View Full Version : USB connector broken..
dieterpapa
11th April 2009, 03:36 PM
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
galt
11th April 2009, 07:09 PM
PPC Techs repaired my HTC Universal when the USB connector broke, give them a try:
http://www.ppctechs.com/HTC-Advantage_895/repairs.htm
dieterpapa
11th April 2009, 09:21 PM
Thanks galt,
but seems to me a little bit far away.....:(
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
galt
11th April 2009, 09:25 PM
Sorry, I forgot to check your location... HTC might have a repair center in Europe...
cyberjak
3rd June 2009, 12:58 AM
Thanks galt,
but seems to me a little bit far away.....:(
Would prefere a source to buy spares and do it by myself or have a repair service in Germany or even Europe...
Dieter
i don't know how it works with "The Phone warehouse" but here in the uk their parent company Carphone Warehouse have usually a flat fee for repairs, maybe ask The Phone Warehouse what they might charge ?
conalmittal
3rd June 2009, 10:06 AM
I think you can open and try to solder usb pin on your own.
its should not be that difficult task.
I have done this with my Motoming
dieterpapa
3rd June 2009, 08:39 PM
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder :(:(
Dieter
But I'll ask phone warehouse in UK.
conalmittal
4th June 2009, 09:09 AM
Hello,
have already opened the device. Sadly it's not only a standard USB connector but a special HTC connector with about 10 connections...it's nearly impossible to re-solder :(:(
Dieter
But I'll ask phone warehouse in UK.
do it if you can as if you solder wrong pins than there would be a problem
and word impossible itself says i m possibles :)
responderman
5th June 2009, 01:07 AM
Hi all,
my Athena fell down while charging (kiddies.....) - now it seems to me that the connector is broken somehow. I can't chrage the device anymore and don't get contact to my PC anymore.
Warranty exchange isn't possible due to customized ROM. What can I do ?
Dieter
As a temp setup, why not get a docking base. they normally have a battery charging on them too. Keep you going until you find a repairer. they come up on ebay
Jay
.......Or THIS (http://cgi.ebay.co.uk/ZC70-travel-desktop-charger-for-T-moblie-MDA-Ameo_W0QQitemZ350121925426QQcmdZViewItemQQptZUK_Au dioTVElectronics_PDAsAccessories_PDACharger?hash=i tem5184e49b32&_trksid=p3286.c0.m14&_trkparms=72%3A1690%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318%7C301%3A0%7C293%3A3%7C294%3A50) even?
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.