No WLAN due to Erased EEPROM****SOLVED****

[SuperSport]

hello superspot
Have a look here !!!!!!!!!
http://www.news4gsm.com/?p=4632Thank you again, but it appears this is only for unlocking the phone. It does not appear to dump the complete eeprom, which is what we are searching for. But thank you for doing more research on this matter. :D It helps to have more eyes looking for an answer.

[gushinam]

I have similar thread for Blackstone http://forum.xda-developers.com/showthread.php?t=542426 . More and more I read different threads, more and more I come to the conclusion that HTC use this black hole with WiFi EEPROM, for making money on parts. For you guys, good luck with sorting this out. Just let us know if you find good programmer.

[gruptnt]

I have similar thread for Blackstone http://forum.xda-developers.com/showthread.php?t=542426 . More and more I read different threads, more and more I come to the conclusion that HTC use this black hole with WiFi EEPROM, for making money on parts. For you guys, good luck with sorting this out. Just let us know if you find good programmer.

you think is htc ...
or as still update the rom unofficial results in a loss of warranty ...
everything is possible

[gruptnt]

I disassembled my trinity
attached photos mainboard

[passaretti1]

than we must have forever the trinity that not connect with wi-fi ????

[mi7]

Hello I read around that many have had the same problem and
assistance in sending htc solved with the replacement of
"Sub Board"?

[gruptnt]

wlan chip is an Texas Instruments
WL 1251 A

http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123

http://focus.ti.com/lit/ml/splt148/splt148.pdf

[SuperSport]

I just brought this over from the Blackstone thread so it was noted here:

To be sure it is not Software related.

Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)

Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.

I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)

I find it very interesting that the Trinity has the EXACT same registry entry. Also, the exact same WLAN Radio. So, is there a different WLAN Radio that is having the same issue (I don't remember the Hermes one), or is it solely the TNETW12511 that has the issue? Would be nice to help narrow it down a bit.

Could it be that by using these dumped ROMs that we are inadvertantly flashing code for a different WLAN Radio that is corrupting our eeproms? Maybe there is a small part of code hidden within the DUMPS that still remains? Just some thoughts... This problem seems to be happening more and more since WM6.5?

But I also realize it may be happening more and more because more people are flashing now than ever!

[gruptnt]

I just brought this over from the Blackstone thread so it was noted here:

ok but this assumes that if you reinstall the original ROM of Trinity all returns to normal

[arpcpro]

On my trinity (non-working WLAN) with WM6.5 I have that same registry key. The only difference is mine only has one slash between "E5006}" and "TNETW12511".

When I launch the "wrlsmgr" from the windows folder I only get the options to turn on bluetooth or phone. Nothing else appears.

[arpcpro]

I disassembled my trinity
attached photos mainboard

I had already found some pics of trinity board. But now I don't know where are the 7 JTAG connections. On Hermes board, 4 of those connections are then connected to resistors. So on trinity board it is not next to that rectangular empty place because there are no resistors there.
First 2 pics are of trinity. The other 2 are from hermes jtag.

[passaretti1]

for resolv this iussue i must replace the chip of wlan?

[gruptnt]

Hermes and trinity have similar hardware
but
for wlan
into hermes is managed to
chip wl 1250 + wl 3422

into trinity
is managed to
chip wl 1251 + "fea1ti68dvv3" (unknow chip)

know another HTC which manages the WLAN with this chip?

[SuperSport]

ok but this assumes that if you reinstall the original ROM of Trinity all returns to normal

I'm sorry, I think my post was not clear.

What I meant by it was that I found it interesting that many of the phones that are having WLAN errors seem to have the same WLAN Chip. Maybe the chip is the issue. Maybe flashing some of the recent WM6.5 ROMs is causing corruption specifically on this chip? TNETW12511

If we can find the cause of the corruption, then we can prevent future issues.

[SuperSport]

for resolv this iussue i must replace the chip of wlan?

We don't believe so. We think there will be a Software Fix for this, but at the moment, it does not exsist.

For the Hermes, they were able to fix it with a software flash. We are trying to come up with that for Trinity.

[passaretti1]

marry christmas to all

please solve this iussue i am desperate

[binht611]

HELP!!! WHO can help me slove this probleam??? my wifi still can't turn on !!!!:confused::confused::confused:

[SuperSport]

I finally found TRINDIAG.nbh!!!

I don't know if this can help, but I wanted to share it so as many people as possible can see what they can do with it.

WARNING!!!!
DO NOT USE THIS ATTACHMENT IF YOU DO NOT KNOW WHAT YOU ARE DOING!!!!

THIS MAY BRICK YOUR PHONE, SERIOUSLY!!!!

Also be aware that it WILL Hard Reset your phone. I don't know what other things it does????

With that said, I've run it on my phone, but I'm unable to figure it out all the way. It did Hard Reset my phone & Reset Call Timers, but it booted right into windows after re-setup.

When I ran Device Info, it said that my Part Number was invalid, ChecSum1 Invalid, S/N invalid, MBSN Invalid, OK Flag Invalid, & MAC was all F's.

It has a function to Write a NEW MAC, but from my research, it appears that we need an HTC PC Software to interface with the phone to accomplish that.

Good Luck, and I hope this helps to find a WiFi fix...

Maybe we can use part of this nbh to lnb using MTTY???

[SuperSport]

WooHoo! Getting Closer.

MTTY connects when in Diag Mode. I'm able to send a MAC address, but it states that the Signature is Wrong. Anybody know what that means?

[zoko]

WooHoo! Getting Closer.

MTTY connects when in Diag Mode. I'm able to send a MAC address, but it states that the Signature is Wrong. Anybody know what that means?

i wish to Know supersport!!! :-(

[arpcpro]

WooHoo! Getting Closer.

MTTY connects when in Diag Mode. I'm able to send a MAC address, but it states that the Signature is Wrong. Anybody know what that means?

Yupi, best fiding ever that trindiag. A possible answer to that question might be this problem they had while developing hermes fix:

http://forum.xda-developers.com/showpost.php?p=1235911&postcount=7
Olipro - Originally Posted by austinsnyc View Post
any word on this fix yet?
there's a checksum on the EEPROM we need to figure out... if you have a friend, or someone willing to dump their EEPROM for you to recover it, then we can do something, but your phone will take on their MAC Address (not that it'll matter unless you two cross paths on the same network)

pof's
If we don't find how to calculate the checksum in a few days I will provide mine, don't worry.

[arpcpro]

Some other info about the signature:

1) see which is the EEPROM signature on a working device (task 37 ff)

http://forum.xda-developers.com/showpost.php?p=1187013&postcount=10
Seems that you have erased the EEPROM:

03/24/2007 23:53:25 [K :: KERNEL] HTC Nand Read!
03/24/2007 23:53:25 [K :: KERNEL] Kernel: EEPROM signature=FF FF FF FF FF
03/24/2007 23:53:25 [K :: KERNEL] HTC Nand Read!
03/24/2007 23:53:25 [K :: KERNEL] Kernel: EEPROM signature Old=FF FF FF FF FF
[...]
CertVerify: TIACXWLN.dll trust = 2
no EEPROM no WLAN!!

On a normal hermes this looks like this:

05/01/2006 00:00:00 [K :: KERNEL] HTC Nand Read!
05/01/2006 00:00:00 [K :: KERNEL] Kernel: EEPROM signature=50 12 EE 0 2
05/01/2006 00:00:00 [K :: KERNEL] Kernel: EEPROM1 Checksum=0xbd4ccc54
05/01/2006 00:00:00 [K :: KERNEL] HTC Nand Read!
05/01/2006 00:00:00 [K :: KERNEL] Kernel: EEPROM signature Old=50 12 EE 0 2
05/01/2006 00:00:00 [K :: KERNEL] Kernel: EEPROM2 Checksum=0xbd4ccc54

[gruptnt]

WooHoo! Getting Closer.

MTTY connects when in Diag Mode. I'm able to send a MAC address, but it states that the Signature is Wrong. Anybody know what that means?

YEAH !
This is good !!!
an question

which cable u use?

usb ?

now i don't have time to test
but i want to build an serial cable

[SuperSport]

I used the USB Cable. Serial may make a difference.

If you connect MTTY from the Main Diag Screen, then type TASK 32, you get a DIAG Prompt. Not sure what all I can do from there, but maybe DUMP??? :):):) Seems any command I send does not work. :(

I've connected to the phone dozens of times now, and after all that, I'm still able to start up the phone and use it, less WiFi, of course. (I still recommend only experienced users try this, just in case)

I've tried connecting with Olipro 1.30 and with the Stock IPL/SPL. Nothing so far, but I'm sure one of you guys will have some ideas. :D

From other sites, I've read where there is a Factory ROM that restores EVERYTHING, and it's flashable from this Trindiag.nbh SPL.

[SuperSport]

PS: This Trindiag is a pretty cool tool! Lots of good tests, etc... ;)

REPEAT: Only use if you know what you are doing... Hehehe, more than I do... :o

The Software does look for a serial cable in a few places, so maybe that's going to help some how.

[arpcpro]

How are you sending the MAC address? With "emapiWlanMac 01 02 03 04 05 06"?

What about the result of rbmc (Read back the memory content from the specified address to the host). Are you able to dump anything else or do you still get an empty file?

You still have the same IMEI, working 3G and bluetooth?

[SuperSport]

How are you sending the MAC address? With "emapiWlanMac 01 02 03 04 05 06"?

What about the result of rbmc (Read back the memory content from the specified address to the host). Are you able to dump anything else or do you still get an empty file?

You still have the same IMEI, working 3G and bluetooth?

I'm sending the MAC by:
Boot from Trindiag.nbh
Tap Center (Action) Button to start DIAG
Connect USB Cable (USB will show at top white/green band)
Connect MTTY using USB - After it connects successfully, don't type anything
Scroll Down to Write MACAddr and tap Center Action Button
Notice MTTY is now asking for a MAC Address
This is when I type it and get the Signature Error

Using the same method, except Write MBSN, it WORKS! :D I am able to send the Mother Board Serial Number Successfully! But beware, instead of Zero's, it is letter O's.

