Anyone wm 6.5 savy?

[mbaseball3]

I flashed to NFSFAN's wonderful 6.5 rom for sprint vogue. After doing so I have lost ability to connect to internet and connect to active sync. Active sync gives me an error your device has malfunctioned over and over again. I've already tried the Start -> Settings -> Connections -> USB to PC, uncheck 'Enable faster data synchronization' for active sync with no luck. In the past when I've done a hard reset, I then also had problems connecting to the internet. Even called sprint whom couldnt help. Went through the ## codes to get to the M.IP default profile where the NAI was and it read about 7 numbers @sprint blah blah blah along with my public key in some symbols and signs. After changing my NAI to the proper address the phone would initiate the iota and everything would be dandy. Not so much with this 6.5. I love it but I need internet in order to survive lol at least until the rhodium :D Even if I can get back to the 6.1 rom, how would i be able to do that without the active sync connection? Anywho, help please? Thanks

[Detroit_Doug]

I flashed to NFSFAN's wonderful 6.5 rom for sprint vogue. After doing so I have lost ability to connect to internet and connect to active sync. Active sync gives me an error your device has malfunctioned over and over again. I've already tried the Start -> Settings -> Connections -> USB to PC, uncheck 'Enable faster data synchronization' for active sync with no luck. In the past when I've done a hard reset, I then also had problems connecting to the internet. Even called sprint whom couldnt help. Went through the ## codes to get to the M.IP default profile where the NAI was and it read about 7 numbers @sprint blah blah blah along with my public key in some symbols and signs. After changing my NAI to the proper address the phone would initiate the iota and everything would be dandy. Not so much with this 6.5. I love it but I need internet in order to survive lol at least until the rhodium :D Even if I can get back to the 6.1 rom, how would i be able to do that without the active sync connection? Anywho, help please? Thanks

Did you hard reset and attempt again? if so then...

Download and install the DCD Sprint Carrier Cab HERE (http://rapidshare.com/files/223055792/dcd_Sprint_Carrier_20090109.cab.html)

The your have the Sprint settings and tools to connect

Detroit Doug

[mbaseball3]

Did you hard reset and attempt again? if so then...

Download and install the DCD Sprint Carrier Cab HERE (http://rapidshare.com/files/223055792/dcd_Sprint_Carrier_20090109.cab.html)

The your have the Sprint settings and tools to connect

Detroit Doug

Ok cool. Thank you sir. I shall give it a try.

[mbaseball3]

oops wait, i forgot i cant connect to internet or active sync :(

[Detroit_Doug]

oops wait, i forgot i cant connect to internet or active sync :(

Can you access your SD card via your PC? move the SD card to PC, copy to it, put SD card back in phone, turn phone on, wipe hands on pants ...

Otherwise with ANY custom ROM I always suggest, flash, let customizations run, hard reset, let customizations run, use phone, dance in your pants

for some reason it eliminates issues (like your having) from happening nearly as often or at all

Detroit Doug

[codybear]

I have that exact same rom.
All I did was run the dcd cab for my carrier,
Do you have alltel by chance?
because if so I have the arcsoft cabs you'll need to run for mms.
Otherwise you'll have to search for your carrier's mms cabs.

And whenever you plug your phone into the computer there should be a screen that pops up that says "Connect To Pc" on the top and has three options,
Activesync,
Disk Drive
Internet Sharing

If you don't look at the screen for like 30secs after you plug your phone in to your computer you'll miss that screen.
So pay attention to it.

That's all I can think of right off the top of my head.
Any other questions?

[mbaseball3]

Can you access your SD card via your PC? move the SD card to PC, copy to it, put SD card back in phone, turn phone on, wipe hands on pants ...

Otherwise with ANY custom ROM I always suggest, flash, let customizations run, hard reset, let customizations run, use phone, dance in your pants

for some reason it eliminates issues (like your having) from happening nearly as often or at all

Detroit Doug

ok so i used my girlfriends diamond to download the sprint dcd and beamed it to my vogue. (not at a computer yet to try the sd way) apon attempting to install the cab i keep getting download unsuccessful. what did i mess up now? im ready to dance :)

[Detroit_Doug]

ok so i used my girlfriends diamond to download the sprint dcd and beamed it to my vogue. (not at a computer yet to try the sd way) apon attempting to install the cab i keep getting download unsuccessful. what did i mess up now? im ready to dance :)

How did you do that??? the HTC Vogue (Touch) does NOT have IR for beaming
its got bluetooth and internet when working ..

Detroit Doug

[atoz350]

I think he beamed it via bluetooth. My friends and I use that to send pictures back and forth.

