error 270, need some help from the experts

[zPacKRat]

I have a Tilt that has been security unlocked, currently using Hard spl 3.56.

I have been having issues flashing certain ROMs, a few of them are Garmin's DK10 Final, Anryl's 21232, and some others.

Regardless if I flash using USB or SD Card certain ROMs will error out. If I'm using windows to flash I get the error 270, which is not in the wiki. Also this happens after it shows a complete load of the rom at the point where the phone reboots. If I flash from SD Card it will get better than 80% then error out with a code of 00018003.

Now this does not happen on all roms, for instance I can flash DK8 Final and Anryls 21222 rom with success just as an example.

What I've done, today I went so far as to flash the radio from hell (even though I doubt I needed to so that I can follow the recovery guide again (I was stuck with the radio from hell for a while when I flashed the AT&T rom that included it and used the guide to recover from it and in the process Security Unlock my Tilt) so I could format my entire device.
I have tried different versions of Hard SPL, Different radios, downloaded the suspect roms several times on several computers at home and work with the same results.

MTTY shows no issue with the NAND that I could find.

Any help with this issue would be greatly appreciated.
z

[thefatboy]

Upgrade error number 270 means that the bootloader is not correct for the rom you are trying to flash, have you installed Hard SPL 1.20 (or a later version) to your device before attempting to upgrade, and could you tell me which rom you are trying to flash to your device?

[zPacKRat]

Upgrade error number 270 means that the bootloader is not correct for the rom you are trying to flash, have you installed Hard SPL 1.20 (or a later version) to your device before attempting to upgrade, and could you tell me which rom you are trying to flash to your device?

Garmin's DK10 Final, Anryl's 21232 and as stated I've tried several versions of HardSPL, was using 3.56 I have tried 3.34 which is the one Anryl states he is using. Same issue.

[thefatboy]

I would recommend cmonex (.hard2) 3.31 Hard SPL nostuckinSPL Force USB as I have flashed all the roms you listed with this, with out any problems, have you also tried to flash a stock rom first I know this approach is old school but still worth a try

[zPacKRat]

I would recommend cmonex (.hard2) 3.31 Hard SPL nostuckinSPL Force USB as I have flashed all the roms you listed with this, with out any problems, have you also tried to flash a stock rom first I know this approach is old school but still worth a try

Yeh, htc and at&t stock 6.1 roms install without issue

[anryl]

hard spl and super cid again :cool:

[zPacKRat]

hard spl and super cid again :cool:

just did this and it made no difference. still failing!

What is odd is it only happens with certain roms.

[zPacKRat]

Yeh, htc and at&t stock 6.1 roms install without issue

I take this back, I tried the 6.1 rom for the tilt and it fails as well.