Cannot Sync anymore - serial NOT usb on BootLoader Screen

[fairmang]

IGNORE BELOW I GOT IT RESOLVED. On the phone itself the female usb connector had 2 of the 5 "connectors" entangled with each other inside. I am going to be careful from now when I plug any usb cables in it :)


Hi All

I cannot seem to sync my phone using any USB cable anymore (ERROR [260]: CONNECTION). It charges fine, but the computer does not see the phone at all. I have tried different cables, different computers, but no luck. I have Actisync 4.5 installed. When I try to reinstall the ROM also (Power + OK button) I am getting "serial" showing at the bottom of the screen instead of "USB". Any ideas what is causing this? The phone is working great otherwise. Every single feature works except USB :(. Note Well: The phone is NOT stuck on BootLoader screen, it boots up fine.
Is it possible it's the USB connector on the phone is damaged? But as I said it does charge the phone when connected to the computer.
PS I also did a "clear storage" to default the phone back to the current ROM I have installed and also I have checked "usb to pc" enabled on the phone.

HTC TYTN

HERM200
IPL-1.01

HERM200
SPL-1.40.Olipro

Windows XP SP3

Thanks.

[ultramag69]

If you have this problem, try the SD card method....
(assuming the Hermes has Hard SPL v7 installed)

1. Format sd card FAT32. Copy .nbh file of the rom you want on and rename to hermimg.nbh .
2. Insert SD card into Hermes and reset to bootloader.
3. Assuming all things are right, follow prompts...

Cheers...:D

[StefanHou]

If you have this problem, try the SD card method....
(assuming the Hermes has Hard SPL v7 installed)

1. Format sd card FAT32. Copy .nbh file of the rom you want on and rename to hermimg.nbh .
2. Insert SD card into Hermes and reset to bootloader.
3. Assuming all things are right, follow prompts...

Cheers...:D

Hi Ultramag

Hmm, sorry it does not work for me, as previsouly discussed, it got me stuck on bootloader with 'Serial' below.