[mbaseball3]

I think he beamed it via bluetooth. My friends and I use that to send pictures back and forth.

yes exactly I used the bluetooth to beam. I googled for the dcd cab from a different site that worked and now my problem is the dreaded error code 67 and 1012 from the client iota. I know my sprint web address is right but I don't know the password so obviously gonna have to call sprint. thanks for your help guys. im sure ill have more questions before I can dance about :)

[chrispipe]

yes exactly I used the bluetooth to beam. I googled for the dcd cab from a different site that worked and now my problem is the dreaded error code 67 and 1012 from the client iota. I know my sprint web address is right but I don't know the password so obviously gonna have to call sprint. thanks for your help guys. im sure ill have more questions before I can dance about :)

I think for sprint, it's the same as for Telus, in that you set it to #777 and leave username/password blank - HOWEVER - if in EPST your M.IP settings are wrong, it will not connect, and you will be greeted with "Cannot connect for an unknown reason" on the device. Your carrier should be able to give you the info for the setting you need to correct. To get to the setting you need your MSL, pop in ##PST# or whatever, and it's in there under view info - M.IP Default Profile. make sure it's set to ENABLE and the NAI is correct. For Telus it's your mobile number@mb.telusmobility.com. Not sure what Sprint would be here. You'd have to ask someone with sprint.

If you've done all this already, and I've misread/not read that part, I apologize! Hope this at least points you in the right direction for solving your problem though! No data is no good!

[sjdickman@gmail.com]

mbaseball3, did you solve your problem?

[mbaseball3]

yes everything is almost working properly. thanks guys! my only problem though, still, is activesync on my computer still does not recognize my phone. I've been basically stumped. one great feature of this rom though is the PIM backup =D life saver. still a pain though not being able to sync phone with comp and having to go the long way of using storage card for loading and unloading things. still open for trying to solve this problem though if anyone has possible solutions. thanks all again

[Detroit_Doug]

yes everything is almost working properly. thanks guys! my only problem though, still, is activesync on my computer still does not recognize my phone. I've been basically stumped. one great feature of this rom though is the PIM backup =D life saver. still a pain though not being able to sync phone with comp and having to go the long way of using storage card for loading and unloading things. still open for trying to solve this problem though if anyone has possible solutions. thanks all again

Are you using either 64bit version of Vista or Windows7? if so I know I had to completely uninstall and then fully re-install WMDC (Windows Mobile Device Center) to make my phone sync with my PC again

Detroit Doug

[atoz350]

Are you using either 64bit version of Vista or Windows7? if so I know I had to completely uninstall and then fully re-install WMDC (Windows Mobile Device Center) to make my phone sync with my PC again

Detroit Doug

Yep. Same thing here. Switched to Windows 7 x64 and had to re-do everything. Outlook even erased all of my contacts on the first sync so back them up first! Once I restored them, all is well.

[mbaseball3]

I'm actually still using windows xp. by the time I got around to wanting to try out windows 7 microsoft shut down the download. no biggie though.

[atoz350]

I'm actually still using windows xp. by the time I got around to wanting to try out windows 7 microsoft shut down the download. no biggie though.

Its open now until June.;)

[akatcl]

yes everything is almost working properly. thanks guys! my only problem though, still, is activesync on my computer still does not recognize my phone. I've been basically stumped. one great feature of this rom though is the PIM backup =D life saver. still a pain though not being able to sync phone with comp and having to go the long way of using storage card for loading and unloading things. still open for trying to solve this problem though if anyone has possible solutions. thanks all againgo to start->settings-> connections-> "USB to PC" -> then check off "activesync" and "ask me first..." Even if they are correctly checked, check something else off, soft reset, then put them back as they are supposed to be.

[mbaseball3]

ok my activesync issue is no longer an issue. thanks for all the advice folks. something so simple cured it =D I just uninstalled then installed activesync (yes newest version from ms) and it worked. ta-da! shoulda been something done first but didn't think about it. doh!!

[akatcl]

ok my activesync issue is no longer an issue. thanks for all the advice folks. something so simple cured it =D I just uninstalled then installed activesync (yes newest version from ms) and it worked. ta-da! shoulda been something done first but didn't think about it. doh!!

Glad your activesync issue cleared up.

Can you tell me how you got data working again? It took some time on the phone with verizon before they could get my newly flashed 6900 activated then I had to download a prl file myself to get rid of the roaming indicator. But I still don't have data working.
Thanks!

[mbaseball3]

Glad your activesync issue cleared up.

Can you tell me how you got data working again? It took some time on the phone with verizon before they could get my newly flashed 6900 activated then I had to download a prl file myself to get rid of the roaming indicator. But I still don't have data working.
Thanks!

hmm yeah I had exact same thing, could make phone calls but no data. I too was on phone with customer service on sprint for about an hour and a half. rep had me hard reset once. problem was with the iota not lining up with sprint. they had to basically cancel me out then reinstall my info back into their system which then opened it all up. rep then just had me punch in my new msid and all that junk. after that I tried to access internet, and everything just began falling in place. iota did its thing. hope that kinda helps. long winded and all lol. but that's my story and I'm sticking to it