By Writing the MBSN, it fixed quite a few items in the Diag Device Info Screen, but not the MAC Address. :(

Still no success getting RBMC working within Diag

IMEI, 3G, and Bluetooth work fine still. I can make and recieve calls, etc...

DANG, it's getting Closer!!!!

In MTTY at the DIAG> Command Prompt, I cannot figure out any commands that work. Any Ideas??? I've tried Task Commands, etc.., nothing works yet.

[SuperSport]

Can somebody with a working phone please do me a favor?

Can you please post the first three octects of your MAC Address? I just want to be sure I am using the correct MAC for my phone. My understanding is that we should all have the same first 3 numbers, and the last 3 are different. Is that correct?

I got my MAC from my Router AFTER the phone died, so I want to be sure I got the correct one. Everything I try to write fails.

So, here's what I recommend others to try. Again, only for the daring...

Boot into the Diag
Run Device Info and see if your MB Serial is OK.
If it's bad, try writing it - Mine wrote fine
then try writing the MAC and see what you get. - This is where mine fails! :(

[Th3Hunter]

00:18:41:26:XX:XX is this enough ? i can send you my full MAC by PM ? just ask :)

EDIT:
SO if i want to RUN the DIAG tool what i have to do ? Format my SD and put it in there after that boot into tri-color screen ?

[arpcpro]

Correct. First octet for HTC should be:

00-09-2D (hex) HTC Corporation
00092D (base 16) HTC Corporation
No 23, Hsin Hua Rd.
Taoyuan City,
330
TAIWAN, REPUBLIC OF CHINA

Don't forget to try inserting the MAC in reverse like it is written in the flash dumps. And with "-" or ":" between.
00:09:2d:ef:e2:48 is a valid mac address for hermes. MAC address 00:09:2d:f1:f2:d3 reports EEPROM signature "50 12 EE 0 2" with "task 32 ff".

Also try with the station id, from HTC:
[W00:00:10:401]WLANMSG: FW Version = Rev 6.0.2.71 Station Id=00-18-41-00-0D-67

00:18:41 HighTechCo # High Tech Computer Corp

You can also try to write it with 0x... like the output of this post:
http://forum.xda-developers.com/showpost.php?p=3718638&postcount=23

EDIT: To check MAC: First turn on your wireless on the phone: then go to settings->connections->wireless lan->advanced

[SuperSport]

00:18:41:26:XX:XX is this enough ? i can send you my full MAC by PM ? just ask :)

EDIT:
SO if i want to RUN the DIAG tool what i have to do ? Format my SD and put it in there after that boot into tri-color screen ?

Yes, exactly

Format your SD to Fat32
Copy TRINDIAG.nbh to the SD Card (FYI it also worked from my 8GB SDHC! Go Figure!).
Boot Into Bootloader Mode
Trindiag will take over and start
On the first Screen, tap your Center (Action) button
This will take you to the MAIN Diag Screen
There will be the option to Write your MACAddr

[SuperSport]

Don't forget to try inserting the MAC in reverse like it is written in the flash dumps. And with "-" or ":" between.I've tried all different combinations, and forward/backward. It only accepts 12 characters total, so will need to be only 002245688d07, etc...

But everytime I enter my address, I get Wrong Signature error message on MTTY and Phone Screen, and the phone stops responding. I have to reboot it to get into it again. Please see Attachment

[Th3Hunter]

Here i present the results from the Device info screens TRINDIAG.nbh:
Notice i have lots of invalid entries but still got working Wi-Fi, MAC is shown as FF's but i do have a valid mac, i did not try the write mac option because i can lose it who knows,this is from me for now, if i can do something more... i will :P
EDIT: when i run the tool it hard-reset my device , zero all timers , i also run a test called S58 which i do not know what is testing,after that everything seems to work as usual, i lost all my data so be sure to make a back-up!

[SuperSport]

Here i present the results from the Device info screens TRINDIAG.nbh:
Notice i have lots of invalid entries but still got working Wi-Fi, MAC is shown as FF's but i do have a valid mac, i did not try the write mac option because i can lose it who knows,this is from me for now, if i can do something more... i will :P
EDIT: when i run the tool it hard-reset my device , zero all timers , i also run a test called S58 which i do not know what is testing,after that everything seems to work as usual, i lost all my data so be sure to make a back-up!

How strange! That's exactly what my screen looked like. Different IMEI of course. I wrote the MB Serial number to the phone, and it fixed a couple of things, but still no MAC working. Also, no matter what I try, I cannot write the MAC to the phone. I get "Wrong Signature" on MTTY and "Wlan update NG[0xFFFFFFFF]!" on the phone.

Yes, anyone planning to run this, be sure to backup all your data. As per my post where the file is attached. It WILL Hard Reset your phone.

[Th3Hunter]

How strange! That's exactly what my screen looked like. Different IMEI of course. I wrote the MB Serial number to the phone, and it fixed a couple of things, but still no MAC working. Also, no matter what I try, I cannot write the MAC to the phone. I get "Wrong Signature" on MTTY and "Wlan update NG[0xFFFFFFFF]!" on the phone.


Maybe this is due to countless flashes we've performed and they changed some parts of the device , maybe all phones (those being flashed with custom ROMS ) will have the same results ? Some one else please could post his/her results here so we can compare

[gruptnt]

same equal error into trindiag
so
i have reflash wlan eeprom
when relaunch trindiag
no error
but s/n no good
(is different to real)
of course info8 all ok (see back post)
i think trindiag is ok (change mac addr) if no flash wlan (original error)
:(

also we need an good wlan eeprom so return to first problem read an a good eeprom

4 supersport wow curiosity where u found trindiag?

[arpcpro]

Don't know where supersport got his trindiag. But mine came from http://8g.cn/Search.aspx?Keywords=trinity
I sent a mail to the guys of that chinese site asking them if they could provide us something else for trinity. Like factory test roms or another tool but they didn't reply.
The pdf service manual I don't remember where it came, but I already had it a month ago. Although the pdf didn't mentioned anything about MAC address.

And yes, even if we were able to write the mac address succesfully we still have the original problem that is the erased eeprom from the wlan. trindiag.nbh is too small to contain the eeprom. At least the hermes eeprom comes in a 257kb file and trindiag only has 192kb.

[Woland2001]

Who tried this: http://www.news4gsm.com/2009/12/14/polar-box-2-version-2-33-released-4632

[Th3Hunter]

Who tried this: http://www.news4gsm.com/2009/12/14/polar-box-2-version-2-33-released-4632


I did , but it does not run on my computer, i'm using XP , and maybe it is for vista or needs something else i don't know
and if it works the trinity is not between the supported models and the only feature for HTC phones is UNLOCK, NO FLASH support
so it is useless !!!

[SuperSport]

4 supersport wow curiosity where u found trindiag?

I've tried to find it for a LONG time, but never could. The other day, I searched for DIAG progs for Other Phones, and came up with the site arpcpro came up with. Not sure why the TRINDIAG never came up in searches. Anyways, glad to finally have it. I'm sure it will eventually come in handy for future. ;)

[SuperSport]

Don't know where supersport got his trindiag. But mine came from http://8g.cn/Search.aspx?Keywords=trinity
I sent a mail to the guys of that chinese site asking them if they could provide us something else for trinity. Like factory test roms or another tool but they didn't reply.
The pdf service manual I don't remember where it came, but I already had it a month ago. Although the pdf didn't mentioned anything about MAC address.

And yes, even if we were able to write the mac address succesfully we still have the original problem that is the erased eeprom from the wlan. trindiag.nbh is too small to contain the eeprom. At least the hermes eeprom comes in a 257kb file and trindiag only has 192kb.

Yes, the Service manual has been around for a long time, but I could never find the Trindiag.nbh that it refered to. I was glad to finally run into it.

I think you are 100% correct arpcpro, I think we need the Factory Test ROM to fully flash the EEPROM.

I was in a chat session the other night with an HTC Tech, and ALMOST got them to send it to me, but they abruptly dropped out of the conversation. I presume they were caught chatting and cut me off. I was VERY close I think. I'm sure it's just a matter of finding the correct person that is willing to email the file.

[gruptnt]

;) Happy New Year to all ;)

I think it is an interesting document

[gruptnt]

;) Happy New Year to all ;)

I think it is an interesting document

and now look here

http://wiki.openmoko.org/wiki/Openmoko_on_HTC-Dream

------> wget http://ftp.o2s.ch/pub/openmoko/firmware-wl12xx/wl1251-nvs.bin <------

is our eeprom?

[Th3Hunter]

I'm not sure that this is going to work for us, after all it is a linux module, and from linux to WM there is a big hole in between :( but if someone could figure out something .. i hope i'm wrong.

[gruptnt]

I'm not sure that this is going to work for us, after all it is a linux module, and from linux to WM there is a big hole in between :( but if someone could figure out something .. i hope i'm wrong.

I implemented the file in the EEPROM. but there is the same problem
WLAN turns on , LED lights turns on but does not find access points

i think nvs is hardware eeprom is no module

[Th3Hunter]

I implemented the file in the EEPROM. but there is the same problem
WLAN turns on , LED lights turns on but does not find access points

i think nvs is hardware eeprom is no module
What about the mac address ? The Diag tool ? did you try them to see what information you can get ? mtty also ? an info 8 command ?

[gruptnt]

What about the mac address ? The Diag tool ? did you try them to see what information you can get ? mtty also ? an info 8 command ?

mac is ok
diag is ok (no error)
info 8 is ok

... wait i want to analyze the log 37 ff ....

[Th3Hunter]

mac is ok
diag is ok (no error)
info 8 is ok

... wait i want to analyze the log 37 ff ....
How did you implemented the bin file into the EEPROM? And one more question Why are you using the "nvs" file instead of "fw" file ?

[gege997]

SLP-1.30.Olipro stated for me : WLAN ERROR

I flashed RUU_Trinity_HTC_WWE_1.23.405.2_103_6275_1.38.00.11 _108_Ship from HTC site, and wlan now works fine, but bootloader still says WLAN ERROR.

