Peripheral Question [Archive]

petesavva

24th January 2009, 02:07 AM

Hi guys,
Iapologize if this is in the wrong forum.
I am considering purchasing a 7500 but i need to know if i can run ext-vga and a mouse simultaneously.
thanks

Pete

techntrek

24th January 2009, 03:19 AM

Yes, you need to buy the 4-in-1 accessory. You can use all things at one time.

petesavva

24th January 2009, 03:22 AM

thanx man...

EAlvarado

24th January 2009, 04:25 AM

Yes, you need to buy the 4-in-1 accessory. You can use all things at one time.

Good day.
Also you can consider to buy the cradle, it has the VGA out, two USB connector for a Keyboard and a mouse, an 3.5mm for the audio out. the connector for miniUSB sync and one for the charger.
Also you can use a bluetooth keyboard and mouse. But for this is better to search in the forum to find the ones that was previously tested

So this is very useful.

Regards.

medanshop

24th January 2009, 08:11 AM

my dopod u1000 lcd touchscreen is broken.
i want to hard reset my dopod u1000.
and i buy Dopod 4 in 1 cable to connect USB Mouse to setup.

Step 1 : Tap the screen to set up your Windows Mobile-based device.
(i click USB Mouse to tap here is a successfully)

http://medanshop.net/files_uploads/usb/5.jpg

Step 2 : Align Screen ???
how can i detect position mouse to align my screen?

http://medanshop.net/files_uploads/usb/6.jpg

My Dopod 4 in 1 Cable

http://medanshop.net/files_uploads/usb/7.jpg

example :
http://www.techshout.com/images/mus2-mouse.jpg

petesavva

24th January 2009, 02:06 PM

great info guys thanks.
now....does anyone have one in the uk for sale? :D

mikealder

27th January 2009, 03:21 PM

Expansys have one listed for the newer 7510 device see http://www.expansys.com/p.aspx?i=163513 I would give them a ring to check the same cable fits your 7500 (I would expect it to work but best to make sure) - Mike

responderman

27th January 2009, 09:09 PM

my dopod u1000 lcd touchscreen is broken.
i want to hard reset my dopod u1000.
and i buy Dopod 4 in 1 cable to connect USB Mouse to setup.

(i click USB Mouse to tap here is a successfully)

how can i detect position mouse to align my screen?

My Dopod 4 in 1 Cable

I seem to remember that Michys 4.1/5.1/6.1 dont ask you to align the screen so just reflash with one of them????