PDA

View Full Version : ROM: 3rd WM 6.5 ROM for hTC P3300-P3350_Artemis&Love[WM6.5 Beta 21159] 17-Feb 09 !!!


dioooi
14th February 2009, 05:51 AM
3rd rom from dheewatara-s:

http://www.pdamobiz.com/forum/forum_posts.asp?TID=200154&PN=985


http://rapidshare.com/files/199086096/Pawaj_65.7z.html
+CHOME
+ ie6
- No MMS
- PDA+radio


http://rapidshare.com/files/199080532/Pawaj_65_M2D.7z.html
+CHOME
+ M2D IPhone Style
+ ie6
- No MMS
- PDA +radio

abshie
14th February 2009, 07:40 AM
I have installed and testing now.
The above pictures shows Program Free Memory as 16.68MB but actual is as below.

At Fresh boot Storage Free 44.44MB and Programs Free 22.63 MB

Download Link from Rapidshare with IE6: http://rapidshare.com/files/197880124/WM6_5_3rd21159.rar

jeffreyljb
14th February 2009, 10:35 AM
Download in progressing,will flash later today & give feedback...

3rd rom from dheewatara-s:

http://www.pdamobiz.com/forum/forum_posts.asp?TID=200154&PN=985



http://www.mediafire.com/?jibyejhwmmg
+ ie6
- No MMS
- PDA Part only


http://www.mediafire.com/?gjwyltz3w4o
No ie6

randythered
14th February 2009, 08:48 PM
Although my Artemis shows 60 % free program memory, this ROM is still painfully slow.

koLESS
15th February 2009, 12:31 AM
i've download now n will try... :)

neotarum
15th February 2009, 12:45 AM
Thanks for the rom!
Like user above, runs very slow on the main menu but once in file explorer etc it's just as fast.
Time to upgrade the phone?? :(

rossomalpelo
15th February 2009, 10:10 AM
I have tried all 3 version of this ROM,
nice look but very very slow on my artemis.
today TITANIUM good, Honeyconbs slooooow other apll quite fast,
IGO8 breeze, tt7 slow.
I hope that some1 can make this fast than today.

koLESS
15th February 2009, 10:58 AM
it was lag & makes my phone hang... this ROM requires more RAM...
anyway thanks uploader... something new...

funkazio
15th February 2009, 12:49 PM
tested it for 20 minutes.
TOO SLOW on Artemis.

d-signet
16th February 2009, 12:17 AM
downloaded and tested for a day or so now

the titanium is better than in previous versions, seems to run smoothly and integrates well at last...good to see the clock finally making a propper appearance in there

also the first chance to play with the new honeycomb interface.

unfortunately the jury is still out on this one.

my view is that it's more of a hinderance than anything else at the moment.
This totally replaces the start menu. Click on the start button and you're taken straight into the honeycomb interface. I wasn't expecting this behaviour from it...i thought it would be more of a today plugin replacement or something, and if it's going to behave like this on new roms it needs to be
a)quick
and
b) easy for you to find your programs or settings that you want.
Personally i dont think it does this yet.
You can click and hold to bring any app into the "favourites" part of the comb, which means you can now "pin" your favourite apps...mcuh like your last used apps used to automatically appear at the top of the start menu.

Unfortunately i think finding anything more than you favourite 5 or 10 progs would quickly become a real pain in the ass.

let me give a quick random example

on a "classic" style rom, let say you want to go to the "SMS SETTINGS" app....you'll go to start , settings, hit the communications tab at the bootom and choose SMS SETTINGS

on this i'll go to start, straight into the honeycomb. From experience i know that it's not in here (which is good becuase this is now a looong page to look in) so i choose the SETTINGS cell. now all i can see is 7 cells and remember there are no tabs here anymore so this is ALL of your settings. I've got About, backlight, bluetooth, buttons , certification, and clocks and alarms. Anything else i have to start randomly scrolling and searching so i start moving downwards. Eventually find it on the 12th cell on the left That's 12 'Down clicks'. If i wanted WLAN SETTINGS or something i would have to do a lot more scrolling. Everything is alphabetically sorted which helps, but it's a 3 colum system and so you still need to read ALL of the available options and you need to know EXACTLY what that app is called (is it TOMTOM or NAVIGATION? Is it under T or N ? etc...you get the gist)

I hope they are still experimenting with this interface becuase i think it looks good and COULD, if done right, be a really nice feature for the WM6.5 system...but it still needs some fundamental work before it works well. Remember how, from the concept art, we through it would be a 2d scrolling 'intellingent' list...it's not. It's stricly up and down alphabetical.

I can't quite put my finger on what it IS that's wrong with it...but there is SOMETHING...it just takes too lonk to find what you need at the moment. Maybe it's just unfamiliarity and it'll all become clear after a few days use, after all i've had 5 years of experience with the old system...the same as lots of people switch vista and XP's interface into win2k mode becuase they know where everything is. I always plead with those gus to stick with it and learn the newer systems becuase they usually DO make sense....but this time i cant see it yet

The new lock mechanism also needs some work. they've obviously tried to emulate a slide-to-unlock mechanism without making it TOO similar to the iphone....unfortunately this means that you get the small blue slider we've all seen on the screenshots at the top-center of the screen and sliding it 1cm or 2 to either the left or right unnlocks. I personally think this gives too much scope for accidental unlocking. I mentioned in another thread a while back about how a "shake to unlock" feature would be self defeating. the point of a lock is to make sure that when the phone wakes up becuase of incomming texts or whatever the phone doesnt totally wake up and end up accidentally resetting all of your calendar appointements or calling people while it's in your pocket....you need it to be HARD to unlock accidentally, but not hard to unlock intentionally. The balance is not quite right here either, same as the honeycomb.

it's still in beta and hopefully the whole thing just needs those last few "tweaks" to the functionality and ergonomics before it too "makes sense" but right now i'm more than willing to switch back to dhee's last manilla rom....it's just easier to use. I hope i'm right and that this rom is in BETA for both reliabiliy AND functionality reasons.

theres a lot of potential, but it isn't there yet.

these comments are ALL down to the mew 6.5 system, NOT dhee's rom, which seems to have done everything it can with what it's been given. Considering the clumsyness of the new interface etc this is as good as i could hope for a 6.5 beta rom to be, and i will install his next rom without ANY hesitation.

for anyone wanting to try the new features out, this is the rom to go for, but i wouldn't blame anyone for not keeping it for too long

thanks again dhee for a great rom, i just hope you get an improved system to pass on to us next. I'll probably leave this one for another day or so to see if it grows on me, jstu like i gave XP and vista's new interfaces a chance.

d-signet
17th February 2009, 10:02 AM
he's now updated it with an M2D version, link : http://pirun.ku.ac.th/~fscinrn/Download/Pawaj_65_M2D.7z

will flash and let you know, i'm not convinced there's enough room on this rom for M2D too but who knows, he usually pulls it off well :)

NOTE the download is ONLY an NBH file

rossomalpelo
17th February 2009, 03:02 PM
I have flashed 3 times my artemis with this ROM but always, after reboot wake up one error and auto reboot, so, for me is not working
I hope that someone can fix it.

Statist
18th February 2009, 03:43 AM
I have flashed 3 times my artemis with this ROM but always, after reboot wake up one error and auto reboot, so, for me is not working
I hope that someone can fix it.

Same result ... And i flash once - device reboot, show me white screen, show error message and reboot again. Back to YuE WM 6.1 firmware. Waiting for stable release.

d-signet
18th February 2009, 09:54 AM
yeah, the M2D version didnt work for me....reverted back to his earlier 6.5 Beta 2 version with M2D becuase i dont think the honeycomb and titanium is quite ready yet

arinjayw
18th February 2009, 12:09 PM
very very slow.. also the menu is not very much clear

evansx6
18th February 2009, 01:31 PM
he's now updated it with an M2D version, link : http://pirun.ku.ac.th/~fscinrn/Download/Pawaj_65_M2D.7z

will flash and let you know, i'm not convinced there's enough room on this rom for M2D too but who knows, he usually pulls it off well :)

NOTE the download is ONLY an NBH file

This one is not from dheewatara, and was one of the first roms to include WM6.5.

So far DJ M2D WM6.5 5.0 UL is the quickest and smoothest.

d-signet
18th February 2009, 03:14 PM
i found DJ M2D WM6.5 5.0 UL to be the same speed as the 2nd rom with M2D from dheewatara, but dheewatara's rom has the newer camera version (with panorama mode) and a slightly newer rom version if i remember correctly. I'm sticking with that one for now

GaD_nv
20th February 2009, 04:17 PM
we beg pardon for my terrible English :-[ , I wanted hear there is version room without additional programs ( light ) plz give reference

splashbit
26th March 2010, 01:57 PM
Hi ppl,

All the links give error .... not found....

Can someone give me a positive link?

qasi
19th April 2010, 01:36 AM
Hi any re-uploaded links?

Thanks

nilesh61181
28th February 2011, 08:24 PM
Can some one please provide me the image for htc artemis p3300 wm6.5

august2500
29th April 2011, 05:49 PM
Can someone give the link again to this ROM?

v11
4th May 2011, 11:13 AM
Need link with wm6.5 for Arte100.....


Thanks.

splferon
7th August 2011, 10:25 PM
Hi,

I've looked for a stable windows mobile 6.5 ROM for my O2 XDA Orbit (Artemis 200/P3300).

Here's my software/OS details:

ipl 3.04.0001
spl 3.04.0000
gsm 02.67.90
os 3.4.0.0

I found sevral roms, but when attempting to install them (needless to say, I was in bootloader mode), the setup terminated after 3% of progress mentionning [error 270] (for all image files).
After a while searching for the answer to my problem, I gathered my bootloader needs to be replaced/upgraded, but I'm a little shy to do this (I want to upgrade but I'm afraid to end up with a brick).


Can someone help me please.

Ta!