Any explanation for this?

[gruptnt]

How did you implemented the bin file into the EEPROM? And one more question Why are you using the "nvs" file instead of "fw" file ?

ok
firmware file is not eeprom hardware
firmware file is is implemented into windows mobile see "Fw1251r1c.bin"

i have implemented file nvs replacing into eeprom
but does not change the situation!
see swau005a.zip

[arpcpro]

@gege997 Thanks for tip. I don't have an explanation. But I saw several cases where the WLAN ERROR message appeared with OliPro HSPL1.3 and it disappeared after downgrading to OliPro HSPL1.2.
But in those cases the WLAN worked although there was the error message. I think that might be your case. After flashing with the RUU_Trinity_1.23..., OliPro HSPL1.3 was removed but your wireless always worked even when you had HSPL1.3, am I right?

[Th3Hunter]

ok
firmware file is not eeprom hardware
firmware file is is implemented into windows mobile see "Fw1251r1c.bin"

i have implemented file nvs replacing into eeprom
but does not change the situation!
see swau005a.zip
ok , is there any way of connecting the phone using the RS tool described in the PDF , i saw there a EEPROM Save option and overwrite option, so this means that if a working phone can connect extract and save the eeprom so every other non-working one could overwrite it ? Am i right or too far from the truth ?

[gruptnt]

SLP-1.30.Olipro stated for me : WLAN ERROR

I flashed RUU_Trinity_HTC_WWE_1.23.405.2_103_6275_1.38.00.11 _108_Ship from HTC site, and wlan now works fine, but bootloader still says WLAN ERROR.

Any explanation for this?

i can't access to download htc site (s/n error)
can u share ruu
tnks

[Th3Hunter]

here you are :) http://www.megaupload.com/?d=ZIYMZR2M

[gruptnt]

here you are :) http://www.megaupload.com/?d=ZIYMZR2M

tnks

for my curiosity I reflash eeprom with eeprom Hermes and I launched trindiag
I have no error
I read the MAC address
but when launching the WLAN does not start
then we load the EEPROM is right but is missing something

[zoko]

hello ppl, a can´t run the diagno.nbh when the software try to clear the call timers, tell me not enought time!! and not pass trought this, anyone expires this?

[Th3Hunter]

Hey Do someone know how can i find the start address of the EEPROM and the wi-fi section exactly with it's length , i'm experimenting here with putty and some commands , i would like to make a backup as described here http://forum.xda-developers.com/showthread.php?t=322225
BTW, if you want to do a full backup of you FULL eeprom nand at any time, connect as before and type these commands:

plink HERMES > full.nb (hit ENTER twice)
task 32 (hit ENTER once and only once from now on after every command)
password 0000000000000000
set 1e 1
rbmc me.txt 50000000 7fff800

watch your file grow to 128 MB.

If you ever need to flash the entire eeprom nand, just edit it as above so you take out the commands you typed (HTCS-HTCE) and you're good to go...
i'm wondering if I backup my eeprom nand and then someone else restores it will it work ? or will it work just for men ? any idea ?

[arpcpro]

If you were able to backup the wlan eeprom somehow I think it would work. At least that is what they do on Hermes to get it working. They read the sectors from a working phone and then write them on the phone without wlan.
I don't know any start-end addresses. But someone on the previous post tried to do that and file always came empty. We think its because it is needed a special developer edition hard spl to be able to read the nand sectors of trinity.


Yesterday I found out some info that might worth some detailed investigation. Sorry if this was already checked but I never heard of it.
On a malaysia forum a guy posted that the cause for the wlan problem could be flashing an older radio version from WM6.0 while on WM6.5.
I contacted him about this hoping to get more information and this was his reply:
This problem was a long long time ago, back when i was experimenting HTC Tytn 2's 6.5 roms. When flashing older radios on 6.5 roms it can screw with your connections.

something to do with some dll or something that comes with the radio that is incompatible with certain rom versions. i cant remember cuz it was so long ago. there is a fix for it i think, if u can get back that dll. rilphone.dll i think. again i cant recall.

if u wanna search for info i think back in those days it was called "radio of death" or something.

What you guys think?
Maybe the ROM cookers know more about this than me, but I have the idea that if it was only a *.dll causing the problem, it would be overwritten when flashing a new rom and the problem fixed. But when I searched for that RILPHONE.DLL I found a post of xda that says that "You may wreck your phone by just copying the dll over the existing one".
http://forum.xda-developers.com/showthread.php?t=481026

[SuperSport]

Hey Do someone know how can i find the start address of the EEPROM and the wi-fi section exactly with it's length , i'm experimenting here with putty and some commands , i would like to make a backup as described here http://forum.xda-developers.com/showthread.php?t=322225
i'm wondering if I backup my eeprom nand and then someone else restores it will it work ? or will it work just for men ? any idea ?

If you can get a backup, I'd be the first to offer to flash it. :D

[da_gluck]

If you can get a backup, I'd be the first to offer to flash it. :D

Hi, yesterday i've installed 28014 rom and my WiFi work perfectly, if you explain me how2get eeprom part, which we need, i can read it from my Trinity.

[SuperSport]

Which ROM are you using now? Was your WLAN bad previous to flashing the 28014 ROM and the Flash fixed it?

Thank you for your help!

[Th3Hunter]

Do someone knows how to use plink program ? in my previous post there is an example , but when i try it no matter what name i use i can not connect to my device? It always says something about the hostname ? Any idea, then maybe i can create a backup ...

[arpcpro]

Do someone knows how to use plink program ? in my previous post there is an example , but when i try it no matter what name i use i can not connect to my device? It always says something about the hostname ? Any idea, then maybe i can create a backup ...

Are you able to connect to it with putty? Check my example video:
http://www.fileden.com/files/2009/11/13/2649211/Trinity_eeprom.mp4

If you cannot connect it can be cause sometimes your device will be seen as \\.\WCEUSBSH002 or \\.\WCEUSBSH003, just use which ever it connects to.

[da_gluck]

I had 23003 build before, then just installed 28014 build rom. Before my WLAN was ok, and after flashing it's still ok. I think that trouble was in 23009 or 23016 build, because after flashing this roms WLAN died.

[Th3Hunter]

Are you able to connect to it with putty? Check my example video:
http://www.fileden.com/files/2009/11/13/2649211/Trinity_eeprom.mp4

If you cannot connect it can be cause sometimes your device will be seen as \\.\WCEUSBSH002 or \\.\WCEUSBSH003, just use which ever it connects to.
Thanks a lot arpcpro :) my mistake was that instead of TRIN i wrote Trinity in putty and after that in plink that's why it always said "could not connect to hostname" whatever , i connected it , flashed Olipro's 1.20 tried with it , after that flashed 1.30 and tried with it too, but the result was always the same 285bytes were written every time!
When i opened the created file with a hex editor there was something like this:

See the first picture attached!!!

And something more, in the picture you will see a GetExtRom Data, but we do not have ext rom , are we ?

After that i tried to save the whole info , to make a back-up but without setting the start address and without setting the size! The result was a file 10.1MB big, and unfortunately nothing special inside! Here is a link to it: http://www.megaupload.com/?d=M4T92E1E

Here i attache a second screenshot of the end of that full.nb file viewed in a HexEditor, pay attention to the error!

[arpcpro]

...but the result was always the same 285bytes were written every time!
That is because the final file TRIN.nb contains the commands you executed in plink (the "set 1 1e" etc). On the hermes thread before flashing they have to remove those first commands from the file. But like in my test your file is empty because it only contains the commands.
And something more, in the picture you will see a GetExtRom Data, but we do not have ext rom , are we ?
I think we have. It is an 11mb section where the operator saves the customizations cabs. That is why on an operator branded ROM, after you hard reset, the customizations cabs that are on ExtROM are installed on the first boot. There is a patch here on xda that unlocks that section and it shows it as another drive in windows explorer so that you can read/write. It's usefull to install on that drive a anti theft application.

After that i tried to save the whole info , to make a back-up but without setting the start address and without setting the size!

The best backup I was able to do was with something like "rbmc c:\temp\os.bin OS". I got a 65mb file.
By the way, if you have a working wlan when you have a chance please try with this command "rbmc.exe storage.bin 0x54DC0000 0xB240000" , and upload us the file. I suspect this is the command to download NAND blocks. I would like to try and flash mine with the nand blocks from a working phone, although I don't fully understood yet what is the relation of these blocks with the wlan eeprom.

I got it from posts of this thread but most of them didn't work, and a few people colaborating in this problem had already tried it:
http://forum.xda-developers.com/showpost.php?p=3123900&postcount=19

I think there is nothing unusual on the error of the second pic. I also saw that error when trying random address and sometimes from 00000000 or 0x to FFFFFFFF hoping to backup everything.
Thanks for your testing.

[zoko]

That is because the final file TRIN.nb contains the commands you executed in plink (the "set 1 1e" etc). On the hermes thread before flashing they have to remove those first commands from the file. But like in my test your file is empty because it only contains the commands.

I think we have. It is an 11mb section where the operator saves the customizations cabs. That is why on an operator branded ROM, after you hard reset, the customizations cabs that are on ExtROM are installed on the first boot. There is a patch here on xda that unlocks that section and it shows it as another drive in windows explorer so that you can read/write. It's usefull to install on that drive a anti theft application.


The best backup I was able to do was with something like "rbmc c:\temp\os.bin OS". I got a 65mb file.
By the way, if you have a working wlan when you have a chance please try with this command "rbmc.exe storage.bin 0x54DC0000 0xB240000" , and upload us the file. I suspect this is the command to download NAND blocks. I would like to try and flash mine with the nand blocks from a working phone, although I don't fully understood yet what is the relation of these blocks with the wlan eeprom.

