Manila 3D .cab...Help please !!

[vicky_crispy]

Hello Seniors,

I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me.:confused: I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated. :)
I found one working .cab file for Manila 2d but it doesn't work in landscape mode. :(

[fiyaburnz]

http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search:cool:

[kaiserII101]

looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.

[vicky_crispy]

Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!

[kaiserII101]

Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29

[vicky_crispy]

Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers :) :D :cool:

[denco7]

Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers :) :D :cool:

Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.

[vicky_crispy]

Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ? :D

[vicky_crispy]

Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29

Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too :D

[vicky_crispy]

:cool:http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search:cool:


Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers :) :D

[kaiserII101]

Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too :D

by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better

[vicky_crispy]

by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better

Sir,

thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened :( Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance :)

[stylez]

Flashing Your First Kaiser Rom (For Noobs) (http://forum.xda-developers.com/showthread.php?t=433835)

[kaiserII101]

click the link stylez posted, don't be embarrassed, I was there about 6 months ago :rolleyes:

[fiyaburnz]

:cool:


Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers :) :D
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d

[byron0318]

installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin :) i dont have any problem w/ it right now

[kaiserII101]

yeah but buddy here is the thing. The skin pales compared to the actual thing ;). And you probably didn't flash -G-'s ROM I bet?

[vicky_crispy]

yeah but buddy here is the thing. The skin pales compared to the actual thing ;). And you probably didn't flash -G-'s ROM I bet?

Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !! :D

Regards,

Vicky :)

[kaiserII101]

Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme

[vicky_crispy]

Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme

Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job :cool:

[denco7]

Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job :cool:

Welcome to the addiction that is modding your Kaiser.:)

[vicky_crispy]

Welcome to the addiction that is modding your Kaiser.:)

Yes Denko...I must say its a "Sweet Addiction" with no harmful effects other than sleepless nights until you get your thing working & explore the new side of your same old device :D...I am already in love with what i did to my kaiser..Its sumthing i never thought or dreamt of that we can do such things to our devices..But now i truly feel that every penny invested in this machine is Worth..Because we can always modify it..from features to looks & even performance with better research that these Docs do here..Feels proud & great to be among Creative poeple like you guys are..I am already enjoying the ride & am surre here to STAY :cool:

[kaiserII101]

Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job :cool:



I can't tell you what you want. You should try finding out on your own ;). Do what you wish with your kaiser, of course always be careful. Be sure to use the search button before creating a new thread and enjoy modding your kaiser. :D

[vicky_crispy]

I can't tell you what you want. You should try finding out on your own ;). Do what you wish with your kaiser, of course always be careful. Be sure to use the search button before creating a new thread and enjoy modding your kaiser. :D

Sure Sr. I still have the same Manila 3D runnin over Garmin's rom..And by suggestion i meant that I like the 3D interface very much..Now i was going through Android thing which i checked in some thread here & also checked it out on google..Now dnt have any idea how better is it going to prove than what i have right now..Plus it looks a little complicated too..So i will be looking forward to some advanced rom that has Touchflo 3D cooked by default along with pragrams & features which will complement & enhance the device..And off course with some nice graphics too..He he..See i'm being greedy here..I want all as a package..But i ain't demanding..Its just that if you have sumthing that appealed to you & you'd wanna advice to go for..Will be appreciated :D

[kaiserII101]

Sure Sr. I still have the same Manila 3D runnin over Garmin's rom..And by suggestion i meant that I like the 3D interface very much..Now i was going through Android thing which i checked in some thread here & also checked it out on google..Now dnt have any idea how better is it going to prove than what i have right now..Plus it looks a little complicated too..So i will be looking forward to some advanced rom that has Touchflo 3D cooked by default along with pragrams & features which will complement & enhance the device..And off course with some nice graphics too..He he..See i'm being greedy here..I want all as a package..But i ain't demanding..Its just that if you have sumthing that appealed to you & you'd wanna advice to go for..Will be appreciated :D


-G- actually has a Special Edition that has TF3D.
Link: http://forum.xda-developers.com/showpost.php?p=2642730&postcount=26

Note: Stand-by and landscape aren't supported

[vicky_crispy]

-G- actually has a Special Edition that has TF3D.
Link: http://forum.xda-developers.com/showpost.php?p=2642730&postcount=26

Note: Stand-by and landscape aren't supported

Hey Senior..Do you think The -G-s Special Edition TF3D ROM is better & faster than his DK.10 final ROM...I mean is there gonna be a difference in the speed as well as the Standby problem will also get fixed if i install that special edition rom on my Kaiser !! Also is there any other rom which has TF3D cooked by default apart from Garmin's..I believe he's not working on Kaiser's rom anymore as his DK.11 is still in pipeline..How do you find android compared to Manila 3D..I thought of getting Android on my kaiser..But just wanted to consult you before i do that..As really not sure if its really worth it..Also getting the files in place is also a problem..As Android has nt to b flashed like other usual ROMS !! Isn't it ?

[vicky_crispy]

-G- actually has a Special Edition that has TF3D.
Link: http://forum.xda-developers.com/showpost.php?p=2642730&postcount=26

Note: Stand-by and landscape aren't supported

Hey Senior...I tried installing Android 1.1 + Cupcake files on my Kaiser with -G-'s GK.10.Final Rom cooked in it..I am using Touchflo 3D with Manila 3D interface..I Used reference as mentioned in a link that shows Android working on a kaiser IE :- http://www.youtube.com/watch?v=tzhbCn5GGgA
Made Folder Android on SD Card containing Harret, Default.txt & Zimage as specified..Renamed Default-kaiser.txt to Default.txt too..Had Initrd, Data & System files on my SD Card root as well..The problem is when I am running harret..It starts loading linux but gets stuck at a point with error that reads :
[ 1.20063] Kernel panic - not syncing : YFS: Unable to mount root fs on unknown-block(0,0)
_



I have tried several times using several versions that i found..Edited default.txt file as well as specified..But most times it dsnt work..& when it does, it gets stuck at the point as i specified above. Can you please help me with what the problem might be. Is it with some file or with the Default.txt file that I am using for my Kaiser as i believe that's the source from where Linux runs on kaiser. I am using a sandisk 4 GB SD Card with FAT32 format..Please help !! :confused: