stim141
15th April 2009, 06:08 PM
I have a HERM200 (TYTN HTC Branded). I definately have a hardware error that seems to be related to motherboard pressure. Totally took the phone apart - cleaned everything and reseated connections. I initially did have problems flashing a radio/OS Rom due to NO GSM errors - but I did get a complete working flash. For a week the phone has been sitting on my desk without a SIM card on standby. Power cycled it a few times and the radio will always come on. Can turn the radio on and off with flight mode. Always comes back. Turned on WIFI and Bluetooth no problems. Do have a Dpad problem where the direction button will stop working unless I move the scroll wheel. Other than that it doesn't freeze even under load and don't have white screens or no return from standby. So doesn't seem to be heat related - ie processor heat.
OK, put a sim card that works fine in a 2125 and I can make and receive calls. Did it for many calls last night - received and made the calls. Send text messages. Opened the slider several times. No problems. Battery was down so I charged it though a USB connection. Got the battery up to about 50% Still can make and receive calls doesn't seem to "hunt" for a signal which the phone would do if the radio was failing.
Removed the SIM card this morning and put the battery back in - received the first NO GSM after about a week. Removed the battery and touched the metal plate behind the battery and the GSM came back on bootup. The case screws are snug not super tight.
Is is possible that the motherboard is either faulty - removing the SIM caused it to flex or touching the battery back plate flexed or reconnected some chip.
IMHO the battery plate backer is WAY too close to the motherboard and is either putting undue pressure on the motherboard chips or when the battery is charging it somehow expands slightly causing pressure points. Seems like the battery backer plate is sitting directly on the chipsets.
Any thoughts - seems like there are way too many NO GSM errors for this phone.
OK, put a sim card that works fine in a 2125 and I can make and receive calls. Did it for many calls last night - received and made the calls. Send text messages. Opened the slider several times. No problems. Battery was down so I charged it though a USB connection. Got the battery up to about 50% Still can make and receive calls doesn't seem to "hunt" for a signal which the phone would do if the radio was failing.
Removed the SIM card this morning and put the battery back in - received the first NO GSM after about a week. Removed the battery and touched the metal plate behind the battery and the GSM came back on bootup. The case screws are snug not super tight.
Is is possible that the motherboard is either faulty - removing the SIM caused it to flex or touching the battery back plate flexed or reconnected some chip.
IMHO the battery plate backer is WAY too close to the motherboard and is either putting undue pressure on the motherboard chips or when the battery is charging it somehow expands slightly causing pressure points. Seems like the battery backer plate is sitting directly on the chipsets.
Any thoughts - seems like there are way too many NO GSM errors for this phone.