I got it from posts of this thread but most of them didn't work, and a few people colaborating in this problem had already tried it:
http://forum.xda-developers.com/showpost.php?p=3123900&postcount=19

I think there is nothing unusual on the error of the second pic. I also saw that error when trying random address and sometimes from 00000000 or 0x to FFFFFFFF hoping to backup everything.
Thanks for your testing.

i try that from a working device and said´s that:


C:\temp>rbmc.exe storage.bin 0x54DC0000 0xB240000
HTC RBMC reader version 1.1, Jan 5 2009


Dumping rbmc storage.bin 54DC0000 0B240000 to storage.bin...

.................................................. .
WARNING: Dumping to file storage.bin failed!
0x32c8000 bytes read

Read 0x32c8000 bytes in 0d:00h:01m:26s.656ms

HTCSBye!>.L.HTCE

[arpcpro]

ohh :( Can't say I'm surprised, but did the file storage.bin got something and a reasonable size or it has less than 1KB?

[Th3Hunter]

i try that from a working device and said´s that:


C:\temp>rbmc.exe storage.bin 0x54DC0000 0xB240000
HTC RBMC reader version 1.1, Jan 5 2009


Dumping rbmc storage.bin 54DC0000 0B240000 to storage.bin...

.................................................. .
WARNING: Dumping to file storage.bin failed!
0x32c8000 bytes read

Read 0x32c8000 bytes in 0d:00h:01m:26s.656ms

HTCSBye!>.L.HTCE



Same thing happend with me , the result was 51Mb Storage.bin

@arpcpro By the way, if you have a working wlan when you have a chance please try with this command "rbmc.exe storage.bin 0x54DC0000 0xB240000" , and upload us the fileYes mine is working and here is the link to that dump: http://www.megaupload.com/?d=JNXSQCZC

[arpcpro]

Yes mine is working and here is the link to that dump: http://www.megaupload.com/?d=JNXSQCZC
Thanks a lot. I won't have a chance to test it today cause I'm working and have classes at night, but on wednesday evening I'll backup my data and write this file on my trinity with dead wlan.

Can you just tell me which radio version you have installed so that I install the same before flashing? Start-> Settings -> System -> Device information -> Radio version

[Th3Hunter]

...
Can you just tell me which radio version you have installed so that I install the same before flashing? Start-> Settings -> System -> Device information -> Radio version

ROM:6.5.23017 by tomme45i date:27/08/09
Radio: 1.56.70.11

I hope this works ...

[zoko]

how can try this file on a non working device! what commands i have to do to try this?

[Th3Hunter]

Desperate measures:
I need a volunteer to try these files that i've played with.
Using the duttys good nbh tool i decompile and compile again for trinity:
HERMES SPL 2.30, 1.04
HERMES Hard-SPL 1.10
from the hermes wlan thread, that are needed to put our device in that condition that allows reading the EEPROM part!

As you may know there is a considerably BIG RISK of bricking your device!!! SO AT YOUR OWN RISK!!!
GOOD LUCK !!! U R GONNA NEED IT !!!

[arpcpro]

how can try this file on a non working device! what commands i have to do to try this?
This is a risky operation for you, considering that on previous posts you were unable to make a backup of your sectors. You should try to read them again just in case. If you had been able to backup your sectors, then if storage.bin doesn't work, you can always flash it again with the backup you made. If you wanna test it anyway, install the same radio version (v1.56...) and connect to the device with MTTY (\WCEUSBSH001) and hit ENTER to get a CMD prompt
Now type the following:
task 32
password BsaD5SeoA
set 1e 1
lnb c:\temp\storage.bin 0x54DC0000 0xB240000
Hitting ENTER after each command.
When it's done, close MTTY, reboot your device and verify your Wlan.

[SuperSport]

Desperate measures:
I need a volunteer to try these files that i've played with.
Using the duttys good nbh tool i decompile and compile again for trinity:
HERMES SPL 2.30, 1.04
HERMES Hard-SPL 1.10
from the hermes wlan thread, that are needed to put our device in that condition that allows reading the EEPROM part!

As you may know there is a considerably BIG RISK of bricking your device!!! SO AT YOUR OWN RISK!!!
GOOD LUCK !!! U R GONNA NEED IT !!!

This is a risky operation for you, considering that on previous posts you were unable to make a backup of your sectors. You should try to read them again just in case. If you had been able to backup your sectors, then if storage.bin doesn't work, you can always flash it again with the backup you made. If you wanna test it anyway, install the same radio version (v1.56...) and connect to the device with MTTY (\WCEUSBSH001) and hit ENTER to get a CMD prompt
Now type the following:
task 32
password BsaD5SeoA
set 1e 1
lnb c:\temp\storage.bin 0x54DC0000 0xB240000
Hitting ENTER after each command.
When it's done, close MTTY, reboot your device and verify your Wlan.

I'll be trying BOTH of these... :eek: :D Wish Us All Luck!

[SuperSport]

lnb'ing the file to my phone now. It's busy writing away!!! I hope it boots after this, but if not, I'm aware of the risks. Please, nobody try this until I finish mine to verify if it bricks it. I don't want anyone else suffering from a bad lnb if that's the case. I have an ATT Tilt to use if this fails. (Although, I prefer the Trinity. ;))

Write NAND Success!!! Now Rebooting.... :eek:

Edit: ROM is Dead... Flashing my 23504 SUL now to see if it boots. Olipro 1.30 still available and Flashing is working, so not totally a brick! :D More shortly...

Also, for the record, I lnb'd the storage.bin file as is. Was I supposed to edit it in any way?

OK, lnb of storage.bin sent ok. Phone did not boot after. Olipro 1.30 was still there and operational. Olipro said WLAN Error. I re-flashed my ROM and it booted fine. WLAN STILL DEAD. :(

Now going to try the Hard SPL from TheHunter... :D Wish us luck again. :D

[arvissster]

lnb'ing the file to my phone now. It's busy writing away!!! I hope it boots after this, but if not, I'm aware of the risks. Please, nobody try this until I finish mine to verify if it bricks it. I don't want anyone else suffering from a bad lnb if that's the case. I have an ATT Tilt to use if this fails. (Although, I prefer the Trinity. ;))

Write NAND Success!!! Now Rebooting.... :eek:

keep going :)

[arpcpro]

...Also, for the record, I lnb'd the storage.bin file as is. Was I supposed to edit it in any way?[/COLOR]
I took a look at it with an hex editor and I didn't saw any commands at the beginning nor at the end, so it is ok to flash it like it was. Too bad it didn't worked. You can try to put the same ROM and Hard SPL than the original donor trinity, but I don't know if it will change anything.

[Th3Hunter]

Now going to try the Hard SPL from TheHunter... :D Wish us luck again. :D


There is no need to remind you that you must strictly follow the order in the HERMES thread , is it ?

[Th3Hunter]

Now going to try the Hard SPL from TheHunter... :D Wish us luck again. :D


There is no need to remind you that you must strictly follow the order in the HERMES thread , is it ?

[SuperSport]

There is no need to remind you that you must strictly follow the order in the HERMES thread , is it ?

No reminder necessary. Thank you for checking... :) I don't want to cause a problem unknowingly. :o

Still working on it.

Edit: I'm running this: "rbmc" in Putty with no other operators, and it's feverishly outputting Data. Looks like all y's, but I'll know more when it finishes. Is there some reason not to try this? Although, I'm too late. hehe

Ok, after a LOT of y's, this is the end.
ÿÿÿÿÿÿÿÿÿÿNANDFlashReadSectorWithSectorInfo: dwBlockIndex=0x400
NANDFlashReadSectorWithSectorInfo: Address over boundary!!!
rbmc: read data error at 0x8000000

Any other ideas? I'm willing to try about anything.

[SuperSport]

Desperate measures:
I need a volunteer to try these files that i've played with.
Using the duttys good nbh tool i decompile and compile again for trinity:
HERMES SPL 2.30, 1.04
HERMES Hard-SPL 1.10
from the hermes wlan thread, that are needed to put our device in that condition that allows reading the EEPROM part!

As you may know there is a considerably BIG RISK of bricking your device!!! SO AT YOUR OWN RISK!!!
GOOD LUCK !!! U R GONNA NEED IT !!!

I tried flashing these, but they would not go. Still seemed to be in the Hermes format. I also tried to lnb them, but did not work either. I may be doing something wrong though...

[Th3Hunter]

I tried flashing these, but they would not go. Still seemed to be in the Hermes format. I also tried to lnb them, but did not work either. I may be doing something wrong though...

So we are again at the beginning of the end :(

[SuperSport]

So we are again at the beginning of the end :(

Hehehe... That's one way to put it. :p

[gruptnt]

english

who has a trinity with wlan working please contact me with a pm
You must have trinity with wlan working (must see the network)
must have installed olipro 1.30

Thanks


italiano


chi ha un trinity con wlan funzionante perfavore contattarmi con un pm
devi avere trinity con wlan funzionante (deve vedere la rete)
deve aver installato olipro 1.30

Grazie

[SuperSport]

who has a trinity with wlan working please contact me with a pm
You must have trinity with wlan working (must see the network)
must have installed olipro 1.30
Do you think you have something??? :D:D:D

[gruptnt]

Do you think you have something??? :D:D:D

i think yes but I do not want to disappoint anyone

[SuperSport]

i think yes but I do not want to disappoint anyone

Totally understood. Thanks for staying on top of this. ;)

[Th3Hunter]

english

who has a trinity with wlan working please contact me with a pm
You must have trinity with wlan working (must see the network)
must have installed olipro 1.30

Thanks


I Do, and oli 1.30 too

[gruptnt]

ok finaly it's all ok
i have read an eeprom good

so here the solution

load in your trinity olipro1.30

open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)

at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00

save file

now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000

reset
and enjoy

Thank you all for your cooperation
particularly oli for its hard spl

bye and can close this thread with SOLVED !!!

[SuperSport]

ok finaly it's all ok

You are a GOD!!! Thank you so much!!!

It works perfectly, and I just got confirmation from another user that it worked for him too. I don't know how you figured this all out, but great job!

Now we can flash all we want without worry...

[SuperSport]

Now, when I run TrinDiag.nbh, NO errors on info screen.

AND, I can now write my MAC address using TrinDiag. So, I'm guessing it could be changed too. I've read where some people need this function.

