and I don’t have a data plan- I have WIFI at home @ work, so I needed something that could load everything onto my device for offline viewing when out-n-about. If you open a message then tap ok, then <Menu<Edit<Select All then tap-and-hold any off the messages, select <Mark<Mark Download, then do a Sync or Roundup again (you can find these by tapping and holding icons on the bottom toolbar) you can download full emails/news articles/etc. Hope this helps someone
nate