PDA

View Full Version : New ROM, Some Questions


DasEtwas
1st June 2009, 03:34 PM
Hi Guys
I need your help right now...
It's my first time I'm trying to flash my MDA VARIO II form WM 5 to WM 6.
I found this ROM here in the Board:
http://forum.xda-developers.com/showthread.php?t=359917&highlight=Shamanix_WM6_Ultimate_v2_FINAL
I also installed HardSPL 7 Using this guide:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
And now I want to install the new ROM Using this Guide and the File above:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
But when I click Autodetect it says: Error! Unknown Version.
Sorry for asking so stupid questions but i am a bit confused right now and I really don't want to crash my phone, this would be a mess....
Can Anybody Help me?
And is there Anything else to look after? I read something about CID unlock in the wiki, is this done by installing HardSPL?
ty so far
DasEtwas

Scotty93
1st June 2009, 07:39 PM
First i would suggest reading the wiki pages as you may find something that could help, also it may not be detecting it as you do need to press accept or yes to run something on your hermes. although if it doesnt detect it you can see what spl you are running (press ok, power and reset button together) from there you can select what version you have on your devise it will also check whether hard-spl worked.

Hope this helps and good luck :D

DasEtwas
1st June 2009, 11:48 PM
Hard SPL is installed and I read the wiki, but I don't get behind the CID^^
The question is: Is this ROM Above comaptible to my MDA Vario? And anyway what is this CID?
Ty so far :)
DasEtwas

ultramag69
2nd June 2009, 09:36 AM
If you downloaded it from the Hermes section then yes...
As you have Hard SPL V7(?) (check if SPL is 2.10 oli), try the sd card method...
1. Format sd card FAT32. Copy .nbh file to it and rename to hermimg.nbh .
2. Insert sd card into Hermes and reset to bootloader, Scotty93 told you how.
3. Follow the prompts...

Easy... :D

DasEtwas
2nd June 2009, 11:32 AM
Yes I installed Hard SPL V7 and in the bootloader it says SPL 2.10 olipro.
I will try the method now :) *Wish me good luck*
ty so far
DasEtwas
Edit:
Hm i don't have an Adapter for the Micro SD Card, is it possible to copy the nbh File onto the Card using Active Sync, while it's in the Phone?
Edit: Hm n1 one I tried to formate my SD Card (Yeah I found the Adapter) but windows had an Error and now it hangs up everytime I try to access the card....