[zoko]

Now, when I run TrinDiag.nbh, NO errors on info screen.

AND, I can now write my MAC address using TrinDiag. So, I'm guessing it could be changed too. I've read where some people need this function.

tks to gruptnt, Th3Hunter and supersport and all ppl, who´s contributed to solve this problem!!! i sleep better today!!! hihihihihi

[SuperSport]

tks to gruptnt and supersport and all ppl, who´s contributed to solve this problem!!! i sleep better today!!! hihihihihi

All thanks to gruptnt! I just went along for the ride...

[SuperSport]

WARNING!!! THIS WILL LIKELY HARD RESET YOUR DEVICE, SO PLEASE BACKUP FIRST!

Ok, since gruptnt has done all the hard work, I've decided to do what I could to make it easier for those who still do not understand how to do this.

First thing you need to do is download all of the attachments here to your desktop. Olipro HardSPL 1.30 is here in case you don't already have it installed.

Next, watch the following videos and follow them step by step. These are best if watched in HD and Full Screen.

Lastly, Enjoy your WLAN enabled phone brought to you by gruptnt! :D

Video Tutorials
Step 1:
Extract and Install Files (http://www.youtube.com/watch?v=gjytsCkRbCU)
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/gjytsCkRbCU&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gjytsCkRbCU&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

Step 2:
Edit trin100.nb file using Hxd Hex Editor (http://www.youtube.com/watch?v=TvxswZvzKn4)
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/TvxswZvzKn4&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/TvxswZvzKn4&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

Update - Step 2b: Vista or Windows 7 users ONLY! - XP Users skip to Step 3
I'll update this video tomorrow, but for now, I wanted to give those on the other side of the world access tonight.
This step requires the USBAS Driver attached to this post.
Install XP Driver for Vista or Windows 7 (http://www.youtube.com/watch?v=EOlWC9J5FV8)
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/EOlWC9J5FV8&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/EOlWC9J5FV8&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

Step 3, Last Step:
Send trin100.nb File to your Trinity using MTTY and lnb command (http://www.youtube.com/watch?v=G_LNciyWluU)
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/G_LNciyWluU&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/G_LNciyWluU&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

If you want to watch these Videos in your own language, watch this video that shows how!!! :D
http://www.youtube.com/watch?v=pzvA23xX77w
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/pzvA23xX77w&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/pzvA23xX77w&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

Arabic: إذا كنت بحاجة إلى مشاهدة هذه كليب باللغة الخاصة بك، ومشاهدة هذا الفيديو الذي يظهر كيف!!! : د

Chinese: 要观看这些视频，您自己的语言观看此视频显示如何!!! : D

French: Si vous avez besoin visionner ces vidéos dans votre propre langue, regarder cette vidéo qui montre comment!!! : D

German: Müssen Sie diese Videos in ihrer eigenen Sprache zu beobachten, sehen Sie sich dieses Video, die anzeigt, wie!!! : D

Italian: Se hai bisogno di guardare i video nella tua lingua, guardare il video che mostra come!!! : D

Portuguese: Se você precisar assistir estes vídeos no seu próprio idioma, assista a este vídeo que mostra como!!! : D

Russian: Если вам нужно смотреть эти видео на вашем родном языке, смотреть это видео, которое показывает как!!! : D

Spanish: Si usted necesita ver estos videos en su propio idioma, vea este vídeo que muestra cómo!!! : D

Turkish: Kendi dilinizde bu videoları izlemek gerekirse gösterir bu videoyu izleyin nasıl!!! : D

[arpcpro]

Yuppieeee finally I can use it as VOIP handset again. I'm so happy! :)
I've tested it now and it is working fine. I see the 4 APs in my neighborhood, the web pages load fine and the WLAN keeps draining battery fast like if there was no tomorrow. So it is normal :)

THANK YOU SO MUCH GRUPTNT, I appreciate that a lot and you as well.

An advice for other people using this: I was having a hard time flashing it with putty and mtty 1.42, so I had to use mtty ver1.16.
I didn't know my original MAC address so I used the same as my PC Ethernet card except that I increased one bit (70 to 71) so they are distinct.

[SuperSport]

Thank you arpcpro for your comment on the YouTube Video. I've added a callout on the video explaining.

[gruptnt]

so now we can study the reasons why the wlan dies

[SuperSport]

so now we can study the reasons why the wlan dies

So, I take it you can now dump the entire eeprom? Is there a special SPL for this? It would be nice to be able to make a complete backup of the eeprom for future. Would it backup the BT, WiFi, Serials, IMEI, Mac, etc???

Thanks again.

[sterh]

Thanks everybody for the efford in putting all the little pieces of this puzzle together, and finally finding the solution.

IMHO this thread should be sticky.

[Th3Hunter]

Such a big relief ... THANK YOU SO MUCH first gruptnt and after that to everybody who take part of this and never surrendered :) Once again we proved that if we act together we can do anything! This is The Power Of The XDA Community!

[eisbaer82]

This board is absolutely awesome! Thank you all.

[gruptnt]

So, I take it you can now dump the entire eeprom? Is there a special SPL for this? It would be nice to be able to make a complete backup of the eeprom for future. Would it backup the BT, WiFi, Serials, IMEI, Mac, etc???

Thanks again.

i study this ... but is't so slow and big

I bought a trinity broke, I have got another broken
both are broken lcd (I think short-circuit due to water infiltration)
then I can not see the effects of rom etc etc
I hope to fix them .. least one
one was amended with olipro 1:30 the other is in the original
I made the change from the eeprom and I compared my trinity
Now I want to perfect the eeprom but I have to wait at least one of the trinity to repair broken

[zoko]

can you explain how do you make the dump of epprom? how your process to get the the fix?

[atropo]

Excuse for stupid question but.
where can j find "my mac address".
Ths to all.
Bye

[bigandrea]

ciao gruptnt...puoi spiegarmi in italiano come si ripristina la wlan del mio trinity?
Grazie mille.

[atropo]

ok finaly it's all ok
i have read an eeprom good

so here the solution

load in your trinity olipro1.30

open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)

at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00

save file

now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000

reset
and enjoy

Thank you all for your cooperation
particularly oli for its hard spl

bye and can close this thread with SOLVED !!!

All work fine, what to say, you're a genius.
Ths a million.

[Myxin]

It didn't works to me. The command "lnb trin100.nb 500a0000 40000" returns with a "command error !!!". The modified "trin100.nb" is in the same folder like mtty. "task 32" and the password works fine.

BTW, my battery is very low, I charge it until tomorrow and I will try it again. But I don't think that is my problem...

[nikitto]

Thanks a lot. You're the man. I'm going to give it a try.

Best regards !

[gruptnt]

It didn't works to me. The command "lnb trin100.nb 500a0000 40000" returns with a "command error !!!". The modified "trin100.nb" is in the same folder like mtty. "task 32" and the password works fine.

BTW, my battery is very low, I charge it until tomorrow and I will try it again. But I don't think that is my problem...

first install olipro 1.30 (4 enable lnb command)
second into bootloader
task 32
password
set 1e 1
lnb

bye

[gruptnt]

ciao gruptnt...puoi spiegarmi in italiano come si ripristina la wlan del mio trinity?
Grazie mille.

per prima cose devi installare sul tuo trinity olipro 1.30
devi installarti un programma che ti permetta di fare hex editor del file trin100.nb
apri il file trin100.nb con hex editor
devi moficare :

nell'indirizzo 1b810 e 1b820 sostituisci nel formato ascii HTxxxxxxxxx con il tuo serial number che trovi nella etichetta del palmare sotto la batteria
dopoche' se hai conservato il mac address da qualche parte (in genere nel file log del router con cui ti colleghi in wifi)
oppure se non hai un mac address conservato o lo crei in modo random o meglio ancora
dal tuo pc
start>esegui>cmd
nella finestra dos scrivi il comando ipconfig /all
troverai degli indirizzi (indirizzo fisico) tipo
00-1B-24-13-2E-CF
ovviamente non puoi usare quello del pc xchè andrebbe in conflitto (il mac address è unico x ogni scheda di rete)
quindi assumerai x esempio
00-1B-24-13-2E-BF
a questo punto lo sostituiamo nel file trin100.nb
ricordandoci che va scritto in revers mode (al contrario)
nel file trin100.nb
all'indirizzo 1f850 sostituisci le aa (in formato hex) conil tuo mac address
quindi se hai deciso che il tuo mac è
00-1B-24-13-2E-BF
scriverai
BF2E13241B00
cmq se segui la videoguida di supersport è molto facile eseguire l'operazione
la trovi qui
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

ciao

[Myxin]

first install olipro 1.30 (4 enable lnb command)


Oh sorry !! I found the mistake by myself: I have installed Olipro 1.20 and with this it won't work. You must install OliPro1.30 from supersport's package.

But, by the way, my WiFi is always unusuable. I take the same entries to setup my home Wifi from my HTC Touch Pro and i didn't get a connection with the trin (Touch Pro works fine). I can't see my local Wifi Network and with a manual install there is only "unavailable". Last Radio-ROM for trin is on the device and the WiFi-LED is blinking green.

[FXBS7]

sorry, i have a question. i forgot my mac address and i can't find it in my d810. what should i do?

sorry for my english...

[anaas133]

hi everybody

am new and i get the wlan dead problem

i try to use this solve for this problem
i did everything right but in the final step that when you write
lnb trin100.nb 500a0000 40000
i get command error ?

i am on 6.1
i think the problem with bootscreen
this is a picture of it (in the attachments)

it says

TRIN100
IPL-1.00

TRIN100
SPL-3.20.Olipro

at the bottom
serial

sorry for my english am from arab gulf

[gruptnt]

hi everybody

am new and i get the wlan dead problem

i try to use this solve for this problem
i did everything right but in the final step that when you wriet
lnb trin100.nb 500a0000 40000
i get command error ?

i am on 6.1
i think the problem with bootscreen
this is a picture of it (in the attachments)

it says

TRIN100
IPL-1.00

TRIN100
SPL-3.20.Olipro

at the bottom
serial

u must have olipro 1.30

[anaas133]

thank you a i did it

tank you very much

i own you one

[eisbaer82]

sorry, i have a question. i forgot my mac address and i can't find it in my d810. what should i do?

sorry for my english...

