PDA

View Full Version : USB Cable Disconnected During ROM Install. Did I Brick It?


Dubyabee
27th May 2009, 11:43 PM
I was attempting to unlock the GPS on my XV6900 after installing the official Verizon WM 6.1 update, following the instructions on the PPC Haven wiki here: http://wiki.ppchaven.com/index.php?title=Pocket_PC_WIki:FIX_VERIZON_GPS.

I got through the unlocking with 0.40 coke and was flashing 'Flash Sprint ROM RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_ Ship'.

At 13% completete the usb cable was disconnected. I'm now stuck on the rainbow screen with the following info displayed:
VOGU100
SPL-0.36.0000
CPLD-3

'RUUNBH' is displayed in the upper right hand corner.

I tried to reflash the sprint ROM and unlocking with 0.40 coke again without any success. My laptop does not recognize the device when connected via usb, so active sync is also not working.

So this is my last hope. Is there anyone out there who can help out a noob, or did I damage my phone beyond repair?

Thanks in advance for your help. I did a search before posting, but didn't come across the answer. Sorry if I missed it

Dubyabee
28th May 2009, 01:35 AM
Anyone? Is it bricked?

t1mman
28th May 2009, 04:58 AM
you could try this out, if you have a microSD (non HD, wich mean, 2go or less)

1. Download NSFAN's latest Sprint WM6.1 Rom and extract to desktop
2. Rename ROMFILE.nbh to voguimg.nbh
3. Copy voguimg.nbh to MicroSD card that has been formatted to FAT32
4. Insert MicroSD card in phone, and enter bootloader via holding down the Power/Camera/Reset buttons all together.
5. Flash ROM
6. Hard Reset Phone


Good luck!

thoughtlesskyle
28th May 2009, 10:02 PM
try the sprint rom with the RUU, even tho it says you need an active sync connection as long as the phone says USB at the bottom of the bootloader screen you can start the update

Snakehn
29th May 2009, 03:36 AM
same happened to me when updating the official verizon 6.1, i took the battery out for like 20 mins and then retried and worked.