Impossible to flash any ROM radio , stop at 7%

[jetway72]

hi all, my situation in this:
i ve an htc s300+ with hardspl 1.30 installed that in boot loader write "WLAN error" , when boot it is blocked to 2nd screen (HTC logo). i ve try with any solution on this forum.. with mtty not solution, with "splxploit" no solution.. i understand that the problem is when i try to flash a Rom radio it don't wont load over 7% and reboot in boot loader, or a original italian complete rom WM5 it don't wont load over 13% but not reboot.
if i flash only the ROM WM6 coocked it load full but the problem is the same.. (after reboot blocket to 2nd screen)..i ve try to flash also directly with mini SD but the loading stopped after start (about 13%)..
the situation is the same if i load with "splxploit" the hardspl 1.20, or sspl 1.05 or 1.06...

i try all solution in my mind... but no resolve this problem..
can anyone with more experience that me to help?

thanks
sorry but i am italian and my english is not good..

[CWKJ]

I think you have not complete reading all instruction before you start.

HARDSPL Olipro 1.30 is not able to flash Radio Rom as feedback by many.

You should use Olipro 1.20 or Des's SPL.

[rs1turbo]

Sorry, I have the same problem,
How I can downgrade the H-SPL from 1.3 to 1.2 if the P3600 don't boot on, it is stop at startup logo HTC

Thx

[shym]

Just put your device manualy in bootloader and flash again...It should work ;)

[rs1turbo]

IT don't work.
The process it is ok at 100%, but if I put the pda in bootloader I have again 1.30

Where I wrong?

[SuperSport]

Have you tried to flash from SD Card? Maybe this would work differently.

[BigE]

As stupid as it sound, it worked for me. it seems the official WM5 rom has some recovery features. It takes forever to flash (and obviously it does some different stuff than cooked roms) but it took my bricked trinity from its brick mode at least twice the past 3 years. If you can't get hold on one, although I am sure it is on this forum, PM me and I will upload it for you. Just too tiered to do so if you have another source to take it from.

Look for RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30 .11_108_Ship. Be aware after it you may need to update the radio as well, but this is easy.

BigE

[rs1turbo]

Please upload the file!!!!!!!!

Thx

[BigE]

http://rapidshare.com/files/47349234/latest_dopod_wm6_anznospl.rar.html

BigE

[BigE]

http://cid-8231c261cbdd4326.skydrive.live.com/self.aspx/TriEVO/%E5%AE%98%E6%96%B9ROM/RUU|_Trinity|_CHT|_3.03.751.5|_6275|_1.56.70.11|_1 08|_Ship.part1.rar