I lost my too.

I've generated a random one. All MAC Addresses starts with the vendor id. For HTC this should be 00-09-2D. The other 3 bytes are the device id. Simply take random hex numbers. Remember to reverse it. So you have to enter xx xx xx 2D 09 00 as MAC to the trin100.nb. xx xx xx are the random hex numbers like a2 b6 d1.

[FXBS7]

I lost my too.

I've generated a random one. All MAC Addresses starts with the vendor id. For HTC this should be 00-09-2D. The other 3 bytes are the device id. Simply take random hex numbers. Remember to reverse it. So you have to enter xx xx xx 2D 09 00 as MAC to the trin100.nb. xx xx xx are the random hex numbers like a2 b6 d1.

ok, thanks for reply. now i'm one step closer to fix my wlan.

EDIT:
it really work!!! my wlan now can on. i don't it can connect or not but at least it can on!!!

big thanks to gruptnt. and SuperSport for the tutorial.

[gruptnt]

ok, thanks for reply. now i'm one step closer to fix my wlan.

EDIT:
it really work!!! my wlan now can on. i don't it can connect or not but at least it can on!!!

big thanks to gruptnt. and SuperSport for the tutorial.

ok
if is not problem of rom
i think your hardware is different
i have read eeprom from an htc_045 (chip wlan is wl1251b)

u can post an task 37 ff log putty

[bigandrea]

ciao gruptnt non riesco ad installare hard spl 1.30 perche mi genera sempre questo errore:ERROR [286]:UPDATE ERROR.Come posso fare?Grazie.

[drummer10630]

Glad you guys got this Trinity Wlan problem sorted out. Sorry I was not able to contribute as I don't own a Trinity device. Hope my Hermes method was useful, even if an older thread...cheers

[SuperSport]

Glad you guys got this Trinity Wlan problem sorted out. Sorry I was not able to contribute as I don't own a Trinity device. Hope my Hermes method was useful, even if an older thread...cheers

I can say it was helpful. It was nice to know how you did it so that we had a jumping off point to go from. Thank you Drummer10630. :D

[SuperSport]

ciao gruptnt non riesco ad installare hard spl 1.30 perche mi genera sempre questo errore:ERROR [286]:UPDATE ERROR.Come posso fare?Grazie.

@ bigandrea, You have an HTC P3600i. Not sure if it's the same procedure. Gruptnt may be able to help.

@ gruptnt, I've confirmed 3.20 is the HardSPL for the P3600i. Do you know if it's possible to use this procedure for his phone?

Bing Translation:
@ bigandrea, hai un P3600i di HTC. Non certo se è la stessa procedura. Gruptnt può essere in grado di aiutare.

@ gruptnt, io ho confermato 3,20 è il HardSPL per la P3600i. Lei sa se è possibile utilizzare questa procedura per il suo telefono?

[binht611]

ok finaly it's all ok
i have read an eeprom good

so here the solution

load in your trinity olipro1.30

open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)

at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00

save file

now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000

reset
and enjoy

Thank you all for your cooperation
particularly oli for its hard spl

bye and can close this thread with SOLVED !!!

everything ok!!!. Thanks for the solution.
My wifi work great again :D:D:D
(wifi of trinity is perfect, its very strong and fast !!!!)

[FXBS7]

ok
if is not problem of rom
i think your hardware is different
i have read eeprom from an htc_045 (chip wlan is wl1251b)

u can post an task 37 ff log putty

i tested and my wlan can connect.:D

sorry, i types less in my last post:o what i want to say is i don't know it can connect or not coz at my place i don't have wifi.

once again thanks you gruptnt, i owe you one.

[bigandrea]

Il mio è un htc p3600.Ieri ho riprovato tante volte finche sono riuscito ad installare l'olipro 1.30 e ripristinato la wifi.Cmq grazie a tutti.

[shreef]

everything ok!!!. Thanks for the solution.
My wifi work great again :D:D:D
(wifi of trinity is perfect, its very strong and fast !!!!)

i did all the steps , and i still have dead wifi , not turned on .
but i noticed after this method when i run info 8 command that there is a bad block , the last one wich is "773" any help plz........

[shreef]

i did all the steps , and i still have dead wifi , not turned on .
but i noticed after this method when i run info 8 command that there is a bad block , the last one wich is "773" any help plz........

[gruptnt]

excuse me guys
but I can work only weekends
I would like to know from you who could not run the WLAN after replacing eeprom .

for p3600i
wait

for those errors by installing olipro 1.30
can use the attached exploid
enter into bootloader , disable activesync connect
launch after your trinity reboot automatically returns into bootloader
now lauch olipro1.30
after is ok

please who has the wlan running after the procedure
help others by writing a tutorial in their own language

I'm also trying to improve eeprom because i have used hermes as base
and i study 4 gsm error

Thanks to all

[Bine]

Hello everybody,

I would like to thanks and congratulate everyone who works in this thread.

You are the best. :rolleyes:

Special thanks to gruptnt and SuperSports.

[SuperSport]

Hello everybody,

I would like to thanks and congratulate everyone who works in this thread.

You are the best. :rolleyes:

Special thanks to gruptnt and SuperSports.

Thank you very much, but remember, gruptnt did all the hard work. I'm sure he spent countless hours going over the nb files until he found what he needed to get this working.

[krzysztofsobaszkiewicz]

super:):)

I tested and my wlan connect :D




Polski:


Dziala.nie ma problemu zadnego.

[Fr33man_]

Hi gruptnt,

how do you extract the good eeprom?
Can you wrote a how2 down?

greetz
Fr33man

ok finaly it's all ok
i have read an eeprom good

so here the solution

load in your trinity olipro1.30

...

[nemanja1392]

when i open mtty , he doesnt show item (htc usb) in box with ports ...

i am running Windows 7 in mobile center i deactivated activesync usb

1.30 olipro ... on my phone it shows USB and on my pc HTC USB SYNC

help please??:D

[Fr33man_]

at my win7 64bit i have the same Problem..

i "fixed" it by using the "Windows XP Mode" or using VMWare/VirtualBox with WinXP installed

i don´t know if other workarounds for 7 exists.. i don´t searched for it

sry,.. native language is german ;)

[nemanja1392]

that method doesnt work for me ...

[gushinam]

First of all I would like to congratulate everyone who worked in this thread and all Trinity owners who have at least chance to not affraid to have problem with wifi after flashing different ROMs. Owners, you can always refer to this thread and find a solution.

But I have a question to gruptnt and SuperSport.
Guys, how have you managed to read good eeprom?
How have you managed to create .nb file?You answer will be much apreciated.

[kabtv]

when i open mtty , he doesnt show item (htc usb) in box with ports ...

i am running Windows 7 in mobile center i deactivated activesync usb

1.30 olipro ... on my phone it shows USB and on my pc HTC USB SYNC

help please??:D

same problem here, tried it on vista and windows 7 :mad:

anyone knows about it..?

[SuperSport]

First of all I would like to congratulate everyone who worked in this thread and all Trinity owners who have at least chance to not affraid to have problem with wifi after flashing different ROMs. Owners, you can always refer to this thread and find a solution.

But I have a question to gruptnt and SuperSport.
Guys, how have you managed to read good eeprom?
How have you managed to create .nb file?You answer will be much apreciated.gruptnt was the one who figured this out. I believe he was able to create a new HardSPL using the Hermes HardSPL and modifying parts to work with the Trinity. I'm not sure exactly what parts, but I know he spent a long time searching it down.

same problem here, tried it on vista and windows 7 :mad:
anyone knows about it..?Guys, as far as I know, Vista & Windows 7 will not work. I tried it a few times and finally went to XP Mode in Windows 7 Ultimate or a Virtual Machine in Vista. Just be sure you install ActiveSync in your Virtual XP machine and then disable the USB there. Also, when you start your XP mode and connect your phone, you will need to tell XP Mode to use the USB port of your phone. That will take the focus from Windows 7 and give it to XP Mode. Both cannot use the port at the same time. It's in the menus at the top of XP Mode, or in VMWare. On mine, it was called 'Unidentified Device'.

If you are on Vista, you can use VMWare (http://www.vmware.com/products/workstation/) or Windows Virtual PC (http://www.microsoft.com/windows/virtual-pc/default.aspx). You will need a copy of XP to install on the Virtual PC.

[SuperSport]

OK, I just did a workaround for Windows 7 & Vista. I just tried it and it works! So, in the morning, I will try to have a Video Tutorial and Attachments to get it going for you. Just so you know, it's now 10pm, so it will be a little while, but watch for it tomorrow. I would stay up till 3am like I normally do, but I had a long weekend, and need some rest.

Please be patient, those of you with Vista or Windows 7 will be good. :D

[SuperSport]

Video Tutorials now Updated with XP Driver Hack to get MTTY working in Windows Vista or Windows 7. :D

http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

After completing Step 3, remember to replace Driver with Windows Vista or Windows 7 driver. Instructions at end of Video 2b.

I MAY clean this up tomorrow if I feel up to it, but for now, I wanted to be sure those of you on the other side of the world had access to it before I woke up again. ;)

Good Luck, and let me know if I've missed something, or it does not work.

