Stuck en bootloader

[beastmichel]

Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)

[beastmichel]

Please need some help ( a lot)

[dioxda2]

Maybe its in a forum,but I have looked everywere.I just sold my S200
(i bought a HD) and the S200 died...... It is in the bootloader and I have tried everything.
1. Pressing all buttons = Format failed
2. Spl can be loaded again, but no with a exe.
3.All roms can be instaled (but not al exe). If a rom installed 1
file (exe) it doest not work. I installed al least 20 rom (wm5,wm6 ect...)
All can be installed and at the end you get 100 % and finished......
I opened the S200 and the button on/of seems to be ok.
4. In the bootloader sceen I get :
IPL2.09.001
SPL 2.G4.4PDA
I am desperared because I am fixing it since a few weeks with....no result.
PLEASE, I NEED SOME HELP
(PD I am from Belgium and living in Spain)

Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,

if your Prophet works fine after that, you may flash any rom you like :),
...try to read my thread and....Good luck and :)

[beastmichel]

Dear Dioxda2.

Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.

Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.

Any sugestion ??

[dioxda2]

Dear Dioxda2.

Thanks for your comments but I think that I do not understand it all.
My S200 is in the bootlader and I did the following (your manual) :
The pda goes automaticly in the bootloader when on, with the USB words
in the screen :
1.When I try to to inslall a spl , it stays in a green screen with ipl and spl data.Nothing can be installed until baterie is removed
2. Tried to install the NVID but stops ant 80 % with error 326.
3. Tried to install Lazy tool : I put the nbf file in the lib file and install the rom
100 % and I reboot in the bootscreen (fustrating)
4. Tried to insall WM5 and the same like the lazy tool instalation.

Never activesync is connect.That why (I think) that somo roms can not be installed, like a wm5 only os.

Any sugestion ??

1. you may safe your prophet ONLY if you successfully flash the NVID, (just don't look at the connection status between PC and Prophet, as it was forced to bootloader mode, just run the NVID and flash dtraight until it ends, be awared that, NVID needs time to flash, sometimes needs more than 5 minutes, so ... wait for it ! )

2. I hope you can make it or you need to bring your prophet to factory due to abnormal flashing (wrong flashing)...


Good luck :)

PS.

Lazytool......

you should place your favourite XXX.nbf file next to the "LazyTool-Start.cmd" or "upgrade.cmd", but NOT in the LIB folder.... +_+

+_+ +_+ +_+ +_+ :(

[marekPLPH]

Dear dioxda2..


i think this is the same problem as my S200 :((


mine wasnt on the software prob but hardware...


to: Threadstarter :))

try bringing your Mobile to any qualified technician near your place.. something might have been wrong inside... like mine its the comm and cam buttons that are grounded thats why its always in bootloader.. no matter what software i flash its still the same... :)


hope this helps

Mark

[beastmichel]

Dear Marekplph,

Can you explain me what do you mean with grounded. Do you mean a
short circuit (negative). Is it dificult and expensive to fix ?

Thanks,very helpfull

[noonas]

Try to flash the NVID from Here http://forum.xda-developers.com/showthread.php?t=353547,

if your Prophet works fine after that, you may flash any rom you like :),
...try to read my thread and....Good luck and :)

I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.

the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?:confused:

[dioxda2]

I have tried pretty much all the Lazu Guides and prohpet tools.
Most of the time I get the Invalid update tool error.
Maybe the person in this thread has the same problem I have.
I have a G3 Prophet (Qtek S200), that has been flashed with a G4 Rom.
Not it is stuck in tri-color screen and nothing seems to help.

the prohpet tools I downloaded gives me errors and there is little documentation of where to put rom files etc. Maybe you know?:confused:

if you want to make a fast move, bring it to the factory.... :(

mess up upgrade code (G3 and G4) ... sorry... doomed. :(

[marekPLPH]

yes in my country its cheap.. coz something inside short circuited and that keeps my camera button pressed and taking pictures of his own < scary > if you cant fix this try to visit an authorized technician that can fix this for you...

[beastmichel]

ok, will send the s200 to the SAT (repair). I don´t have other options.:mad: