need Rom and help plz

[m-graphique]

Hello

sorry to ask this. but I need best Rom for my HTC TYTN1, because I always find myself with a problem I posted here :

http://forum.xda-developers.com/showthread.php?t=484219

Now I have the problem of two call buttons that do not work! just sometimes

I ask you if it is possible to redo my htc to zero! as he emerged from the factory for the 1st time!

I see no other solution.
help me please

Thank you


http://img140.imageshack.us/my.php?image=dsc00483.jpg

http://img134.imageshack.us/my.php?image=dsc00485.jpg

http://img134.imageshack.us/my.php?image=dsc00489.jpg

[boog]

It sounds like you might be having some sort of hardware or button issues.

I don't know if it would help to do a hard reset or not. Make sure you back up your contacts and stuff first, or they will all be gone! You can hold both "softkey buttons" the buttons above the windows and ok buttons and hit reset, or go into system settings and run clear storage. But again, I'm not sure if that would help.

Or if your running a custom rom, you can try flashing your operators stock rom, or one of the at&t ones in my signature.

But if the buttons are going crazy, I'm still leaning towards something going on with some of the keys, or possibly even the hardware keyboard.

Has the phone been dropped? I have been reading some things about the ribbon cable coming undone or going bad that can cause odd issues.

Maybe someone else has experienced this, and can chime in?

[m-graphique]

Hi boog321

First, thank you for your answer

I just tried to restore but my buttons do not work :(

I downloaded now
Hermes Official AT & T shipped with WM6 Radio 1.54.07.00

I will Try, even if it is in English I think! what I need one in French! but essential to get my HTC well now :)

I already have a hard spl v7 and market,
it's good ?! or I should to do somthing after or I can do other hard !

Lately I bought a accesoire but I think that is the problem! by what I had the problem before you!
Cable Audio Multifonctions YC A300

and as I am new here and I have a little knowledge with the ROM and flash, I ask your help plz

thank you

[boog]

You could try going to start>settings>system>clear storage

that is the equivalent to a hard reset.

or see if you can remove the software for the accessory.

[m-graphique]

hi ! :(

I just install your 2 Rom's and still same problem :(((((

what I must to do !!

[boog]

hi ! :(

I just install your 2 Rom's and still same problem :(((((

what I must to do !!

It sounds like your buttons are dead :(

I've never had one of our phones apart yet, maybe somebody else here could point you in the right direction for instructions or direct you towards someone that could repair it.

I'm sorry that I can't help you beyond this.

[m-graphique]

I noticed
is that all the buttons in the front does not work, just the buttons of directions and ok works.

Now I want to know how to downgrade please, to get back to original rom / radio / spl and bootloader possible!

thx boog321

[boog]

You can find a bunch of that stuff in the wiki. Hermes wiki (http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes)

Available Original Shipped WM5 ROM Versions (http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades)

Available Original Shipped WM6 ROM Versions (http://wiki.xda-developers.com/index.php?pagename=Available%20Original%20Shipped% 20WM6%20ROM%20Versions)

Available Extracted Radio Upgrade Only (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms)

Hopefully it has the one from your original provider listed.

[m-graphique]

thx again boog321

I tried a few ROM's but still same problem.
story by if can you please guide me to install windows 5!

thank you

[boog]

Follow the link I gave above for WM5, then pick the one for your language and flash, just like the others.

[m-graphique]

that is what I do,
I run normally my ROM and after gives me Error 260 no answer the phone!

for info I have :

HERM200
IPL-1.04

HERM200
SPL-2.10.olipro

[boog]

Maybe make sure both computer and phone are rebooted, then make sure activesync is connected to the phone. It needs to send commands to the phone.

If that doesn't work, I may be able to strip the rom down so it could be flashed via sd card. Just let me know, but to flash via sd card, it must be formatted fat32, and be 2 gig or less.

[ultramag69]

ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.

Cheers...:D


I still reckon its a hardware problem though.

[boog]

ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.

Cheers...:D


I still reckon its a hardware problem though.

I was thinking if it is like the at&t rom, it would need to be stripped then compiled back into a .nbh. Since it comes as an .exe

[pixelvandal]

Sounds to me like it's a D-Pad problem, rather than a ROM problem.
Have u experienced any white-screen problems.
There is a thread dedicated to D-Pad problems, just search XDA.
I have repaired several TYTN 1s with either D-PAD or WSOD problems using the instructions gathered on this forum.

[ultramag69]

Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...

[boog]

Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...

Your, right, I had a huge brain fart! I was thinking of when I was playing with stripping the radio on my own. But, it had been so many beers ago!

Only difference is, that I use 7zip to extract it :D

[m-graphique]

Hi

Thank you for your answers

I dont know how, but I see that the buttons still works! just that sometimes and rarely now does not work!

I installed ROM version 3.62 / Radio 1.38.00.10

just the problem is that I found in English. and I'm good with windows and French and I already azerty keyboard ...

possible to change language of my TYTN without refueling ROM please?