Alpine ROM 1.11.00 WWE with Radio 1.04.00 and ExtROM 1.11.180

[pietsukkel]

Hi guys!
Here is my last contribution to the Alpine, before buying a Touch Pro 2. ;-)
This ROM is based on the most recent O2 ROM. I removed all O2 stuff and replaced the Bluetooth 1.0 drivers with version 1.6 drivers.
This ROM also contains the most recent TomTom version for WM2003 which supports the latest version 8 maps!
Enjoy!
Piet

http://rapidshare.com/files/230517324/Alpine_ROM-1.11.00WWE_Radio-1.04.00_ExtROM-1.11.180.zip

[uearoom]

RAPIDSHARE ERROR MESSAGE

Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.

This limit is reached.

To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.

[pietsukkel]

RAPIDSHARE ERROR MESSAGE

Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.

This limit is reached.

To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
I replaced the link with a permanent one.
Good luck!

[Davvan1]

Hello!
Which version of Tomtom is it?
And what version of maps can i use?

[soloman1]

Thanks looking forward to giving it a go.

[htcclay]

sorry...wrong post

[M4cc45]

Are there any faults with this? Any problems?

[soloman1]

this rom is perfect, working a dream for me, hav noticed the radio dosnt get as hot as used to.

[M4cc45]

Thanks for letting me know - I will give it a go!

[pietsukkel]

Hello!
Which version of Tomtom is it?
And what version of maps can i use?
It's TomTom Navigator 7.910 (9185) and please read my post properly: it supports the latest version 8 maps.
Kind regards,
Piet

[Numberz]

hi, iv got an error :-

120 country id error 22-22-22-Qugn-17

any ideas ?

[Direct3D]

hi, iv got an error :-

120 country id error 22-22-22-Qugn-17

any ideas ?

just close it. And run again.

[pietsukkel]

hi, iv got an error :-

120 country id error 22-22-22-Qugn-17

any ideas ?

Hi!
It looks like your device isn't a world wide English (WWE) device.
There is a thread about changing the country code on a Himalaya (http://forum.xda-developers.com/showthread.php?t=228852) which should be usable for the Alpine, but it involves some hacking into the firmware definition file. Decide on your own risk.
Piet

[killavirus]

rapidshare seems to of died

if somebody can send me the file i will be more than happy to host it

[hermanzeegerman]

Hi, How long is the update supposed to take?

It has been running for about 45minutes now and all that is on the handset display is...
USB





V1.01

My laptop says it is still "Checking the information on [my] device... Please Wait..." Even though it has already shown me my previous firmware versions and asked me to confirm upgrade.

Thanks
Dom

[hermanzeegerman]

After 4 hours and a call to O2 it would appear this update has crashed after erasing my phone...
I have now attempting to run the O2 official ROM install and the handset is no longer does anything...
Any ideas people or is my phone now a paper weight?
Thanks
Dom

[cbnc]

Does it say anything on the xda screen

[hermanzeegerman]

Not now... :(

[cbnc]

try pluging it back into pc and running MaUpgradeUt_noID.exe again see what it say's

[hermanzeegerman]

handset doesnt do anything, computer comes up with a communication error...

[cbnc]

sorry been away. silly question do you have active sync installed

[hermanzeegerman]

everything was fine before i ran the ROM updater...

was synced to outlook... came up a usb modem and all the rest of it...

this updater has erased the ROMs... i need to know if ROMs can be installed on a blank device...

thanks

[pietsukkel]

Hi Herman!
Follow the instructions in another topic (Alpine Stuck at Bootloader: How to solve this.) in this forum: http://forum.xda-developers.com/showthread.php?t=341564
The hang is not caused by the ROM itself, it's 100% so just try to reload it using the instructions in the link above.
Kind regards,
Piet

Instructions How to Enter into BootLoader mode:
Press and hold the “Power” & “D” (navigation) buttons,
and then press the Reset Button until “Serial” shows on screen.
Plug device in the cradle. “Serial” will change to “USB”
Execute the file MaUpgradeUt_noID.exe from the ROM upgrade I supplied.

[kidkybo]

Probably silly questions but I'm new to all this.

I have Orange SPV M1500 (locked at the minute) but phone does not work.
Full device Info
Op ver = 3.11.1.167
ROM ver = 1.11.00 WWE
ROM date = 01/27/05
Radio ver = 20000
Protocol ver = NONE
ExtROM ver = 1.11.167 WWE

If I unlock the unit will this new rom program work (I noticed it said for O2)? I don't know how to get my phone working.

Help muchly appreciated.

Ta,
Scott

[pietsukkel]

If I unlock the unit will this new rom program work (I noticed it said for O2)? I don't know how to get my phone working.
You should indeed unlock the device first (http://forum.xda-developers.com/showthread.php?t=240784). Afterwards you should be able to apply this ROM.
Regards,
Piet

[kidkybo]

Many thanks for the answer (and link).

I will indeed try unlocking it and running your ROM.

I have nothing to lose.

It being an O2 ROM will not affect me using an Orange sim, afterwards?

Thx again,
Scott

[pietsukkel]

It being an O2 ROM will not affect me using an Orange sim, afterwards?
Nope! Been there, done that!

[kidkybo]

Soory Pietsukkel,

Got my thick head on: I have downloaded and ran the unlock tools - don't know if they've worked properly (no other sim to try). All said failed on screen but got a lot of text in the log file that maybe suggests different. Any way of knowing? One thing that has changed: the antenna used to have a '!' next to it, stating No service. Now it has a 'x' and states flight mode (wireless off), although every reset returns it too original state of no service.

Also, have I missed the instructions anywhere on how to use your rom tool? I haven't a clue.

Maybe it's my dodgy radio (20000) and protocol (NONE) numbers that are screwing the unlock up.

Thx,
Scott

[kidkybo]

This is what the log file says when running v1.5.
"xdadev_all_unlock started
device=PH10D
key found
ril ioctl 0xc2: 00000000
simlock answer: User mode registers [r0-r15] = ...

800D03FA 0082409C 000D03EA 00000800

EA003FFD EA003FFD EA003FFD EA003FFD

EA003FFD EA003FFD EA003FFD FFFFFFFF

FFFFFFFF 00000000 00000000 00000004

User mode CPSR = 200000fa

Magic Word + Index of Vector = dead0002

Exception: Abort Undefined Instruction

Bottom 20 words of User mode stack = ...

B4CAEFFE CA2DDCDC E1BA07E1 36D112F8

A41DB83A 61E27355 9FACE119 7EA4FB9F

375BD1E8
invalid sim lock answer
error getting current lock status
xdadev_all_unlock failed
ril ioctl 0xc2: 00000000
ril ioctl 0xc6: 00000000
"
I have no sim in the unit. Any ideas on what to do/try next gratefully received.

Thanks,
Scott

[johnkunha]

Hello everyone,
May someone give me a quick guide in how to instal this upgrade??:confused:
I have a Qtek 2020i for 6 days.. So this is all new for me..
Sorry for my noviceness..:(

[evangelion04]

thank you so much
and hoping for the WM 5 or 6
:p:D

[saintbpp]

I would try to upgrade my ROM.
Thank you very much:)