[rocky_ofk]

per prima cose devi installare sul tuo trinity olipro 1.30
devi installarti un programma che ti permetta di fare hex editor del file trin100.nb
apri il file trin100.nb con hex editor
devi moficare :

nell'indirizzo 1b810 e 1b820 sostituisci nel formato ascii HTxxxxxxxxx con il tuo serial number che trovi nella etichetta del palmare sotto la batteria
dopoche' se hai conservato il mac address da qualche parte (in genere nel file log del router con cui ti colleghi in wifi)
oppure se non hai un mac address conservato o lo crei in modo random o meglio ancora
dal tuo pc
start>esegui>cmd
nella finestra dos scrivi il comando ipconfig /all
troverai degli indirizzi (indirizzo fisico) tipo
00-1B-24-13-2E-CF
ovviamente non puoi usare quello del pc xchè andrebbe in conflitto (il mac address è unico x ogni scheda di rete)
quindi assumerai x esempio
00-1B-24-13-2E-BF
a questo punto lo sostituiamo nel file trin100.nb
ricordandoci che va scritto in revers mode (al contrario)
nel file trin100.nb
all'indirizzo 1f850 sostituisci le aa (in formato hex) conil tuo mac address
quindi se hai deciso che il tuo mac è
00-1B-24-13-2E-BF
scriverai
BF2E13241B00
cmq se segui la videoguida di supersport è molto facile eseguire l'operazione
la trovi qui
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

ciao

yessssss yesssss yesssss

wlan work work work

great job

ty....you are the king

[Fr33man_]

Hey guy´s,

can anyone explain me, how to extract/read out the wlan-eeprom, please?

greetz fr33man

[mtsales]

I have a similar problem with a touch diamond. Anyone knows of a similar solution? If not, anyone can help in getting a similar solution ready for the touch diamond?

Cheers

[gruptnt]

I have a similar problem with a touch diamond. Anyone knows of a similar solution? If not, anyone can help in getting a similar solution ready for the touch diamond?

Cheers

i have post an possible solution 4 diamond100
here
http://forum.xda-developers.com/showthread.php?t=597195

[mac_es]

i have post an possible solution 4 diamond100
here
http://forum.xda-developers.com/showthread.php?t=597195

Could you explain how to read the eeprom?

I'm on an HD now, and some people have this issue (the same wlan chipset as trinity) http://forum.xda-developers.com/showthread.php?t=542426

I would like to backup my eeprom to not suffer this stuff.

Thanks!

[mtsales]

Thanks gruptnt. Will give it a try.

I investigated a bit more this and it seems I can activate the wifi (the cursor in comm manager turns green) and I can see the wifi icon in top bar.
But my diamond cannot find any wifi networks although I have my router broadcasting the ssid and the signal is strong enough.

Can this also be related to the eprom stuff?

Thanks

[pinamosaki]

This work for htc diamond?

ok finaly it's all ok
i have read an eeprom good

so here the solution

load in your trinity olipro1.30

open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)

at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00

save file

now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000

reset
and enjoy

Thank you all for your cooperation
particularly oli for its hard spl

bye and can close this thread with SOLVED !!!

[gruptnt]

first up for search

[vladvlad000]

HI, i have HP iPaq RW 6815, and I have some problem with WLAN, after series of ROM updates. Can anybody tell me solution (i have use search, many solutions, but WLAN still not working). Already great thanks!

[davidmore]

Many thanks to gruptnt , SuperSport and all people that have solved this problem.

I have find it very useful

David:)

[SuperSport]

Learn how to watch the YouTube Video Tutorials using your own language with Captions.
http://www.youtube.com/watch?v=pzvA23xX77w

http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345

[cyberbrain425]

Now the same problem happens to my KAISER. Is there any possibility of solving it like the Hermes and Trinity? I miss my Wifi :(

[gruptnt]

Now the same problem happens to my KAISER. Is there any possibility of solving it like the Hermes and Trinity? I miss my Wifi :(

i have kaiser tell me what's the problem?

[SuperSport]

I have the ATT Tilt, and would be willing to experiment if necessary. Just let me know gruptnt. ;)

[cyberbrain425]

i have kaiser tell me what's the problem?
Some days ago when I turned on WLAN, the phone stopped responding. I reset the phone and it hangs at the splash screen. I flashed the stock ROM and WM ran fine. However I can't turn on WLAN afterwards. I tried to turn it on but it just stayed at "OFF". The problem is exactly the same as described here with the Hermes and Trinity.

[gruptnt]

Some days ago when I turned on WLAN, the phone stopped responding. I reset the phone and it hangs at the splash screen. I flashed the stock ROM and WM ran fine. However I can't turn on WLAN afterwards. I tried to turn it on but it just stayed at "OFF". The problem is exactly the same as described here with the Hermes and Trinity.

ok
if u read all post
i can use putty for launch
into bootloader (i have spl-1.0.olipof)
first control if u have an bad memory with command info 8
if all ok with
command task 37 ff
u can control into log if

WIFI : ENABLE
.
.
IOCTL_FMD_NAND_READ_WLAN_DATA
06/04/2010 00:41:39 Write WLAN Data
06/04/2010 00:41:39 ++HTC_OEM_ReadNand
06/04/2010 00:41:39 --HTC_OEM_ReadNand
[W00:00:10:787]WLANMSG: EEPROM signature=0xee1251, length=661
[W00:00:10:792]WLANMSG: EEPROM ver=6.3.2
.
.
[W00:00:11:739]WLANMSG: FW Version = Rev 6.0.4.40 Station Id=XX-XX-XX-XX-XX-XX
.


this is first step

[cyberbrain425]

This is what "task 37" gave me: there's no StationID as you mentioned

[CommManager] OnWLANButton +
[CommManager] OnWLANButton ; bStatus = 1
[CommManager] Wizard_SetCardInCardOut +, bCardInOut = 1
[CommManager] GetWLANInOutStatus +
[CommManager] GetWLANInOutStatus : KernelIoControl = IOCTL_HAL_WLAN_MODULE_GET return FALSE;
[CommManager] GetWLANInOutStatus -
[CommManager] HTC_ChangeRadioState +
[CommManager] HTC_ChangeRadioState : pTD->DeviceType = 3, pTD->pszDeviceName = Bluetooth
[CommManager] HTC_ChangeRadioState : pTD->DeviceType = 2, pTD->pszDeviceName = Phone
[CommManager] HTC_ChangeRadioState -
[CommManager] Wizard_SetCardInCardOut -
[CommManager] OnWLANButton -

[gruptnt]

This is what "task 37" gave me: there's no StationID as you mentioned

[CommManager] OnWLANButton +
[CommManager] OnWLANButton ; bStatus = 1
[CommManager] Wizard_SetCardInCardOut +, bCardInOut = 1
[CommManager] GetWLANInOutStatus +
[CommManager] GetWLANInOutStatus : KernelIoControl = IOCTL_HAL_WLAN_MODULE_GET return FALSE;
[CommManager] GetWLANInOutStatus -
[CommManager] HTC_ChangeRadioState +
[CommManager] HTC_ChangeRadioState : pTD->DeviceType = 3, pTD->pszDeviceName = Bluetooth
[CommManager] HTC_ChangeRadioState : pTD->DeviceType = 2, pTD->pszDeviceName = Phone
[CommManager] HTC_ChangeRadioState -
[CommManager] Wizard_SetCardInCardOut -
[CommManager] OnWLANButton -

can you send me in private putty.log

[moszkito]

I had the same problem: my WLAN wasn't turned on.

THANK YOU GUYS SO MUCH!!!! Thanks for the video tutorial as well, it was very helpfull! My wifi is working again! :D :D :D

[parsek]

can you send me in private putty.log

Hi gruptnt,

I have the same (as cyberbrain425) problem with Kaiser-wifi
and saw already for HERMES a wifi-problem-howto marked as solved.
But i didn't found (yet) such how-to for Kaiser.
Was it successful (to repair) with Kaiser's wlan?

Thanks in advance.

[visvaram]

Hi gruptnt,

I have the same (as cyberbrain425) problem with Kaiser-wifi
and saw already for HERMES a wifi-problem-howto marked as solved.
But i didn't found (yet) such how-to for Kaiser.
Was it successful (to repair) with Kaiser's wlan?

Thanks in advance.
I get command error on lnb trin100.nb 500a0000 40000

solution pls

[visvaram]

lnb trin100.nb 500a0000 40000

getting command error on this

solution pls

[SuperSport]

lnb trin100.nb 500a0000 40000

getting command error on this

solution pls

Are you using the Trinity? P3600?

Did you follow the videos exactly? Did you make sure you turned off Activesync before lnb? Are you in Windows XP or Vista, 7?

[visvaram]

I use windows Xp and i did everythng according to the youtube everything gone correct until the last step .....when i press return key after typing
lnb trin100.nb 500a0000 40000
iam getting command error....
i turned off activesync as said in the video
pls help ..

[SuperSport]

I use windows Xp and i did everythng according to the youtube everything gone correct until the last step .....when i press return key after typing
lnb trin100.nb 500a0000 40000
iam getting command error....
i turned off activesync as said in the video
pls help ..

Do you have HardSPL Olipro 1.30 installed?

EDIT: Is the newly edited trin100.nb file in the same directory as the MTTY program?

[visvaram]

ya the edited file is in the same folder and i hav flashed olipro ..but i hav TRIN 1.07 .ds and ipl sspl by des in bootloader mode

[visvaram]

Cmd>task 32
Level = 0

Cmd>password BsaD5SeoA
Pass.

HTCST ÚÈÒHTCEPassWord: BsaD5SeoA


Cmd>lnb trin100.nb 500a0000 40000
Command error !!!

Cmd>

this is the reply iam getiing

pls help to resolve my issue

[visvaram]

Cmd>task 32
Level = 0

Cmd>password BsaD5SeoA
Pass.

HTCST ÚÈÒHTCEPassWord: BsaD5SeoA


Cmd>lnb trin100.nb 500a0000 40000
Command error !!!

Cmd>

this is the reply iam getiing

pls help to resolve my issue
]


iam trying to flash the hard spl olipro 1.2 but cant
everytine iam getting it done till congratualtions screen but cant see the version of olipro in bootloader screen

[visvaram]

I checked and flashed olipro 1.2
it was olipro 1.2 in bootloader
Mmty works fine
the only problem is
command error on sending trin100.nb file to trinity
os is xp
everything goes good except tranferiing file

pls help needed

[davidmore]

I checked and flashed olipro 1.2
it was olipro 1.2 in bootloader
Mmty works fine
the only problem is
command error on sending trin100.nb file to trinity
os is xp
everything goes good except tranferiing file

pls help needed

NO, NO , NO !!!:p:p

You must before install HardSPL Olipro 1.30 on your device.
(lnb command is implementated only in this version).

