frances_qp
25th January 2009, 09:41 AM
hi! i am from the philippines.I bought a secondhand tytn II last october. My sim card worked with this phone and so I didnt know that the unit was sim locked to a certain network until I changed the sim card a few days ago. Ive read from different sites that I can do the sim unlocking of my phone personally but I'm really new to this thing and I'm afraid that I'll "brick" my phone. I already upgraded my phone to wm6.1. I read form you site an instruction on how to unlock the phone but I think it works for wm6 phones only.Here are some information about my phone:
R 1.65.17.56
G 25.83.40.02W
D 3.28.00.00
KAIS130 MFG
SPL-1.0.Olipof
CPLD-8
If you know of any way to unlock a wm6.1 phone, please help me...or if there's none, please just send me instructions on how I can change my os to wm6 so that I can follow the instructions below:
Thank u in advance!
Btw,here are the instructions I mentioned:
Instructions
============
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here: http://forum.xda-developers.com/showthread.php?t=349375
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
7. Once Windows Mobile has booted up it will show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
You should see this:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to jocky_wilson@hotmail.com
Your Unlockcode = 12345678
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
9. Once Windows Mobile has booted up it will again show the "Simlock" window. Now enter the 8-digit unlockcode and your phone is permanently SIM unlocked
10. Download the original radio from http://forum.xda-developers.com/showthread.php?t=349375 to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to some other great tools which I will release soon: "Kaiser SuperCID" and "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW
R 1.65.17.56
G 25.83.40.02W
D 3.28.00.00
KAIS130 MFG
SPL-1.0.Olipof
CPLD-8
If you know of any way to unlock a wm6.1 phone, please help me...or if there's none, please just send me instructions on how I can change my os to wm6 so that I can follow the instructions below:
Thank u in advance!
Btw,here are the instructions I mentioned:
Instructions
============
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here: http://forum.xda-developers.com/showthread.php?t=349375
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
7. Once Windows Mobile has booted up it will show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
You should see this:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to jocky_wilson@hotmail.com
Your Unlockcode = 12345678
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
9. Once Windows Mobile has booted up it will again show the "Simlock" window. Now enter the 8-digit unlockcode and your phone is permanently SIM unlocked
10. Download the original radio from http://forum.xda-developers.com/showthread.php?t=349375 to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to some other great tools which I will release soon: "Kaiser SuperCID" and "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW