PDA

View Full Version : How to Hardspl


guntcent
6th May 2009, 10:32 PM
Im a newbie at this sorry... i want to flashed Ivans rom Juststable 15v10LZX version but i dont know how i have a 1GB micro SD card n followed all instruction and still it doesnt work..:(

ivanmmj
7th May 2009, 12:11 AM
The instructions work. I've done it two or three times.

guntcent
7th May 2009, 12:12 AM
can u show me step by step please ivan :) i wanted to use your rom in LZX version for more space

husker91
7th May 2009, 05:20 AM
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:

HTC P4350
XDA Terra
WING

with IPL 4.xxx and higher!!! (that is IMPORTANT)

and then follow this:

Default
For me it was working when:

1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab

4. SOFTRESET

5. run RUU from Hard-SPLWM6 folder verison 4.70.yang

6. screen will become white - WAIT until it reboots itselfe.
7. done!

check if SPL now is 4.70.yang

Fore sure: I used this

http://rapidshare.de/files/38148213/...l_WM6.rar.html

mirror: http://www.sendspace.com/file/ot8zsn

It worked for many others, too.




Credit to: papamopps

I have used it many times and it works like a charm.

guntcent
7th May 2009, 05:27 AM
now im havin trouble flashin a rom through a sd card

unknown123456
7th May 2009, 10:51 PM
now im havin trouble flashin a rom through a sd card

What trouble are you having? Did you rename the ****.nbh file to HERAIMG.nbh and placed it at the root of your SD card? If you did that already, close your device. Hold onto the camera button for about 7 seconds and then press your power button once. It should automatically go to a screen where it says searching for SD card or something like that. If it goes directly to the blue/red/green YANG page, it means something is wrong. If it continues on that white screen dealing with SD card, it will eventually give you 10 seconds to choose whether or not you want to flash the HERAIMG from the SD card. When the timer starts counting, press your volume control slider down once and the process will start. It will start reading from your SD card. When it's done, your phone WILL tell you that it was successful and you need to press any button. Once you do that, it will go back to the blue/red/green YANG page. Just shut down your phone at that point and power it back up. After that, you patiently wait until you get the alignment screen.

guntcent
8th May 2009, 01:02 AM
What trouble are you having? Did you rename the ****.nbh file to HERAIMG.nbh and placed it at the root of your SD card? If you did that already, close your device. Hold onto the camera button for about 7 seconds and then press your power button once. It should automatically go to a screen where it says searching for SD card or something like that. If it goes directly to the blue/red/green YANG page, it means something is wrong. If it continues on that white screen dealing with SD card, it will eventually give you 10 seconds to choose whether or not you want to flash the HERAIMG from the SD card. When the timer starts counting, press your volume control slider down once and the process will start. It will start reading from your SD card. When it's done, your phone WILL tell you that it was successful and you need to press any button. Once you do that, it will go back to the blue/red/green YANG page. Just shut down your phone at that point and power it back up. After that, you patiently wait until you get the alignment screen.

mine goes directly to the red blue green screen and wat u mean by the root of my card can u be specific please

ivanmmj
8th May 2009, 01:28 AM
The root means the card without being in a folder. That's what root means.
If you're getting that, your SD card might be too slow. That's when you'll have to worry about partitioning your card.

guntcent
8th May 2009, 02:04 AM
yea then partition it is my last option n wat kind of sd card works ill go buy a new one

unknown123456
8th May 2009, 08:51 AM
yea then partition it is my last option n wat kind of sd card works ill go buy a new one

You should use a MicroSD card under 2GB. You can try partitioning it to FAT or FAT32. See if that works before you buy another microsd. I use Kingston and Sandisk. Both brand works fine for me.

guntcent
9th May 2009, 12:58 AM
i have a 1GB card and im goin o try it rite now