Then , remeber to use MTTy version 1.16 (1.42 version or other versions don't works).

Follow the good "Supersport" Tutorial

David :)

[arpcpro]

..........

[visvaram]

Oh ok
the thing is i cant flash 1.3
evertime i try to flash 1.3 olipro iam geting till the last step of congratulation ...ut the rom is still in 1.07des
any hint to forceflash 1.3 olipro
tried forums but no one seem t hav my problem
pls help

[SuperSport]

Oh ok
the thing is i cant flash 1.3
evertime i try to flash 1.3 olipro iam geting till the last step of congratulation ...ut the rom is still in 1.07des
any hint to forceflash 1.3 olipro
tried forums but no one seem t hav my problem
pls help

Have you tried running sspl-trin.exe on the phone before flashing? Or using sspl-trin.exe and flashing using SD Method?

If you have a 2 GB or smaller SD Card (NON-SDHC), make sure it is formatted as Fat32. Then copy the two files from this attachement to the Root of your SD Card (Unzip first then copy sspl-trin.exe and trinimg.nbh).

With your phone running, go to the file manager on your phone and browse to the sspl-trin.exe file on your SD Card. tap it to run it and accept any question it MIGHT ask. Doesn't always ask. This should throw your phone into a special bootloader mode that will allow Olipro 1.30 to install. Follow the instructions to finish the flash and report back if you still have trouble, or success. ;) After flashing, delete the two files from your SD Card, or at least move them to a subfolder so it does not flash again when you enter bootloader mode. Any NBH file called trinimg.nbh left in the root of SD Card will try to flash when entering bootloader.

[visvaram]

Thank u verymuch ..but byt this method iam getting into botloader mde after cicking sspl-trin.exe then nothing happens
wat to do now

[visvaram]

tried many times with only those files on sd card ...but still iam gettign into bootloader but nothing turns after tth wat i hav to do now.my sd card is in fat 32 format
any correction i hav to do now

[SuperSport]

tried many times with only those files on sd card ...but still iam gettign into bootloader but nothing turns after tth wat i hav to do now.my sd card is in fat 32 format
any correction i hav to do now

Do you know the size of your SD Card? If it's 4MB or larger, then it's possibly SDHC which will prevent SD Flashing from working.

You can run the SSPL-trin.exe from your phone to place you into bootloader mode, then flash from USB Cable as before. Once you are in the special bootloader mode, it should allow Olipro 1.30 to install.

Guys if I'm missing something here, please chime in. I'd hate to be leading visvaram down the wrong path...

PS: I'm in the reply window, so I cannot look back far enough, but I wanted to verify if you are for sure on a P3600, and NOT a P3600i?

PSS: I just created an AutoFlash file of my working Olipro 1.30. Run your sspl-trin.exe on your phone, then connect to usb. Be sure your phone shows USB in the white box on the Bootloader screen. Then run this attachment. It will extract and flash Olipro 1.30. Just follow the directions.

Download AutoFlash Olipro 1.30 (http://www.mediafire.com/?6xwbny57wmaj0di)

[visvaram]

Many thanks supersoft ...i did as u said ...placed My phone(p3600) in bootloader mode by clicking sspl-trin.exe placed in my 2gb sd card ....i installed the file u gave me ...weird thing is again iam in the same 1.07 des bootloader ...iam confused

[SuperSport]

That's really strange. That process should work to install HardSPL 1.30.

Copy both files to root of SD Card (sspl-trin.exe and trinimg.nbh).
Insert SD Card into phone.
On phone, browse to sspl-trin.exe and run it.
Bootloader will show for a second, then find Olipro 1.30 and ask to install it Grey Screen with blue lettering, seen below.
Press Power when asked.
Phone should reboot into bootloader and install Olipro.

That should be it. Anybody see me missing something? I'm a little tired, so I might be.

I'm sorry you are having this trouble. I want to get it going for you... :o

[visvaram]

Many thanks ....tried formattign again and copied 2 files to card and it started flashing ...i was happy ..but when i try to enter into bootloader again it again shows Trin 1.07 des....iam sorry to trouble again

[visvaram]

Hi supersoft,
Somehow flashed olipro sucesfully and transferrred file trin100 in mmty
but the problem persists
when iam in bootloader mode it gives an message in white box WLAN ERROR
is it due to hardware or some software issue

[arpcpro]

I suppose you changed the serial number in trin100.nb like in the video tutorial, right?
In somes cases the wlan error message keeps appearing in the boot loader, but after flashing the WLAN works fine when in the operating system. Did you tested it?

[visvaram]

I suppose you changed the serial number in trin100.nb like in the video tutorial, right?
In somes cases the wlan error message keeps appearing in the boot loader, but after flashing the WLAN works fine when in the operating system. Did you tested it?

did it exactly but stil the wlan didnt work even inside os ...still the same problem on clicking the wlan switch in comm manager

[SuperSport]

I suppose you changed the serial number in trin100.nb like in the video tutorial, right?
In somes cases the wlan error message keeps appearing in the boot loader, but after flashing the WLAN works fine when in the operating system. Did you tested it?I was going to mention that. Even my phone shows WLAN not working at times, but it does work inside OS.
did it exactly but stil the wlan didnt work even inside os ...still the same problem on clicking the wlan switch in comm managerThat's strange, because normally, when the WLAN is not working, you cannot even find the Wi-Fi icon inside "Settings/Connections". Do you see Wi-Fi in there? When you tap it, does it go to the 'Search for Networks' page? If it does, I'm wondering if you are having trouble with your Wi-Fi network instead.

[visvaram]

Man u made my phone working ...i re edited the trin100 file again in hex and flashed it to my phone
and tried everything worked
iam happy
many thanks
many thanks

[SuperSport]

Man u made my phone working ...i re edited the trin100 file again in hex and flashed it to my phone
and tried everything worked
iam happy
many thanks
many thanksThat's GREAT news! I guess one digit was off or something...

Edit: Oops, sorry... PS: Gruptnt is is the GOD. He made all this possible along with other's help. Without their work, we would still be without WLAN. I just made it easier for newbies to understand.

[Arnofl]

Hi. Thank's a lot for the solution. Just had some problem with windows seven. but now Wlan is working great.:)

[pilot40]

Hi supersoft,
Somehow flashed olipro sucesfully and transferrred file trin100 in mmty
but the problem persists
when iam in bootloader mode it gives an message in white box WLAN ERROR
is it due to hardware or some software issue

Like you I did everything that was written and I got half way 2.., then as i googled 4 "htc p3600 MAC " I ran into "omgili.com" !! I red something that hit me like a brick :eek::eek: "But file nb is blank On trinity 100.....Thnks 4 all help konst_kk 24th September 2009".........I tried to install the trin100.nb -AS IS- and got error about sync....SO i put my trinity serial No....and WiFi IS BACK !!!!!!!!:D:D

[disaster2009]

My wifi is now working great work people,thanks supersport my wifi is now working, you are great ;)

[ped_kho]

I have the same problem with WIFI on my HD2, can anybody help me with that ?!

[9nightz]

hello! i want some question.... my phone is htc hd2 so i can do with use soft of trin??? sorry for my english

[arpcpro]

hello! i want some question.... my phone is htc hd2 so i can do with use soft of trin??? sorry for my english

You might be able to use putty or mtty to connect to HD2, but you cannot use the same *.nb file we use on trinity to fix the wlan problem. The NB file is part of the wifi card eeprom and HD2 uses a different wifi module.

[9nightz]

You might be able to use putty or mtty to connect to HD2, but you cannot use the same *.nb file we use on trinity to fix the wlan problem. The NB file is part of the wifi card eeprom and HD2 uses a different wifi module.

Thank you!
But i cant find .nb file in htc hd2! i try google seach!
you can help me!
give me nb file of hd2, thank you verry much :'(

[sincap]

ok finaly it's all ok
i have read an eeprom good

so here the solution

load in your trinity olipro1.30

open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)

at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00

save file

now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000

reset
and enjoy

Thank you all for your cooperation
particularly oli for its hard spl

bye and can close this thread with SOLVED !!!

First of all I appreciate SuperSport's patiance and gruptnt's hardwork with his knowledge.

I had same problem with my trinity wifi due ROM upgrade. When I lost my WiFi I was upset but didn't care too much , While searching xda, I found this topic and I have read all pages of this topic. I really wondered how would be the situation of wifi problem.

SuperSport I really appreciate your way of finding problem symptoms, solutions and especially your patience.

I would like to thank again SuperSport , gruptnt

[SuperSport]

Thank you sincap for the kind words. I'm very happy this worked for you. While I do have a strong desire to figure out problems , resolve them, and share the fix with others, I really want to be sure to give the thanks to gruptnt. He did the research and coding necessary to make this work. Again, thank you for the kind words.

[DforDesign]

Hello, I have problem with eeprom with my hd2, anyone could give me some advice or solution? I've tried SuperSport's solution, but it fails in some way on hd2:/

Please guys help me out with it.

Thank you in advance.

BTW, I have this problem since I applied new rom. What could be the cause of this problem?

[arpcpro]

@ DforDesign (http://forum.xda-developers.com/member.php?u=4155703) have you already tried to revert to the official HD2 ROM to confirm that the wifi problem remains?

The eeprom files from this post (for P3600) won't work for a different device with completely different wlan chip.

[plumax]

Hi.. i have done it:


load in your trinity olipro1.30

open trin100.nb with an hex editor
at 1b810 and 1b820 replace htxxxx.. with your s/n (htxxyyxxxxx)

at 1f850 replace aa with your mac address remember is on revers (real mac : 00-01-02-03-04-05-06 write on 6d 54 06 05 04 03 02 01 00

save file

now into bootloader
task 32
password BsaD5SeoA
lnb trin100.nb 500a0000 40000

but at the end heva wrote : command error.. anyone can help me?

[arpcpro]

@plumax Are you using putty? If so try to use the other oldest B7666_mtty1.42.exe app. Putty didn't work for me on XP.