Trinity with black screen

[saopacic]

Hi everyone,

I got trinity which does only black screen with backlight. Dont know how it got in this state. It was on Orange.

The ActivSync seems to attempt to connect but failes. The unbrick.bat gives following result


Please make sure ActiveSync USB connection is DISABLED
Press any key to continue . . .

=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL

[] SPL file: TRIN_HardSPL.nb

[] Detecting IPL & SPL versions...
* Detected Trinity IPL-USPL
* Unknown SPL - checksum: 0x34c4015a
* NOTE: if exploit doesn't work try with -c 1 and -c 2

[] Detecting memory layout...
* Finding CRC...
* We need to fill the stack until address 0x8c03115c

[] Detecting stack layout...
* Send === pattern
* Found pattern === crc=0x98ea7ae2 at address 0x8c08db90 with offset 0x0
* Switch to ruustart command mode...
* Send ~~~ pattern
* Found pattern ~~~ crc=0x91aefc33 at address 0x8c08da40
* Send *** pattern
* Found pattern *** crc=0x709a5411 at address 0x8c08d960

[] Loading unsigned code... (wdata buffer at 0x80b00000)

[] We need to overflow 0x5c709 bytes on the stack...
* Sent 0x4d8c0 bytes - stack overflow reached the SPL end at 0x8c040000
* Sent shellcode - we will jump here later
* We need to send 271 ruustart calls more, containing relative jumps to our s
hellcode
* Sent 0x5c6c0 bytes

[] We need to call a properly aligned function above patch limit now
* Calling emapi ds...

[] Done, Trinity 0wn3d!!!
* If device is not responding, soft reset and try again!

Press any key to continue . . .



I can change the OS after but still - black screen. The screen is OK as I have tried it on another trinity that works.

Any ideas what shell I try next.

[saopacic]

If I use TRIN_SPL105.nb instead of HardSPl and dont softreset after but run unbrick again it shows TRIN_SPL105 untill rebooted

Is it realy a brick now?


SPL file: TRIN_SPL105.nb

[] Detecting IPL & SPL versions...
* Detected Trinity IPL-0.50
* Unknown SPL - checksum: 0x57202532
* NOTE: if exploit doesn't work try with -c 1 and -c 2

[] Detecting memory layout...
* Finding CRC...
* We need to fill the stack until address 0x8c0328a0


then this


Please make sure ActiveSync USB connection is DISABLED
Press any key to continue . . .

=== Trinity splxploit by pof - pof[at]eslack[.]org
=== Exploits stack overflow on HTC Trinity SPL

[] SPL file: TRIN_SPL105.nb

[] Detecting IPL & SPL versions...
* Detected Trinity IPL-USPL
* Detected Trinity SPL 1.05.1000

[] Detecting memory layout...
* Finding CRC...
* We need to fill the stack until address 0x8c0328a0

[] Detecting stack layout...
* Send === pattern
* Found pattern === crc=0x98ea7ae2 at address 0x8c08db94 with offset 0x4
* Switch to ruustart command mode...
* Send ~~~ pattern
* Found pattern ~~~ crc=0x91aefc33 at address 0x8c08da44
* Send *** pattern
* Found pattern *** crc=0x709a5411 at address 0x8c08d964

[] Loading unsigned code... (wdata buffer at 0x80b00000)

[nazbel]

hi!! i used to have the same problem...i think you should try this way.....
http://forum.xda-developers.com/showthread.php?t=473517
i hope it will work for you...
good luck!

[corfou]

Install radio and you will recover your screen

[broadband]

i got the same problem ,,, and if i twist it ,it works ,,then i leaveit ,, it hangs
can we find a solution